Thanks for comment Addam 🙂 I enjoy both nitro and electric. If I'm being honest I would say both nitro and electric causing severe headache occasionally 😂 but almost always because I stressed and missed something obvious 🙂
Hi 👋 I have owned it one year now. So far, I haven't broken anything 🙂 I was a little afraid because others had problems that the spur gear was stripping. But I'm pretty sure that's because the mesh wasn't set correctly. I'm very happy with my Inferno neo 👍
@@electricnitrorc Thank you, I'm looking at this one, and honestly, I wouldn’t want to change the details, as it seems like a rather complicated and responsible task. But I'm really happy for you. Have a good one!
@@electricnitrorc By the way, could you just help, I have a hsp backwash at the moment and at idle last time the mixture was too rich. It's still in the run-in phase and I don't want to change the settings, but wanted to lean the mixture a bit since it's stalling and the temp seems low. I am told to deplete the idle needle a bit. But there is a video on youtube with the same model where the person shows too rich mixture at idle and too lean by twisting the low rpm needle. Sorry if the translator didn't translate well. I'm not very good at English.
@reaklyf3451 First make sure your idle gap is set correctly. I would try to lean the LSN at first 1/8 at the time. I wouldn't lean more than max 1/2 turn during break in. If that's not enough to keep the car from stalling I would use the idle needle. Hope that helps 🙏
@@electricnitrorc I think is +- correctly, because the first time I started it, the mixture seemed good and rich. After two weeks at idle you can hear the sound of the mixture being too rich, it is literally about to stall. that is, it’s a matter of weather, as I understand it. Anyway thank you, I'll try exactly what you said.
Just something about that sound that just makes a nitro awesome. Great run 👍
Thank you 🙂 I really enjoy nitros. It's something special about them 👍
Nice! I miss the fun of nitro sometimes but not the mess and headache! Happy to watch you run it around though!
Thanks for comment Addam 🙂 I enjoy both nitro and electric. If I'm being honest I would say both nitro and electric causing severe headache occasionally 😂 but almost always because I stressed and missed something obvious 🙂
Nice to see nitro is still around I’m sick of all these damn crawler channels and electric only channels
Thank you very much for the kind words. Really appreciate it 🙂👍 yes there is enormous amount of electric and crawler channel's 😂
cool nitro and awesome bash
Thank you Duke 👌
Oj!oj!oj! Häftig bil, har du byggt den själv?
Nej, det var den jag köpte i Vallda 😊
En bra bil helt enkelt!
Hello! Have you changed parts due to wear and tear? Gears for example? If so, how long did it last?
Hi 👋 I have owned it one year now. So far, I haven't broken anything 🙂 I was a little afraid because others had problems that the spur gear was stripping. But I'm pretty sure that's because the mesh wasn't set correctly. I'm very happy with my Inferno neo 👍
@@electricnitrorc Thank you, I'm looking at this one, and honestly, I wouldn’t want to change the details, as it seems like a rather complicated and responsible task. But I'm really happy for you. Have a good one!
@@electricnitrorc By the way, could you just help, I have a hsp backwash at the moment and at idle last time the mixture was too rich. It's still in the run-in phase and I don't want to change the settings, but wanted to lean the mixture a bit since it's stalling and the temp seems low. I am told to deplete the idle needle a bit. But there is a video on youtube with the same model where the person shows too rich mixture at idle and too lean by twisting the low rpm needle. Sorry if the translator didn't translate well. I'm not very good at English.
@reaklyf3451 First make sure your idle gap is set correctly. I would try to lean the LSN at first 1/8 at the time. I wouldn't lean more than max 1/2 turn during break in. If that's not enough to keep the car from stalling I would use the idle needle. Hope that helps 🙏
@@electricnitrorc I think is +- correctly, because the first time I started it, the mixture seemed good and rich. After two weeks at idle you can hear the sound of the mixture being too rich, it is literally about to stall. that is, it’s a matter of weather, as I understand it. Anyway thank you, I'll try exactly what you said.
Why keep blipin like that lol
I'm not sure what blipin is, but thanks for watching 🙂
@@electricnitrorc yeah I can see that
😘
@@electricnitrorc he means touching the throttle like that
@alteredstate7746 ok 🙂 dont remember exactly but partly because of all stones and tree roots.