I'm 85 kgs and I have the reign e+ from 3 months. On my last ride I squeeze the battery and I make 32 kms and 1280m d+. It's winter and that morning there was around 10/12 °c. In your opinion it's a good range? I was only on second assistance (tour)
Well explained, Sam, thank you! I wish Giant would fix the "Auto" mode problem of the motor not activating when coming out of a turn. My bike is like yours, a 2022 +0. If I don't petal hard after coasting, the motor does not energize. I find that I have to briefly stop petaling and then petal harder to get it to work. That's why I usually ride in the middle mode, so that the motor always comes on.
Thanks for the kind words rider! I’m not sure you have seen my Syncdrive review video im not much of a fan of the automatic mode try and put it in 200 support and the full 85Nm it will ramp up to the full 100% power if you put in the work it’s kinda like automatic mode kinda give it a go and let me know what you think 🤔
Bang up job Sam! Thanks for this, I have 22 Reign e+2 and was wondering how this all worked. Super cool being able to tone down motor output for days I am not climbing 3K. Did 15 miles yesterday on flatish and used 18% at 50 NM.
Greetings from Norway😊 I have a Fathom E+ 2 29 inch wheels. Bought it thiw year in April i think it was. Since my previous e bike got stolen last year in November in the garage here where i live. That was a e bike from the brand Cube. Reaction Hybrid Performance 500. I wasn't that sad that it happened. Little happy since was two things i didn't like about the bike. The plastic quality of the cover to protect the battery, and the cover to charge with the charger. With this from Giant it's a much better cover where to charge. It fits perfectly and nothing can come inside. And how to use some muscle to open it when to charge. I have the Ridecontrol app on my phone, and came a new firmware update to my bike 2 days ago, and again yesterday. Not sure if it was the same update that updated two days ago. After connect the app to the bike with bluetooth, it showed a update like it showed two days ago also. And updated it. But a strange thing after updated yesterday. When checked the bike of errors in the system check, it showed red in Energypak battery. Never showed that before every time used the system check. But did yesterday. In the e bike setup under bike details it showed that the battery is 100%. So hope this is just some issue with the newest update, and not to the battery itself. I am taking a ride today and hope it works. If someone else experiencing the same issue/problem, i would like to know.
Good video 😉 I have a Giant Stance 2 and the old app sucked! Even though I was connected and I could do a tune, every time I tried to look up how many kms the engine has done it would just hang. Hopefully this update will fix this.
Hey Sam. I'm still a little hazy on what support does. If I am lowering torque for eco and tour should I also lower support to extent range, or is it more to make you work harder for a better work out?
Perfect review and explanations. Exactly what I was looking for. You earned a sub, thanks for the great video! Can't wait to pickup my new bike next week!
I have a similar bike to the one in your video. When you turn the bike on a blue light is displayed - what mode is that? Why does Giant not provide a user manual for how to use the motor settings and what they are. Great video by the way.
Great presentation! Sam, I downloaded the app yet in the “SyncDrive motor tuning page”, I do not see the same newly added settings as you show in the presentation. I am referring to “Support, Torque & Launch”. software I have is version 1.18 . Where can we find the version : 2.0?
@@SamsBikes I have version 1.21 after deleting and updating the app today (10/20/24) Where can I find this 2.0 app?? Are you sure you don't mean App version 1.2? If I look at the version history in the app store, 1.21 is most recent (launched 1 month ago)
Hi Sam, thanks for the videos. I would like some more information on the range extender fir a reign e+2. Are they any good? Are they easy to take on and off?
Hey Nick thanks for the kind words. I’ve actually got one for my Trance but never used it because I have a 800wh but it looks pretty easy to instal and it’s 250wh so give you a decent add to your range
@@SamsBikes thanks Sam, I've done a bit of research and it seems the cable is too short for my bike (giant reign e+2). I'm not sure if they have rectified it yet... or are going to rectify it
Is it true that the TORQUE setting is only available with the SyncDrive PRO2 motor and not with the SyncDrive Sport2 motor? Such a intentional software limitation would be really annoying ...
Awesome bro great content. I’d love the next update to include the ability to save custom tuning setups to a specific trail and name them so they can be easily accessed next time
Hey mate thanks for the kind words! I 💯 agree with you and I’m pretty sure we will see that in the future! I would also love to be able to share my set up with friends.
Dear Sam very interesting video ! I'd like to install the New RideControl App, but in Google Play I can find only old version 1.18 and not your 2.0. Could you help me ? New added settings are very interesting ! Thank in advance for your support 🙂
Question for you as I can't find anything on it myself. Do you know if the app will work with a 2018 Giant Dirt E ... Do I need to update my bike maybe ?
@@SamsBikes Well, on the injured list. Achilles rupture. I have been approved to start some road riding. Been taking the Trance out here in Arizona. Ebike has been an excellent rehab bike. And the new app lets me adjust power even more now. Can't wait to try in the dirt.
Hi Sam, I like your videos for how well explained they are. Could you say something about a bug that appears in the lights of the giant kingdom e + 2022? When I am going up in mode 4, suddenly led 4 starts blinking in orange and goes down to mode 2, losing power. thank you so much
Thanks for your great videos! The City I live is near mountain so when I go to the south side it's all down hill and when I go to the north is all uphill , the only Giant ebike availabe here is Giant Talon E+2 2023 with Yamaha Syncdrive Core with 50Nm torque. Can I ride the hills easily with this ebike like its flat or no?
You can easily climb steep hills at 50nm. I have the new Trance Advanced E Elite + and I ride at 20nm and 30 nm most of the time. I weigh 230lbs with gear.
Hey rider that for the comment! I don’t really understand what you mean? Maybe 🤔 your talking suspension maybe check this video out it might help. ruclips.net/video/eUe19oAbuK8/видео.html and also great to hear you live Quad Lock they are the best
Hi Sam have recently got a Reign E2 and been trying the Ride tracking on the app but have noticed it drops the Bluetooth connection with the bike and needs reconnection or it misses recording the ride? Cheers
Hey Paul I hope all is well mate! I haven’t had that. Maybe try deleting the app and reinstalling then do a full ebike update check everything is up to date and give it another go. Let me know how you get on.
You know how to maintain the app connected to the bike, even with the phone screen turned off? Because if you reconnect the bike in the middle of the ride, you lost all the data previously recorded
In the displays of a ride history, I am unclear as to the meaning of the values under " Average Power" and " "Max Power" . Do these refer to the watts I put out for the ride or the motor puts out or a measure of combined power of me and the hamsters?😊
Hi! How to remove servising message on my Explore e+2 GTS, the last time I reset myself last 2000km, but I don't remember through which program, through RideControl somehow it doesn't work.
Help! Can someone tell me if it is possible to go back to Home Screen mid ride? Today I came to my first big climb of the day and realized I had forgotten to raise my power level back up a little as I had previously tuned it all the way down in eco and tour just playing around. I could figure out how to get to Home Screen without ending the ride. Anyone know how to return to home on the ride control app because Giant doesn’t seem to have much info on their website. Thanks!
Hey mate I just checked what your talking about and your right you can’t go back once your recording. I’ll send a email to Giant and see if there is a work around
@@SamsBikes Thank you so much! It’s uncommon for a you tuber to respond due to volume of comments so I really appreciate your efforts. Also just an FYI I absolutely love the trance e elite 2. At 66 with multiple leg injuries it enables me to ride areas I never would be able to otherwise. Just not enough leg strength left to get up those steep climbs. You still have to pick good lines and use your skills (switchbacks, roots and rocks). People who have never tried one don’t know what they are missing. Thanks for all your work on this channel!
I don't have Launch and Torque fields in my app when connected to my 2021 Trance X E+ 1--just support. Are those specific to this model/year? It says everything is updated
Don't update your giant bike, it'll kill the battery power, it'll slow it down your speed by 30%, I did, biggest mistake I ever made, took it to the dealer, they couldn't help.
Riders I hope you like this video and as always if you have any questions please just ask.
At around 3 minutes, you opened something, but I do not understand what it was.
I'm 85 kgs and I have the reign e+ from 3 months. On my last ride I squeeze the battery and I make 32 kms and 1280m d+. It's winter and that morning there was around 10/12 °c. In your opinion it's a good range? I was only on second assistance (tour)
Which battery do you have?
@@SamsBikes 625 wh
Appreciate the added settings, especially the launch control. Now all they need is motor over-run adjustment 🙂
Yes mate it’s a game changer for Giant and yes I would like to set me over run as well
Well explained, Sam, thank you! I wish Giant would fix the "Auto" mode problem of the motor not activating when coming out of a turn. My bike is like yours, a 2022 +0. If I don't petal hard after coasting, the motor does not energize. I find that I have to briefly stop petaling and then petal harder to get it to work. That's why I usually ride in the middle mode, so that the motor always comes on.
Thanks for the kind words rider! I’m not sure you have seen my Syncdrive review video im not much of a fan of the automatic mode try and put it in 200 support and the full 85Nm it will ramp up to the full 100% power if you put in the work it’s kinda like automatic mode kinda give it a go and let me know what you think 🤔
Bang up job Sam! Thanks for this, I have 22 Reign e+2 and was wondering how this all worked. Super cool being able to tone down motor output for days I am not climbing 3K. Did 15 miles yesterday on flatish and used 18% at 50 NM.
Thanks Kevin for the kind words and yes it’s epic you can totally tune your ebike now!
Greetings from Norway😊
I have a Fathom E+ 2 29 inch wheels. Bought it thiw year in April i think it was. Since my previous e bike got stolen last year in November in the garage here where i live.
That was a e bike from the brand Cube. Reaction Hybrid Performance 500. I wasn't that sad that it happened. Little happy since was two things i didn't like about the bike. The plastic quality of the cover to protect the battery, and the cover to charge with the charger.
With this from Giant it's a much better cover where to charge. It fits perfectly and nothing can come inside. And how to use some muscle to open it when to charge.
I have the Ridecontrol app on my phone, and came a new firmware update to my bike 2 days ago, and again yesterday. Not sure if it was the same update that updated two days ago.
After connect the app to the bike with bluetooth, it showed a update like it showed two days ago also. And updated it. But a strange thing after updated yesterday. When checked the bike of errors in the system check, it showed red in Energypak battery.
Never showed that before every time used the system check. But did yesterday. In the e bike setup under bike details it showed that the battery is 100%. So hope this is just some issue with the newest update, and not to the battery itself. I am taking a ride today and hope it works.
If someone else experiencing the same issue/problem, i would like to know.
Good video 😉 I have a Giant Stance 2 and the old app sucked! Even though I was connected and I could do a tune, every time I tried to look up how many kms the engine has done it would just hang. Hopefully this update will fix this.
Thanks for the kind words mate! Update your app and give it a go and let me known
Hey Sam. I'm still a little hazy on what support does. If I am lowering torque for eco and tour should I also lower support to extent range, or is it more to make you work harder for a better work out?
Perfect review and explanations. Exactly what I was looking for. You earned a sub, thanks for the great video! Can't wait to pickup my new bike next week!
Thanks 🙏 rider
I have a similar bike to the one in your video. When you turn the bike on a blue light is displayed - what mode is that? Why does Giant not provide a user manual for how to use the motor settings and what they are. Great video by the way.
Thanks Sam great advice and explanation.
Hi from Central Coast😁
Not a problem mate enjoy it
Ps I also got the quad lock .
I use ultimate add ons for motorcycle but the quad lock is the only one for mtb no bs cheers.
Great presentation! Sam, I downloaded the app yet in the “SyncDrive motor tuning page”, I do not see the same newly added settings as you show in the presentation. I am referring to “Support, Torque & Launch”. software I have is version 1.18 . Where can we find the version : 2.0?
Thanks rider! Delete the app and download it again of the App Store and that should work
@@SamsBikes I have version 1.21 after deleting and updating the app today (10/20/24) Where can I find this 2.0 app?? Are you sure you don't mean App version 1.2? If I look at the version history in the app store, 1.21 is most recent (launched 1 month ago)
Thank you for introducing our app, hope you like it.😊
Not a problem I love the new ride control app massive step up
Hi Sam, thanks for the videos. I would like some more information on the range extender fir a reign e+2. Are they any good? Are they easy to take on and off?
Hey Nick thanks for the kind words. I’ve actually got one for my Trance but never used it because I have a 800wh but it looks pretty easy to instal and it’s 250wh so give you a decent add to your range
@@SamsBikes thanks Sam, I've done a bit of research and it seems the cable is too short for my bike (giant reign e+2). I'm not sure if they have rectified it yet... or are going to rectify it
Is it true that the TORQUE setting is only available with the SyncDrive PRO2 motor and not with the SyncDrive Sport2 motor? Such a intentional software limitation would be really annoying ...
Not sure let me try and find out
Great content! It really helps to get an idea of what can be done to modify the ride.
Thanks mate glad you liked it
Awesome bro great content. I’d love the next update to include the ability to save custom tuning setups to a specific trail and name them so they can be easily accessed next time
Hey mate thanks for the kind words! I 💯 agree with you and I’m pretty sure we will see that in the future! I would also love to be able to share my set up with friends.
Dear Sam very interesting video ! I'd like to install the New RideControl App, but in Google Play I can find only old version 1.18 and not your 2.0. Could you help me ? New added settings are very interesting ! Thank in advance for your support 🙂
That's a instant subscribe. Great update!
Thanks mate
Question for you as I can't find anything on it myself. Do you know if the app will work with a 2018 Giant Dirt E ... Do I need to update my bike maybe ?
I’m not really sure mate maybe just try and go to your local giant dealer and see if you can help.
After updated my controler from app, all lights Off and nothing works anymore? What I have to do.. how i reset it withow Bluetooth connection?
22 Trance X ADV E+2, this app truly brings the Sync-drive Pro to a new level.
Totally Tim glad your loving it!
@@SamsBikes
Well, on the injured list. Achilles rupture. I have been approved to start some road riding. Been taking the Trance out here in Arizona. Ebike has been an excellent rehab bike. And the new app lets me adjust power even more now. Can't wait to try in the dirt.
Hi Sam, I like your videos for how well explained they are. Could you say something about a bug that appears in the lights of the giant kingdom e + 2022? When I am going up in mode 4, suddenly led 4 starts blinking in orange and goes down to mode 2, losing power. thank you so much
Thanks for your great videos! The City I live is near mountain so when I go to the south side it's all down hill and when I go to the north is all uphill , the only Giant ebike availabe here is Giant Talon E+2 2023 with Yamaha Syncdrive Core with 50Nm torque. Can I ride the hills easily with this ebike like its flat or no?
You can easily climb steep hills at 50nm. I have the new Trance Advanced E Elite + and I ride at 20nm and 30 nm most of the time. I weigh 230lbs with gear.
Would be a great app if you could actually turn off the restriction
Haha nice idea but thar will never happen
I got the reign 2022 I love it
Can you smooth it out ..less on /off ?
Hey rider that for the comment! I don’t really understand what you mean? Maybe 🤔 your talking suspension maybe check this video out it might help. ruclips.net/video/eUe19oAbuK8/видео.html and also great to hear you live Quad Lock they are the best
Im really happy with the motor .but it would be interesting to play with the mapping off how the powe feeds in like the powerful rc cars.
@@user-nn4wj8gk9s Reduce "Launch"?
Have to have a play !!
Hi Sam have recently got a Reign E2 and been trying the Ride tracking on the app but have noticed it drops the Bluetooth connection with the bike and needs reconnection or it misses recording the ride?
Cheers
Hey Paul I hope all is well mate! I haven’t had that. Maybe try deleting the app and reinstalling then do a full ebike update check everything is up to date and give it another go. Let me know how you get on.
You know how to maintain the app connected to the bike, even with the phone screen turned off? Because if you reconnect the bike in the middle of the ride, you lost all the data previously recorded
In the displays of a ride history, I am unclear as to the meaning of the values under " Average Power" and " "Max Power" . Do these refer to the watts I put out for the ride or the motor puts out or a measure of combined power of me and the hamsters?😊
Will this work on a yamaha moro 07?
Hi! How to remove servising message on my Explore e+2 GTS, the last time I reset myself last 2000km, but I don't remember through which program, through RideControl somehow it doesn't work.
Uodated the app and still.cannot acces the page where you tune the engine and the bike details. 2020 Trance e+. Thanks!
Help! Can someone tell me if it is possible to go back to Home Screen mid ride? Today I came to my first big climb of the day and realized I had forgotten to raise my power level back up a little as I had previously tuned it all the way down in eco and tour just playing around. I could figure out how to get to Home Screen without ending the ride. Anyone know how to return to home on the ride control app because Giant doesn’t seem to have much info on their website. Thanks!
Hey mate I just checked what your talking about and your right you can’t go back once your recording. I’ll send a email to Giant and see if there is a work around
@@SamsBikes Thank you so much! It’s uncommon for a you tuber to respond due to volume of comments so I really appreciate your efforts. Also just an FYI I absolutely love the trance e elite 2. At 66 with multiple leg injuries it enables me to ride areas I never would be able to otherwise. Just not enough leg strength left to get up those steep climbs. You still have to pick good lines and use your skills (switchbacks, roots and rocks). People who have never tried one don’t know what they are missing. Thanks for all your work on this channel!
No cruise control?
Great Video AAAAA+++++
Thanks Rider!
I don't have Launch and Torque fields in my app when connected to my 2021 Trance X E+ 1--just support. Are those specific to this model/year? It says everything is updated
Really try and update the app again
It's great when it's working but now the display settings don't work and also keeps disconnecting..
How do i change the mph to kph on the speedometer of the app?
I've got a 2022 Giant Reign E+0, it's excellent and the app is great too.
I’m really happy to hear that mate! The Reign E+0 is a beast of a ebike!
thanks
No problem
how can i see how many miles my bike has done?
Go to e-bike parameters, and then to Bike details. You will see the miles done in General description
Any new updates?
Don't update your giant bike, it'll kill the battery power, it'll slow it down your speed by 30%, I did, biggest mistake I ever made, took it to the dealer, they couldn't help.
Can anyone else confirm or deny this. I’m wanting to update my ride control app.