XL6009, LM2596 Boost Converter Module Testing with 12 volt 555 dc motor in hindi.
HTML-код
- Опубликовано: 11 сен 2024
- HI FRIENDS
WELCOME TO MY RUclips CHANNEL UNLIKE IDEAS (RAJ TECH)
ABOUT THESE VIDEOS -: XL6009, LM2596 Dc to Dc stepup boost converter module with 12 volt DC motor.
○ Adjustable output voltage range from 1.25V to 37V continuously adjustable with voltmeter display, voltmeter error ± 0.1V, range 0 ~ 45V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage is above 4V)
○ Touch the button to switch the measurement input or output voltage, and there is an indicator to indicate which voltage is being measured, and keep the last setting, even if it is powered off and then on.
○ With terminal block, it can be easily used without soldering, and the wire bond point is retained.
■ Doston Video Achha Laga To 👍Like Kare Shere Kare Aur Hamare Channel Ko SUBSCRIBE Karke Support Kijiya.
■ Material Required -:
1.12 volt DC Motor.
2. XL6009 DC to DC Boost Converter Module.
3. 3.7 volt Rechargeable Li-ion Battery.
4. Li-ion Battery Holder.
5. Wires.
6. Crocodile Clip.
■ RUclips
/ unlikeideas
■ FACEBOOK
/ unlikeideas
■ MY VIDEO LINKS -:
1. Replace bluetooth speaker battery.
• Replace your bluetooth...
2. How to make mini Bluetooth speaker.
• How to make Bluetooth ...
3. How to open digital multimeter hindi.
• How to open digital mu...
4. Car parking sensor using arduino.
• Arduino parking sensor...
5. 16 Led Chaser With Controller.
• How to make 16 led cha...
■ Background Music Credit -:
Niviro - Flares ( NCS Release )
• NIVIRO - Flares | Hous...
#dcboostconvertermodule
#dcboostconvertercircuit
#eletricproject
#lm2596dctodcboostconverter
#lm2596dctodcstepupmodule
#lm2596dctodcvoltageregulatar
#xl6009moduleunboxing
#boostconverter
#xl6009
#lm2577
#lm2596
#mt3608
Bahut bahut dhanyawad Bhai 🙏🏻
Thanks bro
beautiful video thanks 👍
Thanks bro for support
kia hum isay as a step down use karsaktay hain?
Yes bro use it
Can we run pam8610 12v amplifier with this?
Yes bro use it
Bhaiya is there any way to limit current in 4v led strips.???
Used module potansiometer
Sar 12 ka amplifier kitne time tak chal paye ga ye module garm to nahi tota hai
No heating problem use it
Very nice 👌👍👌👍
Is battery se is motor ko kitne der tak chala ja sakta jyada der chalne per DC booster kharab to nahin hoga
No bro
Is it a good step up module? Is it worth to buy??
Iska use aap bahut Sare project Mein kar sakte hain ise buy karna bekar Nahin jaega
@@UNLIKEIDEAS Bhai ye use karne ke time heat nhi hota na
Sir I order this module I use 9 volt battery but uske sath jab maine 12 volt motor ko chalne ki kosis ki to wo nhi chll rahi ..or jbb mai motor ko is ke sath connect krta tha tabh moduel ku light v off ho jati hai kya reason ho sakta hai ?..ya fir battery badhi use kru? (550 divanshi dc motor hai sir usko use krne k liye kitne ka input dena caheye)
Use 12v battery or 12v dc adapter
Is main koi hitting issue nahi hain, long time use kar sakte hain kya is booster se?
Yes bro
Bhai ye kitne ka h aur online mil jayega kya
Yes bro search online any electronic website or amazon / local market electronics shop
When I am doing 12 volt input and set 3 volt on output but digital display is showing 5 volt ie whatever voltage I set it increases by 2 volt but checking with meter output voltage meter But it is showing correct only on digital display two volt is getting high how to solve the problem
Hi
Because the voltage meter installed in it operates on 5 volts. That is why if it goes below 5 volts the display will cut off.
Es pe load kam jiyda hone se kia volt stable rahega? Max amp? Run subwoofer?
No bro
Use proper input voltage
Hey how accurate the meter in that is? Pls i want to buy it sir
100% working good module
Hey bro merepass xl6009 hai merko 12v-1.5amp ka output chaiye kitna ka input dalu batao
Use 5v or 12v
جب میں 12 وولٹ ان کر رہا ہوں اور اؤٹ پٹ پر تین وولٹ سیٹ کرتا ہوں لیکن ڈیجیٹل ڈسپلے پر پانچ وولٹ شو ہو رہا ہے یعنی میں جو بھی وولٹیج سیٹ کرتا ہوں دو وولٹ بڑھ جاتے ہیں لیکن میٹر سے چیک کرنے پر اؤٹ پٹ وولٹیج میٹر پر صحیح شو کر رہا ہے صرف ڈیجیٹل ڈسپلے پر دو وولٹ زیادہ ا رہے ہیں مسئلہ کیسے حل ہوگا
🎉
Thanks bro
i am using 5v and 2A Mob charger and powering the circuit but when I go near 12v with the fan as a load the circuit gets dim any solution for that?
Use low amper motor
What is the volatage and amps of your battery?
3.7 v 3000mAH 2A
Ye kitne dair me heat ho jaata hai
No heating problem
Sir j offline market se kaha se milata hai ?
Local market electronics shop
@@UNLIKEIDEAS okkk sir👍
mera ic over heat hota hea
Use heat Sink Plate
Bhai volt mitar regulatar ko ghumane se kam nahi karta kaya kare
Change it to normal voltage regulator
Me lene vala hu mere pass 12 volt ka fan hai 😅
👍
Input 3.7v 10A output 24v 1.5A can i get ?
Yes bro use it
Hey bro i have the circuit but I am powering from a mobile charger 5v 2A when I connect my fan 12v 0.16A and increase the voltage to 10v or above the circuit gets dim and the fan spins slowly any solution?
This module increases voltage not Ams
@@UNLIKEIDEAS i know but when I am using mobile charger and then increasing it to 12v and powering my fan the circuit gets dim
@@cacti5740 did you get any solution?
Kitna amp ka ha?
Which one battery, boost converter or dc motor
Is ka output ampr Kitna ha
Depending on battery ampr
Ok
Can it be used to make a laptop power bank?
Yes
how to run voltage booster with input of 1.5 volt
Minimum input voltage 3v required
thank you for this but acctually i want to run voltage booster with small dc motor so ho can i increase volt of motor to 3 volt so i can run voltage booster
You can use
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Boost Converter Step-Up Module
@@UNLIKEIDEAS i am very thankful that you are solving My problem you can please send the link of module that take 1.5 volt input from amazon.
www.amazon.in/dp/B08W2C18ZH/ref=cm_sw_r_cp_apa_glt_fabc_HFNQK7YZF3NSXG8AB3JS
Module kharab nhi hota kiya chalene se moter
No
Does it require heat sink?
No
Price kay hi
450/- module
Bro 6009 without display module me anti clockwise ghumane se voltage increase ho raha hai par motor ka speed ku nahi bar raha? Please solve this and tell me 🙏
Aap is module ka use Karke battery ka voltage Badha sakte ho lekin ampere Nahin Badha sakte ho isiliye aapka voltage badhane se motor run ho raha hai lekin ampere kam hone ke vajah se motor ka speed Nahin increase ho raha hai
Thanks
Par aapka motor kaise ghum rha hai??
@@sdmhacks1381 use high ampere battery
Thanks 👍 bro keep it up!
Bhaii me ise agar dc fan ke liye loo to kaisa work karega
Good DC-DC Step-up Boost Converter use this
Heat to nhi hoga ye
@@Shivamyadav77507 no
Display AUR Bina Display vale me kya antar hota h
Jab 12 volt motor connect tha tab kyu 60volt cross nahi hua??
Kyunki Main Yahan per 3.7 volt battery ka use kiya hai agar aap Yahan per 12 volt ka use Karenge to Aap Yahan per ise Kitna bhi increase Karoge To aapka voltage Kam Nahin Hoga 3.7 V battery ka voltage bahut kam hota hai use Kitna bhi increase Karoge To maximum 50v ya fir 55v Tak hoyega
@@UNLIKEIDEAS input power supply per mobile charger use kar skta hu kya? Agr 4v battery nahi use Karu to
@@Loser989-b5v yes you can use input supply 5v with mobile Charger
Module will over heat and damage
Why
Heat ho rha h
10 minute continue shuru rakhne se Module Damage ho gaya
Input voltage how much you apply
Sir can you please run 1 small DC motor using another small DC motor using voltage booster
Coming soon
Bhai 775 kitni der chala sakta
1hr
Can be used 3v phone charger input
Yes bro ph charging input voltage 5v not 3v
@@UNLIKEIDEAS bro old keypad phone charger output 3v Or 5v
@@dhanapallayya254 5v
@@UNLIKEIDEAS ok it's run or not
@@dhanapallayya254 yes it's run
Input ac means output ac plz
Dc voltage required not ac current
@@UNLIKEIDEAS Hw battery use xl6009 it's can't working while connecting hw battery plz tell reason
@@ganavathyshakti9828 it's working li ion or 18650 battery
@@UNLIKEIDEAS thanks for your reply
Price please
399
Sir two module ko series mein connect kar sakta hain for more power ke liye
No
Kitne ampare ka motor he ?
12v 2A
@@UNLIKEIDEAS thanks , kya he module me heat sink lagana parega ?
@@bubundhar aapki Marji aap Laga bhi sakte ho Nahin bhi Laga sakte ho
@@UNLIKEIDEAS thanks . Achha kya isme battery protection he . Matlab kya ise use karte samay battery ko charge diya ja sakta he ?
@@bubundhar Battery protection means aapka Jo battery Hai full charge hone ke bad ya automatic cut out ho jaega or aap motor ko Run karte samay bhi ise charge per Laga sakte hain Koi dikkat wali baat nahin hai
Ye kitna samoy tak chalega 🤔🤔
Depending on battery power