we used one of these machines inside a 3 million square feet building This machine is wonderful when u can’t use fans and offices are nearby and doing renovations. You can’t use diesels or even LP vehicles inside most buildings now
I think everyone is missing the point of this machine. It is meant for congested or highly sensitive areas where emissions aren’t allowed such as inside furnaces, refractory areas etc. we have used this type of unit for years tearing out glass units etc where a big unit won’t fit and it’s all inclosed so emissions are a no no. To some it may look expensive or not needed but specialty companies rely on this type of equipment to not only get projects but to keep their crews safe as well
This is really smart it’s small enough to get inside a building so like what if they got to move something extremely heavy inside a building and need a machine. This will work great no emissions when inside the building and small enough to go through a door. I think they should of made it where you can just hook it up with the generator attached to the machine for better mobility
No, we get it - but that is such a dumb way to go about it, that I am seriously embarrassed for CAT as a company. ( I mean, a fucking exhaust hose run out the door would cost 1/10,000th the time, effort, and money!) And most of the time a few guys with sledge hammers could get it!
@@goldrushpro Why are you triggered by this? If you dont like it, dont buy it. Cat saw a need, and builds a machine to fill that need. Stick to your sledge if that floats your boat, but to others, time is money. To each their own.....
I get they are going for the zero emissions feature which would be real nice INSIDE a factory where a thick floor needs to be hammered out. Why didn't they install the electric motor ON the Mini Ex? Use the on board hydraulics, just clutch the drive systems together. Just run 220V via the same cable used for the VPS but to the Mini Ex. I agree with Doug Moore, setup seems a bit timely with many parts to get lost on a job site. You would have a true "hybrid" if the Electric motor was built in. Just my 2 cents.
Clever. I like how they multi purpose. The lifting bar becomes the hose guide. Providing power to the HPU is really the only negative I can think of. All those other reasons the geniuses down below me is because they will try to nay say it just to try and make themselves sound like they know what the hell they're talking about. This is a great idea well executed.
Its the HPU300. I believe its a mobile Hydraulic pressure booster for axillary attachments like the jackhammer tool. basically the mini-ex doesn't have the necessary hydraulic flow and pressure to operate the hammer alone, so the HPU300 does that for it when hooked up.
The HPU supplies all the hydraulic power to the mini-ex, not just for the work tools. The idea is that you dont have to have any engines running indoors to power the machine, just 3-phase 480VAC, which can be supplied by a generator outside, or just a wall outlet if the building is equipped with it.
Remote location only. The Premises is working with zero emissions inside, while I believe a gen set as small as 10k can supply the 3 phase. Niche market idea, but one that could have big impact on remediation or demolition near sensitive areas.
Matt Seymour nope the HPU is an electrically-powered hydraulic pump but needs external 3 phase power. Just means the excavator can be operated without a combustion engine and fumes.
The 300.9D VPS with HPU300 features Dual Mode Selection for a choice of diesel or electric power. This innovative machine delivers zero emissions from electrical supply, low noise, superior power and control. Easily change from diesel to electric power. To learn more about the 300.9D VPS with HPU300 visit our website: bit.ly/2Rw4flT
It really needs a better hose management system- as shown, those hoses will be all twisted up as soon as the machine moves away from the power supply. And, FWIW, I believe Takeuchi has come out with a battery powered mini.
Hi! HPU stands for Hydraulic Power Unit - which is an electrically driven pump with separate hydraulic tank. The HPU requires a 3 phase, 480 V power supply which can be either from a wall mounted socket on site or from a portable generator. When the HPU is utilized, the 300.9D VPS machine can be operated without the diesel engine running, thus providing a clean and quite indoor solution.
How can you even use it if they don’t give you the 480v power cord to turn it on I sure bet everybody just has one lying around and they supply the adapter but not the cord wtf
Hi William! The 300.9D VPS & HPU300 Hydraulics comes with HPU300 Connecting Hose Length of 32.8 ft. To learn more about this machine please visit our website: bit.ly/2D9Mof0
Hi Jacob! HPU stands for Hydraulic Power Unit - which is an electrically driven pump with separate hydraulic tank. The HPU requires a 3 phase, 480 V power supply which can be either from a wall mounted socket on site or from a portable generator. When the HPU is utilized, the 300.9D VPS machine can be operated without the diesel engine running, thus providing a clean and quite indoor solution.
It fits well (depending on whose eye looks it..) to work inside a factory, but I think this set up would fit better for civil purposes.. by the way, factories usually have bigger doors to allow bigger machines, and houses don't have the 380V plant...
Hello vishwas. The Cat 300.9D VPS & HPU300 Mini Hydraulic Excavator has a dual mode selection: Diesel or electric powered. Thank you for your question! - Rachel
Hi Ahana! Thank you for your interest! Your Cat dealer can help you with pricing and availability. You can find your local dealer on our website here: bit.ly/2TtkgMx - Maria C
I'd think to have the electric motor mounted on the machine itself. Then all you'd have to do is shut off the diesel engine and plug in the machine to power....
1.5 ton machine that requires an external power source (not included), or 80lb jackhammer with a compressor you can leave outside. And rent for faaaaaaar cheaper. Good luck selling your toy.
Terima kasih atas minat Anda! Dealer Cat Anda dapat membantu Anda dengan harga dan ketersediaan. Anda dapat menemukan dealer lokal di situs web kami: bit.ly/2IjM7sg.
¡Gracias por su interés! Su distribuidor Cat local puede ayudarlo con precios y disponibilidad. Visite: bit.ly/2lxOjSf para encontrar a su distribuidor en nuestro sitio web.
Seriously obvious this was designed by engineers that have never been on an actual jobsite. Lots of kibbles and bits to be lost in mud, fiddly fittings to be caked up by a little bit of grit. Bare metalic bits to ensure hands are so numb they won't be much good for anything after cursing and swearing looking for and wrestling with the machine because of the aforementioned things.
Gracias por su interes! Su distribuidor Cat puede ayudar con precios y desponibilidad. Puede encontrar su distribuidor local en nuestro sitio web: www.cat.com/es_MX/support/dealer-locator.html
we used one of these machines inside a 3 million square feet building
This machine is wonderful when u can’t use fans and offices are nearby and doing renovations. You can’t use diesels or even LP vehicles inside most buildings now
Rather use a Brokk
I think everyone is missing the point of this machine. It is meant for congested or highly sensitive areas where emissions aren’t allowed such as inside furnaces, refractory areas etc. we have used this type of unit for years tearing out glass units etc where a big unit won’t fit and it’s all inclosed so emissions are a no no. To some it may look expensive or not needed but specialty companies rely on this type of equipment to not only get projects but to keep their crews safe as well
Careful you're insulting peoples lack of common sense. In a few years the PC police will be after you. Lmao
I just ordered one, should have it in 3 weeks. Can't wait...
This is really smart it’s small enough to get inside a building so like what if they got to move something extremely heavy inside a building and need a machine. This will work great no emissions when inside the building and small enough to go through a door. I think they should of made it where you can just hook it up with the generator attached to the machine for better mobility
No, we get it - but that is such a dumb way to go about it, that I am seriously embarrassed for CAT as a company. ( I mean, a fucking exhaust hose run out the door would cost 1/10,000th the time, effort, and money!)
And most of the time a few guys with sledge hammers could get it!
@@goldrushpro Why are you triggered by this? If you dont like it, dont buy it. Cat saw a need, and builds a machine to fill that need. Stick to your sledge if that floats your boat, but to others, time is money. To each their own.....
I get they are going for the zero emissions feature which would be real nice INSIDE a factory where a thick floor needs to be hammered out. Why didn't they install the electric motor ON the Mini Ex? Use the on board hydraulics, just clutch the drive systems together. Just run 220V via the same cable used for the VPS but to the Mini Ex.
I agree with Doug Moore, setup seems a bit timely with many parts to get lost on a job site. You would have a true "hybrid" if the Electric motor was built in. Just my 2 cents.
oh yeah let me just plug it into that 3 phase, 480 volt wall outlet over there
Dfggh
Love how hes unloading it without his ROPS up yet puts it up once inside hahaha. Good greif.
Totally no idea what am i doing here in the middle of the night. But definitely gonna get this toy someday
Special tool requirements, pins,hoses,different fuels and different power plants what a great combination for success lol 😂
*goes through narrow doorway*
*looks to right of screen and sees massive garage door*
Clever. I like how they multi purpose. The lifting bar becomes the hose guide. Providing power to the HPU is really the only negative I can think of. All those other reasons the geniuses down below me is because they will try to nay say it just to try and make themselves sound like they know what the hell they're talking about. This is a great idea well executed.
Doesn't JCB have a full electric excavator in this class with an on-board battery? Perhaps it's too big to fit through doors.
I think it's a 1.5 ton
I thought CAT was discontinuing this model? Why upsell it now?
Hi! The 300.9D is a key model and provides the right solution in the tightest of spaces. There are no plans to discontinue at this time.
Its the HPU300. I believe its a mobile Hydraulic pressure booster for axillary attachments like the jackhammer tool. basically the mini-ex doesn't have the necessary hydraulic flow and pressure to operate the hammer alone, so the HPU300 does that for it when hooked up.
The HPU supplies all the hydraulic power to the mini-ex, not just for the work tools. The idea is that you dont have to have any engines running indoors to power the machine, just 3-phase 480VAC, which can be supplied by a generator outside, or just a wall outlet if the building is equipped with it.
My Guy ttty7
Lengre er det ikke bygge stømm på tomta?
How many price for this excavator?
Hi Shayon! Your Cat dealer can help you with pricing and availability. You can find your local dealer on our website: bit.ly/2PWawaX.
Zero emissions, or emissions at a remote location?
Remote location only. The Premises is working with zero emissions inside, while I believe a gen set as small as 10k can supply the 3 phase.
Niche market idea, but one that could have big impact on remediation or demolition near sensitive areas.
It's not an issue when the job site has readily available electricity
i bet thatal cost the same as a normal one
hope he realises that its not going to work without it being plugged in
Ummm... Don't you need to plug it in?
Is this a battery powered excavator?
Matt Seymour nope the HPU is an electrically-powered hydraulic pump but needs external 3 phase power. Just means the excavator can be operated without a combustion engine and fumes.
The 300.9D VPS with HPU300 features Dual Mode Selection for a choice of diesel or electric power. This innovative machine delivers zero emissions from electrical supply, low noise, superior power and control. Easily change from diesel to electric power. To learn more about the 300.9D VPS with HPU300 visit our website: bit.ly/2Rw4flT
It really needs a better hose management system- as shown, those hoses will be all twisted up as soon as the machine moves away from the power supply. And, FWIW, I believe Takeuchi has come out with a battery powered mini.
The music is like pissing into my ears
Some people would pay for that.
Why the music
Good luck finding the outlet to fit.
The socket is provided, not the cord, if you read carefully :P
Yeah that's what I was thinking as well you would never have a 480v panel to connect to in immediate work area
Looks like it's more trouble than its worth. At this size I'd run with a Brokk 150
What ton is it
The Cat 300.9D VPS Mini Excavator is approximately 1 ton (2399 lbs.).
You bring it to the job site in your Volkswagen
You should make an extended/extensible exhaust system with a fume extractor instead to get fumes out of the building.
Jesus- that does sound so much easier and less complicated
Already widely available in Europe.
Would like to see how you get them pipes on when the digger has been buried in mud great idea 🤣
This obviously isnt a machine you take into the mud. Meant for interior demo, and dirt moving.
can someone explain what the HPU is.
Hi! HPU stands for Hydraulic Power Unit - which is an electrically driven pump with separate hydraulic tank. The HPU requires a 3 phase, 480 V power supply which can be either from a wall mounted socket on site or from a portable generator. When the HPU is utilized, the 300.9D VPS machine can be operated without the diesel engine running, thus providing a clean and quite indoor solution.
How can you even use it if they don’t give you the 480v power cord to turn it on I sure bet everybody just has one lying around and they supply the adapter but not the cord wtf
Hi William! The 300.9D VPS & HPU300 Hydraulics comes with HPU300 Connecting Hose Length of 32.8 ft. To learn more about this machine please visit our website: bit.ly/2D9Mof0
HPU. What does that mean
Hi Jacob! HPU stands for Hydraulic Power Unit - which is an electrically driven pump with separate hydraulic tank. The HPU requires a 3 phase, 480 V power supply which can be either from a wall mounted socket on site or from a portable generator. When the HPU is utilized, the 300.9D VPS machine can be operated without the diesel engine running, thus providing a clean and quite indoor solution.
3 ph 480v is pricey to acquire if you don’t already own, only a select few will have.
Auf der bauma stand wacker neuson auf dem typenschild. Also ist keine eigenproduzierte maschine
It fits well (depending on whose eye looks it..) to work inside a factory, but I think this set up would fit better for civil purposes.. by the way, factories usually have bigger doors to allow bigger machines, and houses don't have the 380V plant...
We made an electric excavator but it needs a diesel motor for the hydros to run epic
Engineers in suits.... Work with them everyday and have to chase them out of the office to do site surveys regularly.
Buatan Mat Saleh memang aku cukup kagum
Prototype?
It will be quitting time by the time you get it set up.
Doug Moore M
Doug Moore ÁA
Camilla Lassen n
Doug Moore was azs
Andreas Heilmeier b jjji
Sir hpu means
Hello vishwas. HPU stands for Hydraulic Power Unit. Thank you for your question! - Rachel
Sir it is worked on the basis of diesel engine or electric current
Hello vishwas. The Cat 300.9D VPS & HPU300 Mini Hydraulic Excavator has a dual mode selection: Diesel or electric powered. Thank you for your question! - Rachel
Price
Hi Ahana! Thank you for your interest! Your Cat dealer can help you with pricing and availability. You can find your local dealer on our website here: bit.ly/2TtkgMx - Maria C
How much
If the excavator works fine with diesel why would anyone use this system?
Some sites require no emissions
Yeh plug the digger into a pump plug the pump into a generator plug the generator into the gas ..... 😂
I thought it was a diesel powered remote hydraulic unit for outdoors...but this is good too.
I'd think to have the electric motor mounted on the machine itself. Then all you'd have to do is shut off the diesel engine and plug in the machine to power....
realvanman
i've sure the reason they did it is to keep the machine as compact as possible and modular
I had the same thoughts, make it as a unit behind the seat with a spool that winds the power cable as you back up
realvanman 9.
Because with the electric power unit outside in can be used in hazardous atmospheres, IE inside tanks in the petrochemical industry, etc
Что за установка ? Генератор ? Для чего
Que baita trabalho!!
1.5 ton machine that requires an external power source (not included), or 80lb jackhammer with a compressor you can leave outside. And rent for faaaaaaar cheaper. Good luck selling your toy.
kajidono No doubt it will be sold because I would buy one.. No one wants any jackhammer in this age!
That's what Mexicans are for
otto skorzeny ya man that's y I'm here for
It’s not just for a jackhammer and the external power source is for indoors so your work space doesn’t become contaminated.
@@695noah bobcat makes scrubbers for their machines. Makes the exhaust into water vapor or something. Completely safe to run in doors
You could just go threw the garage door
Ha ha ha ha I think cat wanted to prove it could go through doorways.
Nice
Cat pays millions for engineering and this is what they come up with! your all fired!!
Nice machine super your machine price
yeah...like you'll going to find 480v everywhere in a construction site...
5:30 ?
حلو
cat nr. 1 .
why no mve with electric power? sorry this is to lazy. 5minuts more rekording, 5m conduit, 5min more video edding and the vide would be better
Me setting up for a sick LAN party at my freinds house
I will stick with a demo hammer and a wheelbarrow
I couldn't watch to the end, the music was repellant.
Cat from tiniest small to massively huge
this looks like a kids toy and it is
Good!
lol that thing wouldn't scratch me nuts....
JCB 👍👍👍👍👍👍👍👍👍👍👍
Wacker Neuson 803 HPU !!!!
Indian price
Muito show de bola cat EA a melhor aqui no Brasil éu só opero ele 😎😎
😍
Berapa harga alat nya
Terima kasih atas minat Anda! Dealer Cat Anda dapat membantu Anda dengan harga dan ketersediaan. Anda dapat menemukan dealer lokal di situs web kami: bit.ly/2IjM7sg.
cool
Needs a high back seat
Innovative,,
Would be useful if working indoors and really confined spaces
Is this a joke?
Muito bom 😨😈😎😱😲💪💪💪
Cuánto vale uno así.
¡Gracias por su interés! Su distribuidor Cat local puede ayudarlo con precios y disponibilidad. Visite: bit.ly/2lxOjSf para encontrar a su distribuidor en nuestro sitio web.
♥♥♥♥♥♥♥♥♥
Seriously obvious this was designed by engineers that have never been on an actual jobsite. Lots of kibbles and bits to be lost in mud, fiddly fittings to be caked up by a little bit of grit. Bare metalic bits to ensure hands are so numb they won't be much good for anything after cursing and swearing looking for and wrestling with the machine because of the aforementioned things.
Harganya berapa.?
5:28 ?????????????!!!!!!!!!!!!!!!!!!!!!
similar Wacker Newson :(
Stefano Piraino xğgyut
Stefano Piraino it's made and designed by wacker nueson. Just painted cat yellow
*Wacker Neuson
It’s a Wacker machine with a Cat sticker
กี่บาท
100th LIKE SEND ME A HAT LOL
Harry Hov cerah
Harry Hov h
Cute..
Losing my whole day Just trying to connect it.
🤝🤝🤝👍🏻👍🏻👍🏻👍🏻👍🏻😁😁
Cómo. Puedo conseguir. Una. Máquina así. Caterpillar
Gracias por su interes! Su distribuidor Cat puede ayudar con precios y desponibilidad. Puede encontrar su distribuidor local en nuestro sitio web: www.cat.com/es_MX/support/dealer-locator.html
Why would they do all that, if the machine is too small, so be it. I do not like it at all.
What a headache
Good broo
keren
I see; a hydraulic drive motor. interesting.
도대체 뭔작업할려고 그러는지
안쓴다 귀찮다
zero emissions my azz what is powering it?
Cool and thé electricity is produced by heat engine outside thé building !!😂😂🤣
made in Peoria Illinois
so once it is set up your ready for work the next day
Eduardo
Fuck that I will get the machine in there
I'd rather do the job by hand
Man version of a vacuum cleaner