I don't even have that bike but now I want it ! It is great that these mods exist - created so perfectly for the bike. Too bad Honda doesn't pay them to use these units - installed at the factory. A great, better idea, and superior product like this needs to be rewarded.
holy this tutorial video is beyond step by step lol I will probably just get this headlight cos of this awesome video. watched the whole thing even though I don't have the headlight yet lol
Thanks for the comment, we try to be as thorough as we can in our videos so folks at home can easily perform the install instead of taking it to a shop.
20:47 Had to stop my install tonight to wait for a dremel :/ Where the two outside metal collars go, the plastics don’t reach both sides on my 2024. Going to have to shave down a half inch or less in order to get it to fit it seems.
THAT WAS A GREAT DETAILED INSTRUCTIONAL VIDEO ON HOW TO INSTALL!!! IN THE FUTURE WILL THERE BE AN OPTION FOR THE LED BAR COLOR TO MATCH THE TURN SIGNAL COLOR??? IF SO, WHEN WILL THAT HEADLIGHT MODEL BE RELEASED???
We do not plan to offer that feature. It would cause the light to be not street legal due to the signal spacing requirement. Besides, the bike already has front turn signals on the fairing.
Adding switchbacks will cause the light to be not street legal due to the spacing requirements. This will be a huge factor if we decide to put them through ECE certification in the future.
Great video, I want to buy these lights since I am trying to convert my 08- 2013+ I could see that your bike was also converted. Did you just cut the air intake from your 08. Is it possible to reuse the air filter from 08 or do I need to buy new air intake?
How much power/electricity does these headlight use in comparison to the stock? Power usage difference between stock and these awesome headlights? Thank you
Factory head lights pulls 4.24A for the low beams and 4.24A for the high beams @ 13.8V. Our low beam + DRL pulls 2.84A and high beams pulls 2.62A. This results in 33% less draw for the low beams (+DRL) and 38% less draw for the high beams.
We have considered it but it will cause it to be not street legal due to the spacing requirement. Better to not risk it in the event we put it through ECE certification in the future.
@@motodynamic tru. I hear ya. I would have mine as an edition to the signals already on my bike. Currently I have signals on the mirrors and the side fairings up front as well as two sets in the back
@@motodynamic you got any photo references? Because i want to buy it today whole set but not sure for intelliflash. I check it got 2 wire at signal only.
@@Muslym_7 If you only have 2 wires, then Intelliflash will not be able to plug in because of the difference in connectors. You can modify it to make it work, Intelliflash only requires ground and turn signal+ to make it work.
@@motodynamic Could you elaborate? I'm looking for a dual mod headlight for 15' that is street legal in EU(Poland specifically). Is there any way to "make" them legal?
@@Shauddy The certification process to make them legal is called ECE. It involves testing the head light in a TUV photometric laboratory. If it passes, the next process is to submit the application and pay the fee. If it does not pass we will need to correct the areas that it does not pass whether it be the LEDs are not bright enough, the materials are not to standard, etc. The whole process could take upwards to 18 months.
I don't even have that bike but now I want it !
It is great that these mods exist - created so perfectly for the bike.
Too bad Honda doesn't pay them to use these units - installed at the factory.
A great, better idea, and superior product like this needs to be rewarded.
holy this tutorial video is beyond step by step lol I will probably just get this headlight cos of this awesome video. watched the whole thing even though I don't have the headlight yet lol
Thanks for the comment, we try to be as thorough as we can in our videos so folks at home can easily perform the install instead of taking it to a shop.
Yesssss finally some decent lights for this bike, thank you so much for making this, I will purchase this soon
20:47 Had to stop my install tonight to wait for a dremel :/ Where the two outside metal collars go, the plastics don’t reach both sides on my 2024. Going to have to shave down a half inch or less in order to get it to fit it seems.
Before dremeling, check the distance between the holes. It should roughly be 17-1/8" from center-to-center-holes.
THAT WAS A GREAT DETAILED INSTRUCTIONAL VIDEO ON HOW TO INSTALL!!! IN THE FUTURE WILL THERE BE AN OPTION FOR THE LED BAR COLOR TO MATCH THE TURN SIGNAL COLOR??? IF SO, WHEN WILL THAT HEADLIGHT MODEL BE RELEASED???
We do not plan to offer that feature. It would cause the light to be not street legal due to the signal spacing requirement. Besides, the bike already has front turn signals on the fairing.
Is there conversations about the side markers being Amber and/or switch backs?
Adding switchbacks will cause the light to be not street legal due to the spacing requirements. This will be a huge factor if we decide to put them through ECE certification in the future.
These also fit on a 2024?
Great video, I want to buy these lights since I am trying to convert my 08- 2013+ I could see that your bike was also converted. Did you just cut the air intake from your 08. Is it possible to reuse the air filter from 08 or do I need to buy new air intake?
This bike we have is an original 2016 model and not converted. I am not sure what it would take to convert.
How much power/electricity does these headlight use in comparison to the stock? Power usage difference between stock and these awesome headlights? Thank you
Factory head lights pulls 4.24A for the low beams and 4.24A for the high beams @ 13.8V. Our low beam + DRL pulls 2.84A and high beams pulls 2.62A. This results in 33% less draw for the low beams (+DRL) and 38% less draw for the high beams.
Is there a way I can order them but the low beam light to be red instead of white??
Sorry we do not offer them in red. It would make them illegal for any red light at the front of the motorcycle.
Can you make a version with yellow turn signals PLEASE?
We have considered it but it will cause it to be not street legal due to the spacing requirement. Better to not risk it in the event we put it through ECE certification in the future.
@@motodynamic tru. I hear ya. I would have mine as an edition to the signals already on my bike. Currently I have signals on the mirrors and the side fairings up front as well as two sets in the back
They're so sick but I wish that the headlight's turn signals flashed yellow :(
Are the smugges on the lens on the outside or inside of the lens? I've seen that in a few videos and it looks like solvent residue.
It's on the outside, likely caused by the residue of the protective poly wrap after you peel it off. Or from fingerprint smudges during installation.
@@motodynamic Okay good to know, thanks for the reply
Can you turn off the headlights and just have the DRLs on?
You would need to install an inline ON/OFF switch on the low beam input wire if you wanted to just have the DRLs on.
Hi, may I know if my bike suitable for intelliflash or not? From Malaysia and its got hazard light button. Thanks
Check the front turn signal connector. If it is a 3-wire plug, then Intelliflash will work. If it is a 2-wire plug, then intelliflash will not work.
@@motodynamic you got any photo references? Because i want to buy it today whole set but not sure for intelliflash. I check it got 2 wire at signal only.
@@Muslym_7 If you only have 2 wires, then Intelliflash will not be able to plug in because of the difference in connectors. You can modify it to make it work, Intelliflash only requires ground and turn signal+ to make it work.
Awesome same bike 🥰👍
Will this fit for 2023 Honda Cbr600rr ??
Yes it will fit the 2023 CBR600RR
So it will not work on a 2020 Honda CBR 500R?
Sorry, it will not work on the CBR500R
I want a pair so bad?
Just picked up a 2023, how is the fitment on the newest bike?
The 2023 uses the same head light as the previous years so it will fit and function perfectly.
are these allowed in Germany ?
Sorry these are not legal for street use in Germany
@@motodynamic Could you elaborate? I'm looking for a dual mod headlight for 15' that is street legal in EU(Poland specifically). Is there any way to "make" them legal?
@@Shauddy The certification process to make them legal is called ECE. It involves testing the head light in a TUV photometric laboratory. If it passes, the next process is to submit the application and pay the fee. If it does not pass we will need to correct the areas that it does not pass whether it be the LEDs are not bright enough, the materials are not to standard, etc. The whole process could take upwards to 18 months.
Can someone please tell me if you can change the beam for uk roads please?
The beams are neutral so it can be used on either left or right and not blind oncoming traffic.
Solid but the wire to go across is not even close to fitting
Please reach out to customer support and they will be able to assist you.
are these in stock?
Yes, these are currently in stock and ready to ship
🙏👍 for the Kawasaki zx6r 2017
ZX6R 2017 coming my friend 😁
@@motodynamic when? 😱
@@awesomeerr8765 Trying for end of this year or early next year.
@@motodynamic I'd be one of the first ones to buy.
@@motodynamic hows the progress on the zx6r?
Cbr 1000rr??👁👁
CBR1000RR is planned for future development, but only the 12-16' models
So bad***