Brother pls guide me. About my Honda c- abs cbr250r 2014 model in which i did a mistake, that just for a rear wheel spin/burnout, i pressed the front brake lever which caused the abs trouble that = even upon sight pressing any of the 2 levers it gives a spring jerk on both the levers which makes the brake ineffective, with a sound such as something is rotating such as a spring in the breaking system. But when i took out the abs fuse the hydraulic brakes are working perfect{without abs}. I have already dismantled the abs modulator and re packed it. But couldn't find the cause of the problem. And the problem didn't solve. Pls guide, is it the delay valves which i should check and how to exactly where to look upon? And where the delay valves located in cbr250r? What could have gone wrong in the abs system which is causing a spring type feel on the brake levers. I also went to a Honda service centre, but that silly mechanic over there told me that he will first change both the sensor wires and then will go ahead. Which is not the cause of the problem i know very well. It was just the pressing of front brakes in this combined abs system for a small fun of rear tyre burn out, which caused this problem. Now it is several months i am using the vehicle but with the abs fuse out which means the hydraulic brakes are functioning absolutely fine. Anyone with knowledge about this combined abs mechanism please guide.
There is a part in the video where all of a sudden, the music gets really loud and the beat of it becomes annoying. The subject and the chosen animation are already dumb by itself. And since there isn't a lot of explanation about the ABS system which I'm still surprised how it can be that where living in the 21st century, still we feel like it's the caveman years of tech, it makes it even worse.
You seem smart I’m having an issue with my driver side brake holding pressure not releasing I’ve changed everything attached to the rotor and caliper. I’m starting to think it’s a valve in the stupid abs module. It’s an 03 civic ex… thoughts?
@@prod.guntype Hey my friend. Do you have prior knowledge about braking system? I don't mean to tease you, because I'm a student too, it's just the terms I'm going to use are here. Fluid Lines: AKA brake pipes. 1. Your caliper or brake pad might be seized due to rust and age, and it might pull one side when braking 2. If your brake is being pushed and not released it can be overheated brake system, using wrong braking fluid damaged or broken components, or DEFECTIVE ABS COMPONENTS. (WHEN WE SAY ITS A ENGINE PROBLEM IT CAN ALLLLLLLLL KINDS OF STUFF) HERE IS THE BEST I CAN GIVE. BUT MAKE SURE YOU GET YOUR CAR CHECK BY PRO. CARS ARE LIKE A LEGO SET AND ONLY THOSE WHO STUDY IT EVERYDAY CAN GET IT. IM HAPPY YOU DID A MAJOR CHNAGE THOUGH. AT LEAST YOU DID PART OF GHE JOB. ALSO CHECK OUT. " Common 2003 Honda Civic EX issues" And it's bringing four lists of problems. I hope you get your car fixed. Wish you the best.
![ABS [Anti-lock Braking System & Components]](/img/1.gif)
why did you add music in background ??
Cause learning is more fun when dancing
Please guide more about the spring u discuss about. I mean where can i find this spring in the abs syatem
Well explained and good engineered
Brother pls guide me. About my Honda c- abs cbr250r 2014 model in which i did a mistake, that just for a rear wheel spin/burnout, i pressed the front brake lever which caused the abs trouble that = even upon sight pressing any of the 2 levers it gives a spring jerk on both the levers which makes the brake ineffective, with a sound such as something is rotating such as a spring in the breaking system. But when i took out the abs fuse the hydraulic brakes are working perfect{without abs}.
I have already dismantled the abs modulator and re packed it. But couldn't find the cause of the problem. And the problem didn't solve. Pls guide, is it the delay valves which i should check and how to exactly where to look upon? And where the delay valves located in cbr250r? What could have gone wrong in the abs system which is causing a spring type feel on the brake levers. I also went to a Honda service centre, but that silly mechanic over there told me that he will first change both the sensor wires and then will go ahead. Which is not the cause of the problem i know very well. It was just the pressing of front brakes in this combined abs system for a small fun of rear tyre burn out, which caused this problem. Now it is several months i am using the vehicle but with the abs fuse out which means the hydraulic brakes are functioning absolutely fine. Anyone with knowledge about this combined abs mechanism please guide.
It’s like the video was made during a disco
Its selenoid sistem to move the valve ?
Explanation is cool the only problem is music on background it's irritating 😢
the music in background is so annoying.it decreases the clarity of the voice
Amazing video bro!
That music would drive you around the bend
Engineering at it's best
There is a part in the video where all of a sudden, the music gets really loud and the beat of it becomes annoying. The subject and the chosen animation are already dumb by itself. And since there isn't a lot of explanation about the ABS system which I'm still surprised how it can be that where living in the 21st century, still we feel like it's the caveman years of tech, it makes it even worse.
You seem smart I’m having an issue with my driver side brake holding pressure not releasing I’ve changed everything attached to the rotor and caliper. I’m starting to think it’s a valve in the stupid abs module. It’s an 03 civic ex… thoughts?
@@prod.guntype Hey my friend. Do you have prior knowledge about braking system? I don't mean to tease you, because I'm a student too, it's just the terms I'm going to use are here.
Fluid
Lines: AKA brake pipes.
1. Your caliper or brake pad might be seized due to rust and age, and it might pull one side when braking
2. If your brake is being pushed and not released it can be overheated brake system, using wrong braking fluid damaged or broken components, or DEFECTIVE ABS COMPONENTS. (WHEN WE SAY ITS A ENGINE PROBLEM IT CAN ALLLLLLLLL KINDS OF STUFF)
HERE IS THE BEST I CAN GIVE. BUT MAKE SURE YOU GET YOUR CAR CHECK BY PRO. CARS ARE LIKE A LEGO SET AND ONLY THOSE WHO STUDY IT EVERYDAY CAN GET IT. IM HAPPY YOU DID A MAJOR CHNAGE THOUGH. AT LEAST YOU DID PART OF GHE JOB. ALSO CHECK OUT. " Common 2003 Honda Civic EX issues" And it's bringing four lists of problems. I hope you get your car fixed. Wish you the best.
This video is very amazingly do english!!
Everything is annoying with this video. The AI reader, the music, the diagram… nothing is well illustrated
* you should not mixing the music sound , it make noisy !
Lol 4:16 what is the function soon you'll be known 😂🤣
厉害
why you leave RADIO on? no gud
My brother in Christ who TF type this up, a 2 year old?
The AI speech was excessively bad, and funny.
Engineering at it's best