✅ What is two way slab design reinforcement details | Green House Construction
HTML-код
- Опубликовано: 5 май 2020
- Welcome back to Green House Construction!
This channel shall be replaced Nha Xanh E&C Channel instead. Please follows me "SUBSCRIBE" this channel.
TWO WAY SLAB:
What is two way slab?
1. When a reinforced concrete slab is supported by beams or brick walls on all the four sides and
2. the loads are carried by the supports along both directions, it is known as two way slab.
3. In two way slab, the ratio of longer span (l) to shorter span (b) is less than 2.
i.e Longer span (l)/Shorter span (b) less than 2
This types of slabs are mostly used in the floor of multi-storey buildings.
See One way slab details at link: • ✅ Design of One Way Sl...
Next video will making different between one way slab and two way slab in details for your full of understand.
✔ Website: nhaxanhvietnam.com.vn
Hotline/Zalo: 0974665955
Fanpage: / nhaxanhchannel
If you see this video helpful, Please "SUBSCRIBE", like, share for further helpful videos.
Các bạn nhớ "ĐĂNG KÝ" kênh, like, chia sẽ để nhận được nhiều video hữu ích khác nhé.
Paano is the only one I have ever had in my spare years and was not able to make it
@@christianlalatavlog you
what is the thickness of the slab?
Thanks for this it helps a lot
watching ad to support your work. helped a lot to understand my father's renovation plans. much thanks
Really thanks
Thanks for providing this wonderful animated video, it is really helpful for students also these kind of animations takes time I can understand.
You are correct. I really appreciated your comment. Thanks
Thank you sir
This video is very important for understand of arrangements of steel in two way slab
Thank you very much sir. Have a nice day
Thanks for two way slab Building construction technical knowledge. to keep in mind .
Thank you very much
Beautiful work.
Thank you very much
Thanks! This was really helpful.
Hope you like it. Thank you very much and have a nice day
@ Yes. You too.
very good video, thanks!
Thanks sir
Very good information
thanks
Great channel 👍
thank you sir
Just want to ask. this video shows a non monolithic procedure of concrete pouring right?
Is it really alright to pour it this way?
Based on my knowledge, slab ang beam should be poured in monolithic.
please enlighten ... thank you
Wow thanks for showing this.,
Thanks you so much sir
Nice presentation. Keep it up. Please make more videos like this.
Thank you very much. Have a nice day sir
Nice one
Great work sir..
Thank you very much sir !
Thanks For Teaching sir
thanks sir
Thanku sir very helpful .
Thank you very much sir
Thanks a bunch.
Yes sir
Nice
Very good 👍👍 nice 👍👍
Thank you very much sir
ruclips.net/video/hyBvxdDuCd0/видео.html
Thanks man
Thank you so much. See you next video
Спасибо большое.очень поучительно.
Огромное спасибо
Very good nice video
Thank you sir. Have a nice day
Very impormative. Those is what I want...thanks. new subscriber here..
Really appreciated your comments
Nice sir. thank you so much for making this content. Done always support your channel sir..
Thank you so much
Great..
Best explanation
thanks
Thank for short course
Thanks sir. Have a nice day
Nhà dân dụng chả thấy ai làm được như thế này, làm thế này thì tốt quá đi
Nhà dân dụng tải trọng sử dụng bé quá nên làm sơ xài không bị gì.
Super video brooo keep going 👌🏻👌🏻🥰🥰
Thank you very much
What a very useful video sir👌👌😍😍plz make 3d model of bridge construction of all parts bar position like pile pilecap, pier, pier cap, girder, abutment etc plz👏👏👌👌
Yes sir. Thanks for suggestion
Good
Thank you so much.......
Thanks sir. Have a nice day
Nice Video ♥️
Thank you so much Civil engineering guide
ruclips.net/video/5yNmlBEJnNI/видео.html
Superb
Thank you so much .
Great!
Thanks sir
ruclips.net/video/hyBvxdDuCd0/видео.html
Your board Colour use so many colourful,,, reflect eyes
Hi, I have a question if you willing to teach me.
Should I bend the end of each sides of all main bars so the bend would resist pull out action of the rebar?
Or the bends are only useful if concrete mixture is poured together for slab and beams where their rebars are tie together?
In this video slab is not integrated with the beam, and thus their rebars is not tie together, I just asking if there when they are tie together.
I understand your concern about bend bar. All bar bend the end is the best. But consider actual outsite for worker can do
you are right, the slab should integrate into the beams. this video can only be viewed for entertainment, not for practical use in construction.
@ The actual photo of slab at 9:50 is totally made different compare to your animation. so why would you use this photo?
@@halalmeatshophk yes i've seen it also, the method used is just the standard method which is the "banig" type and not a 1 way or 2 way slab,just saying😁
It must be bend at beam. Must do hook at beam
My Qts is on crank bars are provided for Negative reinforcement at 200 Distance?
there should also be a Extra top Bar in between cranck bars for Negative reinforcement!!!
Design G+2 floor residential building column and beams.if u can do . Thanks
Salamat,...
Paanomo mai aaply iyan kung 3 layer lang ang bakal mo,kung sa residecial maisasagawa,eh! Halos lat ng nakita ko at ginawanamin e walang nakabennd,puede kung pang kumercial pangiaaplayan ganyang pag lalatag ng bakal,salamat.
Great Video
For 3.5×3.5M two way slap,please suggest size for main bar and distribution bar ..
This small size span. Main bar D10 distance 120mm-150mm is enough. Distribution bar D8 fully enough
@ 👍👍
Which software u will use this animated video sir
Why top extra bars are not provided?
How do I calculate reinforcement for Room Size 3.6m ×4.2m ?
Can u put those bent up bars with that series? Do it in practical and tell me
Yes sir
Sir thanks for d video ..kindly share about the plan of 3 m,x6m. floor ..2storeys..thanks
Yes good ideal sir
ruclips.net/video/5yNmlBEJnNI/видео.html
Very nice video
#studywitharniteen
Thank you very much. And have a nice day
ruclips.net/video/MTThTuM7zZg/видео.html
Sir in two way slab in each direction they provide 2 layers of distribution bars?
Yes sir. Both layers will have distribution bars in each direction.
Good day Sir.. Please help me... Is it possible to use 12mm diameter bar with spacing of 15cm for 3 storey house having a 4" thick slab?
Thank you for your question . Its over reinforcement . You can use 10mm diameter bar with space of 15cm. 2 layer that so enough bar
Sir I'm planning to build a large hall of 25 feet x 18 feet slab area. I gave 9inchx12inch 8 columns around the slab. There is no column at the centre of the hall. Will a headen beam work at the center? Or a regular beam mandatory?
If hidden beam ok then what will be the size of the beam and the rod size? Thanks in advance.
A good question sir. In this plan, your hall is large so that You need main beam at the center in two way. The size of beam : 23,6inch x 11,8 inch. You can reduce column . 6 column is enough.
@ thanks
@ plz explain to me what is a200 in this video?
@ and D10?
It mean 200mm space of distance
Tengo Losa 7.25 m x 4 m ; puedo usar D12@200 principal y D10@250 distribucion en los dos sentidos. la losa es de cisterna transitable para vehiculos .
Muito bom. Diga-me e se fosse um espaço de 5mx5m?
Yes sir
It woul be nice to name tha reinforcement like bottom1,2 or top1,2 also where is monololithic? Anyway thanks
thanks sir, sir which software your using for the video
Thanks. Its 3d architecture software
Structural Design Only.
You can also collect the Excel sheets from my channel for slab design free of cost.
bit.ly/2UK0nog
How to make this kind of video ..i need it for my project
how to make animation video search karo
😊
👍👍👍👍
thank so much
Lest say a slab is 3.5 by 6.77 meters... Will it be a one or two way slab?
Sir but we are not providing this much reinforcements in practical cases . Why?
What will be the spacing if I'll use d12 as main bar and d10 as distribution bar with the same 4x4 slab size?
D12 as main bar. I think reasonable space is 20cm the best
You have to design the spacing using 12mm vice cersa.
Salustiano Suay thanks for your opinion
Extra top baar nehin diaa
2 way slab has all 4 side bentup????
Which software do you use to make 3d models and also which software did you used for animation ?
Its sketchup software. You can install and use it
Any specific plugins you used for these animation on SketchUp?
Civil Er yes many plugins.
Can you help me ? Can you please list the plugins if possible? Would be great help.
See here dear
Hi NHA XANH VIETNAM what is the spacing of cranked bar?
In this video. the space is 20cm
Ek sariye me dono taraf ban kese ye galat hai na
software??
bro very nice explanation .can u tell me which software you used to show this in imaginary form
Send to my email your question
@ what is your email how i can get your email address
@@practicalcivilengineer6846 boss what is the software pls
Sa tingin ko SketchUp ang ginamit niya.
👌👌👌👌👌
Thank sir
Brother there is no provision of distribution steel in two way slab .
Kindly check
Main steel is provided in both directions
Youre right on main steel is provided in both directions. But distribution bars are needed to shape main bar on their right position in both sides
कोनसा सॅलप घर बनाने के लिये आच्छा है one way or tow way , which slap are best for home pls told me
Two-way slab is the best if you don't know that slab is applied oneway or twoway slab. Onemore, twoway slab accept to apply for two cases. But oneway slab can not accept for twoway slab. Consider your budget if you don't know which one apply for oneway which one apply for twoway. Really dangerous
If we want to extend slab at one side about 4 ft in two way slab then what to do to make slab stong
Easy sir. Please see this video:
Cách bố trí thép sàn conson và sàn một phương | Green House Construction
I can't understand your language please reply in English
Sorry sir. Please see newest video of my channel . You will have the best answer.
The spacing between main bar and cranked bar is 100?
You are right
Hi sir
I have hall of 17.5 and 17 feet. With 4 nos column with 9 inch wall. Can I plan 2 way slab and canceled beam.
Can suggest please
Thank you
Sure! Totally You can do it without beam.
@ thank you
Make a video on slanted rcc slab reinforcement please
Its nice suggestion
@ i am waiting for that video..thanks
@@manojtimilsina6789 yes
@ not ?
Manoj Timilsina slanted rcc slab like Roof of house. Right?
Where is the development length of the slab
angele of bendind, or length of bending bars?
thanks for your comment. angle of bending about 60 degree and the length of bending bar about 10-12cm
Watch here
Is it possible for 4inch thick concrete slab?
It is so reasonable and possible with 4 inch thick of slab.
Sir please suggest main bar and distribution bar dia for 2 way slab 9m x 10m
Structural Design Only.
bit.ly/2UK0nog
Its too big space between 2 two columns. sir. Please reduce space
You mean, the cranked bar is the Main Up Layer?
yes sir
bothways slab Yan ha,,,, Ang tawag Yan quarter at el over four elabas mo pra makowa Ang long span at short span
Crank bars will be alternative in each ends
Yes sir
wawo
Background music is very disturbing
where are the extra tops
Great but it's over reinforcement
Thanks so much. This is for your safety house.
ruclips.net/video/MTThTuM7zZg/видео.html
which slab is better for 2 story building - one way slab or two way slab ?
Twoway slab will be better . Dear sir
@ - Thank you Sir
Which slab better on wall 8*4 meter one way slab or two way slab?
Its one-way slab is ok but two-way slab is better than
@ Thank you for your response!
What is the length of bent up bars?
Thank for your comment. Its about 10~15cm length of bending bar.
See here dear
How many steel is provided, that cross each other
It have dimension or space every bar sir
Nice educational videos.can I suggest me structural engineer pdf
Thank sir. You are welcome
@ sorry, can u suggest me structural engineer ebook or link.
@ limit state method book.
@ I am a civil engineer knows all concept but only weak n structural calculations.ur videos are nice. Keep it up.god bless u
Sir this is just my knowledge in my school only. It have no ebook sir
Why is the slab on the beam not inside the beam?
I think we have to provide crank bars in alternate position.
Crank bars already had in this video sir.
Ok
Make a video on slanted slab reinforcement details please with all details
Great idea. Thanks
Good suggestion bro
ruclips.net/video/MTThTuM7zZg/видео.html
@ i am waiting for that..thanks
15" X 13" two way slab please.. Main bars and distribution bars size.. + Distance.
Main bar is 10mm and distribution bar is 8mm. Distance 15cm. Two layer
@ sir how about 7mx8m
@@josephanne4363 it a big slab. Two layer paralel required. Main bar d10 . Distance 15cm
ruclips.net/video/5yNmlBEJnNI/видео.html
Sir, pno b magbasa ng plano ng bahay..romel
can you explain more detail? I will reply afterthat
Why not Alternative bentup bars?
Bent up bar already sir
I am talking about alternate bending
it depends how you want to do .u can give alternative bent up or you can but starlight bar and next is bent up on both side.
ruclips.net/video/5yNmlBEJnNI/видео.html
watch this video u will get idea.
Agr explain kro to mza aata
see more our video and leave your comment
Yes dear
That kind of method not using today