Это видео недоступно.
Сожалеем об этом.
Can NEW Tread be put on a Tire? custom tread patterns!!
HTML-код
- Опубликовано: 13 май 2022
- Bald tires get a second life
PR1500 Rubber Weld 3M: amzn.to/3FJnUZW first choice after experiments
PR100 Rubber Weld 3M: amzn.to/3Lq5IpY
PR40 Rubber Weld 3M: amzn.to/3JGuv8F
TIRE BUFFER for drill: amzn.to/3FVZQ6B
Milwaukee Right Angle Die Grinder M12: amzn.to/3utKb9c
Roloc 60grit 3in wheels BEST MADE/LASTING: amzn.to/3l7VtLP
Small Folding Razor Blade Knife I always use: amzn.to/3IFDRAr
SIDEWALL GASH repair Kit with rubber, glue, sandpaper: amzn.to/35bcMr0
********
CANADA GUYS:
Just a heads up the 3M PR40 can be hard to find/expensive in Canada. I'm told thes glue works great as well through a commenters who are in Canada. amzn.to/3wvXOFM JB super weld and amzn.to/3Lb4cYo Satellite City Hot Stuff Special T CA Glue. Any of the 3M PR series glues work just fine and one maybe easier/cheaper to come by(pr40, pr100, pr600, pr1500). The only difference in those glues is the thickness. So with the PR1500 it's more gel like vs water so you will need to make sure to squeeze out the excess.
*********
Thoughts:
I think I like the slightly thicker glues vs the thinnest. On the data sheet the thinner PR40 is the strongest but I think only if you can clamp it. The thicker glues pr600-pr1500 fill in gaps much better and spots that may not have touched on the pr40 are now bonded. So the thicker may actually be stronger in real world applications. You do not have any working time with this stuff(thicker glues have longer working time(seconds). You need to apply it, stick it, hold pressure and be done. Anytime you move, lift a corner etc it sets up and will not bond. You need to simply re-sand the area and piece and try again.
FIX:
Bias Ply Tires
Tractor tires
ATV tires
UTV tires
Garden equipment tires
Off Road Tires
Mud Tires
Paddle sand tires
Boeing 747 tyres
Tire Grooving
The spare tire around your waist
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com...
sixtyfiveford
sixtyfiveford/
Wow this brings back some fond memories. Tampa Cord Rubber Safety Products - Back in the 1950's my father invented a door mat made from cord rubber car tires. They would last a lifetime and easily removed the sandy soil from your shoes prior to entering your home.
He had a custom machine made to cut the wire beads out of the tires and another custom machine to cut both sidewalls and the tread area into one continous piece. He also had a old Rockwell drill press that had a custom made fixture that held 6 drill heads that were chain driven. He used leather hole stamping punches in the drill heads to drill the holes in the cord rubber strips in a given pattern. Once the holes were drilled he could cut the ends to size depending on the size of door mat we were making. He even made some horse trailer mats which would also last a lifetime. He also made the first dock bumpers that you see today that are made from truck tires. On some tires he would buff the tread off which made rubber dust. He would wire the two opossing tire beads together and mix concrete and rubber dust together to make steeping stones. Basically, my father was BIG into recycling. If he were alive today he would have been a HERO for making a GREEN planet. Taking some of the hardest items to recycle and making really usefull products from them. One time he even made me a pair of soles for my shoes from the tread section of the tires. Of course, others copied his idea and made sandels from them.
Thanks again for the memories!!!
Interesting story! i was raised in St. Pete Florida in the 50 and 60's. Small World. I went to U. of F. Gainesville and got an engineering degree.
So cool! Back when we made quality things right here in America. Much respect to your father.
I have a pair of recycled tire sandals. lol
That's awesome. Ingenuity at it's finest.
I remember seeing these mats. Thanks for sharing.
Stay well, Joe Z
Wow, I was skeptical. Would be interested to try re-soling a boot with that stuff.
I did it just on a whim with the UTV and didn't think it would stay on long. I think I have 60miles of dirt/gravel road on it now and it's still holding on.
@@sixtyfiveford just got me some of the ph1500 glue.going to try and repair a hole in waders.
Thanks I bought a bottle of PR100 after watching your last video about the adhesive, to repair an impossible to get weatherstrip. It works great, stays flexible and holds better than anything else I tried.
Great to hear!
Nice I need to order now
This could be used to repair tires in many ways. Definetly a life saver in these times of shortages. Thanks
Great point!
Same brand as your scissors, but a good sharpened pair of vintage forged (#9, A-10, or 12") Wiss tin snips works really well for thick rubber and leather. I keep a pair tuned up just for jobs like that.
There were a few impressive things in this video. The resourcefulness that you poses when it comes to getting your money's worth out of something. I never would have thought to repurpose old tires for this. The glue was very impressive in it's strength and it's price to performance. Even the dog was impressive in how well he rode with you and followed you 😂
I’ve said it before but how can anyone not love dogs? They truly are man’s best friend for several reasons. They’re always glad to see you like the tasteless and tactless joke about how to see who loves you the most your wife or your dog. Lock both of them together in your trunk and return an hour later and which one is glad to see you. They’re ALWAYS glad to see you. They’ll stick by your side all day and patiently wait for in the car while you’re shopping. Gotta love our dogs and yes there is God because only God could make such reliable friends. Ginger you’re an awesome girl!
Great analogy!
A tire this small their cheap enough I would just buy a new one but this is for science! Lol thanks for another great video
Thanks for watching! I think I paid around $15 for that tire 10 years ago, but I'm sure with inflation it's $50 now.
Another Great Video!! You do excellent research!! Love your attitude to get all the use out of items that you can!! Great skill set that you have! Liked !!
Thanks again!
I bought this stuff IMMEDIATELY after your last side wall video. This stuff is pretty amazing. 3M should totally sponsor you BTW!! Great video, I could have saved so many off road tires over the years!!
Brilliant!!! DIY retreads. The body of the tire is good. It is only the rubber that has worn away. And you show us how to do it. Good job!
Next Project make some punches like for leather so you can stamp out diamond shapes etc....
Neat idea
Found tube of 3m Amazon $70.
3M Scotch-Weld 25265 Plastic & Rubber Instant Adhesive PR Gel, 20 g Tube, 0.676 fl. oz. for 31$
You are right on that is some tuff glue.
I'm told this glue works great as well through a commenter who is in Canada(Cheap there". amzn.to/3Lb4cYo but I haven't personally tried it yet. "Satellite City Hot Stuff Special T CA Glue"
I have the exact same go kart. Ours is on its third motor and I’ve rebuilt the jackshaft and converter more than once but the kids have had a ton of fun. Love your channel man.
I think I did bearings in the jackshaft when I first got it. I have owned a lot of gokarts but this one stuck around as it was so much fun for me and kids.
I finally got around to ordering a bottle through the link in the description. Thanks!
More, I’ve had great success cutting sidewall rubber to make 65Ford bungee straps with an oscillating multi tool.
Good idea. Saw a guy use a hook blade in one that cut like butter
I posed this question to some guys at work about re-gluing tread to a mini-bike tire.
Thanks for this!
I could have sworn I heard Ginger say "faster" during the test ride. Might be able to find used tires at a motorcycle shop to cut up. Thanks for the upload.
This is the best NOBEL prize worth video I have seen. Fantastic as usual!!!
Fantastic video this would have been great a few years ago on a tricky caravan repair. Love your stuff good to see you posting stuff again
Glad you enjoyed it
Love the way you think...this might come in handy on my old garden tractors
I love the milwaukee right angle grinder, people complain about the power and the batteries not lasting long but not having a cord is so nice
Man took the tire wall off a continental procontact, talk about budget tread. Lol love the content
I bought the pr100 from Amazon last week. I haven’t tried it yet but I carry it in my motorcycle tire kit. Now I can’t wait to get a flat 🤣🤣👍👍
Hope you enjoy it!
Alternatively, you can use vulcanizing fluid and a hot iron. That’s how they assemble tires and rubber gaskets.
I like ur Milwaukee die grinder most. I got to have one now. 😁
Future 3m sponsorship: 55 gallons of scotchweld.
With 55 gallons of it I see a future video... build a whole tire from scraps of sidewalls. BETTER THAN NEW ! lol
@@nothere7198Ha, exactly what I was thinking.
55gallon drum.... Sounds fun.
This was a lot of fun. Since this stuff stays flexible, I might try it on a self-inflating camping pad I have. Nice and thick, great for old hips and back like mine, but I scratched the bottom and there is one particular spot that I cannot get to hold a seal. I have tried everything else, they not this?
Thanks for your videos, Moe. Not sure anyone else out there is gluing new tire treads.
Also good for rubber duckys and rubber baby buggy bumpers!
Great video and tips, thanks, Moe!
might want to run those tires with less pressure
use white shoe polish and drop pressure till all polish wears off across the tread. thats ideal for tread wear.
That's a great idea! I just bought new tires for my Baja mini bike, but I kept the old ones. Might have to try this. 👍
I had that same go kart my whole childhood growing up.
Awesome.
Impressive. Bugger that Amazon Aus doesn't sell it though (we cant use US amazon in Aus) and ebay ends up at $65 Aus after shipping. OUCH!
I'm told this glue works great as well through a commenter. amzn.to/3Lb4cYo but I haven't personally tried it yet. "Satellite City Hot Stuff Special T CA Glue" Not sure if that is available in Aus.
Nice job, man! Cool method. Good way to save tires that aren’t too dry or old that you’ve just worn the tread off of
They also make a gap-filling PR gel. It's your basic cyanoacrylate adhesive that cures with moisture. That demonstration is excellent. Brings a whole new meaning to Yerf Dog with the pup riding!
Good stuff Moe. Looks like Ginger likes gokarts too. I've always been VERY impressed by any 3M product I've ever used-and I've used a lot. Thanks for posting.
I'm about to do a chicken 🐔 and produce turnaround run from Atlanta to Los Angeles to Atlanta. I'll glue this on grossing 80,000 lbs. Will glue tread on 18 tires and let you know how they hold up. Sure nuff if you could simply glue the strips of tread on it would be safer. When the entire cap blows on a recap it's a massive explosion. If these strips started to come loose the driver could cut them off one by one at the tire.
Definitely interested to see how they do!
I too would be very interested, for what it's worth, I feel this is as serious a test as it gets. If you find this effective, it will be worth giving it go on forklift steering tyres which take a beating and chew out fairly quickly . Good on you for giving it a serious test. Thanks
@@davidp8157
Honestly I was just being a Smart @$$. Would be afraid the DOT would shut down a ride instantly if they happened to notice this. They are a ruthless bunch. They to Love to prison rape any driver who strays from the pack.
If you're talking about all terrain construction forklift steering tires , this would be the ultimate test for this glue. A great older friend of mine who finally had to throw in the towel a couple years ago ran a couple 580 Case Construction King forklifts. He bought 4 new steering wheels for them. He had me to double weld plate steel in the center of the wheels because they kept bursting out at the most inopportune times. Anyway no more broken wheels but I've seen whole chunks of tire caps missing from them.
@@coburnlowman i thought you were keen, especially with your name on it. All the same , thought provoking....
Nice! I've seen where decades back retreading tires was more a thing. Even true'ing tires when there's cupping so don't have to deal with the noise, i.e. assuming repairs or adjustments have been made that caused the cupping. Wondering how long will hold up without the pressure vessel or heated press like machines? Seems good to go for the long haul. Thinking like the TruckerCo Tire Cream and like you showed Tireject... will have to get some of this Scotch Weld next. Thanks for sharing! Totally was thinking about like the snow chains too.
I thought you were gonna tell the dog 'You're adopted'.
I don't the heart to tell her that yet....
Thanks for the heads up🇨🇦. I might try some local specialty shops as prices online are high with crazy shipping costs for the 3M stuff.
I'm told this glue works great as well through a commenter who is in Canada. amzn.to/3Lb4cYo but I haven't personally tried it yet. "Satellite City Hot Stuff Special T CA Glue"
Best part about this video was your dog riding with you...🐕
This is amazing I wish 14-year-old me new this
Definitely going to get some of that Rubber Weld for my toolbox....seems like amazing stuff. Ginger looked surprised at first to hear she "was a dog" LOL...so intelligent!
Thanks 👍
Another amazing idea, that no one else seems to have thought of.
I have got to try that glue. I have many experiments waiting to test it on!
I knew it would say 3M on the bottle. They make the best glue and tape!
Great video thank you for the information I need to get some of that stuff!
That glue is amazing 👍, and so is Ginger, she is a sweet heart. Yoda has a crush on Ginger. 💘
You have a lot of interesting ideas
Hey thanks.
stack 3" 2" and 1" wide x long strips giving 3 forward edges for traction. then you could stud the tread for winter traction.
I'd like to see you try a different technique where you could take a brand new or slightly used ATV tire with a bad sidewall and just cut the entire size out deflate your tire and then slide that over top and then just inflate your tire to pinch it together it seems like it might be a safer longer-lasting tire and still give you good flex
A whole new meaning to retreads
Lol.
nice CVT there ....and nice dog!
thanks for the recommendation I will definitely check this stuff out
I didn't really trust "any old superglue" at first but damn I am happy you went through all the effort to prove it's worth!! Thanks!
I Love Your Work!
Thank You :)
Glad you enjoy it!
YES, its called re treading & has been done for years.
Even today simi trailer tires are retreaded.
!
Very cool repairs. I'm going to get some of that stuff for sure!
Haven't watched the video yet. But I'll tell you right now. If it stayed together for the length of the video....its a miracle.
I have the exact same tires in the exact same shape. Youd be better off to turn em into snow makers/studded ice tires.
That's what I want to do with mine.
Sweet puppy.
Buy inner tubes why you still can. Cracks in tire, no problem, leaks gone, make tube stem fit right where old tubeless stem was.
Man you just come up with some amazing stuff time and time again I love your channel and Ginger poor girl when she fell out.
She's very agile and more or less jumped out.
I'm curious about this glue. I have a gash on my sidewall tires and I'll used this glue too see if it well hold up
Wonder if that can save dry rot? Guess I could do a tube but also thinking about it for motorcycle tire so maybe higher speeds and not safe
I did glue a couple larger dry rot cracks together in another go kart tire and it held. I would probably pass with tires that saw any real speed.
Thats a great dog
Just wondering if you have ever experimented with trying to "stud" any tires for ice traction? This would be a great idea for odd size tires in the frozen north country if successful. I have seen different attempts on various vehicles such as motorcycle tires but they were not using the gluing products instead opting for tubes.
Use some soapy water when cutting the sidewalks, makes the blade slide much easier
Ginger was ready to GO but Ginger is ALWAYS ready to go. Thanks, Pal and GBWYall!
You bet
Need 2 do that on my R/C Tires lol 😜👍👊✌️🦅🦼🇺🇸
Nice 👍🏻. Going make custom mud runners for my Honda 300 4x4. Because Honda 300 4x4 uses 1” difference between front and rear tires. Have 26” all way around so going build up way supposed to be. Got something to do with transfer case. Or front ring pinion not matched. If do lot hard road rides that’s what’s tears rear ends out. Trust me see lot 300 4x4 rear ends gutted. 4x4 only 2x4 you can use same size. That’s I’m formation from older great Honda mechanic. Frank. Franks atv. Get all your atv needs. Franks atv Smithers WV. Not sponsored by him just good place to go good price’s.
Love video’s. Keep um rolling will retread our subscriptions. lol. Stay safe. From ur ole hillbilly buddy.
Hello from Rexburg, ID! Love your channel. Probably in my top five (& I subscribe to a ton). Bought some PRT40 to add to my motorcycle kit.
Hey thanks from Utah. -Moe
Excellent video/test!
That's some cool stuff. Thanks
Thank you!
I bet one of those metal cutters that attach to a drill would cut tires really well too.
Probably, good idea!
Your side seat driver is the coolest
Heck yea! Cheap set of AG tires for my cheapo Craftsman lawn tractor!
I have a tractor that's going to hey just that.
I like this series on this glue. Have you tried it on plastic? Or rubber to metal?
I haven't. I need to give it a try and see how well it holds up.
My dad used PR40 to fix a plastic kids slide that had cracked. He also fixed a plastic wire attachment connector thing (that's the technical term) on his truck. He said it bonds plastic immediately, so make sure you get it right the first time or it'll be lopsided like both of the things he fixed 😉
carb cleaner contains MEK and benzene for those that don't know. Yeah, don't get those on your skin.
It’s really amazing, you made of rubbish a usable thing! Ginger made the quality control! 😂 thanks for your video!
Glad you liked it!
I have the same pocket knife and have been carrying one for years. Awesome knife but they use plastic washers as bearings and they always wear out and the hinge gets all floppy.
The little Gerber EAB is a fantastic knife.
@@sixtyfiveford Yeah they're great. I have like 9 of them just scattered everywhere.
@@rjsprojects The one in the video is the old style and I think built a little better than the newer style with the tapered handle/slots cut in it.
Sander at hi speed sounds like Antie from "Honey, I Shrunk the Kids"
I had a car tire that was indestructible, 100% wire re-enforced, needed a monster hardened shear blade machine to cut it.
Got to find a soft sidewall tire for this.
Your going crazy with that new glue
Everything works out for you but at times it is easier to get new tires for what you might be spending on the repair then again that is my opinion
Since it works so well for the tire itself, I wonder how well it would work for fixing bicycle inner tubes. It seems like a superior glue to rubber cement.
The advantage I have seen for using rubber cement instead of contact cement is that the rubber cement will stay flexible, and the contact cement will be hard.
How does the PR100 dry? flexible or hard?
That glue is amazing. Ginger thinks she is a short human haha
Super duper glue! 😅👍
Sweet demo!
Thank you for the video. What do you think about pr100? Does it work like pr40?
Thanks from Texas Moe
Why not sand the out side of tire.leaving the rough side for a little more tracsion?
Super glue works great!
My dad used to hot knife his 40" pitbull rockers and boggers when they got low!
MM77 Approved 👍🏼👍🏼
Impressive!!
I never thought the pieces would stay on.
Carb cleaner has oils in it for upper cyclnder lube
No it doesn't. It's just 99% Acetone and sometimes MEK which are amazing degreasers. It's purpose is to dissolve gas (oil product) not to lube an engine. I've used it hundreds of times before painting and it's probably the best degreaser out there and beats brake clean hands down.
why isn't better to leave some ridges and roughen up the surface of the repair tire instead of smoothing both surfaces?
awesome thank you
I think carb cleaner leaves a residue unlike brake cleaner
Using that glue, it would be cheaper to buy a new tyre, however I suspect there is a cheaper way of doing it.