I just learned more about that Meglodon in that short video than any other video, outstanding job demonstrating the safety functions and demonstrating the action in general. I ordered on of the Meglodon’s from a place not too far away from me on Friday. I had no idea the rear tank was configured that way, I would happily purchase an additional rear tank and that different end for the front tank from you for the rifle I’ve already ordered. I don’t know how I missed this channel before I ordered the rifle, I ordered the 22 inch barrel version in 457, this will be the first pcp air rifle I’ve purchased. I find them very interesting , I thought about getting something different , a little cheaper maybe , after watching you demonstrate the functions and explained the rear tank set up, I’m glad I went with the bigger rifle. I like to shoot out to whatever I’m shooting’s maximum effective range. It will be fun figuring out where that is on that rifle. I’m assuming the longer barrel version is set up the same way concerning the rear tank. The only difference was overall capacity was maybe 100 cc more for the 22 inch. I looked at so many I may have that confused with something else.
I love the fact that they made the gun fillable from the rear stock. Makes it more tactical. Now you can wear your tank and fill up your rifle without having the cable go all the way to the front or middle 🙂 Still don't know why they haven't gone for the AR-15 grips though. That would make for more customizability.
Picked up the same cal in short--will be here tomorrow. Curious to see the followup video on shot count with both tanks (and with just front). Thanks for showing some of the details.
Cool looking gun, I love the pump bolt action... megalo=great don=tooth (name of a great jurasic extincted shark, cool name). The size of the magazine & ammo is impressive... I wonder how reliable these guns are.... To this moment they are not legally regulated in my country but who knows what the future holds...
I just ordered one this past Friday, I hate ordering stuff because until you hold it , you don’t really know what you’re getting. I liked the 22 inch version over the shorter barrel. It seems like you are more than happy with yours. I have to patiently wait for mine to get here now though. First one of these air rifles I’ve bought. I would like to ask if you could make a good slug recommendation, if you know of one. 457 is what I ordered.
now this customized option i can really dig. but for the moment i am getting the T9 and edguns exploding 82gr slugs. smiles i will worry about the mega around my birthday , thanksgiving. yall have fun. endcap is important. cause that means it is the same tank as on my hp standard custom edition .25 and i happen to have a regulator brand new from AEA to go in that. shhhh THE LAST WORD
The hp max would be more reliable. There's a bunch of parts for it and easier repairable. This is a new product. You won't know what the issues are with this gun for a few months. The area defender 2 was a nightmare when it came out.
@@413Airguns Guess what? I received my .58 megalodon from you even though it was purchased thru someone else , however from now on seeing as tho your the distributor I'll buy directly from u at this point forward. Just wish I knew about u sooner . Regardless I love this thing it's a super badass gun
@@413Airguns Your more towards Connecticut so u probably never heard of the name . Well I purchased a blitz from the same place and it won't charge and I've researched and did everything I could to charge it but just keeps pissing air out . My plan is to call them and send it back for repair my dime because I want the gun anyway . Do u have any suggestions before I do that ?? I've tried about everything except changing every oring on the gun.. advise??
Hey bro I order my first bin tan customize in air fox power I order it the 04/23/24 I just waiting my my question is I want to put the same rear butt stock but I don't not if this style butt fits in bin tac .50 customize
If what you ordered from fox is bintac m50 whatever version yes a rear stock can be added to it. If is a bintac s45 can also add rear stock just need a extra adapter for it with the stock
All my PCP guns hold air indefinitely. Unless there is a seal failure but I keep an obscene amount of o-rings and rebuild kits around for that eventually
Hey bro I talked to you on the phone a while back … u have anywhere we can shoot my fx impact m3??? Lmk I bought like 15 tins of amo 😂 my names Zack we talked on the phone for like an hour
@@FeralEater I did have somewhere to use it … and if I can’t continue to use it I’ll find somewhere else some people around rude like you and don’t mind others shooting if they have a place to shoot ! Ur obviously not part of the airgun community because we help eachother out ! U don’t know my situation….
hmmm so what if i chanbed a slug then cock it . place it on safe so the probe now goes ALL the way back will it change a round then? seem like it will chamber a round if cocked placed in safe then cocked again correct me if im wrong
Once chambered and the safety is on no it will not load another slug until the trigger is pulled to fire or, if you decock the trigger with a round chambered the rifle thinks you pulled the trigger and they yes you could load a second round into the barrel
I like everything about this excepthat's putting the gauge where you have to look down.The barrel which is outdated and does not make sense at all. No one wants to stare down the barrel to see how much air is in the tank
I am sure it leaks just like everything AEA Bin Tac makes . Wasted money is how I see AEA and the WORST attitude ever from a supplier. Bin uses his customers to prototype junk . This is a Chinese company that acts that way.
Out of many I've bought only one leaked and Bin Tac replaced the part for free (it was a faulty regulator) with no questions asked. I completely disagree with your assessment of BinTac customer service.
Block these losers Pete! They don't even own AEA OR BINTAC guns and they are running their mouths based on BS and what some toxic person said to them! Get them out of these groups and videos they don't deserve a platform to speak their BS from!!!
Sometimes you have good luck, other times you have bad luck, I know a lot of people and myself have had good luck but other people like you've experienced, have had bad luck, it's a good product, but like all things some people tend to get lemons, I will agree though that it seems more 50/50 with these products and sometimes you've got to Tinker it yourself to make it work.
@@jdp5704 I have had the same good experience with Bin Tac. Wonder how many of these guys with a "bad experience" have gone into it with a poor attitude that precipitated the bad experience?
After purchasing 30cal HP I’ll never buy another AEA product again. My magazine had issues couldn’t find a single mag for over two years. I gave up on it and tossed it. Waste of money. Buy a real gun.
THANKS FOR YOUR DEMONSTRATION.. THIS PROVES TO ME I MADE THE APPROPRIATE DECISION TO PURCHASE THE EDGUN LESHIY 2. THE AEA IS MORE AFFORDABLE YET A WASTE OF MONEY. THAT THING JUST SOUNDS SUPER LOW QUALITY....
I just learned more about that Meglodon in that short video than any other video, outstanding job demonstrating the safety functions and demonstrating the action in general. I ordered on of the Meglodon’s from a place not too far away from me on Friday. I had no idea the rear tank was configured that way, I would happily purchase an additional rear tank and that different end for the front tank from you for the rifle I’ve already ordered. I don’t know how I missed this channel before I ordered the rifle, I ordered the 22 inch barrel version in 457, this will be the first pcp air rifle I’ve purchased. I find them very interesting , I thought about getting something different , a little cheaper maybe , after watching you demonstrate the functions and explained the rear tank set up, I’m glad I went with the bigger rifle. I like to shoot out to whatever I’m shooting’s maximum effective range. It will be fun figuring out where that is on that rifle. I’m assuming the longer barrel version is set up the same way concerning the rear tank. The only difference was overall capacity was maybe 100 cc more for the 22 inch. I looked at so many I may have that confused with something else.
I love the fact that they made the gun fillable from the rear stock. Makes it more tactical. Now you can wear your tank and fill up your rifle without having the cable go all the way to the front or middle 🙂 Still don't know why they haven't gone for the AR-15 grips though. That would make for more customizability.
Picked up the same cal in short--will be here tomorrow. Curious to see the followup video on shot count with both tanks (and with just front). Thanks for showing some of the details.
Cool looking gun, I love the pump bolt action... megalo=great don=tooth (name of a great jurasic extincted shark, cool name). The size of the magazine & ammo is impressive... I wonder how reliable these guns are.... To this moment they are not legally regulated in my country but who knows what the future holds...
Megalodon is far more recent than the Jurassic, Myocene-Pliocene. It's why they might still be alive even though it would be extremely unlikely.
Can you change barrels between the 15 inch and 22 inches?
Dang, great lighting and camera focus. What camera is that?
That’s a neat customization 👍🏼
Hello thanks for the video. Is the stock you adapted standard type? Just remove and put on?
I've had my 22" .457cal dual tank Meg! It's fuckin gorgeous.
I just ordered one this past Friday, I hate ordering stuff because until you hold it , you don’t really know what you’re getting. I liked the 22 inch version over the shorter barrel. It seems like you are more than happy with yours. I have to patiently wait for mine to get here now though. First one of these air rifles I’ve bought. I would like to ask if you could make a good slug recommendation, if you know of one. 457 is what I ordered.
can you tell me if this fits the megalodon as well, is the meg a 18-1 thread
I would love to see you fill a Megalodon from the rear . . . 🤣🤣🤣Nice rifle by the way.
BinTac muzzle break for Element Max And HP Max 457/50/510 M50 S45 does this fit the megalodon as well
Can't wait to order mine maybe even to a shorty and a long!
I. UK I know we have power limit but love it looks great design
Ive seen other youtubers call it a shotgun. Is it rifled?
Yup
Why would you change the stock??..2nd tank why it called a megalodon for POWER
Sweet ass Sweet as usual Pete!👏👏👍👍👍
now this customized option i can really dig. but for the moment i am getting the T9 and edguns exploding 82gr slugs.
smiles i will worry about the mega around my birthday , thanksgiving.
yall have fun.
endcap is important. cause that means it is the same tank as on my hp standard custom edition .25
and i happen to have a regulator brand new from AEA to go in that.
shhhh
THE LAST WORD
Love this
Is it the same grip as the other models? Need an adapter to swap out the grip?
was going to order an hp max with a pump kit. now i'll wait
The hp max would be more reliable. There's a bunch of parts for it and easier repairable. This is a new product. You won't know what the issues are with this gun for a few months. The area defender 2 was a nightmare when it came out.
Im getting mine tomorrow and camt wait. Also from the 413 as well but live in the 317 now. O probably know u or u may know Ayotte construction
@@chandler4749 I know a Bret
@@413Airguns
Guess what? I received my .58 megalodon from you even though it was purchased thru someone else , however from now on seeing as tho your the distributor I'll buy directly from u at this point forward. Just wish I knew about u sooner . Regardless I love this thing it's a super badass gun
@@413Airguns
Your more towards Connecticut so u probably never heard of the name . Well I purchased a blitz from the same place and it won't charge and I've researched and did everything I could to charge it but just keeps pissing air out . My plan is to call them and send it back for repair my dime because I want the gun anyway . Do u have any suggestions before I do that ?? I've tried about everything except changing every oring on the gun.. advise??
@chandler4749 sorry not a fan of hatsan I dint carry them
Hey bro I order my first bin tan customize in air fox power I order it the 04/23/24 I just waiting my my question is I want to put the same rear butt stock but I don't not if this style butt fits in bin tac .50 customize
If what you ordered from fox is bintac m50 whatever version yes a rear stock can be added to it. If is a bintac s45 can also add rear stock just need a extra adapter for it with the stock
Thank you so much 😊
What about a bigger tank like 500cc?
If not then at least a double barrel adaptor like with the blitz or fx
The dual tank 22 inch is 600cc
Dual tank 15 inch is
500cc
From watching other videos dual tank configuration looks like a must in my opinion
How much sir.
Well just seen my next pcp, AWESOME
Is it a semi auto, with pump action magazine release? Or a full pump action only?
Pump action only
I want one! Also, how many shots with only the front tank?
I will be testing with luck tomorrow
Any smaller cal. Like 30cal?
Can grip be changed out with other styles? What is lop with rear tank?
They require an adapter.. For some reason AEA hasn't switched over to a standard AR platform grip (at least to my knowledge).
Do the tanks lose pressure when filled then left to rest over weeks or months?
No they should hold the pressure once filled, it's not recommended to store a air rifle with no pressure in them.
All my PCP guns hold air indefinitely. Unless there is a seal failure but I keep an obscene amount of o-rings and rebuild kits around for that eventually
How many rounds can you shoot before need refill the tank
Watching the other video he made with dual tanks 16 to 24 shots
Hey bro I talked to you on the phone a while back … u have anywhere we can shoot my fx impact m3??? Lmk I bought like 15 tins of amo 😂 my names Zack we talked on the phone for like an hour
@@FeralEater I did have somewhere to use it … and if I can’t continue to use it I’ll find somewhere else some people around rude like you and don’t mind others shooting if they have a place to shoot ! Ur obviously not part of the airgun community because we help eachother out ! U don’t know my situation….
Sure! Come on over!
@@alfonsedente9679 ?
hmmm so what if i chanbed a slug then cock it . place it on safe so the probe now goes ALL the way back will it change a round then? seem like it will chamber a round if cocked placed in safe then cocked again
correct me if im wrong
Once chambered and the safety is on no it will not load another slug until the trigger is pulled to fire or, if you decock the trigger with a round chambered the rifle thinks you pulled the trigger and they yes you could load a second round into the barrel
That seems a lot lighter than my s-45
I thought my s45 was semi auto
Am I wrong?
I just got it and haven’t been anywhere I can play with it
The s45 is semi-auto correct
That’s nice though
How much
Only aluminum tank in front of
AND $$$$$$$$???
Wow expensive!
I like everything about this excepthat's putting the gauge where you have to look down.The barrel which is outdated and does not make sense at all. No one wants to stare down the barrel to see how much air is in the tank
This is just a option, as the factory setup the only way the front tank can be filled is with the rear installed. Options is all it is
I'm not willing to pay what it calls for these a e a guns for all the problems that they have.
I am sure it leaks just like everything AEA Bin Tac makes . Wasted money is how I see AEA and the WORST attitude ever from a supplier. Bin uses his customers to prototype junk . This is a Chinese company that acts that way.
Out of many I've bought only one leaked and Bin Tac replaced the part for free (it was a faulty regulator) with no questions asked. I completely disagree with your assessment of BinTac customer service.
Block these losers Pete! They don't even own AEA OR BINTAC guns and they are running their mouths based on BS and what some toxic person said to them! Get them out of these groups and videos they don't deserve a platform to speak their BS from!!!
Sometimes you have good luck, other times you have bad luck, I know a lot of people and myself have had good luck but other people like you've experienced, have had bad luck, it's a good product, but like all things some people tend to get lemons, I will agree though that it seems more 50/50 with these products and sometimes you've got to Tinker it yourself to make it work.
@@BluegrassBigBoreairguns
@@jdp5704 I have had the same good experience with Bin Tac. Wonder how many of these guys with a "bad experience" have gone into it with a poor attitude that precipitated the bad experience?
After purchasing 30cal HP I’ll never buy another AEA product again. My magazine had issues couldn’t find a single mag for over two years. I gave up on it and tossed it. Waste of money. Buy a real gun.
THANKS FOR YOUR DEMONSTRATION.. THIS PROVES TO ME I MADE THE APPROPRIATE DECISION TO PURCHASE THE EDGUN LESHIY 2. THE AEA IS MORE AFFORDABLE YET A WASTE OF MONEY. THAT THING JUST SOUNDS SUPER LOW QUALITY....