Nerf Rapidstrike Lipo Mod Guide
HTML-код
- Опубликовано: 4 авг 2024
- Today on American Foam, I show you how to give your rapidstrike a huge boost in power and an insane rate of fire!
Bobololo’s LiPo guide (must watch):
• The Magic Nerf LiPo Fo...
Captain Xavier’s Live Center Rapidstrike Circuit video:
• Monday Mod Tips - Rapi...
Torukmakto’s Rapidstrike diagrams post (must read):
torukmakto4.blogspot.com/2015/...
Parts list:
www.containmentcrew.com/shop/...
www.containmentcrew.com/shop/...
www.containmentcrew.com/shop/...
www.containmentcrew.com/shop/... 
Развлечения
![FASTEST NERF GUN!!! [TRIPLE RAPIDSTRIKE STAMPEDE w/ ROUGHCUT INTEGRATION]](/img/1.gif)
"One Mag, One Tag" I love that line! The paint job is killer!
Thanks!
@@AmericanFoam can you link the battery you used for the gun with a charger?
@@AmericanFoam and can you link the full video without the edited out soldering part?
@American Foam My cousin gave me a broken rapidstrike and I tried to fix it. When I press the rev trigger it does either nothing or gives a very weak amount of power to the motors. However when I press the pusher trigger, the motors power up to normal speed. My pushrod works normally. Can you help me with this?
“I don’t care if it’s practical or not”
Best line ever
One mag one tag!
@@wds_004 Ine six rounder. Instantly evaporated into a shotgun burst.
*one six rounder
Thanks for making this mod/video. There haven't been mod guides for a rather long time, it seems. Good work!
Yeah, I really want to mod this rapid strike I found at GoodWill, and since it didn’t work, I wanted to mod one. Most of the mods were outdated.
Awesome video. This video makes you the Bob Ross of foam blaster modding. This was probably the most relaxing mod video I have ever seen.
I’ve modded a ton of Rapidstrikes and apparently they have all been via live center. Thanks for the post. The linked article was awesome as well. I will most certainly be putting a push button on my next build so that I can toggle between live center and dead center. Thanks again!
This is a sick mod video! Thanks for all of the work involved in making this. And, side note, you should absolutely do a cosmetic mod guide because you did an amazing job externally, too.
I just modded my first Rapid strike. This video was so easy to follow and you explained things so well. I’m very pleased with my end result. Thanks for the help!
Loved it. Brought back so many memories. My first two mods ever were rapid strikes. I used fang revamped motors on 2s and achieved an average of 140 fps. I also used a switch plate and agree it makes the job so much more simpler and easier. The paint job looks fantastic. If you want it to pop a little more the same scheme using metalic automotive paint realy makes it shine.
I bought this kit last year but did a few semi auto fly wheel mods to get experience. Today I finally built it and wow. That switch plate made this possible for me. my soldering is not the best Thanks for this video.
The plate helps a TON. I never really cared to try it the old fashioned way myself. Glad the mod came together well for you.
Great video!
My soldering kit is on it's way soon. These videos are a fantastic guide for folks like myself. Keep on truckin'!
Thanks for sharing this! I am getting ready to try my first Rapidstrike mod as a gift for my wife to be. This is a big help! Pease keep up the great work and thanks for all you do!!!
Awesome guide and a super awesome blaster. I really love the paint scheme.
I love the Stampede and always thought of the Rapidstrike as the Elite version even though they work completely different internally. So seeing the yellow Rapidstrike is really cool to me.
Solid Mod video, Nice work!
Awesome video and great audio quality! I'll be modding along shortly. Thank you!
Thanks much for this guide! I built one using your video, step by step. Great stuff. I had to do a little extra dremel work on the shell to get it to fit together properly, but the blaster runs like a champ. I'll probably be making a few more - not too terribly difficult.
Here's the finished product :) ruclips.net/video/t4YniSibqTM/видео.html
Thank you so much for doing this guide video. This is an absolute life saver.
Without this guide I would have been totally lost in here, I suck at electronics. Your guide made my modded rapidstrike possible.
This was a huge learning experience for me too. Yours came out totally awesome by the way. Glad I can help.
@@AmericanFoam tysm! 😁
Thank you!
I just started modding nerf blasters and modded my stryfe
I recently bought a new rapidstrike and changed the battery to a 3s (it doesn't burn the motors) and I thought that it would work but it didn't (The darts were coming out of the blaster as if an old man was pissing and had prostrate problems)
So I made a similar kit. Now it shoots a little slower than yours but does the job( I have a 20C 3s)
Printed the trigger part, flywheel cage and flywheels, got the motors from an friend of mine who is an electronics shop owner.
The most rapid and strikey nerf mod ever
Btw love the new intro
Not a modder but happy to see a new video :)
Nothing like a classic rapidstrike mod
That rappidstrike is beautiful i need to commission someone for one thanks for the amazing vid
burgundy on smokey 22 rnd mags is a great combo :)
also 2s pusher with 3s wheel motors seems like a peculiar choice but it seems to work well so kudos
Love the paint job.
the new intro is great!
Thanks!
Dude.! I'm already a subscriber.
Awesome video!
This blaster is lots of fun!
This video was very helpful thanks
I love the Rapidstrike!
I was wondering about the switch mounting plate, I have plans for an integration with a pair of rapidstrikes but using half a hyperfire for the back half, would that mounting plate sit well inside the shell of a hyperfire or does it only fit inside a rapidstrike?
Thrifting is great but let’s not force American foam to travel that much.
My wiring just broke, this replacement and upgrade is beautiful.
Awesome video
Thank you very comprehensive.
Keep up the good work
Any recommendations for the best 3S Lipo battery? Going to be doing this mod with my son this weekend! Love the video!
what lipo should I use and what charger for that lipo should I use
Nice vid cool camo! You should do a ultra select next.
I would love to see more reviews and giveaways maybe some thrifting too
Thanks for the guide
Sure thing. Hope it was helpful. It was one of my more involved mods for sure.
What battery did you actually use? For example Turnigy 2200mAh 3S 25C Lipo Pack and importantly do all Lipos fit?
I followed your links in your description to get these upgrade parts unfortunately CC Cyclone High Performance Flywheels Are currently unavailable what would be your next best suggestion for flywheels to work with this mod kit?
I want this kit but retain the original rev and fire trigger. Do you think they could be adapted to fit?
I cant wait for the full auto stryfe mod guide!!!
Soon:)
Also when you film it, could you please show us how to put motor breaking on the flywheels and pusher motors, as i really want to do that on my mod but i dont know how!
Also if you can can you show us how to wire a PWM?
What battery are you using? Why did you use the kraken 3s motors for the fly wheel but meishel 2s motor for the pusher? Is your battery 2s or 3s?
For the automatic gearbox, can I use a 180 sized motor, or will I have to cut into the outside shell?
hey! thinking of a metal cage, what cage crush did you use?
Love you my guy
Great mod! Which Lipo did you use?
Shell strike. Maybe brass a single shell or do some shell testing with the AF half darts.
earned my like and sub
Can you help me ?! I followed the video and as soon as I plug in a battery the motors start up and I can’t figure out the cause or why my rev trigger dosent work .
Can I have the link to the specific xt60 connected that you used?
RUclips lied to me!!! They said you uploaded this 46 minutes ago, I might follow this guide though
Did you do it? And if so, how did it go?
@@cdubb155 nah, I don’t have the money for parts
I'm finally getting into modded and I plan for the rapidstrike to be one of my first major mods. I was also wondering what fps is this mod able to achieve?
helping with the algorithm
Which battery do you recommend?
Hi everyone, did someone have the information about the battery we can use with this new settings?
quick question, does the polarity on the push motor matter?
As long as it’s pushing, no.
Was that rebel mech drum a hint towards the next mod? lol
Can you make a video that explains how to do this mod without the Switch plate?
Could you try the snapfire
Does anyone else have an issue with it being insanely loud and the flywheels falling off and the screws coming out? Is it better to use it on 2s?
Amazing :)
What if the flywheel motors don't spin in the correct orientation? How would the wiring change to get the spinning correctly.
Polarity! Inverse the + and the -, and the motor will spin reverse
What battery did you use ?
What lipo did you use?
Would love to see a paint tutorial video!
Yess plz make a painting tutorial😁
7:53 so as long as the pins don't snap off, them being bent is ok, right?
What if I don’t have all these things but I still wanna mod my blaster?
I accidentally stripped the screw for the front sight but I don’t have an electric drill or flat rubber bands. Anyone can help?
How does this guy spray paint then take apart?
Would this work with a stratohawk? I only have a stratohawk and not a rapidstrike.I have heard that the stratohawk is just a repaint of the rapidstrike so I was just wondering.
Yes. They’re exactly the same on the inside.
@@AmericanFoam Thankyou!
Yes u should make a painting tutorial
awesome! could you possibly do a hyperfine mod guide
Need a hyperfire first. They’re not too hard though.
Please mod the dart zone ball blaster and show how we can fix hop up
Sweet!
can you mod a rhino fire. thanks
Why didn’t you go with the Kelly Industries PCB? Has he stopped making them?
...and loved the video!
Would this mod work on the Elite 2.0 Turbine, since it it the same as the rapidstrike?
I assume the principles are similar but I can’t say for sure unless I had a turbine to open up and verify.
@@AmericanFoam alright, i watched a video review of the turbine and the battery tray isn’t the same so idk of the wiring would work. Reason i was asking is bc i have a rlly old rapidstrike that jams and a new one is like $150 (USD) and I’m kinda broke rn lol
what battery
Can you make a video of a TITAN CS-50 mod
What battery did you use for the mod?
I was also wondering this, although I assume any 3s Lipo would do
Hey buddy can you help me? I have a rapidstrike cs-18. I have a 25c series 1000mah 3s batteries. I'm getting a kraken 3s 130 motor and rapidstrike overhaul pack. The flywheels that is in your description is out of stock. Can I get another kind of flywheels for the set up? If so, canyon you send me the link please, thank you.
Give the Daybreak wheels a shot. I like them in some of my newer builds.
outofdarts.com/collections/flywheels-cages/products/daybreak-flywheels-pair
@@AmericanFoam Hey buddy, those flywheels are too big for the cage. Do you have any other recommendations?
How difficult is it to tap the trigger and only shoot one dart at a time with this build?
This type of build is really meant to be a dart hose. With a quick tap your lucky if you only get 2. Usually 3-4 darts per burst.
What battery did you use for this setup?
Turnigy nanotech 1300mah 45-90c
Another long form mod video. Like these? Be sure to hit that like button! This thing is has a dumb rate of fire and hits hard. What do you guys want to see next??? Firing demo at 00:37:35
Can i buy this from you
HyperFire 3s brushless
You where talking about nerf wars and what not but are those actual scheduled events? Like put on by organizations
Basically yes. We have a smallish club in NE Ohio that (during non pandemic times) hosts monthly wars with various game types. Scale up all the way to an Endwar type event with 800 players and that’s a whole other level of crazy.
Nice and do you think thrift shopping is a good way to get cheap blasters for beginners
is it possible to run a rapidstrike on a 2s motor and lipo instead?
Totally. Two Fang Revamped motors for the flywheels and a Meishel 2.0 for the pusher would be great combo.
@@AmericanFoam hell yeah!
why does this video show the positive terminals opposite of each other but other videos say they go on the same side
3s stryfe or full auto kit
What motor spacing is used for this specific mod?
42
@@AmericanFoam Thanks for clarification :)
What would cause the blaster to not stop after one trigger pull?
Sounds like a case of runaway. The pusher sometimes continues to cycle if it’s not wired correctly OR the switches aren’t setup exactly right as far as placement into the blaster is concerned. Rapidstrikes can be a little finicky sometimes. The r/nerf subreddit has more in-depth posts on the topic I believe if you need help with yours.
@@AmericanFoam Thank you so much! I got that fixed but it seems that I need to make more mods to the case to get it to go back together. Was that true for you also? Also, the trigger pull seems awfully short. Did you have the same experience?
Can I use my own 16 gauge wires for this ?
Should be fine.
Freakin nailbiter.clip removal mod spring upgrade brass Clip "Barrels". Cool Paintjob.
Honey badger is not better and faster than meishel 2.0 as a pusher?
Can I Do This With My Stratohawk?
Yes. They’re the same blaster inside.
i'm 100% serius could I buy this?
No joke I might do that