Thank you. Been trying to figure out hubby's 2015 glk250 forever. The only glitch we had was from the garage door system. No red button. Just a program button. Pressed it. Did the rest of the steps with no problem!! Hubby is happy!
After attempting to figure it out with the manual for an hour yesterday we were unable to figure out how to program my inlaws new car. This video makes it so easy, and we soon realized what we were doing wrong. Thanks for posting!!
My MB is C250-2013 and my garage opener model is Genie power max 1500. in the first step didn’t work but I learned to garage opener devices and in the second step it worked perfectly.Thank you so much.🙏🏼😉
Excellent! Much easier to follow than the Mercedes manual. The only thing I would add is make sure that your car is either on or that you do not depress the brake pedal (engine will not start) than push the engine start/stop button two times. It took me all of two minutes to do with this video after I spent 30 minutes with the manual. Our garage door openers have a rolling code so a little more involved. Thank you very much.
I live in an apartment complex with a parking garage underneath the building. It has a giant tilting door & no 'learning' button anywhere so I didn't think it would work. But out of curiosity, I (cleared old codes first) and followed all the steps except the 'learning' part on the opener, hey presto! To my surprise it actually worked! Now I can take the bulky door remote off the key ring!!
Easy to follow instructions- I needed one extra step (below)- for my Linear garage door opener. Worked like a charm (2015 MB GLK 250 Bluetec). After holding buttons #1 & #3 simultaneously to get the green light I did have to push by desired button on the rearview mirror TWICE to get the orange light )pushing once seemed to get me nothing and the orange light simply went off). I was then able to press/hold the corresponding button on my old garage door remote to acquire the green light on my rearview mirror.
For anyone with a 2011 GLE 350 follow this same sequence. 1. Hold buttons 1 and 3 up to 30 seconds or until rapid flashing. 2. Press and hold garage opener and whatever button you wish you program until the rapid orange lights are blinking steady. 3. Press programmed button and it will open your garage. 4. Confirm the newly programmed button will open and close your garage door. The lights never turn green and will stay orange.
2004 E class and lift master garage. Here’s what worked for me. 1. Hold left and right buttons down until yellow light flashes fast (no green or red light on mine. 2. Hold down desired button and the opener button on your remote until slow yellow flash turns to fast yellow flash. 3. Go and press the learning button on the garage door motor 4. Go back to car and hold down the desired button until garage door light flashes once. 5. Let go of desired button, press and hold it to verify it works. I have to hold down for about a half second for garage door to go.
Yesterday I spend almost two hours trying to program my new M-B using the owners manual and ultimately walked away exasperated. The manual is completely wrong (Stephan, please tell your boss!). This morning I found this excellent video, watched it and then programed it in less than 3 minutes. Happy now!
After reading the book and 20 minutes of frustration, I watched this video and unless time than it took to watch the video I had my opener programmed. thank you!
I tried repeatedly for over an hour last weekend with no success. Walked away swearing and frustrated. Today found this video and got not just one but both garage doors programmed in under 5 min. Thank you Stephan!! I wonder if they write it wrong in the owners manual so they have reason to charge their customers to send a concierge out to the house. Hmmmmmmm?
The procedure described in the video needed a few modifications to work for me on my 2015 ML320. I have a non rolling code garage opener, so the first part of the video is what is relevant. The car engine must be running for the programming to work. The first step of holding the two outer buttons for 30 seconds to get the light to turn green worked just fine. But in the second step, to get the desired button ready to program, I had to press the button *while* the light remained green. In the video, Stefan presses the desired button after the green light turns off. Also, I had to press down this desired button for 2 seconds multiple times before it started flashing yellow. After that, the final step of holding the garage remote close to it and pressing down for 5 seconds programmed it correctly.
For rolling code like mine, take out the smart button from your ignition if you have one, and use a regular key to put the car into ignition (click position 2). Clear the codes as this video mentioned with two fingers if you need to. Leave your car door open. You will need to move quickly. Get a ladder and disengage your garage door. Go up to the mechanical unit and press the learn button. Go back you your car and press the button you want for a second or so, on and off, until you hear that it opened the garage. It took me about four presses.
Hey man i have tried everything but it seems it doesn’t want to work on my 2014 w166 because it just doesn’t register my key when i hold the button but instead the light keeps flashing until i press it again to cancel. Is the issue with my door opener? Would really appreciate any help thank you
Paul, the coding is saved until erased. I am not sure if your rolling code garage door motor does something strange. Unfortunately we could not test all openers/MB models.
I have a 2006 S350. I have followed the instructions of this video and comment instructions from others. I've pressed the two other buttons to clear the memory, as well as, pressing all three buttons. None of the lights after clearing of any color remain on solid or flashing. I am at a loss. Any suggestions. Thank you.
I have a 2005 s 500 and the manual says it flashes rapidly not turn green . will try with this video think need the button on the motor housing trick ?
Sehr vielen Dank, Stefan! Zis vas very gut und helpvoll! I vatched about zerty times und finally, ze penny drropped und I managed to do zwei buttons - frrom outzide gate to inside garage door opener. I laff my Mercedes-Benz und I laff you, Stefan!
I’m trying to set it up for two hours already and video doesn’t help. The green light said that everything is complete, but when I push the buttons on the mirror garage door not opening
Thanks for the instructions on how program my my Mercedes to open up my garage door. I n was thinking that someone could break into my car and steal it and follow me home and brake into my garage
I was used my garage door opener , now not work ,i try to reset by manual book , I hold the signal transmitter button , but indicator lamp not on what can i do ?
Hi, I have just bought 2006 MB R350, i am trying get set car garage opener Craftsman 1/2 H.P brand. i am trying to do the same as told in above video. But i am still unable to programe my car. Can someone Please write it down sept by step to programe this. it will be really appreciated.
question i have program the garage door successfully but having hard time with pairing with the main gate help please !!!!!!!!!!!!!!!!!!!!!!! thank you sooooooo much
2014 C350 and Overhead Garage opener (2013 model with rolling code). I have followed the steps in this video and the others on RUclips. We are still unable to get it to work. We have spent no less than 10 hours over the last 2 years trying to get it to work. Neighbors even came over and no one can figure it out. It has to be the garage door opener that is the problem, but the last car I had paired fine (2010 Nissan 370Z). Anyone have any thoughts? I only have another year on the lease but at this point it's more about conquering the as yet unachievable task. I can't stand that we can't figure it out. Mercedes support was no help either. They had me perform the same steps as this video and even pointed me to one of these videos!!
Your first step says to hold the 2 buttons to start the programming process. Your next step says to skip the first step if you’ve programmed another remote to the vehicle. You should write down with pencil and paper and read several times before doing the video, and perform in the order you’re dictating, before doing the video.
Guys this does help but when it comes to the training light don't press for 30 seconds that deletes all remote controllers all ready connected only press and then It will work I have liftmaster
The two button procedure int he beginning is only required if you have never programmed the mirror remote. It basically clears the programming and gets the remote ready to receive programming. If you already programmed the remote to another garage door opener, hold the button you want to program (and that does not already have a code) and wait until it turns/blinks green. The rest is the process as described.
after resetting (holding both ends) click AND HOLD the button you want to program while simultaneously pressing the gate/garage door opener. It should quickly flash orange/red. Signaling the pairing was successful. Just test it then. Mine never showed green as well.
I watch 5 videos on how to do this and your video was the only one that worked. Excellent step-by-step instructions. Thank you!
Simple and straight to the point, without any unnecessary nonsense. Worked like a charm. Thank you!
Thank you. Been trying to figure out hubby's 2015 glk250 forever. The only glitch we had was from the garage door system. No red button. Just a program button. Pressed it. Did the rest of the steps with no problem!! Hubby is happy!
Ya
After attempting to figure it out with the manual for an hour yesterday we were unable to figure out how to program my inlaws new car. This video makes it so easy, and we soon realized what we were doing wrong. Thanks for posting!!
My MB is C250-2013 and my garage opener model is Genie power max 1500.
in the first step didn’t work but I learned to garage opener devices and in the second step it worked perfectly.Thank you so much.🙏🏼😉
Simple and Easy instructions by Mercedes. The Rolling Code Device took two easy steps and I prefer the safety aspect it provides.
Excellent! Much easier to follow than the Mercedes manual. The only thing I would add is make sure that your car is either on or that you do not depress the brake pedal (engine will not start) than push the engine start/stop button two times.
It took me all of two minutes to do with this video after I spent 30 minutes with the manual. Our garage door openers have a rolling code so a little more involved.
Thank you very much.
Everyone should use this video. The other videos AND instruction manual didn't help, but yours did! Thanks!!
Your video is very easy to understand. It worked with just one attempt. Thank you!
Works perfectly for a 2013 ml350 with rolling code garage door opener.
This is the only video that worked!
I live in an apartment complex with a parking garage underneath the building. It has a giant tilting door & no 'learning' button anywhere so I didn't think it would work. But out of curiosity, I (cleared old codes first) and followed all the steps except the 'learning' part on the opener, hey presto! To my surprise it actually worked! Now I can take the bulky door remote off the key ring!!
The rolling code step is what i needed, thanks for the simple and effective instruction ❤️
Easy to follow instructions- I needed one extra step (below)- for my Linear garage door opener. Worked like a charm (2015 MB GLK 250 Bluetec).
After holding buttons #1 & #3 simultaneously to get the green light I did have to push by desired button on the rearview mirror TWICE to get the orange light )pushing once seemed to get me nothing and the orange light simply went off). I was then able to press/hold the corresponding button on my old garage door remote to acquire the green light on my rearview mirror.
New C300 class. Hated the instruction manual, much love for this video. Really appreciated. Have an uptick.
Yay. Three videos later and finally found the one with correct directions! Thank you!
Thank you… it’s been years that I’ve been trying to figure this out and I’m embarrassed that it was so easy…☺️
Thank you so much! I watched a dozen other videos with no luck. You made it very easy and made my day :) I have a GLE350 2018.
S. M.
Ok my husband was able to do it by pressing all three buttons to clear it... And the rest as described in this video, and it worked!
Lisa Y my problem exactly thanks for the tip!
Thank you. I was missing one step and spent 2 hours before I saw this video. Programmed it in 2 minutes afterwards!
Thank you Stefan. The manual is wrong and you are right. And now it all works splendidly.
Worked absolutely perfect for my G 63AMG, just as instructed. Excellent instructional.
For anyone with a 2011 GLE 350 follow this same sequence.
1. Hold buttons 1 and 3 up to 30 seconds or until rapid flashing.
2. Press and hold garage opener and whatever button you wish you program until the rapid orange lights are blinking steady.
3. Press programmed button and it will open your garage.
4. Confirm the newly programmed button will open and close your garage door.
The lights never turn green and will stay orange.
Z😊😊
Jddbbdjdjdjdjdjdjdjdjdjdjdjl
Apparently I had a rolling code, but just as a follow the procedure carefully it does work..thank you Stephan, and your team
Thank you Carousel Motors! This was a great video and instructions were easy to follow!
I looked through a few videos and this one is the best and most helpful. Thank you!
Thank you Stephan! Perfect video, after trying using the MB video and not working multiple times, I found yours and it worked perfectly.
2004 E class and lift master garage. Here’s what worked for me.
1. Hold left and right buttons down until yellow light flashes fast (no green or red light on mine.
2. Hold down desired button and the opener button on your remote until slow yellow flash turns to fast yellow flash.
3. Go and press the learning button on the garage door motor
4. Go back to car and hold down the desired button until garage door light flashes once.
5. Let go of desired button, press and hold it to verify it works. I have to hold down for about a half second for garage door to go.
Great video, read the manual for 2 hours, this took me 5 minutes and I have a rolling code opener. Would have been 5 seconds without
great video. certainly less confusing than the manual. got mine set up in 3 mins
Yesterday I spend almost two hours trying to program my new M-B using the owners manual and ultimately walked away exasperated. The manual is completely wrong (Stephan, please tell your boss!). This morning I found this excellent video, watched it and then programed it in less than 3 minutes. Happy now!
After reading the book and 20 minutes of frustration, I watched this video and unless time than it took to watch the video I had my opener programmed. thank you!
Worked with my Pops S550! Thanks guys
Thankful for this video, as the 5-6 other videos I watched on RUclips were completely useless 🤣
Great video!!! I was able to follow the step-by-step instructions and successfully programmed my vehicle. Thank you!!!
Worked great for my G wagon, thank you!
You have a g wagon? Lucky...
I bought my Benz a year ago. Only was able to program the garage door opener today by looking at this video for a few minutes.
Light sequences did not match my 08 CLK, but I got the general idea and got it done. Thanks.
Thank you! It’s very clear instruction, it’s kinda old video but still works with my new Benz!!!
Was able to program easily after watching this video, thanks for posting. Wish I would have started here.
Very much appreciated! 🙏🏿💯
I tried repeatedly for over an hour last weekend with no success. Walked away swearing and frustrated. Today found this video and got not just one but both garage doors programmed in under 5 min. Thank you Stephan!! I wonder if they write it wrong in the owners manual so they have reason to charge their customers to send a concierge out to the house. Hmmmmmmm?
mine just starts flashing yellow and when i press it down is just turns off and the light doesn’t stay on
This should help; I had the same problem mine doesn't turn green just flashes yellow: I have a 2000 clk 430 ruclips.net/video/FojVkloJakc/видео.html
Mines 2!
Same here, still can’t figure it out…
Mine flashes pure red lol
Mine too and i cant find why. You guys find something?
The procedure described in the video needed a few modifications to work for me on my 2015 ML320. I have a non rolling code garage opener, so the first part of the video is what is relevant. The car engine must be running for the programming to work.
The first step of holding the two outer buttons for 30 seconds to get the light to turn green worked just fine. But in the second step, to get the desired button ready to program, I had to press the button *while* the light remained green. In the video, Stefan presses the desired button after the green light turns off. Also, I had to press down this desired button for 2 seconds multiple times before it started flashing yellow. After that, the final step of holding the garage remote close to it and pressing down for 5 seconds programmed it correctly.
Great video ! Just solved my programming snafu. Thnx
For rolling code like mine, take out the smart button from your ignition if you have one, and use a regular key to put the car into ignition (click position 2). Clear the codes as this video mentioned with two fingers if you need to. Leave your car door open. You will need to move quickly. Get a ladder and disengage your garage door. Go up to the mechanical unit and press the learn button. Go back you your car and press the button you want for a second or so, on and off, until you hear that it opened the garage. It took me about four presses.
Super helpful. Worked for my 2013 Mercedes S550
Thank you!!!!! This worked after the instructions in the manual did not!
25 minutes with the manual = fail
2 mins with this video = success
Patrick Burke yes, yes and yes, I second that! This video is awesome!
Patrick Burke I third that!!!!!!!!!
Ture
Yes Excellent video. The Manual is so confusing.
Excellent... Worked like a charm. THANK YOU
Hey man i have tried everything but it seems it doesn’t want to work on my 2014 w166 because it just doesn’t register my key when i hold the button but instead the light keeps flashing until i press it again to cancel. Is the issue with my door opener? Would really appreciate any help thank you
worked well for my GLK! thank you :)
I know it's pretty off topic but do anybody know of a good place to stream newly released movies online?
Better than Mercedez own video :)
Stephan rocks. So do my 11 and 12 year olds who helped me to do this. Ok, actually, they did it for me, but it got done either way!!
Thanks for the video.. Now the problem i have is it does not work all the time.. Do I need to add a battery
in the rear view view mirror? 13 S550
Paul, the coding is saved until erased. I am not sure if your rolling code garage door motor does something strange. Unfortunately we could not test all openers/MB models.
I have a 2006 S350. I have followed the instructions of this video and comment instructions from others. I've pressed the two other buttons to clear the memory, as well as, pressing all three buttons. None of the lights after clearing of any color remain on solid or flashing. I am at a loss. Any suggestions. Thank you.
Thank you. Purrfect!
worked great on c250 2013 first try, good video
worked with my GL550 and liftmaster, thanks!
Worked for my 2018 C63 AMG S
Thank you so much. For others reference worked on a MY 2016 E350 NA W212
I have a 2005 s 500 and the manual says it flashes rapidly not turn green . will try with this video think need the button on the motor housing trick ?
Very helpful, thanks
It worked! Thank you, it was very easy.
thanks very much for this super helpful video!
Thank you worked perfectly!
Sehr vielen Dank, Stefan! Zis vas very gut und helpvoll! I vatched about zerty times und finally, ze penny drropped und I managed to do zwei buttons - frrom outzide gate to inside garage door opener. I laff my Mercedes-Benz und I laff you, Stefan!
It works 🎉 thank you
Thank you Stefan.
Thank you for the video! The MB manual is not very useful.
i do have a 2008 GL550 i having trouble operating to open my garage door please.
Thank you ! Easy as 1,2,3 !
I’m trying to set it up for two hours already and video doesn’t help. The green light said that everything is complete, but when I push the buttons on the mirror garage door not opening
Thanks for the instructions on how program my my Mercedes to open up my garage door. I n was thinking that someone could break into my car and steal it and follow me home and brake into my garage
Thanks, this worked for me!
thank you just got a class 550 and I programed it with no problen
My problem is that when I program the 5th car, the 1st car will stop working and forget the programming. Also, other handheld remotes stop working.
Worked great.
I was used my garage door opener , now not work ,i try to reset by manual book , I hold the signal transmitter button , but indicator lamp not on what can i do ?
I press the outter both buttons at same time , after 30 seconds it flashes red , why?
Tysm, this worked!
Thank you excellent
Thanks! It worked.
Thank you!😅
Instead of mine flashing yellow when trying to program it is solid red. I have already reset everything
Light want turn green in my 08 e350
Thanks! Excellent
What is the middle button for??
Very good video.
Visual display is superior to reading instructions!
Hi, I have just bought 2006 MB R350, i am trying get set car garage opener
Craftsman 1/2 H.P brand. i am trying to do the same as told in above video. But i am still unable to programe my car. Can someone Please write it down sept by step to programe this. it will be really appreciated.
Tariq Mahmood Tariq, did you ever figure it out? I haven't been able to get my '02 MB and Craftsman 1/2 to sync either.
H
Worked on first try
question i have program the garage door successfully but having hard time with pairing with the main gate help please !!!!!!!!!!!!!!!!!!!!!!! thank you sooooooo much
2014 C350 and Overhead Garage opener (2013 model with rolling code). I have followed the steps in this video and the others on RUclips. We are still unable to get it to work. We have spent no less than 10 hours over the last 2 years trying to get it to work. Neighbors even came over and no one can figure it out. It has to be the garage door opener that is the problem, but the last car I had paired fine (2010 Nissan 370Z). Anyone have any thoughts? I only have another year on the lease but at this point it's more about conquering the as yet unachievable task. I can't stand that we can't figure it out. Mercedes support was no help either. They had me perform the same steps as this video and even pointed me to one of these videos!!
n
Your first step says to hold the 2 buttons to start the programming process. Your next step says to skip the first step if you’ve programmed another remote to the vehicle.
You should write down with pencil and paper and read several times before doing the video, and perform in the order you’re dictating, before doing the video.
Thank You good explanation ❤️
Tried to program it but my lamps never chamged the colors
Well done
Guys this does help but when it comes to the training light don't press for 30 seconds that deletes all remote controllers all ready connected only press and then It will work I have liftmaster
Sukhmanpreet Singh I wish I had read this first!!! Ugh, I deleted all my remotes. :( Thanks, though!!!
The two button procedure int he beginning is only required if you have never programmed the mirror remote. It basically clears the programming and gets the remote ready to receive programming. If you already programmed the remote to another garage door opener, hold the button you want to program (and that does not already have a code) and wait until it turns/blinks green. The rest is the process as described.
It’s the most difficult thing. Still mine just flashes and never turns green
after resetting (holding both ends) click AND HOLD the button you want to program while simultaneously pressing the gate/garage door opener. It should quickly flash orange/red. Signaling the pairing was successful. Just test it then. Mine never showed green as well.
Success ! Thanks !
Unfortunately when I clear it by pressing the two outside buttons it never turns green, in is orange for 30 seconds then begins to flash orange. :-(
LIsa Ybarra I have the same problem :(
My husband figured it out! He cleared by pressing all three buttons at once and then programmed it with our remote opener and voila it worked!
Use this: ruclips.net/video/_rxQoXh9xCE/видео.html