Yea that suspension has 0 sag. far far far too stiff of springs. it should sag down a solid third of its suspension travel under its own weight. otherwise its not really doing anything.
Was thinking the same thing. Or otherwise create a much more heavy body to add weight to allow the springs to carry the weight and lower the take off speed
@@anthonywilliams852 this is like a $2,000 kit, you can start with a regular electric crawler, actually have a lot better performance for less than $500. This is expensive because it has a 4-stroke engine and is kinda niche
Great Build as Always, JohnnyQ90. you are very skilled at what you: Design, Create, Build, Demonstrate, Educate & Entertain. thank you for sharing your craft with us (your audience) & creating these videos to upload. I have never thanked you before, so I want you to know how inspiring you are to many of us here. Thank You.
Man that's one sweet kit. Love the exhaust. I'm not done watching yet, but can't wait to see it run. I'd love to get this. I knew it wouldn't be long until they built an entire car. Brilliant. Also love the 3 piece wheels and bolt cover for the rims, to keep the sand/mud out. Very cool
That's so cool man, love that it has working lights, the electric start, reverse, and how you fuel it up. Freakin awesome. I'd love to see the top speed and hear the gear change. Is it automatic or can you change the gears
these kind of engine are the future of gas rc! i thought the nitro engine scene was falling apart! THANK YOU! I LOVE NITRO and i love lipo but i only use lipo if i dont feel like tuning or am feeling lazy asf....lipo to me is the lazy mans go to
Seems to be lacking a low speed crawling ability? Super awesome for sure, hopefully a low range transfer case, or a super low first gear can help with the low speed control because that would be super fun then.
Wow! even on lowest gear that's the fastest crawler I've yet to see. Needs approx 10:1 gear reduction considering it still has 2 "faster" gears to switch to.
Hey i had a question, i have a quite old nitrous engine but when I start it it instantly got to max power and cannot slow down… Can you help me solve that problem? I can’t seem to find it…
Soooo brought me back to the 80 s with tamaya or how ever it was spelled. Look at the other selection !!! Yeah I’m digging the construction rc stuff. That looks fun !!!!!
A nice model, where do you get so much empty bench from ? I started with one bench in my kitchen but that stopped me cooking so i bought a 8x8 foot shed and built a 8 foot bench but that soon filled up even with a bench all the way around the sides which filled up quicker than the first bench so i bought a second shed but a foot taller so i had some storage in the roof area and that was soon full so in the last part of my garden between the two sheds i had a purpose built roof front and back built which gave me almost the same area as the two sheds i have put up racking along one wall which i am moving my rc cars and construction machines in to the racking is around half full but once i bring the rest on my construction models in i think i will end up with one bench with enough space to to build on, i have been here for 11 years and now think i have a fairly decent set up so i now will have to think of my next project.
I just told my wife now I know what I want for Christmas if I win the lottery I love all them little motors I love your ability to machine and make stuff it's phenomenal especially your CNC skills and how you design your own stuff I was in a machine shop for 45 years and I'm totally amazed hey have a great day and thank you for your videos
A very nicely made kit! With this engine, it seems more suited as a offroad racer or rally car. For crawling it seems to need bigger wheels and less speed. But honestly, the noise would be too much for me, especially for crawling where I basically stand next to the car all the time.
I think the steering is a bit off, because the steering rod or how it’s called sits in front of the front axle,for better turning it schould be behind the front axle, like on every other car
Chinese manufactured products are not inherently worse quality, it just so happens that most Chinese products fill the market niche of extremely cheap products. Which, obviously, is going to be low quality, but not because it’s Chinese, but because it’s cheap. This is a $1800 product, if you imply that even with that budget, the Chinese can’t possibly be skilled enough or intelligent enough to manufacture an acceptable product, then that’s a you problem.
OH, it's so cool! This kit is awesome! I thought car will work poorly, but it's run so well! Feels some inertia of how engine gains RPM and clutch go on, that's cool. Thanks for this video, dude!
hey man i just now saw your video on the turn signal lenses you replaced. How are they holding up now? do you have a link or the brand of the filament you used? thanks!
Hey there, got a question, i have a 1/10 scale rc nitro car, and i have an bmw m3 e30 lexan bodie, and the bodie isn't sitting straight on the car, do you have any tips for how i can fix that?
Sounds like a motor cycle though. I figure there is not enough metal around it to propagate the noise? I noticed the same on my 1:24 electric monster truck. The plastic parts made it sound like a toy. Also bounces less like a toy with metal not only because of the oil shocks. My father always used to say that if your 1:24 monster truck can not amputate one's leg with its weight then it is not a monster truck (He did not say such a thing...).
On the gearbox bracket install, it doesn't look like the provided screw was too long, it just looks crossthreaded. You can see the same issue when the shorter screw was inserted.
Man, i love these videos so much, its a real inspiration to me and my son who loves building things. One request, please lower the volume on the CNC machining.
Awesome little truck! Perhaps it would crawl a little better on softer springs? It looks pretty bouncy
And lack of damping
i think they are just calling it a crawler not knowing what it really means
Yea that suspension has 0 sag. far far far too stiff of springs. it should sag down a solid third of its suspension travel under its own weight. otherwise its not really doing anything.
@@EllaBananas not just that look at the gearing, shit is a race car lol it suppose to crawl very very slow
Was thinking the same thing. Or otherwise create a much more heavy body to add weight to allow the springs to carry the weight and lower the take off speed
That's pretty cool. Not $1800.00 dollars cool, but still cool. The tires look like the ones on my old Wild Willy.
It's a awesome car. I love mine. Currently painting the body.
Hey I really want to get into this hobby. But I know NOTHING. What would you suggest as a starting point? Something where I don't need a pocket cnc.
@@anthonywilliams852 I suggest winning the lottery. lol
@@anthonywilliams852 this is like a $2,000 kit, you can start with a regular electric crawler, actually have a lot better performance for less than $500. This is expensive because it has a 4-stroke engine and is kinda niche
@@anthonywilliams852 definitely go with a bigger brand and electric car. Axial has a bunch of models, the traxxas TRX crawler supposed to be good too.
Bang berapa banyak nya
Great Build as Always, JohnnyQ90. you are very skilled at what you: Design, Create, Build, Demonstrate, Educate & Entertain. thank you for sharing your craft with us (your audience) & creating these videos to upload. I have never thanked you before, so I want you to know how inspiring you are to many of us here. Thank You.
Hah, nice touch with the itty bitty bead-lock wheels. The frame is also a lot more realistic than I usually see on here.
That would be super cool with a much lower gear ratio! You have to do it 😊
Man that's one sweet kit. Love the exhaust. I'm not done watching yet, but can't wait to see it run. I'd love to get this. I knew it wouldn't be long until they built an entire car. Brilliant.
Also love the 3 piece wheels and bolt cover for the rims, to keep the sand/mud out. Very cool
We need real people to comment, I'm so sick of these scammers
Yeah those thirsty bots were getting out of control. Cool kit but damn the price is certainly for enthusiasts
Bead locks?
The diff lock mechanism is crazy!
That's so cool man, love that it has working lights, the electric start, reverse, and how you fuel it up. Freakin awesome. I'd love to see the top speed and hear the gear change. Is it automatic or can you change the gears
It was remote manual
It says in the title it is a manual
@@_Everyone__ that's freakin awesome.
@@jasonlin9805 damn, I must have missed that part. How cool is that. Makes me wonder if it's fast tho..
ข
A beautiful machine, congratulations!
Thank you Leandro, as always!
That's pretty sweet. Looks like the suspension isn't dialed very well for a crawler though.
I would say it’s more of a trail rig than a actual crawler
100 % trail truck and this running video is in freezing temperatures- shock fluid is thicker and operation is a little different
wouldnt call it a crawler when it has paddletires for sand and is called sand cruiser..
ตตขตขขตคิดขขตความ
@Alex เขตจตุจักรกทมจะ
It needs a snowplow on the front! Make winter fun for a little while.
Glad to see you back. Love your content
these kind of engine are the future of gas rc! i thought the nitro engine scene was falling apart! THANK YOU! I LOVE NITRO and i love lipo but i only use lipo if i dont feel like tuning or am feeling lazy asf....lipo to me is the lazy mans go to
Once Greta hears of these it will back to batteries.😅
They are noisy as heck. Dirty. Not as powerful. And more expensive.
Very cool! The rig could probably use for some softer springs, or maybe softer shock oil, but everything else is awesome!
Yeah it did look a little bouncy didn't it?
I see plenty of room for some upgrades. Awesome! Keep up the good work.
This is the most satisfying build
Can we see the inides of the transmission? That'd be really cool to see how they did that C:
@Lala stop
Go to the website in the description, they have pictures,. There's alot going on inside that trans
@@demetrijohnsonssirenvideos3590 A
@@minhnguyen781 A what?
@@demetrijohnsonssirenvideos3590 I just imagine he did this. ruclips.net/video/1Uzw1Zr1FE4/видео.html
I'm curious to see what kind of mods you come up for it.
14:40 - 14:42 IRL LAG confirmed!! lol anyway superb content i love it 😎👍
Seems to be lacking a low speed crawling ability?
Super awesome for sure, hopefully a low range transfer case, or a super low first gear can help with the low speed control because that would be super fun then.
Looks good brother! Great video 👍
WoW we're just 30 seconds into the video and already impressed just by the wooden box and high-end packaging
It’s $1700
@@parkerbrinker390
ouch! Well no wonder the buyer gets a wooden crate and high-end packaging lol
@@tymz-r-achangin yeah, because we all know how valuable 1/4" paneling and some brass hinges are... roflmao
thanks man, so glad to see you built it
Wow! even on lowest gear that's the fastest crawler I've yet to see. Needs approx 10:1 gear reduction considering it still has 2 "faster" gears to switch to.
I want you to make me a go kart size v8 engine if you could that would be awesome
I'm trying to make a go kart with a v8
I might a clutch
@@bittysno8723 you are basically begging here
I’ve spent MANY thousands on rcs glad I never wasted any of it building one of these however I understand a project of passion as much as anyone.
Add some weights to the body and chassis to give more inertia.
That will reduce bouncing and give better scale performance.
or just softer springs and some oil in the shocks!
Hey i had a question, i have a quite old nitrous engine but when I start it it instantly got to max power and cannot slow down… Can you help me solve that problem? I can’t seem to find it…
Looks way over sprung. Not really a fan o the wing either. Pretty cool though. What about a electric fuel cutoff?
you know you have an expensive hobby when you can buy the real thing for cheaper
Bài hit làm mưa làm gió một thời của chị Bảo Thy. Cám ơn Đức Phúc mang nó trở lại với màu sắc mới ❤❤❤❤️
That looks like it could handle being taken off some sweet jumps
These are so relaxing to watch and no music is perfect
Soooo brought me back to the 80 s with tamaya or how ever it was spelled. Look at the other selection !!! Yeah I’m digging the construction rc stuff. That looks fun !!!!!
A nice model, where do you get so much empty bench from ? I started with one bench in my kitchen but that stopped me cooking so i bought a 8x8 foot shed and built a 8 foot bench but that soon filled up even with a bench all the way around the sides which filled up quicker than the first bench so i bought a second shed but a foot taller so i had some storage in the roof area and that was soon full so in the last part of my garden between the two sheds i had a purpose built roof front and back built which gave me almost the same area as the two sheds i have put up racking along one wall which i am moving my rc cars and construction machines in to the racking is around half full but once i bring the rest on my construction models in i think i will end up with one bench with enough space to to build on, i have been here for 11 years and now think i have a fairly decent set up so i now will have to think of my next project.
Looks like it might be a bit difficult to crawl over things with it, It is cool though
I just told my wife now I know what I want for Christmas if I win the lottery I love all them little motors I love your ability to machine and make stuff it's phenomenal especially your CNC skills and how you design your own stuff I was in a machine shop for 45 years and I'm totally amazed hey have a great day and thank you for your videos
Shouldn't the gear ratio be much lower for proper crawling?
my thoughts exactly
We can expect a video that he make some low gear differential gear.😉
If you click on the product link they call it a sand cruiser which is more what it looks like than a crawler
That's a sand truck not crawler
Λειπει μια κλειδαρια στο καπό και ένα βιντσι εισαι ετοιμος για απεγλωβισμους!!!!! Τελεια δουλεια!!!
sensacional cara!!!
amo ver seus vídeos 👏 muito lindo seu trabalho.
can i get the link for that badass screw driver?
That fuel filler makes me nervous.. so much debris could get into that tube..
where did you buy the transmission?
A very nicely made kit! With this engine, it seems more suited as a offroad racer or rally car. For crawling it seems to need bigger wheels and less speed. But honestly, the noise would be too much for me, especially for crawling where I basically stand next to the car all the time.
I think the steering is a bit off, because the steering rod or how it’s called sits in front of the front axle,for better turning it schould be behind the front axle, like on every other car
I expected a bit more price wise, but $1800 is still pretty mad
Where did you get it at? I would like to build one with my son.
For 1700$ I'd be pissed as fuck if they didn't include EVERY screw nut and bolt in the correct size!
And if you want to upgrade anything, you basically have to throw the whole thing away, buy something good from RC4WD, and swap the engine into it.
Love from India 😊❤🇮🇳💐👌🏻👍🏻🙏🏻
Correction… that ain’t metal. “All Parts Made From Chinesium”
I’d check that kit with a Geiger counter first.
Lol
@@misterkota1252for $1800 bucks it better be titanium 😂
Chinese manufactured products are not inherently worse quality, it just so happens that most Chinese products fill the market niche of extremely cheap products. Which, obviously, is going to be low quality, but not because it’s Chinese, but because it’s cheap. This is a $1800 product, if you imply that even with that budget, the Chinese can’t possibly be skilled enough or intelligent enough to manufacture an acceptable product, then that’s a you problem.
That was one hell of a good scrub sir. (The cat saw everything...)
OH, it's so cool! This kit is awesome! I thought car will work poorly, but it's run so well! Feels some inertia of how engine gains RPM and clutch go on, that's cool. Thanks for this video, dude!
14:55: What a cute and lovely kitty.
Despite the Economic crisis its still a good time to start up an investment
Yeah, My first investment with Mr Steven Hatzakis earned me profit of over $25,530 US dollars, and ever since then he has been delivering 🤑
Expert Steven Hatzakis has been managing my trade for months and I keep making profits every week, I made $9,130 last week
Seen a lot of story about him, he must be honest and for people to talk this good about him.
Dude, very therapeutic to watch you builds! Very relaxing! Thanks!
My friend your dedication & passion is unparallel .
Just amazing
Bad ass truck. And it goes in circles like nobody's business.
You kill the "RUclips game"...
Q90 is just perfect!
Very cool! If you take the foam out of the tires, it looks more realistic. 🇧🇷
Question. What company the crawler truck kit. Where can it be ordered through and the price. Thank you.
Very nice rock crawler , Definitely well designed but those shocks gotta be softened up quite a bit for better articulation, are they oil filled ?
What oil did you put in the shocks ? They seem a little springy
Awesome truck! awesome video! hope you like the truck!
hey man i just now saw your video on the turn signal lenses you replaced. How are they holding up now? do you have a link or the brand of the filament you used? thanks!
Far out man. Pretty friggen awesome. Kool colored 🐈.
8:29
I thought you were cutting off the antenna for a second until I realized they were zipties XD
My day just got so much better!
Didn’t see it crawling though. And why is it so bouncy? Can you adjust the suspension?
What brand/make/model is that electric pen screwdriver? I've tried a few but they all turned out to be crap.
as someone who got into this on a now moderately modified scx24, this thing is a damn wet dream lol.
Who makes the cordless torque driver you are using?
Hey there, got a question, i have a 1/10 scale rc nitro car, and i have an bmw m3 e30 lexan bodie, and the bodie isn't sitting straight on the car, do you have any tips for how i can fix that?
You do a great job on all your builds!
I have to admit the body is weird looking and the tires are more of like a sand dragster style. Love your videos and still enjoyed the process
Yea it's like a strange mashup of an early first generation bronco and a early blazer/suburban
What no alternator for battery charge??
This build reminds me of the old Tamiya Bronco. I just love this truck.
Ωραίος ο Γιάννης!
Κάθε βίντεο σου και καλύτερο αδερφέ!
Αντε να βρεθούμε κάνα Γρηγορίου καμιά μέρα να γουστάρουμε!
Are you able to adjust the torque on that driver? Does it have a clutch?
Fluid filled tires for weight to keep tires planted?
What is the servo-spring mechanism physically doing to lock/unlock the differential steering?
Sounds like a motor cycle though. I figure there is not enough metal around it to propagate the noise?
I noticed the same on my 1:24 electric monster truck. The plastic parts made it sound like a toy. Also bounces less like a toy with metal not only because of the oil shocks. My father always used to say that if your 1:24 monster truck can not amputate one's leg with its weight then it is not a monster truck (He did not say such a thing...).
I love it. How much do these run?
Where did you get that mini electric screwdriver?
where do you get one of those small powertool from, very handy? beautiful car, love what TOYAN can do.
Assembly looked really smooth, looks like a very nice kit, great build, 👍👍
I wish low gear was a lot lower, for more control when climbing
Good tips on painting body shells, if you paint the inside white after the colour coat, the colour will pop better an be brighter
The transmitter and receiver are Radiolink RC4Gs and R6FG?
Je connais pas TOYAN mais ils ont l'air de faire de la bonne qualité
I always curious about the gas consumption.
how much is the gasoline consumption?
On the gearbox bracket install, it doesn't look like the provided screw was too long, it just looks crossthreaded. You can see the same issue when the shorter screw was inserted.
Un truc bête 😅: la courroie de distribution tout les combien ? Par contre ils ne mettent pas de carter de courroie ?
I love that they used a lexan version of the blazing blazer body
any chance that thing could pull your bins out on bin day?
Man, i love these videos so much, its a real inspiration to me and my son who loves building things. One request, please lower the volume on the CNC machining.
3:20 no Thread locker? Why? Have it an important reason why you Not Youse it?
is there even shock fluid in those shockes they look like they gonna hop and bounce
Where can I find a screw driver like yours? Nice little tool.
Now what you need is an onboard camera whit goggles and a head tracker 😄
Yo soy de uruguay y mé interesaria adquirir uno de esos para armar, como podria hacer para comprar algo asi?
thats honestly the cutest freaking thing ive ever seen