I was informed to ...NEVER push or pull the Objectives, use Revolving Nose Piece or Turret rather than the Objective Lenses in order to rotate from one Objective to the next. Knowledge learned at University Microscopy studies... thx for doing the video :) I found it very informative.
thanks for the video. just bought mine, I haven't unboxed it yet. going to get it up and running tomorrow. what is the coolest/strangest thing you have viewed with your microscope?
Are these still relevant now or are they fairly obsolete? I've been seeing cheap blue box ones on like Ali express people are swearing by and there supposedly 48mp.. I'm just wondering why these omax are so much money still comparatively..
Thanks for posting this! I got mine today and while the images I get in the microscope are great, the ones I get on my computer are blurry. How do you get them sharp? I'm missing something but I don't know what it is: is it something in the software or in the microscope? also, I only get to see the image in the computer if I press "snap", not "live" as shown on your video. Thank you!
@telma I'm thinking you might have to adjust the tube your camera is sitting on. It's threaded into the microscope body. I would pull a camera out just enough so the O-ring disengages with the tube, Then gently turn the true one way or the other 1/2 to a full turn to start. Then push the camera back down onto the tube and see if you got an increase or decrease and image quality. If it's worse, twist tube the other way until your image quality, eyepiece to computer screen match.
@@riderinsanjose337 Thank you for your reply! I appreciate it, regardless how long it's been since I asked the question. It's hard to believe I got this microscope 7 years ago! I still use it on a weekly basis. I got the adapter for smartphones about 6 years ago and I use my phone to take the pictures. In my opinion, they're higher quality and earlier to share. Thank you again!
I got mine at auction so had no paperwork. How do you get the camera to work on your pc? Do you need to download a specific program to the pc or do you just need to download a driver?
I tried the video feature for the first time today as I've only had my scope 3 days and my entire image although excellent quality is orange?....how did you get your green image? how do you have your software set up?....or are you using a filter?oh ok, I just played around and I had the brightness of the bulb too low :-)
how can i change the measurement of our microscope (same brand and almost same model) I wanted to used (um) but the "px" is always showing though we change it already. HOW?please help us.
Did you have any trouble loading the drivers for the camera? I can get most functions to work with mine including taking the picture, watching video, I am having issues with the red,green and blue colour adjustments appearing to do nothing and I cannot get rid of the overall orange tint to my video and images......how do you get the green tint?
all that does is brighten the image, it doesn't change the colour of the image itself, it eventually gets to the point where it blows all the detail out of the image and becomes white, everything under the adjustment tab works fine except the red, blue and green sliders....Are you operating with the Microsoft camera driver or the one supplied from Omax?....when you look at the driver for the camera in the device manager settings, what does it tell you?I see you have a nice green image on the screen.....I want one of those lolI have the halogen lamp version and you have the L.E.D version, I think that's the only difference.
Hello and thank you very much for the information. I have a question. On the screen of my laptop I can see only small part of what I see on microscope. Do yiu have any idea how i can see all of the vision? Thank you very much.
Maybe, special adaptor will help you. Try to know size of sensor in your camera. Sensors 1/4" and 1/3" use adaptor with magnification (multiplication) 0.3X. For sensors 1/1.8", 1/2" - 0.5X, for 2/3" - 0.7Х or 0.75X, and for sensor 1" - 1Х adaptor. Usually, these adapters are attached to the camera using c-mount or cs-mount. In any case, the biggest picture you can get is a rectangle inscribed in the circle of the field of view of eyepiece (without dark edges in the image).
Hi man! Do you have videos that u can share with us of what you have seen from your microscope ? or pictures to share with us. Im planning to buy similiar to yours but have not seen output images of it Greetings
Hi, nice video. But the maximum useful magnification of a objective its NA value multiplied by 1000. In the case of the 100X target, NA1.25, its maximum useful magnification is 1250X so it is absurd to say that it achieves (useful) increases of 2000
I am interested in getting a omax microscope (p/n:CS-M837ZL-C140U) to use as a camera to take a high resolution photo for small SMD LED. Size is 1.0x0.5x0.5mm (LxWxH). Based on your experience, do you think the omax microscope fulfill the purpose? Appreciate your opinion.
+mimifrank228 The digital camera that came with my microscope is only a 5MP camera. I would consider that a hobbyist resolution. Plus, with the light source for the microscope only coming from beneath the slide tray you would probably need to use a secondary light source to shine down onto the slide try to properly light up the LED (assuming that it isn't completely transparent).
@@mattkeith74 I got this one but I pay 600 www.amazon.com/gp/aw/d/B00SGCEJYC?psc=1&ref=ppx_pop_mob_b_asin_title probably because is an dark-field because I need to look at blood?
Barnard Rabenold - might depend on where you bought it from. OMAX 40X-2000X Digital Lab Trinocular Compound LED Microscope with 5MP Digital Camera and Double Layer Mechanical Stage www.amazon.com/dp/B00SGCG1XE/ref=cm_sw_r_cp_apa_3jJgzbQWQM25C
I got it from Amazon. The exact title was "Awarded Best Compound Microscope 2016 - OMAX 40X-2000X Lab LED Binocular Microscope with Double Layer Mechanical Stage w Blank Slides Covers and Lens Cleaning Paper" (www.amazon.com/Awarded-Best-Compound-Microscope-2016/dp/B0094JTZOU/ref=sr_1_1?ie=UTF8&qid=1494892085&sr=8-1&keywords=Awarded+Best+Compound+Microscope+2016+-+OMAX+40X-2000X+Lab+LED+Binocular+Microscope+with+Double+Layer+Mechanical+Stage+w+Blank+Slides+Covers+and+Lens+Cleaning+Paper) The camera was the selling point for me. But unfortunately, I've recently realized that the page briefly mentions that the camera is sold separately. I've looked at the pdf from the manufacturer's website and it briefly mentions an optional camera, with a picture of a cylindrical device that fits into the eye piece. Unfortunately, the pdf does not make a recommendation on type of camera. What brand would you recommend for a camera specifically designed for this?
I did thoroughly read the description of the product. I bought it before coming to this video. I just assumed that the microscope in the video was the same as the one that I got, but with a detachable camera on top. It's fine though, they still sell a camera that goes into the eyepiece.
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
I was informed to ...NEVER push or pull the Objectives, use Revolving Nose Piece or Turret rather than the Objective Lenses in order to rotate from one Objective to the next.
Knowledge learned at University Microscopy studies... thx for doing the video :) I found it very informative.
Alightment reasons, I assume? Becoming loose or inconsistent?
How you liking your Microscope after 3 years?
its ok
How do you get the picture on the computer ( snap shot) to be clear when using the OMAX 5MP. you did not answer Telma's post
thanks for the video. just bought mine, I haven't unboxed it yet. going to get it up and running tomorrow.
what is the coolest/strangest thing you have viewed with your microscope?
probably some protozoa that was found in a puddle of water from the backyard.
I read on the reviews that the camera is black and white it's not even near 5MB but somewhere near 0.5MB.
Are these still relevant now or are they fairly obsolete? I've been seeing cheap blue box ones on like Ali express people are swearing by and there supposedly 48mp.. I'm just wondering why these omax are so much money still comparatively..
My digital microscope camera is not working on linux. Thinking about installing windows.
Thanks for posting this! I got mine today and while the images I get in the microscope are great, the ones I get on my computer are blurry. How do you get them sharp? I'm missing something but I don't know what it is: is it something in the software or in the microscope? also, I only get to see the image in the computer if I press "snap", not "live" as shown on your video. Thank you!
@telma I'm thinking you might have to adjust the tube your camera is sitting on. It's threaded into the microscope body.
I would pull a camera out just enough so the O-ring disengages with the tube,
Then gently turn the true one way or the other 1/2 to a full turn to start. Then push the camera back down onto the tube and see if you got an increase or decrease and image quality. If it's worse, twist tube the other way until your image quality, eyepiece to computer screen match.
@rider I'm answering a seven-year-old post. DUH
@@riderinsanjose337 Thank you for your reply! I appreciate it, regardless how long it's been since I asked the question. It's hard to believe I got this microscope 7 years ago! I still use it on a weekly basis. I got the adapter for smartphones about 6 years ago and I use my phone to take the pictures. In my opinion, they're higher quality and earlier to share. Thank you again!
I got mine at auction so had no paperwork. How do you get the camera to work on your pc? Do you need to download a specific program to the pc or do you just need to download a driver?
I tried the video feature for the first time today as I've only had my scope 3 days and my entire image although excellent quality is orange?....how did you get your green image? how do you have your software set up?....or are you using a filter?oh ok, I just played around and I had the brightness of the bulb too low :-)
Disculpa en que parte de el microscopio puedo colocar el filtro verde
we got one last week . we like ours a lot
how can i change the measurement of our microscope (same brand and almost same model) I wanted to used (um) but the "px" is always showing though we change it already. HOW?please help us.
hey does it work with mac also and is the digital camera separately? thx
Shall I analysis microstructure of any ferrous and non ferrous material using ME1200-14 model
Did you have any trouble loading the drivers for the camera? I can get most functions to work with mine including taking the picture, watching video, I am having issues with the red,green and blue colour adjustments appearing to do nothing and I cannot get rid of the overall orange tint to my video and images......how do you get the green tint?
did you try adjusting the brightness/light control on the microscope?
all that does is brighten the image, it doesn't change the colour of the image itself, it eventually gets to the point where it blows all the detail out of the image and becomes white, everything under the adjustment tab works fine except the red, blue and green sliders....Are you operating with the Microsoft camera driver or the one supplied from Omax?....when you look at the driver for the camera in the device manager settings, what does it tell you?I see you have a nice green image on the screen.....I want one of those lolI have the halogen lamp version and you have the L.E.D version, I think that's the only difference.
I wonder...if that cam can be used on a telescope also...???
I have a OMAX 40X-2000X Lab LED Binocular Compound Microscope
,can I look at bacteria and viruses with it?
how way to the microscope connect laptop ???
Thank you. It will be nice to share video & photos of your pond water. Does anyone have info on simple stains & staining 'how to do'
can you show some samples you recorded?
Omg I'm in love! :0 need it bad!
I have ordered a similar microscope from Novel. What are the dimensions of the fuse it uses? Is the LED replaceable?
Hello and thank you very much for the information.
I have a question.
On the screen of my laptop I can see only small part of what I see on microscope. Do yiu have any idea how i can see all of the vision? Thank you very much.
Maybe, special adaptor will help you. Try to know size of sensor in your camera. Sensors 1/4" and 1/3" use adaptor with magnification (multiplication) 0.3X. For sensors 1/1.8", 1/2" - 0.5X, for 2/3" - 0.7Х or 0.75X, and for sensor 1" - 1Х adaptor. Usually, these adapters are attached to the camera using c-mount or cs-mount. In any case, the biggest picture you can get is a rectangle inscribed in the circle of the field of view of eyepiece (without dark edges in the image).
Hi man!
Do you have videos that u can share with us of what you have seen from your microscope ?
or pictures to share with us. Im planning to buy similiar to yours but have not seen output images of it
Greetings
Hi, nice video. But the maximum useful magnification of a objective its NA value multiplied by 1000. In the case of the 100X target, NA1.25, its maximum useful magnification is 1250X so it is absurd to say that it achieves (useful) increases of 2000
what is the software download for the program on you computer? i lost everything
Mine came with the disc. Not sure if it could be downloaded.
@@mattkeith74 do you know if there is any way to get another disc
does the program work with mac? if you got the box handy cause i can't find any info
The software that came with my microscope says Microsoft Windows XP/Vista/7/8 32-bit and 64-bit & Mac OSX and Linux.
+Matthew K will it work for windows 10?
LordofArbiters I'm running on windows 10
what are you looking in the microscope if u dont mind im asking.
pinus leaf
This is for pathology, histology and microbiolology
What is price?
please can you send me the driver camera and softwer i lost it ,thank you
Quanto custa?
Can you put something that is alive under the USB. I would like to see that
I am interested in getting a omax microscope (p/n:CS-M837ZL-C140U) to use as a camera to take a high resolution photo for small SMD LED. Size is 1.0x0.5x0.5mm (LxWxH). Based on your experience, do you think the omax microscope fulfill the purpose? Appreciate your opinion.
+mimifrank228 The digital camera that came with my microscope is only a 5MP camera. I would consider that a hobbyist resolution. Plus, with the light source for the microscope only coming from beneath the slide tray you would probably need to use a secondary light source to shine down onto the slide try to properly light up the LED (assuming that it isn't completely transparent).
is it Amscopre?
Have you looked at your blood cells with this?
with that microscope could I use it to see the edge of a razor
please name of sofrver
for india how i order it
How much did you pay for it?
$360 6 years ago
@@mattkeith74 I got this one but I pay 600 www.amazon.com/gp/aw/d/B00SGCEJYC?psc=1&ref=ppx_pop_mob_b_asin_title probably because is an dark-field because I need to look at blood?
Can you do blood test with those?
Thanks
which is better amscope or omax ?
i've only used the omax.
Mine didn't come with that thing on the top.
Barnard Rabenold - might depend on where you bought it from.
OMAX 40X-2000X Digital Lab Trinocular Compound LED Microscope with 5MP Digital Camera and Double Layer Mechanical Stage www.amazon.com/dp/B00SGCG1XE/ref=cm_sw_r_cp_apa_3jJgzbQWQM25C
I got it from Amazon. The exact title was "Awarded Best Compound Microscope 2016 - OMAX 40X-2000X Lab LED Binocular Microscope with Double Layer Mechanical Stage w Blank Slides Covers and Lens Cleaning Paper" (www.amazon.com/Awarded-Best-Compound-Microscope-2016/dp/B0094JTZOU/ref=sr_1_1?ie=UTF8&qid=1494892085&sr=8-1&keywords=Awarded+Best+Compound+Microscope+2016+-+OMAX+40X-2000X+Lab+LED+Binocular+Microscope+with+Double+Layer+Mechanical+Stage+w+Blank+Slides+Covers+and+Lens+Cleaning+Paper)
The camera was the selling point for me. But unfortunately, I've recently realized that the page briefly mentions that the camera is sold separately. I've looked at the pdf from the manufacturer's website and it briefly mentions an optional camera, with a picture of a cylindrical device that fits into the eye piece.
Unfortunately, the pdf does not make a recommendation on type of camera. What brand would you recommend for a camera specifically designed for this?
Thou shalt NOT take the name of the Lord thy God in vain for the Lord will not hold him guiltless that taketh his Name in vain! Blessings on you!
I did thoroughly read the description of the product. I bought it before coming to this video. I just assumed that the microscope in the video was the same as the one that I got, but with a detachable camera on top. It's fine though, they still sell a camera that goes into the eyepiece.
Price
Ya - where is the focus in this video? #lolz
Send link
This video was made by end user. I'm not a seller/distributor.
Wow
Are you a researcher or do you just like microscopy?
David Mollura - just bought it to use the my kids for fun.
Hopefully the LED lasts forever because they don't sell replacements... shady.
This is very bad quality.
I have also AmScope cameta is garbage, mine is model MU 1400 is very bad quality.