Thanks. Just bought a Open Box 40X-2500X LED Trinocular Compound Microscope w 3D Two-Layer Mechanical Stage and AmScope MU Series 9.0MP USB 2.0 High-performance Color CMOS C-Mount Microscope Camera with Reduction Lens and set it up with my stream watching this video. this helped me understand why none of the threads except the one to the camera were actual threads you said slide them in. I want to put kapton around the sides to hold the camera in tight in case i bump the table. the Tinker University lab appreciates your video contribution!
Hi, I'd like to know how do you compensate the eyepiece of 10x just by inserting the adaptor of 30mm and the eyepiece camera? Does the eyepiece camera has embedded the 10x zoom of the regular eyepiece lens? Thanks in advance.
I have a trinicular with an MU camera, but the focus part is manual, it doesn't spin up and down like in the video and mine was purchased 3 months ago. This one looks a lot easier to focus. Did I receive an older focus part?
+AmScope Videos I have the SM745TP, the picture on the website also shows and turning adjustable style Tri port. I didn't notice it because the frame rate was 4, so I updated my computer to an i7 recently trying to improve recording with the MU300 and realized this when looking at your videos for tips on increasing frame rates with the camera. The calibration video also shows a different slide then mine came with, so I haven't figured out how to calibrate distance yet, I'll get back to that later. Just thought i would let you know the video uses a different slide then the one some are being shipped with.
can anyone plz tell me as a beginner what microscope should i get so i can attach my slr camera (olympus omd em1 mft) to microscope? i want to get maximum magnification and clear images and my budget is about 1000$. thank you
I have a mt130 camera, downloaded the software (toupview 3.7) from the website and it didn't work, the software detects the camera but when i try to see video it fails to start, any idea of what it could be?
Toupview is for the MU Series Camera. Not the MT Series Camera... MT/MA Camera software can be downloaded here: www.dropbox.com/s/yf8vj8h3hbpqpga/2012_10_22_MA-Driver-and-Software-MT3007-PC.zip
Thanks. Just bought a Open Box 40X-2500X LED Trinocular Compound Microscope w 3D Two-Layer Mechanical Stage and AmScope MU Series 9.0MP USB 2.0 High-performance Color CMOS C-Mount Microscope Camera with Reduction Lens and set it up with my stream watching this video. this helped me understand why none of the threads except the one to the camera were actual threads you said slide them in. I want to put kapton around the sides to hold the camera in tight in case i bump the table. the Tinker University lab appreciates your video contribution!
Thank you. Very helpful
Hi, I'd like to know how do you compensate the eyepiece of 10x just by inserting the adaptor of 30mm and the eyepiece camera? Does the eyepiece camera has embedded the 10x zoom of the regular eyepiece lens? Thanks in advance.
I have a trinicular with an MU camera, but the focus part is manual, it doesn't spin up and down like in the video and mine was purchased 3 months ago. This one looks a lot easier to focus. Did I receive an older focus part?
Not necessarily, not all of our microscopes have adjustable trinocular ports. What microscope model number do you have?
+AmScope Videos I have the SM745TP, the picture on the website also shows and turning adjustable style Tri port. I didn't notice it because the frame rate was 4, so I updated my computer to an i7 recently trying to improve recording with the MU300 and realized this when looking at your videos for tips on increasing frame rates with the camera. The calibration video also shows a different slide then mine came with, so I haven't figured out how to calibrate distance yet, I'll get back to that later. Just thought i would let you know the video uses a different slide then the one some are being shipped with.
microscope 2016
can anyone plz tell me as a beginner what microscope should i get so i can attach my slr camera (olympus omd em1 mft) to microscope? i want to get maximum magnification and clear images and my budget is about 1000$.
thank you
I have a mt130 camera, downloaded the software (toupview 3.7) from the website and it didn't work, the software detects the camera but when i try to see video it fails to start, any idea of what it could be?
Toupview is for the MU Series Camera. Not the MT Series Camera... MT/MA Camera software can be downloaded here: www.dropbox.com/s/yf8vj8h3hbpqpga/2012_10_22_MA-Driver-and-Software-MT3007-PC.zip
American Scope i install it but still can't see the camera, can i get support or there is a video of that software?