E39 Reverse Camera Install.
HTML-код
- Опубликовано: 29 авг 2024
- Hello this is a diy on the installation and wiring for a reverse camera. This will work on E39 E38 E46 E53 and possibly many other bmws. The only requirement is a display head-unit. Please let me know if you have any questions
please show all the work. the job was super. I didn't know where the cabel went from.
Sorry. Which cable would you like more information about?
Could you please show the cable installation more detailed?
Hey!
How can i install in E38 facelift with tv module and 16:9 same reverse camera and OEM front camera?
And i dont have a OEM Switchbox.
I do not completely understand your question sorry. You wish to add a front and rear camera or you already have a front camera?
Houston Harris - I have a 525i E39 but not the same head unit you have, I have the basic unit with a CD player. I installed a XTRONS PQ1039BL and want to add a backup camera, I got the camera installed and trying to run the video and power wire to the front, how to do I get the wires from back trunk to the front?
Remove the rear seat and run the wires through the rear firewall. Then along one side of the car underneath the trim at the edge of the carpet. I recommend the passenger side. Then across under the dash to the headunit
Hi there, can I get in contact with you as need the wiring plugs as you show, hoping you can help. Im on NZ, also my wiring is bit different on the camera.....yes I'm a bit too flash on electronics.
Absolutely
@@HoustonHarris could you PM please Cheers
@@kerryfisher5190 give me a message on Facebook. I run the bmw e38s of new Zealand fb page.
Can't work out if you're a Kiwi from the States or a Yankee living in NZ..
American in nz 😂