Hi guys, thanks for watching! 🔔 Subscribe (It's FREE!) ➜ bit.ly/randomchris Do you want to make money online? ➜ randomchris.com/financialfreedomPDF Buy a new crank sensor here ➜ amzn.to/2Ozt2Vm Visit amzn.to/37kM7EB to pick up a FREE audio book with a 30 day free membership to Audible! And don't forget: LOVE LIFE! 👍
Cannot get the new one one back in after tapping the old one out… put oil on it but it won’t budge after 1/3 way in . Will it hurt to lightly tap it down ? 😞
Good advice Chris. It was an easy replacement on my Saab after cutting out only after a few miles of driving. It appears the sensor was working when cold but not when hot. Trouble is as the car coasted to a stop it threw up a Traction Control warning so made me think that was the problem initially. Doh!
Hi, My car is starting to do this "when hot" also. So did you find out if the old sensor was still any good since it seemed to be just a weather issue? Thank you
@@MsApril16th If there is a coil in the sensor it may have a break in it and only lose current when hot. Easy cheap replacement to do. Cyclone Sid's channel touches on other engine stop issues caused by electric connections.
Could u come over and do it for me. I’m just across the pond, a few miles in ☺️. It was such a good video but I’m still lost. The mechanics at my local shop can’t fix anything but a bill.
I just had a mechanic tell me the code came up so it needed to get replaced on my saturn ion..buuut my car runs and everything i see if its bad the car won't start??🤔
I started having problem few days ago when my car doesn't start specially when the engine is hot and the speedometer went to zero and stop working. I took it and have it diagnostics at a car dealer after the local auto shop miss up there diagnostics. I took the car to my mechanics because the car dealer is charging me $400 something for just replacing the sensor. I start researching myself and happen came across your RUclips. I thank you the info and learning from you. I wish my Papa was still alive because he was an old fashion chief mechanic in a Logging Company. He knows the problem right away by just listening to the sound of the engine =_)
Thanks! But... Halfway through I realized, this wasn't a camshaft video... I searched camshaft... I got crankshaft... But you told me it's generally easier! So that's cool lol. I went to replace the water pump on Mom's 2000 mustang. Found it in horrible condition! Heater hose was bent all to he11. A bolt was broke off in there was half the problem to begin with. Somehow at that moment that alternator decided to go the rest of the way out. And when I decided this is getting over my head, I put it in the shop, where they found the bad camshaft sensor. I had figured some valves just needed cleaned. So a week long project, and putting it in the shop later, THIS is all I gotta do to get her car running normally again. I can live with that! They priced it at about $150. But I can get the part for 10-15 bucks. Probably gonna do it myself and save the thousand percent mark up
thanks! i recently put in a NEW (but bad) CKP sensor and its apparently shorted internally- screwing up my fuel level gauge, ignition coil/ignitor(?) and setting off a host of other selonoids- et al! I cleaned all grounds, rebuilt my fuse box, new ECU, cleaned everything........no changes UNTIL i just now decided to swap back in the old CKP sensor. All the electrical clicking, etc went away immediately and Im not going thru the KEY RELEARN process for the new ECU
Great work Buddy, I'm From south America Guyana,I have a 2000 model Japanese RAV 4, recently it's cutting off or The rev is fluctuating,and my mechanic can't seems to find The problem, any suggestions
Great video. very informative and easy to understand and see what u r doing. And a few extra hints and tips too. Thank u. Hopefully mine will be similar Nd similarly easy. Just picked the part up so just gonna see if I can seen it.
Sadly in my 2000 Olds Intrigue this sensor is behind the starter, have to take starter out. And in reality honestly don't know what is wrong. Car ran fine Tues., Thurs. needed to go out, car dead. Battery is fine. Friend came over and hit the starter with hammer from underneath but nothing. He doesn't do anything electrical. Watched some other video and got sick to my stomach. That guy traced problem to PCM. I'm now petrified. Way to broke to have it towed and serviced in shop. Wish you were here near Detroit, Mi. Christopher. Love your personality.
Good video but a tad misleading as far as saying "On any car". The crank sensors are mounted in quite a few places, at the flywheel end of the engine, at the front or pulley end of the engine. Some require removal of quite a few parts to get to it such as ones mounted under the timing belt covers. They are there somewhere and some are not quite so easy. I own a garage and have done enough of them on various vehicles.
A bad crank sensor usually shuts the car down completely. I have seen them act up intermittently but eventually it will go bad. Usual cause is a no start condition. At times it will cause stalling and may be difficult to restart until it cools off. It won't cause any damage unless it were to cause a stall situation in traffic which would put you in harms way possibly. Glad to help Charles. I have my own shop and have changed dozens and dozens of crank sensors on various makes and models of cars. Some are easy and some are a royal PITA....lol
Dale Stump Dale thanks man your videos are amazingly helping me..and I have 2005 chevy impala and mines stops every once in a while so I took it to Chevron and they told it was the Crankshaft sensor..I don't have the cash to fix it now do you think I'll be straight til July 1, if I only drive it from A to B??
It's hard to predict when it could go bad. I just did one in a 2005 Cavalier with the 2.2 4 cyl. and it was fairly easy. You need to remove the starter and it is right above it. I wouldn't plan any long trips until you get it replaced. I'm sorry but these aren't my videos, I just commented on it but am glad I could possibly help you.
very good video. My Fiat Stilo Diesel unfortunately has tthe crankshaft sensor default and won't start to get to my garden. Dead. I'm afraid I must call assistance , impossible to reach probable seat in the street. I suscribed. Thank you Chris
My pleasure, benvenuto a bordo! Ho un altro canale di RUclips con la mia moglie (italiana) e la nostra bimba https:ruclips.net/user/sailingbritaly :-) In bocca al lupo per la macchina! Cheers, Chris 👍
AH Christopher..just subscribed !.....do you have ANY IDEAS for me please.......ive been trying to remove the retaining bolt from my crank shaft sensor (since last lockdown :( ........on a ford transit, bugger to get to as on back on block and so hard to get any tools in there.....just spent 2 hrs with a neighbour and tried to put a screwdriver between the plastic and the engine, to leaver , the bolts just going round & round .....any tips? ideas please ..I soo wanna do the victory dance ....!!
+JuiceMyRandomness Thanks Carl. It's all easy once you get into it. I learn best by doing so if I don't know how to do something I get stuck in and learn along the way... :-)
Good evening Chris. I am very excited about giving this a go myself as all the garages seem to take lots if cash but have still yet not fixed the problem. So I have a diagnostics tester thingy now and tonight it has come up with P0341. So may I please ask you to step in ( before I go ahead and cock this up ) and confirm that this is the problem. I have already had 4 diagnostic tests and 2 new cam sensors. I am willing to try this but could I have s bit more insight before I do. Thank you
Hi Victoria, here is a very useful link with lots of relevant information: www.samarins.com/diagnose/p0341.html It’s worth checking the things in that article but I have also heard of unserviceable crankshaft sensors creating a spurious camshaft senso fault code. As the crank sensor is cheap and easy to replace you might want to put that onto your list of things to check / replace in your fault diagnosis & rectification. As with any fault finding, it’s a good idea to get as much information as you can to use as clues as to what the problem is and then make a list of things to check / replace starting with the easiest, quickest and cheapest things to go through first, before working down the list to the more complicated things. (I have seen people waste a lot of time & money trying to replace expensive components when something as simple as a bad connection or a blown fuse was the culprit). Time spent thinking and writing down possible causes and a priority list of how to go through the fault-finding process is always time well spent. Happy fixing! Chris
Hi i have a vauxhall vectra 2007 and my engine light tells me the camshaft sensor needs replacing. Do i change the camshaft sensor and the crankshaft sensor or just the cam shaft sensor i know where the cam shaft sensor is but dont know where the crankshaft sensor is. Please can tou advice me a solution thanks
i changed out both camshaft sensors because it came up for one then the other side then the crankshaft sensor code came up changed it out and still the engine light come back on
hello today we tried to replace bosch orinal and faulty crank shaft sensor with subsistute ERA compatible part new one and it gave same error g28 while not starting do you have any idea why it did not work?
Hey Chris, hate to be a pest. But I cannot find my crankshaft sensor on my astra mk4 2.0 dti. It isnt in the location in this video. My mk4 1.7 VAN has it in this location. Could you please give me advice, I urgently need to change my sensor ASAP and I have the stuff. Just no accurate location.
Hi Chris, I have problem with my opel astra h 1.7 cdti, when engine is hot engine stop and I have to wait 15-30 min to turn on again. So there are 2 or more sensor and this one you have make a video which one needs to replace? Thank you for video and answer. Have a great day.
Ive changed this sensor but i forgot click the connector to this metal holder, so i unscrew the sensor for the second time and get it to metal holder and i forgot disconnect battery. Is it problem ? First time i disconnect the negative on battery.
When the crankshaft sensor starts to go bad, it starts showing symptoms when it's cold. This is my own experience. You just can't find that information anywhere. You could easily think that there is a problem with the mixture ratio, although the crankshaft sensor may be the real culprit and may work well in warm weather, but at a certain degree of frost it starts to show symptoms.
I assume no worry that oil comes pouring out? The old sensor had oil on it when you pulled it. Is there any need to 1st drain the oil to change the sensor?
Crankshaft and cramshaft are the same sensor???? I mean can I use the same sensor???? O need to buy cramshaft sensor and camshaft? Because I have the problem P0335 on mi sentra 04, in the work shop told me the sensor are the same!
This guy is great! I want to open a garage and this guy is our man. Very personable and brilliant
Cheers Dominic! This was one of my first videos so I was very self-conscious in front of the camera. I think I've improved a lot since then. 👍
but very proud and expensive. He would want gain top of everyone in the shop
Hi guys, thanks for watching! 🔔 Subscribe (It's FREE!) ➜ bit.ly/randomchris Do you want to make money online? ➜ randomchris.com/financialfreedomPDF
Buy a new crank sensor here ➜ amzn.to/2Ozt2Vm
Visit amzn.to/37kM7EB to pick up a FREE audio book with a 30 day free membership to Audible!
And don't forget: LOVE LIFE! 👍
Scotty Knows! That’s what I say when I share your videos. Your energy is addictive, in a good way! Thanks Scotty!
My pleasure Fred! ;-)
Cannot get the new one one back in after tapping the old one out… put oil on it but it won’t budge after 1/3 way in . Will it hurt to lightly tap it down ? 😞
How come you didn't have to perform a relearn procedure?
love how you did everything step by step. makes it much easier on me
Thanks for watching and commenting Jocelyn :-)
🔥🔥
Real good video, great camera shots and detailed explanations, Thanks !!
Thank you Keenan, for some reason the visibility of this video on RUclips has been quite low... I'm glad you found it useful! Cheers, Chris 👍
Well done, especially the hop, skip and a jump.
Never commented on any video's before but really liked Random Chris, easy to understand even for a dumb ass like me!!
Thank you for taking the time to comment James. Cheers, Chris 👍
I understand. I'm a woman and he explained everything in layman's terms.
Told me exactly what to do and where to find it. Now I think I can replace the part myself!
Good luck with the job Donna! 🙂
Good advice Chris. It was an easy replacement on my Saab after cutting out only after a few miles of driving. It appears the sensor was working when cold but not when hot. Trouble is as the car coasted to a stop it threw up a Traction Control warning so made me think that was the problem initially. Doh!
Hi, My car is starting to do this "when hot" also. So did you find out if the old sensor was still any good since it seemed to be just a weather issue? Thank you
@@MsApril16th If there is a coil in the sensor it may have a break in it and only lose current when hot. Easy cheap replacement to do. Cyclone Sid's channel touches on other engine stop issues caused by electric connections.
Great video but the victory dance in the end............Got me to subscribe :D
👍
great video. I spotted the red ant, but more interesting was the Opel! have not seen these on UK roads for years.
Thanks Barry, this was in Italy (My wife is Italian) 👍
@@christopher_barr Hi Chris thanks for your reply barry
Could u come over and do it for me. I’m just across the pond, a few miles in ☺️. It was such a good video but I’m still lost. The mechanics at my local shop can’t fix anything but a bill.
Sure boo I got you 💪🏾😏
Super helpful! I like the way you do this without any dilly dally!
Cheers mate, I'm glad you found this useful. This was one of my first videos and it's funny for me to watch back now. :-)
Cheers from "across the pond", I'll save a few dollars. Thanks for the tip :-)
My pleasure Dave! Cheers, Chris 👍
I'm putting one on a 05' Neon right now thanks for sharing. I have owned it 15 yrs only has a 100k on it today...
Great job bro,i had that problem with my Saturn Vue, crank and no start.
I just had a mechanic tell me the code came up so it needed to get replaced on my saturn ion..buuut my car runs and everything i see if its bad the car won't start??🤔
I started having problem few days ago when my car doesn't start specially when the engine is hot and the speedometer went to zero and stop working. I took it and have it diagnostics at a car dealer after the local auto shop miss up there diagnostics. I took the car to my mechanics because the car dealer is charging me $400 something for just replacing the sensor. I start researching myself and happen came across your RUclips. I thank you the info and learning from you. I wish my Papa was still alive because he was an old fashion chief mechanic in a Logging Company. He knows the problem right away by just listening to the sound of the engine =_)
Good luck with your repair Jessa. I’m sorry to hear you lost your father, it sounds like he was a great man. They will always live on in our hearts...
Can the ignition switch go bad at the same time?
Perfect timing for me. Thanks for this video. Greetings from Lagos, Nigeria.
Cheers Tunde 👍
Can i replace these sensors if my vechicle is fine?
Woah a video feed my actual car don't see that everyday
Beautiful instructions thank you see you soon 😊
Hi buddy we have in Australia is that a Ah Astra Holden thanks for your help
Why need to remove the battery? Thanks
Thanks! But... Halfway through I realized, this wasn't a camshaft video...
I searched camshaft... I got crankshaft... But you told me it's generally easier! So that's cool lol.
I went to replace the water pump on Mom's 2000 mustang.
Found it in horrible condition!
Heater hose was bent all to he11.
A bolt was broke off in there was half the problem to begin with.
Somehow at that moment that alternator decided to go the rest of the way out.
And when I decided this is getting over my head, I put it in the shop, where they found the bad camshaft sensor.
I had figured some valves just needed cleaned.
So a week long project, and putting it in the shop later, THIS is all I gotta do to get her car running normally again.
I can live with that!
They priced it at about $150.
But I can get the part for 10-15 bucks.
Probably gonna do it myself and save the thousand percent mark up
This was great BUT what about relearning the new sensor?
Thanks man very helpful. Watching this video in sept 2020😁🚗🚘
👍😁
This was very informative thank you.
My pleasure! 👍
Very useful & Good presentation 👍🏼
Loved the victory dance👍🏻👍🏻👍🏻👍🏻👍🏻😀😀😀
👍
thank you very much! i just replaced my crankshaft sensor on my astra gtc my06 1.7. very useful video
My pleasure Alessandro - sono contento che sei riuscito ad aggiustare la tua macchina in parte grazie al mio video!! Cheers! Chris 👍
Is draining the oil necessary while doing this?
No 👍
That looks easy thnx
thanks! i recently put in a NEW (but bad) CKP sensor and its apparently shorted internally- screwing up my fuel level gauge, ignition coil/ignitor(?) and setting off a host of other selonoids- et al! I cleaned all grounds, rebuilt my fuse box, new ECU, cleaned everything........no changes UNTIL i just now decided to swap back in the old CKP sensor. All the electrical clicking, etc went away immediately and Im not going thru the KEY RELEARN process for the new ECU
Thanks. There isn’t any fault code coming up. Does this mean it could still be the crankshaft sensor?
Super helpful
Thanks
Great work Buddy, I'm From south America Guyana,I have a 2000 model Japanese RAV 4, recently it's cutting off or The rev is fluctuating,and my mechanic can't seems to find The problem, any suggestions
Good video. Thank you!
Great video. very informative and easy to understand and see what u r doing.
And a few extra hints and tips too.
Thank u.
Hopefully mine will be similar Nd similarly easy.
Just picked the part up so just gonna see if I can seen it.
Sadly in my 2000 Olds Intrigue this sensor is behind the starter, have to take starter out. And in reality honestly don't know what is wrong. Car ran fine Tues., Thurs. needed to go out, car dead. Battery is fine. Friend came over and hit the starter with hammer from underneath but nothing. He doesn't do anything electrical. Watched some other video and got sick to my stomach. That guy traced problem to PCM. I'm now petrified. Way to broke to have it towed and serviced in shop. Wish you were here near Detroit, Mi. Christopher. Love your personality.
Thank you so much
You're welcome George 👍
Good video but a tad misleading as far as saying "On any car". The crank sensors are mounted in quite a few places, at the flywheel end of the engine, at the front or pulley end of the engine. Some require removal of quite a few parts to get to it such as ones mounted under the timing belt covers. They are there somewhere and some are not quite so easy. I own a garage and have done enough of them on various vehicles.
Dale Stump how long can you ride around with a bad Crank shaft sensor, and what kind of damage can it do??
A bad crank sensor usually shuts the car down completely. I have seen them act up intermittently but eventually it will go bad. Usual cause is a no start condition. At times it will cause stalling and may be difficult to restart until it cools off. It won't cause any damage unless it were to cause a stall situation in traffic which would put you in harms way possibly. Glad to help Charles. I have my own shop and have changed dozens and dozens of crank sensors on various makes and models of cars. Some are easy and some are a royal PITA....lol
Dale Stump Dale thanks man your videos are amazingly helping me..and I have 2005 chevy impala and mines stops every once in a while so I took it to Chevron and they told it was the Crankshaft sensor..I don't have the cash to fix it now do you think I'll be straight til July 1, if I only drive it from A to B??
Dale Stump royal pita😂😂
It's hard to predict when it could go bad. I just did one in a 2005 Cavalier with the 2.2 4 cyl. and it was fairly easy. You need to remove the starter and it is right above it. I wouldn't plan any long trips until you get it replaced. I'm sorry but these aren't my videos, I just commented on it but am glad I could possibly help you.
very good video. My Fiat Stilo Diesel unfortunately has tthe crankshaft sensor default and won't start to get to my garden. Dead. I'm afraid I must call assistance , impossible to reach probable seat in the street. I suscribed. Thank you Chris
My pleasure, benvenuto a bordo! Ho un altro canale di RUclips con la mia moglie (italiana) e la nostra bimba https:ruclips.net/user/sailingbritaly :-) In bocca al lupo per la macchina! Cheers, Chris 👍
Thanks so much done mine now
Thank you for this video! It’s good and shows you step by step. :)
My pleasure! 👍
Thanks bro
Hi Chris where can I find the crank shaft sensor on a tata indica 2013 model please
I was told it could start with the sensors, leading into the whole circuit. I got p0335, p0340 from an OBDII scanner, hence this video.
Thanks
My pleasure Joe, happy fixing! Cheers, Chris 👍
AH Christopher..just subscribed !.....do you have ANY IDEAS for me please.......ive been trying to remove the retaining bolt from my crank shaft sensor (since last lockdown :( ........on a ford transit, bugger to get to as on back on block and so hard to get any tools in there.....just spent 2 hrs with a neighbour and tried to put a screwdriver between the plastic and the engine, to leaver , the bolts just going round & round .....any tips? ideas please ..I soo wanna do the victory dance ....!!
Great video!
Thanks mate!
👍
great quality blog but man i struggle with gears on my push bike! lol
+JuiceMyRandomness Thanks Carl. It's all easy once you get into it. I learn best by doing so if I don't know how to do something I get stuck in and learn along the way... :-)
best way to do it really! otherwise your sitting on your hands waiting for someone else to do it!
Great explanation and video. Thank you Christopher!
My pleasure William, thanks for your comment 👍
You obviously have to know cars for this video to be useful.
Hello, Is it possible if the OBDII Scanner doesn't recognize the crankshaft sensor to be broken?
What if I disconnected both battery post will it be fine
boy that battery changed colors i think it over heated at the end lmao 😂
Yes Ramon, it got so hot it turned orange :-)
Great videos, I subscribed :)
Thank you, welcome aboard! 👍
Cheers !
My sensor was absolutely knackered
what does knackered mean?
I know exactly where the crankshaft position sensor is on my 2008 Pontiac G5, unfortunately there is no way of getting to it. Not nearly enough room.
Yer takes it to a shop where they puts it on a hoist.
Is there a relearn process on the obd2 after install?
Good lad
Good evening Chris. I am very excited about giving this a go myself as all the garages seem to take lots if cash but have still yet not fixed the problem. So I have a diagnostics tester thingy now and tonight it has come up with P0341.
So may I please ask you to step in ( before I go ahead and cock this up ) and confirm that this is the problem. I have already had 4 diagnostic tests and 2 new cam sensors.
I am willing to try this but could I have s bit more insight before I do.
Thank you
So you cant help me on this one? I think I'm getting there as my belt is very screachy too. Wish me luck
Hi Victoria, here is a very useful link with lots of relevant information: www.samarins.com/diagnose/p0341.html It’s worth checking the things in that article but I have also heard of unserviceable crankshaft sensors creating a spurious camshaft senso fault code. As the crank sensor is cheap and easy to replace you might want to put that onto your list of things to check / replace in your fault diagnosis & rectification. As with any fault finding, it’s a good idea to get as much information as you can to use as clues as to what the problem is and then make a list of things to check / replace starting with the easiest, quickest and cheapest things to go through first, before working down the list to the more complicated things. (I have seen people waste a lot of time & money trying to replace expensive components when something as simple as a bad connection or a blown fuse was the culprit). Time spent thinking and writing down possible causes and a priority list of how to go through the fault-finding process is always time well spent. Happy fixing! Chris
Brilliant I will get to the bottom of this. Ta very muchly
Hi i have a vauxhall vectra 2007 and my engine light tells me the camshaft sensor needs replacing. Do i change the camshaft sensor and the crankshaft sensor or just the cam shaft sensor i know where the cam shaft sensor is but dont know where the crankshaft sensor is. Please can tou advice me a solution thanks
Great job 👏👍👌🇬🇧
top tip...
👍
i changed out both camshaft sensors because it came up for one then the other side then the crankshaft sensor code came up changed it out and still the engine light come back on
Clear the code
4:29 hi were is the cam shaft sencor on a 3.0 v6 1999 mercury sable
Vauxhall insignia has this code P2617 - Crankshaft Position
Signal Output Circuit/Open
Can I buy crankshaft sensor and replace ? Car isn’t starting
hello today we tried to replace bosch orinal and faulty crank shaft sensor with subsistute ERA compatible part new one and it gave same error g28 while not starting
do you have any idea why it did not work?
Is it useful for P050074 too?
Great vid! Thank you Chris.
My pleasure Graham. This was one of my first vids, so I was very uncomfortable in front of the camera. 😂 Cheers, Chris 👍
Hey Chris, hate to be a pest. But I cannot find my crankshaft sensor on my astra mk4 2.0 dti. It isnt in the location in this video. My mk4 1.7 VAN has it in this location. Could you please give me advice, I urgently need to change my sensor ASAP and I have the stuff. Just no accurate location.
You are a star! Grace Auto Garage Abu Dhabi, Mussaffah charged me 108.89 USD(400 AED)for replacing this sensor.
Would it be on the same spot on a 05 civic?
Hi Chris, I have problem with my opel astra h 1.7 cdti, when engine is hot engine stop and I have to wait 15-30 min to turn on again.
So there are 2 or more sensor and this one you have make a video which one needs to replace?
Thank you for video and answer.
Have a great day.
Thank you very much for this video again really helpful 😊
@@bekimkadriu1636 which one was it? i have the same problem with my astra h 1.3 cdti which one did you replace? help me
Ive changed this sensor but i forgot click the connector to this metal holder, so i unscrew the sensor for the second time and get it to metal holder and i forgot disconnect battery. Is it problem ? First time i disconnect the negative on battery.
good stuff
The hardest thing is not to change it but to know where it is? I can't find this sensor on my 2006 ford focus ti vct petrol !?
Not if you have certain ford engines. Some can be a pain as they need setting in the hole correctly.
Need help, My Toyota brobox has problem of getting off when I press speed on packed
Thanks very much!
Subscribed
Welcome aboard Chris 👍
When the crankshaft sensor starts to go bad, it starts showing symptoms when it's cold. This is my own experience. You just can't find that information anywhere. You could easily think that there is a problem with the mixture ratio, although the crankshaft sensor may be the real culprit and may work well in warm weather, but at a certain degree of frost it starts to show symptoms.
How do you find a crank shaft sensor on a mini 2021.Please
Why is there a different battery being connected at the end
I assume no worry that oil comes pouring out? The old sensor had oil on it when you pulled it. Is there any need to 1st drain the oil to change the sensor?
I was wondering the same thing.🤦🏼
How much should this cost to get done by a mechanic?
Crankshaft and cramshaft are the same sensor???? I mean can I use the same sensor???? O need to buy cramshaft sensor and camshaft? Because I have the problem P0335 on mi sentra 04, in the work shop told me the sensor are the same!
Do I need to reset or clear the fault code after i I changed the crankshaft sensor? Or no need?
Disconnect the battery (if you follow this video you will have done that anyway) and this resets the fault codes. Cheers, Chris
Did you not have to relearn the crankshaft ?
Hello I don't really want to get under my car.....just in case it falls on top.donyp u think I could do it from above ...thank you 😀
It depends on the car - some you can, some you can't. If you do go under then use jackstands so the car can't fall on you. Happy fixing! 👍
I was watching your video but im failing to locate crankshaft sensor on my 2009 4x4 Antara
Where is the crankshaft sensor located on the 2012 Buick Verano? I bet I won’t get any replies.
Great vid
Thanks! Chris 👍
Great vid Chris, subbed
Thanks Trev, welcome aboard! Cheers, Chris
@@christopher_barr Thank you too for the subt
Hi there could you tell me please where the crankshaft sensor is on a 2006 Peugeot 407 2.0 hdi? Thanks
www.peugeotforums.com/forums/407-41/2005-2-0hdi-crankshaft-position-sensor-81673/index2.html Hope this helps, Chris 👍
Thankyou very much
👍
you said the fault code is P0335 while it is written on the screen P0340. Which one is it ?????????
Nice