Finally B gets hooked up. Need to throw a turbo in there while it's apart. Doesn't have to be big just a little spooly boy to wrap up fast and blow out like another 40 hp
Go to Lowe’s and get some small rubber pipe caps. They are perfect for capping water pumps so you don’t have coolant pissing on the floor as you pull an engine
I have a sneaking suspicion that jimmy doesnt just not swear to stay monetized, he doesn't swear in his videos because grandma oakes is watching 🤣 but i mean they seem like the kind of crew that has no need to drop F bombs all the time
Make sure you use an MS43 DME super easy to tune with RomRader TunerPro etc just get the updated coils Surprised Brian didnt get the M56 SULEV metal valvecover that has the CCV/PCV built in !
I'm a B30-guy for 3 years and I'm tuning them on MS43 so have to say something :) ZHP cams are almost the same as stock. This is the difference like putting in Hondas B18C4s to B16 - like none :) I have b30 with m52 manifolds, part of intake tube welded, 70mm single back exhaust and tune - such setups in Poland are making around 24x PS and around 320Nm (235tq) - AT THE CRANK. With m50 intake you can count on 25x PS. When this car will show 23x-24x PS AT WHEELS it means, that dyno reading between Poland and States are VERY different :D When such will be - I would love to see some 0-140 or 0-160km/h runs (I have 3,38 diff) and then we will see does this is really faster as should be. Nevertheless, really waitig for the final cause I'm in love with my missle and would love to compare it (even on vids) what are the difference between us. I had it in sedan too, but crashed it, so everything will be compareable :) Damn...I'm talking too much...good luck!
pro tip loosen the valve on the engine crane, lift it with your hands, tighten the valve again and bobs your uncle and all that crap. alot faster way to lift the arm
Yo I was hoping I’d see Brian’s e46 get swapped one day. I’m literally going to be taking every bit of notes that I can lol I have a 323 and FCP euro has had every part I needed and at great prices.
There's my friendly daily video for wake and bake. Thank you Patreon
Drew was so fried talking about his pizza pockets 😂😂
Grammy makes the best pepperoni rolls!!!!
Facts yo😂
hell look at bhall he high afk
AT LEAST he remembers what he's talking about... unlike me ill pause in the middle of a conversation and be like ... yeah its gone..... lol..
@@cameronklim7968 I don't even need to pause sometimes, I'll be mid thought and I can literally feel it fade away and completely forget what it was.
Missed drew, need to pull engines more often.
What's more baked? The pizza bite or drew? I couldnt tell.😂🍁🌲🔥
What’s the point of this.
Fact Spitter just goofin around.... you have no sense of humor if you didn’t giggle... we all smoke here
ROFL. that heavy metal Brian clip was amazing.
Heavy metal 😂😂😂😂
Brian when working on jimmys cars: SEND ITTTTT
Also Brian when it’s time to take apart his bmw: 😀
Grammy Oakes makes the finest most potent edibles in the land. Drew is damn near comatose in the wheelchair
She does!!!!LOL
Thank you
loved this episode of tucker doing the engine swap good work tucker
Bhall is the man!!! So happy he is getting some much needed push for a better car
Brian’s e46 is one of my fav channel cars. So basic but dope at the same time. Glad to see some more vids of it!!! Much love dude
I love how Drew is always there for pulling engines.
Damn B must be sooo tired with how red his eyes are... definitely no other reason lmao
Fans sent him a million levelers. Uses ratchet straps.
Some people prefer straps/chains. All about what you’re used to and comfortable with
7:46 “wow it’s like communism” 😂😂😂😂
4:20 bruuh taking off the front clip with headlights and everything was the power move i needed to know about
Facts!!
Bringing Rjay on was 1000% a great move. Love him and his energy!
CONGRATS B , she's gonna Be a certified ripper. You put inn ALOT of work on EVERYTHING inn & out of the shop.
So when are we going to get a Jimmy O car giveaway to fund some paint 🥵
Great group engine pull! Hope the new engine is just as reliable for Brian!
“Wow Brian it’s immaculate under here, yeah dude this thing is mint” chipping away at the frame rails😂
we need more metal montages that was epic
Finally B gets hooked up. Need to throw a turbo in there while it's apart. Doesn't have to be big just a little spooly boy to wrap up fast and blow out like another 40 hp
So glad for him !!!! He deserves it 100% !!! Love it !
i can't thank you enough for uploading at lunch time. i just sat down with food to see a new video
It's the OG m50 turbo himself 🙌🏼
Tariq Adams 🙏🏽🙏🏽 i appreciate you
Enjoying the screentime Carter's IS300 is getting at 4:42 😍
thank goodness for your videos. today especially because i’m high af before my diploma and need inspiration
Go to Lowe’s and get some small rubber pipe caps. They are perfect for capping water pumps so you don’t have coolant pissing on the floor as you pull an engine
So good to see jimmy doing something for B-hall
The rock music when B was cutting his exhaust was on point keep up the fire content
Wow, good timing. I'm doing this same swap in a few weeks🤯
Make sure to get a turbo and s52/s54 OFH to get oil feed for it
Good luck
Don't mind me. Just commenting to bump you up in the recommendations.
BTW loving the Bimmer content. Please save the e30 😞
I have a sneaking suspicion that jimmy doesnt just not swear to stay monetized, he doesn't swear in his videos because grandma oakes is watching 🤣 but i mean they seem like the kind of crew that has no need to drop F bombs all the time
Hyped to see Brian's car get some love
Please do more content I own a e46 and wanna learn more Jimmy do your magic on it keep up the sick videos like this
Really appreciate the Tucker content. Thanks.
Love some Jimmy O in the morning Patreon gang out here
looking at that belt and pulley setup on the bmw makes me apreciate the KA. much less mess
It blows my mind how every video is so good!
FINALLY! cant wait to see what the little e46 can do in the future! love you guys!
I got a e46, so I cant wait for the next episode!
Jimmy’s supported by some of the best women in the game from what it sounds like and what we see.
Wish these were 20+ minutes!
Nobody:
Jimmy while Brian Slicing and Dicing the bmw: 😃👍🏽
Yes Rjay, Wrigley's: Believe It Or Not
Finally he been ready for more power in the drift missile daily... He has progressed so much
Sick sick I love the E46 lol I just bought myself a ZHP. So I’m happy to see this 🤙🏻
Can’t wait to see this finished looks awesome!
Love this! More Bryan E46 content, please!
Make sure you use an MS43 DME super easy to tune with RomRader TunerPro etc just get the updated coils
Surprised Brian didnt get the M56 SULEV metal valvecover that has the CCV/PCV built in !
Though ZHP came with MS45.1 it uses a 5pin maf not 3 pin and has less open source support for tuning and flashing
So excited to see this build, I have a very similar engine with same mods and E85. Excited to see the dyno on this :)
enjoyed the vibes of this one, reminds me a lot of doing bmw stuff with all my friends :):)
You need to do some wiring when you got the engine in. For the drive by wire and the starter
Been waiting for e46 content for so long!
The metal moment with the sawzall and the hair was fkn magical. 🤘😖
Love vids with brians cars in em!
was i the only one waiting for RJay to say "ITS A BOY!!!" when they pulled the motor
Brian deserves it , big beauty
Love this! Please more E46 content!!!
Throw the turbo from the red e36 and a link ecu on B's e46! That'd be fun!
I really miss my e46 318ci with a S54 swap 😓🏁😍 Great tracktoy!
I'm a B30-guy for 3 years and I'm tuning them on MS43 so have to say something :) ZHP cams are almost the same as stock. This is the difference like putting in Hondas B18C4s to B16 - like none :) I have b30 with m52 manifolds, part of intake tube welded, 70mm single back exhaust and tune - such setups in Poland are making around 24x PS and around 320Nm (235tq) - AT THE CRANK. With m50 intake you can count on 25x PS. When this car will show 23x-24x PS AT WHEELS it means, that dyno reading between Poland and States are VERY different :D When such will be - I would love to see some 0-140 or 0-160km/h runs (I have 3,38 diff) and then we will see does this is really faster as should be. Nevertheless, really waitig for the final cause I'm in love with my missle and would love to compare it (even on vids) what are the difference between us. I had it in sedan too, but crashed it, so everything will be compareable :) Damn...I'm talking too much...good luck!
10:49 The Face A Hero Makes Before He Saves The Day
Deadly Artifactトラビス what was the noise? 🧐
The outro never gets old...
That tire stack flex
pro tip loosen the valve on the engine crane, lift it with your hands, tighten the valve again and bobs your uncle and all that crap. alot faster way to lift the arm
Oil pump nut/shaft reinforcement, a must do when engine out.
Most definitely
Surprised he didn't go for an upgraded oil pump altogether along with a spooly boi on the side
And S54/S52 oil filter housing
These M5x engines are literally legos lol
Apparently zhp engines don’t have that issue like regular ones can’t confirm. Still a good idea for peace of mind.
I feel like I remember you saying something about not liking WV but that WV pepperoni roll looked like it was doin work 🤣
Can't go wrong with the m54 b30 engine done a few drift days in mine bm the 220ft-Ib at fly is enough
Who’s IS300 is that in the back? I always see it.
was also wondering...
Gammy Oaks must be a WV native. Home of the pepperoni roll.
Great lunch time watch.
Brian is gona have some power now
The m54b30 is a great engine 💪
Loving the vibe in this one today 👊👊🍍
If there's any plans for turbo in the future use the ms43 ecu and harness ms45 is a pain for turbo applications
man, we need to fund a turbskie setup for the boy b haul
I was hoping for a S54, but this isn't a bad choice. Definitely a more reliable choice.
I miss Drewtube, love when he makes an appearance.
Hell yeah brian! I got a 03 imola over alcantara zhp. Gonna be a great oem upgrade over the M52tu
Sick sick loving the content 👌🏻🔥🔥🔥
Google ms4x for m54/m52tu tuning, good luck!
Daily is an F30 340i M performance with B58
Why do I feel like RJay is the type of dude to like the sound of a straight piped KA
He is 100%... dude has the worst taste in cars/upgrades lol
B hall Smokes THAT GOOD SHIT.
Iv got me an almost b ride. With the exception mines a 325i and silver with the factory m54 2.5
The little edit with Brian’s hair was fucking hilarious
If you could do a whole mini series on the swap that would be awesome looking to do the same swap for my E46 with the exact same car
Step1. Engine swap +50 HP + Fatter curve ☑️
Step2. Nitrous 50/75 shot☑️
Step3. More TUCKER! Tucker needs his own channel!☑️
YESSS MORE BMW STUFF since i can't work on my own bmw bcz of quarantine :(
Love the bimmer content! Keep it up!🔥
Yo I was hoping I’d see Brian’s e46 get swapped one day. I’m literally going to be taking every bit of notes that I can lol
I have a 323 and FCP euro has had every part I needed and at great prices.
This video is what the channel is all about 🤣 🔥
This is a genius build, thank yu for showing it, hope yu don’t mind me copying it 😬
Keeping the fly by wire or going electric throttle? Im dropping a m52tub28 in my e30 but using the rotating assembly from a 330i and intake cam
Yesssss love the BMW content
OMG BMW CONTENT!!!! 😍😍😍😍
Good to see ole Tuckmaster 🐶
It looks like someone rocked Jimmy lol
Great work!
Love the E46 videos