Nice job. I am about 3 months behind you in my build. I just finished editing the first video for mine and am now finishing up the frame so I should have that ready soon. The foam is great to work with because its so light, but as you know, it is frustrating too because it's so easy to dent and crack.
Thanks Brian. I have used 80/20 on some past projects, but that seems a little overkill for any of my needs on this project. Gotta keep the weight down!
I think I have watched and subscribed to all your video's. I was wondering why you didn't use Polyester resin that they use on boats, because it is 1/2 the price of Epoxy. Does it melt the foam where the Epoxy resin does not? What is your experience? Could you share your source of Fiberglass cloth and what ounce did you use? I was thinking of using the 25 oz - 1708. One other question, to bend the 2" foam how deep were your cuts and what spacing did you use? Would you mind putting these answers in your notes? It is hard to pick up these details from your video. By the way that is a gorgeous job you did. Another ? It looks like you put a wood floor in. What thickness was that plywood and did you use it in any other areas of your build besides the wood in the roof (4 places) ?Does insulation go underneath the plywood floor? Any in your front rounded wall for support or strength? Did you fiberglass on the inside? if so how many coats of cloth?
Thanks for watching! Your questions are all covered through the videos in the build series and I would recommend watching them all if you are interested in building something similar. I will briefly cover your questions below. Polyester resin does melt the foam, and is stinky/nasty to work with. 6-8 oz cloth in 1-3 plies throughout. Thayercraft.com The kerf cuts for the foam were approximately 1.5" deep and spaced at an inch. Run a test piece and decide what you like best. floor is 1/4 ply over the top of 2" foam like the rest of the build. I added it for impact resistance and durability. The front radius is for aerodynamics, and is incredibly strong as a bonus. The entire camper has fiberglass inside and out.
"We replaced the bottom of this boat with a screen door!" The roof just had a few imperfections, Using the same paint, just adding another coat was a fine solution. Thanks for watching!
@@ThatJakeWorldWidewell said , but what size of fuse is that from the fuse box to your power bar. Great video I'm gonna adopt a whole lot of info from your builds. Very impressive.
Lithium batteries don't like extreme temperatures. Below 32 and above 130 are the danger zone that will cause permanent damage and extremely reduced life. I sleep soundly while snuggling with my $500 battery.
Hey Jake,been watching your build and very impressed with it,I'm think8ng of doing something similar and was just wondering what are you using to bond your panels together and also along the joints?.thanks in advance Errol from Scotland.
Hey Errol! I use the same epoxy for bonding, but thickened with 3M glass micro balloons or "micro" there are lots of epoxy thickeners on the market that you could substitute if micro balloons aren't available in Scotland. Thanks for watching!
Thanks Pete! I never did a tally of total cost or time. My best estimate as it sits is somewhere around 4k doll hairs and 500 hours. It certainly could be done for less cost and in less time, but that kind of wisdom comes from the build experience itself.
Hi, I watched almost all the video's and it helps me a lot with building my own Quadcamper. I am currently building a recumbent quad and on the back i am going to build a camper part where i can sleep in. I first wanted to build from wood, but because of the weight i wanted to switch to foam. Still i wanted to use a lot of wood. After seeing your video's, I see that i can build it a lot lighter and all from foam with a little bit of wood. This way i can safe a lot of weight and make it so i can remove it my self from the quad without needing any help. Also is the isolation better and can i make it in the shape i want a lot easier. I have only one question. How thick is the foam you use? I probably missed it in one of your video's. Greetings Emiel
Don’t mind me. Just binge watching.
Wow, it's amazing! The roof looks terrific! I enjoy seeing all that you do!
Glad you enjoy it! Thanks for watching Terry!
Heck yeah Jake. Once you get the juice flowing it's a whole nother world.
I'm stoked! Been busy with a work project, but cant wait to get out in the next few days.
Looks good. Can't wait to see how it performs!
Thanks Mo, I think I'll take the blender along this week!
All that electrical stuff is making me hungry for barbecue. Sweet little set up you got there with all the bells and whistles.
Annnnd now I'm craving brisket. Thanks for watching!
Watching you drill holes in the roof had me puckered
SAME!
I’ve been looking at these foamies.. I’m building a teardrop camper right now and pretty sure we live in the same area!
It's a small world. I checked out the teardrop build on your channel cool project.
Once you go foam, you never go back!
@@ThatJakeWorldWide I bet you’re right. Let’s meet up sometime so I can check it out!
I'm in! I'll get in touch on instagram.
Nice job. I am about 3 months behind you in my build. I just finished editing the first video for mine and am now finishing up the frame so I should have that ready soon. The foam is great to work with because its so light, but as you know, it is frustrating too because it's so easy to dent and crack.
I think my least favorite thing about working with the foam is mess it makes. I just checked out you project, looks cool!
Looks good!
Thanks!
Looking good Jake,electric blanket or mini heater, l mean besides the coffee maker...lol
Diesel heater install soon! Electric blanket is tempting though!
Nice job Jake. Have you thought about using any 80/20 extrusion for a mounting track inside. Looks great.
Thanks Brian. I have used 80/20 on some past projects, but that seems a little overkill for any of my needs on this project. Gotta keep the weight down!
I think I have watched and subscribed to all your video's. I was wondering why you didn't use Polyester resin that they use on boats, because it is 1/2 the price of Epoxy. Does it melt the foam where the Epoxy resin does not? What is your experience? Could you share your source of Fiberglass cloth and what ounce did you use? I was thinking of using the 25 oz - 1708. One other question, to bend the 2" foam how deep were your cuts and what spacing did you use? Would you mind putting these answers in your notes? It is hard to pick up these details from your video.
By the way that is a gorgeous job you did. Another ? It looks like you put a wood floor in. What thickness was that plywood and did you use it in any other areas of your build besides the wood in the roof (4 places) ?Does insulation go underneath the plywood floor? Any in your front rounded wall for support or strength? Did you fiberglass on the inside? if so how many coats of cloth?
Thanks for watching! Your questions are all covered through the videos in the build series and I would recommend watching them all if you are interested in building something similar. I will briefly cover your questions below.
Polyester resin does melt the foam, and is stinky/nasty to work with.
6-8 oz cloth in 1-3 plies throughout. Thayercraft.com
The kerf cuts for the foam were approximately 1.5" deep and spaced at an inch. Run a test piece and decide what you like best.
floor is 1/4 ply over the top of 2" foam like the rest of the build. I added it for impact resistance and durability.
The front radius is for aerodynamics, and is incredibly strong as a bonus.
The entire camper has fiberglass inside and out.
I would have rolled on Flex Seal on the roof stuff is great
"We replaced the bottom of this boat with a screen door!" The roof just had a few imperfections, Using the same paint, just adding another coat was a fine solution. Thanks for watching!
@@ThatJakeWorldWidewell said , but what size of fuse is that from the fuse box to your power bar. Great video I'm gonna adopt a whole lot of info from your builds. Very impressive.
Think I would have found room in the engine compartment for the battery, saved my storage/living room.
Lithium batteries don't like extreme temperatures. Below 32 and above 130 are the danger zone that will cause permanent damage and extremely reduced life. I sleep soundly while snuggling with my $500 battery.
Great install.
You're almost ready for the Zombie Apocalypse.👍
Thanks Patrick! Good thing too, it feels like it could be any day now!
Hey Jake,been watching your build and very impressed with it,I'm think8ng of doing something similar and was just wondering what are you using to bond your panels together and also along the joints?.thanks in advance Errol from Scotland.
Hey Errol! I use the same epoxy for bonding, but thickened with 3M glass micro balloons or "micro" there are lots of epoxy thickeners on the market that you could substitute if micro balloons aren't available in Scotland. Thanks for watching!
Nice build. I’m thinking of doing something similar.
What was your cost to build and how many hours do you think you have into it.
Thanks Pete! I never did a tally of total cost or time. My best estimate as it sits is somewhere around 4k doll hairs and 500 hours. It certainly could be done for less cost and in less time, but that kind of wisdom comes from the build experience itself.
Hi, I watched almost all the video's and it helps me a lot with building my own Quadcamper. I am currently building a recumbent quad and on the back i am going to build a camper part where i can sleep in.
I first wanted to build from wood, but because of the weight i wanted to switch to foam. Still i wanted to use a lot of wood.
After seeing your video's, I see that i can build it a lot lighter and all from foam with a little bit of wood.
This way i can safe a lot of weight and make it so i can remove it my self from the quad without needing any help.
Also is the isolation better and can i make it in the shape i want a lot easier.
I have only one question. How thick is the foam you use?
I probably missed it in one of your video's.
Greetings Emiel
Hey Emiel thanks for watching. The foam I am using is Owens Corning formular 150 in a 2" thickness. Good luck with your project!
I want to know what a quadcamer is!@@ThatJakeWorldWide
@@jamesbostick3936 Im not sure man. Some kind of bicycle powered contraption is my best guess.
I say this with love, but cyclists are an odd bunch!
I don't know this might be a dumb question but how strong is that camper
Very