😇 ruclips.net/user/lastend1 Subscribe Found a Bafang Deal with the lowest price ever $479 with coupon s.click.aliexpress.com/e/_DEk1rZN $20 OFF For orders over $200 Code: 【IFPNRAX】 1000w BBSHD Kit (The one I got) 🛒Amazon amzn.to/3FhVmsF 750w BBS02 Kit 🛒Amazon amzn.to/3f1v3Mm 500w BBS01 Kit 🛒Amazon amzn.to/3ssMY1J 1000w M625 Kit 🛒Amazon amzn.to/3XwmQkQ Electric Bike Batteries 🛒Amazon amzn.to/3ALQuZH Shift Sensor 🛒Amazon amzn.to/3Whm9eH Programming Cable 🛒Amazon amzn.to/3g3olGi Extra Cable 🛒Amazon amzn.to/3g2afVG Twist Throttle 🛒Amazon amzn.to/3TrlrJ2 Bafang Bottom Bracket Spacers 🛒Amazon amzn.to/3UaQZ6x 🛒Bike Arm Remover and Bottom Bracket Remover: amzn.to/3ErAM88 🛒42 Tooth Chain Ring With 20.5 mm offset: amzn.to/3EBVP8l
Good job on the video. I put a BBS02 in my marlin 7. Could not be more pleased with the results. I’m sure you will enjoy it. I just posted a 1000 mile review on it, take a peek and see what you think after 1000 miles. I will definitely be following to see any more tips that you have.
Glad to see you got it installed. 👍 I'm curious about how much it ways including the battery. The 2 stroke bike kit is 21lbs 8oz and my 4 stroke build is 22lbs 1oz . How long it takes to change the wheel absolutely matters .
15 pound Kit plus up to 26.5 in batteries and charger weight ( ruclips.net/video/kzZ_fG9IazY/видео.html ) if I carry all current 3 batteries. So 41.5 pounds. Flat range of 160 miles if helping it (BS-ing here. don't have data for mid range yet. 160 is what me+hub could do.) Gas is king in energy to weight, lower cost, and in recharge time. I'm always waiting for the next generation of batteries! Then there solar. Each 100w panel is 5 pounds. I have 2 but really 4 would be better. To bad I'm not light like when I started riding 3-ish years ago. Lol just joking, I'll keep my 40 added pounds of human body weight.
Thanks. Nice to finally know that evil little screw name. amzn.to/3EFNsrd s.click.aliexpress.com/e/_DBOsxtp For reference its that screw on the magnet on the back wheel.
Really informative videos. I have a couple of Chinese electric scooters with 60v20ah batteries. What is the best way to set up solar panels, controller and plug to charge them up in 5 hours or less?
Wow price has came down $681.46 amzn.to/3xyjZjh Found a Bafang Deal with the lowest price ever $479 with coupon s.click.aliexpress.com/e/_DEk1rZN $20 OFF For orders over $200 Code: 【IFPNRAX】
also, do you need to do the brake sensors like that? Or can you swap out the brake levers with the ones from the kit. I don't really like the magnet sensor idea
Only hard part about the gear sensor is getting the cable back on the derailleur at the same tension. Add a mark to show where the cable should be. I had to use the magnet brake sensor because marlin 7 has Hydraulic brakes, and the kit came with the cable version, but after searching I found a better looking option. amzn.to/3WIYlAZ These are Bafang hydraulic levers.
My back would break before the pack. I carry the batteries many different ways. Lately I've been using a solar trailer. ruclips.net/video/Gr-8B8ytKEs/видео.html
what generation of marlin is it? I tried to mount the TSDZ2 to this bike but it does not fit because of the cable routing. Do you have a welded down tube below the bottom bracket?
7 generation 2022. For the bottom weld I did do minor filing to make it 1-2mm smaller in the middle (More flat). I did have to do this to the bottom Bracket. ruclips.net/video/7wikIUxtnQQ/видео.html
I've started trying to work with prebuilt e-bike companies as well. Making things yourself can be difficult. Problem is many prebuilt e-bike can't charge and discharge at the same time. For those 2 batteries are needed. One for riding while the other recharges from the panel.
@@Eric_Tennant yes, that's why I am going to get 2; 3 extra batteries, Eric trying to talk on here isn't working for me, I feel like I can't say what I need to, seriously, people are harsh and really mean sometimes/ most of the time I'm finding out and I thought that being a member I'd be able to talk in a private setting, and it doesn't look like I don't know why I was hoping that; doesn't look like that's going to happen, man I'm set on an very good dependable bike with even a huge tuff motor and riding across country out there but man I'm not going to be able to do a worthy build my self, if I hadn't had the stroke on top of the severe fractures it would be a different story. Man Eric, look; if I sent you the money for a good build and id really need fat tires because I really need the cushion " because of the pain in my back and neck, cushion and Better than normal shocks and big soft seat is going to play a huge part in making my last wish attainable" I can't say on here what's going on with my health, I really can't; I don't even want to think about it. I just want to make, hopefully my year the best dream I've ever had come true.. it's more than just a Cross country trip for me,if I can just say that.. man I don't care what I have to be charged, and I know it's not going to be cheap but seriously I've got ENOUGH money for a heck of a build and pay someone good to build it for me.y whole intention was to build it myself and then ride the whole way but I don't think it'll work out like that, God it's hard to speak so freely about what's going on. And maybe it's not going to work out anyway, but I don't know,I really want to talk to you, I feel like YOU were the one I was supposed to talk to, yeah it's strange, bit like I said I can't talk right here, theirs no way
😇 ruclips.net/user/lastend1 Subscribe
Found a Bafang Deal with the lowest price ever $479 with coupon s.click.aliexpress.com/e/_DEk1rZN
$20 OFF For orders over $200
Code: 【IFPNRAX】
1000w BBSHD Kit (The one I got)
🛒Amazon amzn.to/3FhVmsF
750w BBS02 Kit
🛒Amazon amzn.to/3f1v3Mm
500w BBS01 Kit
🛒Amazon amzn.to/3ssMY1J
1000w M625 Kit
🛒Amazon amzn.to/3XwmQkQ
Electric Bike Batteries
🛒Amazon amzn.to/3ALQuZH
Shift Sensor
🛒Amazon amzn.to/3Whm9eH
Programming Cable
🛒Amazon amzn.to/3g3olGi
Extra Cable
🛒Amazon amzn.to/3g2afVG
Twist Throttle
🛒Amazon amzn.to/3TrlrJ2
Bafang Bottom Bracket Spacers
🛒Amazon amzn.to/3UaQZ6x
🛒Bike Arm Remover and Bottom Bracket Remover: amzn.to/3ErAM88
🛒42 Tooth Chain Ring With 20.5 mm offset: amzn.to/3EBVP8l
New subscriber binge watching
Thanks for subbing!
That's amazing! This is what I have been looking for!
Glad I could help! Been loving to motor myself.
Good job on the video. I put a BBS02 in my marlin 7. Could not be more pleased with the results. I’m sure you will enjoy it. I just posted a 1000 mile review on it, take a peek and see what you think after 1000 miles. I will definitely be following to see any more tips that you have.
Thanks, will do!
How many watts is your motor
Glad to see you got it installed. 👍 I'm curious about how much it ways including the battery. The 2 stroke bike kit is 21lbs 8oz and my 4 stroke build is 22lbs 1oz .
How long it takes to change the wheel absolutely matters .
15 pound Kit plus up to 26.5 in batteries and charger weight ( ruclips.net/video/kzZ_fG9IazY/видео.html ) if I carry all current 3 batteries. So 41.5 pounds. Flat range of 160 miles if helping it (BS-ing here. don't have data for mid range yet. 160 is what me+hub could do.) Gas is king in energy to weight, lower cost, and in recharge time. I'm always waiting for the next generation of batteries!
Then there solar. Each 100w panel is 5 pounds. I have 2 but really 4 would be better.
To bad I'm not light like when I started riding 3-ish years ago. Lol just joking, I'll keep my 40 added pounds of human body weight.
@@Eric_Tennant thank you great reply 👍 i was curious about it since I received the motor.
Anytime!
Thanks!
No problem!
Hi. Is this the trek marlin 7 gen 2?
its a tamper proof torx screw. Funny, Dyson uses them in their vacuums but every one sells the tool.
Thanks. Nice to finally know that evil little screw name.
amzn.to/3EFNsrd
s.click.aliexpress.com/e/_DBOsxtp
For reference its that screw on the magnet on the back wheel.
Thanks!
You bet!
Hey Eric, from what I'm seeing; Amazon doesn't sell trek bikes? Do you know if I'm just not putting it into the search right? Or what?
Yea Trek has no listing on Amazon. You have to find a local bike shop. I think they have them for sale on there website.
Really informative videos. I have a couple of Chinese electric scooters with 60v20ah batteries. What is the best way to set up solar panels, controller and plug to charge them up in 5 hours or less?
here a few videos on the subject that I have done. ruclips.net/p/PLl_xMxP2SGHNzSTOWNvncO8imznIxDNq1
❤❤❤ hello. How much does that kit cost in your country today? Thans
Wow price has came down $681.46 amzn.to/3xyjZjh
Found a Bafang Deal with the lowest price ever $479 with coupon s.click.aliexpress.com/e/_DEk1rZN
$20 OFF For orders over $200
Code: 【IFPNRAX】
very helpful video. I'm converting my marlin 5 soon. just worried about the gear sensor part. any tips?
also, do you need to do the brake sensors like that? Or can you swap out the brake levers with the ones from the kit. I don't really like the magnet sensor idea
Only hard part about the gear sensor is getting the cable back on the derailleur at the same tension. Add a mark to show where the cable should be.
I had to use the magnet brake sensor because marlin 7 has Hydraulic brakes, and the kit came with the cable version, but after searching I found a better looking option. amzn.to/3WIYlAZ These are Bafang hydraulic levers.
Do you wear the battery in the back pack?! And what if you fall off the bike?
My back would break before the pack. I carry the batteries many different ways. Lately I've been using a solar trailer. ruclips.net/video/Gr-8B8ytKEs/видео.html
Es mucho trabajo y hay que tener conocimiento y herramientas
Es cierto, pero al final da sus frutos. También obtienes una bicicleta no regulada que puede ir más rápido que las de las tiendas.
Will this kit fit on a 27.5 Carrera vengeance
Yep
How do I get a 750 w sticker without buying that motor?
amzn.to/3N92I54
what generation of marlin is it? I tried to mount the TSDZ2 to this bike but it does not fit because of the cable routing. Do you have a welded down tube below the bottom bracket?
7 generation 2022. For the bottom weld I did do minor filing to make it 1-2mm smaller in the middle (More flat). I did have to do this to the bottom Bracket. ruclips.net/video/7wikIUxtnQQ/видео.html
@@Eric_Tennant you can provide an email. I will send you a picture of my problem.
I meant where the wires come out.
Sure on my channel about page it has a contact button that will list my current email.
Does this kit fit 60mm bottom bracket?
yep
@@Eric_Tennant how?
8mm in spacers
@@Eric_Tennant do you have any videos regarding this?
Nope. It is simple to do just add 2 of these ( s.click.aliexpress.com/e/_DEcs0SB ) on each side of the bottom bracke when installing the Bafang.
its asking on amazon size: alot of option
One is the front chain ring size. I went with a 42t for speed. The other option is battery size. The higher the number the more range you will have.
Do you really just wear the battery? That seems..correct lol
No. The power cord is a pain that way.
I can't find a bike
Any bike will do. MTB are best.
Bret ????
Lol was a commenter that wanted to quote me the law on this video. ( ruclips.net/video/ormiz2ARESk/видео.html )
Is this a medium size frame ?
XL Frame
Feeling rather discouraged
I've started trying to work with prebuilt e-bike companies as well. Making things yourself can be difficult. Problem is many prebuilt e-bike can't charge and discharge at the same time. For those 2 batteries are needed. One for riding while the other recharges from the panel.
@@Eric_Tennant yes, that's why I am going to get 2; 3 extra batteries, Eric trying to talk on here isn't working for me, I feel like I can't say what I need to, seriously, people are harsh and really mean sometimes/ most of the time I'm finding out and I thought that being a member I'd be able to talk in a private setting, and it doesn't look like I don't know why I was hoping that; doesn't look like that's going to happen, man I'm set on an very good dependable bike with even a huge tuff motor and riding across country out there but man I'm not going to be able to do a worthy build my self, if I hadn't had the stroke on top of the severe fractures it would be a different story. Man Eric, look; if I sent you the money for a good build and id really need fat tires because I really need the cushion " because of the pain in my back and neck, cushion and Better than normal shocks and big soft seat is going to play a huge part in making my last wish attainable" I can't say on here what's going on with my health, I really can't; I don't even want to think about it. I just want to make, hopefully my year the best dream I've ever had come true.. it's more than just a Cross country trip for me,if I can just say that.. man I don't care what I have to be charged, and I know it's not going to be cheap but seriously I've got ENOUGH money for a heck of a build and pay someone good to build it for me.y whole intention was to build it myself and then ride the whole way but I don't think it'll work out like that, God it's hard to speak so freely about what's going on. And maybe it's not going to work out anyway, but I don't know,I really want to talk to you, I feel like YOU were the one I was supposed to talk to, yeah it's strange, bit like I said I can't talk right here, theirs no way
Be aware this kits only fit older bikes
It will fit new bikes if it has the same bottom bracket size.
I use the bafang 73mm on the 2022 Schwinn Taff from Target 🎯
ruclips.net/user/shortsZsgwOJNQUr0?si=GScBU4tim6Zko4Oe