Это видео недоступно.
Сожалеем об этом.
Nintendo Switch RAM Overclock GUIDE to 1996.2mhz - 100% Safe
HTML-код
- Опубликовано: 13 авг 2024
- Installation and setup guide for the oh so secret Erista Extreme Ram Overclock to 1996.2 MHZ, along with all the necessary steps and utilities.
Includes: Tesla menu, a modified Sys-clk, and Status monitor overlays.
To allow for easy access to Overclocking, CPU/TEMP/FPS monitoring, and cheats.
Switch v1 unpatched Erista model.
References:
github.com/KazushiMe/Switch-O...
I take no credit for the creation of these tools and databases - All credits go to the original authors and developers for the files below. My sincere thanks to all those on Discord who helped me get this up and running.
Links to all files: NOTE: ALWAYS USE THE NEWEST FILES!!!
Tesla - gbatemp.net/threads/tesla-the...
Sys-clk uncapped - github.com/jope82/sys-clk-unc...
Status monitor - github.com/masagrator/Status-...
NX-FPS - github.com/masagrator/NX-FPS/...
SaltyNX - github.com/masagrator/SaltyNX...
Sigpatches - github.com/ITotalJustice/patc...
RAM-OC-Patch - github.com/KazushiMe/Switch-O...
1862mhz kip file - drive.google.com/file/d/1hhGL...
1996mhz kip file - drive.google.com/file/d/1aGXC...
Socials:
Reddit@ / thorhax04
Instagram@ canjapan?h...
Brand New Discord@ / discord
----------------------Contents of this video-----------------------------------
0:00 - Intro and overview
3:06 - Setting up the Tesla menu
5:30 - Sys-clk-uncapped
7:22 - Status monitor and FPS counter
8:56 - Sigpatches
10:05 - Switch-OC-Suite
18:06 - Booting from Hekate
20:23 - CFW settings and OVERCLOCK
27:38 - Outro
![What's on my CFW Switch - [Part2] Tesla menu, sysmodules, overclocking, cheats, 60FPS hacks](http://i.ytimg.com/vi/cM29emEdtxE/mqdefault.jpg)
![Finesse2Tymes & Og Boo Dirty - Real Recognize Real [Official Music Video]](http://i.ytimg.com/vi/3xb4bl5PWF8/mqdefault.jpg)
![Megan Thee Stallion - Mamushi (feat. Yuki Chiba) [Official Video]](http://i.ytimg.com/vi/OdxSbc0ap-s/mqdefault.jpg)
Load emuMMC through Hekate like this:
{------ Atmosphere ------}
[Atmosphere FSS0 EmuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
kip1=atmosphere/kips/loader.kip
emummcforce=1
icon=bootloader/res/emu_boot.bmp
{}
THIS is important, you can even use sys-clk with the newest firmware 14.1.2
Hi, what if I would like to load fss0 sys with this overclock?
@@baozerbui Never load sys with dram overclocks, it can cause nand corruption.
dude... I know this is an older video but like... I wish I could have you making guides for everything. I don't think I've even had masters-level professors even back in college that could explain things in detail yet concise and to-the-point as fluidly as you are able to in a 30 damn minute video. Bravo man. Do the education professional field a favor and get some kind of teaching degree (kidding but... not kidding?). Anyways thanks a ton for making this guide. Keep up the good work amigo o/
Rarely do I comment on videos, but I just wanted to let you know the info in this guide was the last bit I needed to get my sys-clk software configured to show options beyond 1600MHz. Maybe because newer versions are out now that it's been a few years but I didn't need to get rid of that "minerva" file for higher clocks to work correctly. I really appreciate you putting this together.
Also, I didn't know the RCM Loader was a thing. I need to get one!
Switch OLED DDR4 chips also happened to be binned for 2131.2MHz, so if you happen to know someone who's experienced with soldering in modchips, you'll also find the Switch OLED to be the most straightforward to OC.
Man, I tried to get a modded OLED last month... I lost my money instead....
I give up on that now. Erista 4 life.
The oled fan is "nerfed" compared to v1 and v2
@@TheDesconection really?
@@vakdav2582 yes, the fan and heatsink is smaller
I got one, how do i overclock it that high
Dude, do an updated version of this! Switch OC Suite went up to 1.4 and averything changed :/ You're awesome, thanks!
So does this not work anymore?
No longer works for me with erista on 16.0.3 / AMS 1.5.4
would like to see an updated guide. thanks for the vid regardless
Will do when I get back in town. Thanks for the suggestion. I should do updates for others as well.
It’s still the same worked for me
thanks for this tutorial, got it working on my OLED switch.
I can't believe I am the only one who has done everything step by step but all I get is black screen when boot to emummc...
Tell me more about your setup?
Syscfw? emuMMC? Newest atmosphere? And nearest overclock patch?
@@FinalByteGaming Yes to all. And as I wrote I boot to emummc
Same thing happened to me. So it not alone. Some switches can't handle 1863, try 1732
This is next level, and makes the switch into that switch pro. Witcher 3 is smooth and native res at 768mhz GPU and 2000mhz mem. Nintendo should make this official and get two more years out of this crazy hardware.
Also nothing explodes without having it plugged in the charger lol.
May I know how about battery life compare to without overclock?
They won't, eventhough it seems safe nbow, it still wil degrade your hadrware faster in the longer term, I doub Nintendo used the highest quality of board components, like capacitors/vrms whatever. SO even if it does not seem to thermal throttle or anything, something might still degrade, not to mention battery life suffering, which is their no 1 priority as well. Also they likely cannot garantuee this works for every Switch made, as binning might mean some Switches gpu/cpu may not run as high, or the RAM in some Switches become too unstable at 2k mhz.
@@TerranigmaQuintet yeah. You need proper ram timing to be stable at 2k+ mhz.
Thank you kind sir! Works for me. I just did some minor tweaks on my configuration then follow your instructions. Thanks again!
Awesome!
@@FinalByteGaming forgot to ask. will this method will get you ban? I haven't used any type of overclocking before with my clean sysnand because of the risk of getting ban.
@@pinoygameroom2470 I only use emuMMC and I keep it offline so there is 0 risk of a ban.
Please, it prompts me that "sys-clk is not running" please make sure it is correctly installed and enabled. any help?
See my pinned comment. You need to add that to his Hekate ini and boot using it. Not fusee
Hey, so the latest version of the loader says that this overclock is unsafe for Erista and has an 1862.4MHz limit. I'm running a stress test now to see if it will cause any errors (I don't wanna corrupt a game save). From what I can tell though, the developers have removed the functionality because they have deemed it as unsafe.
Edit: Actually, it looks like this is possible but it isn't enabled by default and is still classed as unsafe. It needs to be manually patched back into the loader by using the python script. The DRAM voltage can also be adjusted, with some overhead for an increase.
Edit 2: It ran 248 loops for about 4 hours before I manually cancelled it and decided I am satisfied that it's stable.
Here's hoping when I install python that I find my ram is binned another 10% higher at least.
I'm really glad you made this comment anymore, and that you do the stress test see for yourself.
When this mod first started becoming available to the public there was a lot of drama going on in the community regarding it for absolutely no reason. The developers stated that people were overvolting their systems and frying their switches, but unless you have advanced knowledge can't easily modify the ram or overclocked do such things. I don't even know how to do that.
Whenever someone in the forum started asking questions about how to get the mod working on their Erista, everyone just started flaming them saying not to overvolt their Arista they're going to fry it because they overclock their system too high. But no one was talking about actually doing that, all they were asking was how to get the ram modification working. Eventually I could figure it out, so I decided to put the video out there.
I haven't updated anything on my switch to 14.0 because I'm worried about compatibility with this.
Games run so much better thanks to this ram overclock, especially when it comes to 60 FPS mods. Skyrim unstable 60, but after I enable this I get a locked 60fps experience.. it's wonderful.
I've been checking daily on the GitHub see when a new version releases, once that's out I'll see you about updating my system and perhaps doing an updated atmosphere update guide.
On a side note, my channel's been quiet because I thought covid in February, recovered from it and then my real life work got very busy.
Have a notepad full of video ideas but no time to actually make them.
@@FinalByteGaming Sounds like a lot of miscommunication. Are you definitely sure this mod doesn't overvolt by default? Because in the later version, overvolting is as simple as editing an ini file. If it's using stock voltages the only issue I can see is some chips might underperform and cause OS corruption, but making a benchmark the first thing to do after overclocking largely mitigates that risk and lets you know if your RAM is poorly binned.
I'm just slightly concerned by the removal of this patch by the devs and the subsequent readme changes that specify this frequency as unsafe.
I know this is really old, but what were you using to test stability exactly?
@@gamespate4784 tinymemtest
Is this guide still usable in September 2023? any things that have changed?
Sorry. This guide is very out of date now. Join the discord and I can get you links to the current overclock suite
@@FinalByteGaming Thank you, I will! Looking to implement Kifir on my switch
I don't know how to do this but do i need mod chip to do this?
There's an updated version of switch OC suite that says it doesn't need to do the Hekate mod so I can't follow your instructions to do this (since the older version doesn't give you those separate kip files anymore). Could you please help us with the newest version of OC suite?
Literally as soon as I add the 'kip1=atmosphere/kips/loader.kip' line to my hetake_ipl.ini file, atmosphere won't boot! Any ideas anyone?
same bro
@@Andrei1744 You need to download the latest kip loader file and rename it to loader.kip and replace the one you already made from following the video. My switch wouldn't boot into atmosphere until I used that latest kip loader.
@@Bmetalful where and how did you get those kip loader files from ?
Only goes to 1600mhz for me according to status monitor full with the newest 13.2 version, seems that loading the kip file is not working for some reason. Loading atmosphere through hekate and made the required changes in ini, still doesn't work.
Did you open sysclk and set the ram overclock to the highest available?
@@FinalByteGaming Yes I did, still limited to 1600 mhz for some reason.
@@MrHorst38 Me too. I'm using the Switch Oled.
@@MrHorst38 ye same for me. Shows 1600mhz
Im still amazed how heavily undeclocked the switch is. If they want it to last another year, this should be official.
Hello there great video ,could you tell us your thoughts one year after using overclocking permanently (assuming you are still using it),also in 2023 (today) does this video need an update?
keep up the good work and thanks for your time !!!!
Has ANYONE had any weird graphical bugs? I hadn’t even turned on the over clocking software, and I’m seeing werid graphical bugs in my games + slight speed increase. Really not sure what specifically might cause that….
if overclocked, is the clock speed stay all the time at the highest clock speed? or will auto ramp up when necessary? for cpu gpu and ram
You can choose what speed you want. It'll stay at whatever clock speed you set it to.
Nothing is automatic.
Would it be possible to overclock everything to the max on battery on the OLED model?
Great guide, I wish my switch cooler because harder game that have 60 fps mods get my release switch to like 66 degrees and I even changed thermal paste and got new fan :/
You can change the thermal paste, especially if it's 5 years old. It will help a little.
But the switch gets hot when running intense games. Only way around it is to get a switch with a Mariko chip, but you'll need a modchip to install cfw
I'm also overcloking my game + reverse. So I basically have everything it needs so I just skipped those homebrew. I grab the 199x memory clock and followed ur instructions with making new folder deleting sys file idk remember the name exactly and I also edited my bootloader just like you said. After rebooting to sysnand (cuz I don't have emunand) and I ended having with switch suck at black screen after atmosphere logo and I have to force back to stock by holding power button.
What do you think about this? Can I talk with you on ur discord channel so you can help me out with this problem?
Joining the discord is always the fastest way to contact us.
I think it's because you run sysnand. You'll have to edit the config to load sysnand instead of emuMMC
I was following this guide until I came across the "Is my Switch hackable?" page and read into it, my serial number is wrong and it came in a red box... I just want stable FPS in Tears of the Kingdom by increasing RAM clock to 1800mHz 😢
i followed these exact instructions, but i cannot get past the minerva missing error message. whenever i launch atmosphere i get that same minerva error messaging and I cannot get past it. Any suggestions?
Hmm.
Usually you just press a button to get past it.
There have been some updates, use the latest loader.kip off of GitHub.
when i click on sys clk overlay it says its not enabled and its not showing any buttons to enable can you help
Hmm i cant get OC Suite + sys-clk working simultaneosly.
Only one or the other.
Great guide! Very easy to follow, one question, not sure if I somehow missed it. Where do I put the FPS counter on the SD card to be able to select it in the system monitor?
Thank you!
You need saltynx and nx-fps along with status monitor
mine doesnot start up anyonemore faster loading in to atmosphere
How do i do this if i dont use emmummc, my isp sucks so i couldnt play switch games online so I decided to install my cfw to the actual console to have more space for games on my sd card
well, I wouldn't recommend it but I think if you change force emummc to =0 then it should default to your system.
Hey thanks for the video- Could i ask how to enable EmuMMC? it's disabled in Hekake. Sorry if I have missed something
I able to put 2400 MHz with a litle overvolting and custom timings.
amazing!
everytime, when i put a loader.kip into the kips folder sys-clk won't work. Can anyone help me?And when i try your older 1996.kip files, atmosphere doesn't even boot.
Look at my pinned comment and add that to your Hekate.ini
@@FinalByteGaming thank you very much. With hekate it works. Can you tell me..
What are the max temperatures for the soc and the pcb? 😇
@@SebastianR1982 I've never hit it, but I heard it's 80c
Even though the guide is old, are the clocks that are safe to use still the same? Maximum CPU and MEMORY in dock and portable mode, maximum GPU in dock mode and GPU 460 in portable mode?
any chance for an updated tutorial?
Does this not work if CFW is installed on the sysnand? I followed everything in your guide, except that my CFW was installed on my sysnand years ago, and whenever I try to launch Atmosphere, I get a black screen
I wonder the sysclk & this ram oc apply to latest Switch lite with modchip?
With the Mariko SoC and modchip you're in luck.
You can get the full overclocking pack, to boost not only the ram, but the cpu and Gou higher than the original switch.
Grab all the files from Kazishime GitHub
Not Working on Atmosphere 1.7
My apologies, this is very very out of date. There are newer files.
A lot has changed.
for me when i put it at 1800mhz it just crashes
I have a question, but first let me tell you... Dude thank you for the instructions. I made that a week ago and I'm very happy. Now that a new atmosphere is out, can I update it so I can update to the latest official firmware cause I want the folders. Is it safe or I need to do all the steps again? I don't mind but someone told me that the kip is different for every atmosphere and I don't know about the latest atmosphere.
WAIT!!!!
Atmosphere hasn't been updated yet, if you update to 14.0 CFW will be unavailable.
Hekate has been updated, and I see new versions of status monitor and sys-clk are out as of today (March23rd-2022), I don't see a new Atmosphere yet.
Once new versions of those are out, you will also need the newest version of the ram-overclock(which also isn't updated yet, and MAY NEVER BE due to the developer not being interested).
So update with caution.
It should in theory be safe to update your sysnand to 14.0 and leave your emuMMC at 13.2 for the time being.
Folders aren't worth the trouble yet.
I see.. . Thank you for the clarification! You've been very helpful! There is already a prerelease atmosphere or something that supports the latest firmware tho. Yeah, folders not worth it if I'm to lose the ram overclock.
@@antonginov1530 I'm keeping an eye on things are will post when it's safe to update
@@FinalByteGaming nice talking to ya on discord. Can't wait for more videos! :)
@@antonginov1530 Next week :)
This is extremely cool. I always wondered if there were any possibilities of OC'ing the Erista model Switches beyond max in Sysclk.
One question is what tangible improvements have you seen by overclocking the memory to 2ghz? Any games in particular that has benefited well from this change/ I've seen people on the GBAtemp forums say that overclocking the memory makes the biggest difference but I've yet to see anyone post evidence proving that in games.
Well I'm not digital foundry so doing the in-depth comparison is a little bit above me. But I can tell you that I definitely notice improvements on loading screens.
Memory bandwidth has been the biggest bottleneck to Switch games, switching from 1331 to 1600 mHz in Persona 5 Royal gives me near constant 60fps with the fps cheat enabled
in the new zelda game overclocking the ram to 1866 is the key to constant 30fps
any chance of an updated guide ? using the new files from the overclocking suite caps the gpu in handheld mode to 468 mhz :/
Hi, I dont use Kekate and I was wondering if it was actually necessary for overclocking the Ram
It is because of how it boots drivers.
Do u mind explaining or making a tutorial on how to set this up so it runs for every game dynamically? I want to have games running on their best when docked/undocked, I understand that this governor allows for OC and underclock but im unsure how to make it happen, it looks really complicated to me, would love some help!
Fantastic!!
This mod actually really helps a lot, I was able to get Skyrim to a solid 60fps with it
Hey bro, I've dumped status monitor, fps counter etc but no FPS showing to my monitor
Did you install? Also I'm not sure if it works on that experiential atmosphere build did switch firmware 14.0
I'm waiting for all these things to get updated before I make an updated guide.
NX-FPS - github.com/masagrator/NX-FPS/releases
SaltyNX - github.com/masagrator/SaltyNX/releases
@@FinalByteGaming Yes I use fw 14.0, can you try on that 14.0 too?
@@lucacadalora4992 these mods haven't been updated for 14.0 yet.
Did you try using my Hekate ini details to boot?
And what does overclocking the ram do
i followed every step carefully but am not able to open the tesla menu, i even downloaded all the files which where up to date on the 22nd of february when you made this video, although there are some new ones available by now... the only thing i can tell is that in hekate/launch the atmosphere fsso emummc symbol is not an sd card but a switch and that i have atmosphere 1.2.6
please help me, you're the only one i know who could get this right, i'm trying so hard for months now... :'((((
See my pinned comment. Add that to your Hekate.ini
@@FinalByteGaming that's what i did but no tesla menu is showing up... thanks btw for your effort anyway, it seems that it's working with many others so really great work ;)
@@1multiwolfi are you on emuMMC?
@@FinalByteGaming what exactly do you mean?
@@1multiwolfi That might be your problem.
Did you make an a EmuMMC when you setup Hekate and Atmosphere, or just dump the Atmosphere files on the SD card and boot into Sysmmc?
Check atmosphere and the firmware version, Does it have and S or and E at the end of the numbers?
hello sir can u update for the lastest fw ? im using switch v1
Thanks for the tutorial, sadly i couldn't load the 1996 loader and had to use the 1.3.2 loader to for it to actually load into my cfw, other than that everything worked out great after i changed my loader, guessing it has to do with the firmware 14.1(dont quote me i am just guessing), also the 1.3.2 is using the 1862mhz which i don't mind
You're absolutely right. I need to make an updated guide when I have time.
Glad you got the upgrade working.
I tried using the 1.3.2 loader but for me it only goes up to 1600 mhz according to status monitor full display.
@@MrHorst38 same with me
Ram at 2GHZ is not really working, games like TOTK or BOTW will crash due to to ram issues. Rather go down to 1.8
I do gotta ask, what's the risk for stuff like this? Not talking about like software and stuff but about like the risk of getting banned or something
is this safer long term?
If you have like, a modded oled, would it work out?
some of these arent able to be downloaded, is overclocking still possible?
what saltynx does and is it safe to use 1.2ghz cpu clockspeed all the time? thankyou btw...
CPU can overclock all the way to up safely. Only the GPU overclock is where you should be careful.
Saltynx adds extra functions within Atmosphere, i.e. without it you can't view fps in game.
Any way to widescreen hack for 4:3 switch game? Like final fantasy remastered
I'm unsure about this. It depends on the game and if someone in the community made patches for it.
Hi! I don't get it how did you mod your switch. Is it possible to make a tutorial from complete beginning ("fresh" nintendo switch) to overclocking it? That would be awesome! 😃
(Sorry for my bad english xD)
Yeah this is something I'd like to do in the future, but at the moment I don't have an extra SD card to do that.
probably a stupid question but does the switch work online after doing this ?
Est-il possible d'overclocker le processeur sur switch lite ?
Does this have to be on emummc? or can I use it on my sysnand?
Hey man, I am kind of noob with Switch mods. If my bootloader is like this:
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/boot_fusee.bmp
Do I still follow the same process?
Yeah, that's correct
@@FinalByteGaming I finally got my head around the different atmosphere entries on the ini file. I was puzzled because I wasn't seeing them on the list, but they were available in the "more options" and then I was able to boot using a different (and your recommended) entry and everything worked out.
Cheers mate!
Hey mate,
im currently on 14.1 and following all instruction on this:
{------ Atmosphere ------}
[Atmosphere FSS0 EmuMMC]
fss0=atmosphere/package3
kip1patch=nosigchk
kip1=atmosphere/kips/loader.kip
emummcforce=1
icon=bootloader/res/emu_boot.bmp
{}
error appear..
emummc is forced but not enabled
failed to launch HOS!
That sounds like you didn't create an emuMMC partition.
It works but you have to use the file 1.4.0 and with sys-clk they provided on github.
I followed your tutorial step by step but sys-clk not running giving me fatal error . It was running fine before installing tesla
and thank you very much for your effort and great tutorial .
What the heck... Hmmm
Did you delete the Minerva file? And rename the loader.kip ?
This is the error that I used to get before I updated my hekate ini, and deleted the Minerva file.
@@FinalByteGaming Yes I deleted Minerva and on the latest hekate . I even reinstalled ATM from scratch to get it working then followed the guide again but the same error occurred again but I noticed that is happening after installing saltyNX and saltynx service is enabled no way to enable sys-clk service
I had the same issue, regardless if the Minerva file is deleted or not. It has to be with the switch oc suite file that's conflicting with it.
@@ahmedabdallah8866 ok, I have another idea. Remove all the files associated with the newer and older versions of sys-clk. Take a look at the zip files then see what files they install to see what needs to be removed. Then install the sys-clk I recommend below.
Are you still using 1996 mhz? If so, has it worked without any problems?
Could you share the files, since the link you share is down
Sure join the discord
discord.gg/jqJpn4R2
Can you update the Guide for AMS 1.3.2?
Yeah, I want to buy I have a new baby now. Will do when there is quiet time
Could this be used in Lakka to improve gamecube gameplay?
Nope since it only works on Horizon, however Lakka already allows massive overclocking by default.
Always stuck at 254.0. How to fix this?
I'm the menus 254 is displayed.
Open a game then enable status monitor
@@FinalByteGaming same result.
Can I do this without emuMMC and booting through hekate? Will it work just injecting fuse.bin and running atmosphere through sysnand?
It does not work from booting thorough fusee.bin I'm not sure what the difference is, but you have to boot through Hekate, making sure to add it to the ini file.
Im using 2131.2 on my v2 mariko
Sweet. Which atmosphere and firmware are you on currently?
@@FinalByteGaming atmosphere 1.3.0, HoS 14.00
Is there an up-to-date method available?
Does it work properly in 2024
Will this work on any switch or just older ones?
Tnak you.
Your guide is very simple and usefull.
I get 1862 mhz instead of 1996mhz. I use 1.3.2 AMS. Shpul it effect my performance? What do I need to do for 1996mhz
1996mhz kip fie is not there anymore. I am on AMS 1.3. Can I use still your file (1.2.6 loader 1996mhz kip file)?
edit: it didnt work. I need to use 1.3.2 version of loader.kip
No don't use the 1996 kip.
Everything has been updated for atmosphere 14.0 now on kazishime's GitHub.
The current accepted limit is 1862mhz.
@@FinalByteGaming thanks for reply. I haven't updated my AMS for 1.4 yet, so I'm using 1.3.2 version of kip. When I update my AMS I will change my kip file also.
How about charger oem?? Can I??
hmm the new updated loader only goes to 1800
Yeah, the developer stopped supporting higher frequencies.
You can use a hex editor to bring it back up to speed though.
I'm avoiding updating because of this.
@@FinalByteGaming oh i see thx for the info
Sorry I couldn't be more helpful.
I got in the habit of waiting until games require firmware update before I update now
can i do this in atmosphere sysnand?
but you use atmosphere
hello, could you do a tutorial for firmware 14.0.0?
I haven't updated yet, because most of the modules don't work for it yet.
Once all the necessary overclocking modules are updated, I plan on making a video.
@@FinalByteGaming That would be appriciated, I'm stuck on this as well.
can this be done to switch lite?
Thanks for the info!
Unfortunately, the 1996.2 file got removed for some reason
PS: Are Sigpatches really necessary? I'm just interested in modding the console for OC for games like Fortnite (I know I'm risking a lot haha, but yeah), and as far as I know, those are used only for backups. Sorry if I'm saying something wrong
They're need to get some Homebrew apps working and I like to install them to prevent future conflicts
can this make fps 60 for any game sir ?
Only for games with 60fps hacks
Shit i have a 65w charger for my phone and the switch thinks its thr official charger
i dont have EmuMMC can i do it from MMC?
I haven't tested it, but it should as long as you boot with Hekate.
@@FinalByteGaming There is always a fatal error with sys-clk.
I boot with hekate but the sus clk error persist
The 1996.8 files were removed. Any chance on reuploading?
Sure I'll add a link in the description. Give me 2 min.
@@FinalByteGaming Damn that was quick. Gain a sub from me for sure.
@@kamalzihani9613 many thanks. My channel's small enough that it's easy to review all the comments as they come in, as long as I'm awake that is 🙃
@@FinalByteGaming Thank you for your research and contributions man. You're a real G.
Temp goes over 60 is that even ok lol?
while in game ofc
Yeah, the creators of atmosphere said the soc can go above 70 and still be ok.
However the switch will turn itself off at 80
Alright thx man
Does this work on latest firmware?
only for erista? :S
Am i News the rmci loader
I'm not sure what you're asking?
Kazushi deleted this.
no longer possible :(
only blackscreen after the new atmo and firm update
I don't see an atmosphere update?
What are you using?
The latest is 1.2.6 and it doesn't support 14.0
@@FinalByteGaming weird im using 13 pre release
@@FinalByteGaming so it doesn't support 14 yet well now it make sense
@@DAVYSGAMINGDVG i have the loader.kip for 13.0 If you need It, this solves the Black screen
@@TheDesconection that would be awesome
Do you need a hacked switch for this?
Yup
Hmm, is there any risk of being banned for hacking a switch. I simply only want to be able to overclock my switch, no mods or anything.
@@tivvy8686 there are precautions you can take. But nothing is 100% safe unless you don't connect to the internet.
@@FinalByteGaming got it, thanks!
How safe is this ?
the sigpatches are gone. i couldnt continue
Skip them they are Not needed its Just If you Pirate Games it doesnt check if you own them. If you want them Install the homebrew all in one Switch updater it will Provide sigpatches
Hi I'm using v1 unpatched and my fw right now is 14.1 could you please make video how to OC on lastest fw 🙏🏻
I haven't updated for awhile, mostly because everything still works.
But I have researched it and it's the same process, just use latest files.
@@FinalByteGaming thanks for the reply. Last night I try to OC my gpu @768 ram @1600 and I'm using REVERSE to run docked mode on handheld. Do you think what I'm doing right now is safe or ?
Can it run on switch v1?
Yup, thats what this guide was made on.
but... the kip file provided by KazushiME has been downgraded to 1886mhz. but it's still very very helpful. Also atmosphere and the switch firmware were just updated so you should wait a little bit for this mod to get updated as well.
Sigpatches - link is dead
Yeah. Nintendo took them down.
You'll have to Google sigpatches now.
I recommend GBA temp
Thx
Are there ANY risks?
Nope, it's all gains. Because nothing is being overvolted.