FA writing 8TH is done now, I-Step stay as he is, because I don't want any mistake with BMW dealer if I need them. Thanks a lot for your tuto, it permit a successfull opération on my 320d, it work fine.
Great video! Your videos are always super informative. Thanks for all of the info shared. I worked on the old E chassis cars mostly with NCS / WinKFP and these videos give me the confidence to dive more into esys coding and programming.
Hi Vladimir, Thanks for the great video. I have already solved the problem on my BMW F45. So I hope this helps other F45 owners and I guess F46, F48, F55 and F56 as well (but not the same verified on my 2014 218d F45 ACTIVE TOURER). Everything exactly according to the video, but replace 8TH and enter 5AS, otherwise everything is exactly the same. However, I only have three commas for now because I don't have the FSC code yet, but I believe adding the FSC code will show the speed and not the commas. Well, I hope it helps someone
Some USA cars have another option present that says SLI DECODING! I have no idea why to decide such a useful option, but see if you have it in your FA. Remove and code for the solution.
@@BimDoc my one is uk car in info display i can turn on or of sli but nothing showing on dashboard even in INSTRUCTIONS in i drive i have a clip to wach how sli works dont know what to do
Taaskord väga põhjalik ja asjalik infoÕnneks enda autol on 8TH juba tehasest olemas. Aga mis hinnaklassis selle FSC koodi maksumus BWW esindusest ostes oleks?
Hello, After coding the 8TH option (SLI) in 3xECU (KAFAS2, KOMBI and HU_NBT): SLI is present - in the HUD - in the KOMBI. - FSC 0x7E upgrade of KAFAS2 is also ACCEPTED. There remains one curiosity that I would like to clarify: Rereading the car's FA after coding : the 8TH option has disappeared, everything works well, but the 8TH option is not included into the car's FA. Also the I-Step in the car remained the original one (mine is F020-18-07-547), coding has not replaced it by the one selected during connection (F020-23-07-530) Do you know if an additional operation is necessary to make this consistent (flashing, other) ? Thank for an answer if you have
Hello, i've a e45 tourer 2018 with kafas but not the gps version. Can we still activate? Can i install that version of gps in my 6" screen? What about the line control? Can we do it with carly? The fsc codes how much cost? Thanks a lot
hi i got this message after adding 8TH can anyone tell me what it means? Could it be an error in the database or a hardware error in the car? Thank you for your repl
@@BimDoc according to the vin number, my car is not equipped with a front camera, but in fact there is a camera in the car, could the first owner install a front camera? I also have collision warning enabled AppId 190 FSC code accepted. AppId 126 I have FSC code not available, 191 FSC also not available . Does 8TH apply even if the camera is retrofitted? Thank you for your response
Hi sir My f44 come from usa with usa nav. The sli worked their I am in iraq sli not work. Its say unsuported contry. Note. There is no iraq nav available.
hi i got this message after adding 8TH can anyone tell me what it means? Could it be an error in the database or a hardware error in the car? Thank you for your repl No FP could be generated from FA "". [C002] Not all elements of the FA were found in the FA2FP: SALAPA 8TH
Hi, it would be interesting if you make video how to enable SLI and NPI in non supported countries. There are lot of countries that only three dashes are shown in dashboard, or some tutorial for that also, keep up with nice work.
I have f11 03/12 press identify and when i press check fsc status error message cannot read ecu or somwtehibg like that, i had sli avaiable before but after uodatebi cen see only ---.. iny ideas? Maybe wrong esys version..?
I have purchased a a BMW F10 LCI (2015) from Korea, i did convert it to europe but i lost traffic sign recognition/speed limit info, it did work previously but now it is not working, any idea how to fix it, it just shows the sign with 3 lines and doesn’t read them, i have High Beam assist retrofitted and it’s working fine, so KAFAS2 is working for high beam, but not for speed limit info.
Hi ! Doctor of BMW ! I have BMW 528i e60 2010 M-ASK Champ head unit. I need 100% Off my Welcome chime (gong). and door open signal chime (gong) its to loud for me.If you now how ? Please Help me.. No body now how...Bimer cod not work,idrive menu dont have option make sound gong lower..were is this sound startet : cluster amask unit or defferent modul ? Thanks,Best Regards,Alex
I see when you go over the speed limit it shows like a line on the dashboard.Does it show it on the pre lci with the regular dashboard when you go over ?
Hello, I own a G31. I tried to code 8TH option but it seems not to work. Does this option have another code on this car? How can I do that ? Thanks for your help ! (Note : I have the FSC file and uploaded it to the car).
Great tutorial ! I purchased a FSC code (11F fsc code Id)for my G30 with kafas4 but when I edit the FA and trying to add 8TH or 11F I trying many SALAPA code when I press calculate FA I get an error .what I did wrong I can't do final step to activate functionality
Hey friend, Is there a way to save my oem KAFAS FSC’s for option AppID 190 and AppID 191 to my laptop since these are from factory . I want to back these up in case something goes wrong. Thank you !
I have g30 2017 and i have kafas camera and professional navigation but i dont have SLI activated,is the proces activation the same like in your video or coding is not the same?
Hi Vladimir, Thank you for a fantastic video. I have a Bmw X3 G01 2018 for German market, with SLI working excellent in EU countries. But in my country (Serbia) it does not work, only three lines in a white-red circle. Is there a way to make SLI work in Serbia and other non EU countries? Thanks Branislav
I have exactly the same problem. 2018 F36 with 6WB cluster and active 8TH but it's not working in Serbia. As soon as I cross into EU, it starts showing info (speed limit, and some other signs). I'd love to learn solution for this.
Hi, I have a registration in AOS but I don't know how to request such codes. For example for retrofits or currently for the latest map updates in the MGU system. Can you advise me how to request it?
Unfortunately no, Because after passing the road sign car will keep detaching for another sign. And if no sign it will take info from navigation map. And if there is no info the system will not work.
Thank you for your video. This is exactly what I need for my F30 LCI. In the beginning you said if there are other retrofits we need to know about them. But what do you do if there is other changes already in ECU from previous coding? I have Japanese import and dealer has coded ECUs to work in my country like map and radio, if I retrofit SLI and recode ECUs they will go back to Japanese? What should I do after if this happens? Thanks
If other codings or retrofits were made, then: Option 1) you will need to restore all the previous codings manually Option 2) FDL code needed ecus not to loose your previous codings (but you need to know exact FDL parameters for retrofitting the SLI)
Hi Vladimir, I have a BMW G31 2017 and I have Kafas Camera and Professional Navigation, but I don't have SLI activated. My Question is the Process Activation the same like in your Video or Coding is not the same? I have a buyed FSC Speed Limit Info Code... THX
Hey. Thank you for the awesome videoes. I will try to add Lane departure warning with coding. I have all hardware: KAFAS2 and vibrator in steering wheel (required) but no on/off switch In this video you dont mention the LDW option, Why is that?
@@BimDoc thank you so much for that info. I'm thinking of doing the complete driving assistance for my 2017 f31 lci. Do you know if 'pedestrian detect' and 'lane change warning' require a fsc. I hope you have a good day your reply sure saved my day 😁🤝
Great and useful video like always! I was wandering can you supply FSC code for me or can you activate it remotely for my G30 and how much will cost me?
Hi mate, i do have few questions please 1) I have bimmercode and it is working fine with my OBD, do i still need enet? My car is F15 (bmw x5 2016) 2) where is the speed limit reading from? Is it the map because my maps doesn't have a speed limit. But i have KAFAS system
If you know all the parameters then you can make it via BimmerCode also. The only question how to import fsc via BimmerCode? So enet and esys are still needed.
@BimDoc will this work exactly the same for G31 with iDrive7 MGU and original FSC? I guess only the kafas version (3 instead of 2) and the appid (reg adresses) may change? But coding the FA and the ECUs is basically the same?
Подскажите, на f30 как мне найти эту настройку? Kombi: 3000 Anzeige_Konfiguration SPEED_LIMIT_GENERATION В биммеркоде ее нету у меня. Она вроде позволяет доьавить знаки «обгон запрещен»
Hi, great info. I have a 2013 E70 X5m with high beam assistant (camera in windshield), is this KAFAS based? My navigation is 112184.2.13 premium (usb) 2020 and I have driver assistance package code 0ZDA. Just wondering if this upgrade is possible in this case? Looking at rear view mirror options on realoem, I have S302A (Alarm) = Yes, S5ACA (high beam) = Yes, 55ADA (Lane Departure) = NO, and there is only one mirror option remaining with YES, YES, NO and it shows S8THA (road sign detection) = YES. How can I truly confirm S8THA is an option in my vehicle? I have a bimmergeek code reader if that helps. I would pay for services if you can help. Thx.
Thanks for replying. I did a little more research. Lane departure was on option on E70/E71's but not an option in X5M/X6M, not sure why. There is a kafas camera module and windshield camera that was part of the lane departure option.I have top view and side cameras, but doubt I have this specific kafas module.I plan to check the location under the driver dash for the control module. If not there I could add the hardware, but would be suprised if the power and camera harnesses are there. I did check coding and I do see the SLI setting, but it is disabled, as well as a few lane depature settings, also disabled. @@BimDoc
Привет. У меня бмв ф11 2012 cic profesional. Нашёл в продаже так называемый speed limit модуль. Внедряется в приборку и берет данные от карт. Вопрос на cic это работает или только на NBT ?
Hi mate, thanks for this tutorial, however i have g02 2019, is the process same for g02 2019 or different also what version of esys do you recommend for g02?
Добрый день. Есть такая функция с завода 5DF Active Cruise Ctrl+stop&go Funct., знаки тоже видит. У меня вопрос. Могу я включить функцию торможения против столкновения с пешеходом и ещё ,при торможении до 30 км/ч дальше сбрасывает тормоз, то есть ниже 30 не тормозит. Что нужно сделать,? В настройках авто ничего такого нет. Спс.
Hello Vladimir , I've been trying to code the SLI to work in an unsupported country , but without success .. I have tried multiple Country Hex codes but none seem to be working , i have also tried enabling and disabling the horizontal option thing (can't really remember the name), but no luck ! I have read basically every thread and discussion on this topic but nothing has worked :( And believe me, there is a lot of users looking for solution. Any idea what could work ? Please help. BMW F11 2011 with KAFAS1 Forgot to mention , I have the 2022 Maps (EAST) installed , living in the Balkans currently.
Thanxs for another great video! I already have SLI, but i'd like to add also SLA. I've managed to get all the menus for it only while tinkering with Bimmercode in expert mode, but it was not working. Could you please help me with that? I am already using ESYS. Which FA code do i need to add and/or remove? It is F11 07/2014. Thank you very much. Bolshoe spasibo.
@@BimDoc i have it already. The button for lane change warning. Got 5AS option, but i’d like to change it to 5AT. Actually i was initially asking about SLI (speed limit info) and coding it to SLA (speed limit assist) :)
Можно ли как-то исправить то, что знаки читаются в Европе(только выездаешь в Литву - всё работает), но как въезжаешь в Беларусь - три прочерка вместо ограничения скорости?
Hi sir , i want to purchase sli fcs code from bmw dealer but i dont know how to do it , can you tell me how much is cost and if u have website or email address for them to purchase the fcs code Thanx
Hello, thank you for a great video. I have BMW F36 with KAFAS2 (to 5AS i 5AC), but I have only small screen without navigation function. Is it possible to activate SLI without navi?
Hi @BimmerDoc. thanks for the video. Can cruise control be adapt with the recently enable SLI. To make it clear, for example, cruise control adjusts the speed whatever speed limit applies on that road.
Hi Vladimir, I have an X5 X35d with KAFAS2 and 8TH enabled from factory and accepted FSC code. This car was from USA and it has the NBT Head Unit (Not EVO ID5/6) , I changed the maps to Europe but the SLI only shows 3 dashes (---) . Im currently in the Balkans and even if I code to camera_only it just does not work. Do you have any solution for this? Thanks in advance and please keep up the good work!
There are regions of the world where SLI is not supported officially. So switching to camera only is a right direction. But some more parameters have to be changed.
@BimDoc even if payment is needed, we can arrange that just put your email or telegram here so I can contact you. And as always keep this up , you're truly the BMW Doctor
I want to activate SLI on my G30 which has KAFAS4, DKOMBI4 and HU_MGU. I read in some Forum that I need to set the following FDL Parameters by FDL coding. But in your video you have only added option 8TH, then calculate FP and press on Code. Does that mean I do not need to modify this FDL Parameters manually? HU_MGU: SPEEDLIMIT_INFO: aktiv [01] KAFAS4: NPI_ENABLE: initwert [01] SLI_ENABLE: initwert [01] DKOMBI4: ADDITIONAL_SIGN_ENABLE: aktiv [01] CB_TACHOZEIGERBAND: aktiv [01] HUD_NO_PASSING_ENABLE: aktiv [01] HUD_SPEED_LIMIT_ENABLE: aktiv [01] NO_PASSING_ENABLE: aktiv [01] PIA_HUD_SLI: aktiv [01] PIA_HUD_SLI_NPI: aktiv [01] PIA_HUD_SLI_PORTIERUNG: aktiv [01] PIA_HUD_VSLI: aktiv [01] PIA_SLI_NPI: aktiv [01] PIA_TACHOZEIGERBAND: aktiv [01] PIA_TACHOZEIGERBAND_PORTIERUNG: aktiv [01] RCOG_TRSG_APPL: aktiv [01] RCOG_TRSG_TIMEOUT: aktiv [01] SLI_PERMANENT_ENABLE: aktiv [01] SPEED_LIMIT_ENABLE: sli [01] TACHOZEIGERBAND_ENABLE: aktiv [01]
@@BimDocспасибо! Сейчас по факту не отображается,в настройках вкл/откл не нашёл. Авто из Японии, возможно, из-за региона не показывает. Как сменить регион на Россию (Европу) и руссифицировать пока нигде не нашёл информации.
Vladimir from where you and when you bought your ICOM NANO i ordered one nano in one of the bmw dealer in Bulgaria but they thought me, no have any icon nanos in stores in Germany...i wait 3-4 months and again no have in stock in Germany. Do you have any idea what happened why bmw stopped to sell it or they work on better icom nano?
Добрий вечер, если у меня ф30 2017 года с америки и есть камера на лобовом, асистенти 8th и 5as по вин коду, мне нужно только сменить регион на европу и все будет работать?
Thank you for this video i already have this option on my F10 LCI also i would like to know if it's possible to add the high beam assist when we have the KAFAS camera ? I know that it's mandatory to change the SZL but is it the only part to change ?
Здравствуйте, машина из Японии, есть абсолютно все из Вами перечисленного, только не принимает коннектинг драйв (в вашей стране не работает пишет) и не показывает знаки. Нахожусь на Кипре. Можете ли все подключить дистанционно ? Заранее спасибо. Да, дилер сказал , что коннектинг драйв нельзя у нас подключить, только машины купленные у них, думвю просто не в теме он. Еще раз спасибо, а видео супер! 👍👍👍
@@BimDoc думаю те кто будет это делать самостоятельно на врядли поедут к дилеру на диагностику :) главное отключить istad проверку на проверку подленности fsc кодов
Nice video, thanks! It will be great to show how to deal with not supported countries.
Brother your English is very good! Nice video again!
Thank you 😊
FA writing 8TH is done now, I-Step stay as he is, because I don't want any mistake with BMW dealer if I need them. Thanks a lot for your tuto, it permit a successfull opération on my 320d, it work fine.
You are welcome
Thanks for the video, Just done my F54 clubman, due to not having 8TH I had to FDL code but the injection segment helped me out.
Hello Vladimir, really thanks for your video, I got it! the sli works ok. Really thanks friend. Regards from Madrid
Enjoy it
Keep going all the best from Jordan Middle East
Thnx )
Great video! Your videos are always super informative. Thanks for all of the info shared. I worked on the old E chassis cars mostly with NCS / WinKFP and these videos give me the confidence to dive more into esys coding and programming.
Very cool!
Great tutorial, I purchased FSC code and activated it succesfully on My 640D grancoupè, thank you.
Glad it helped
Hi Vladimir,
Thanks for the great video.
I have already solved the problem on my BMW F45. So I hope this helps other F45 owners and I guess F46, F48, F55 and F56 as well (but not the same verified on my 2014 218d F45 ACTIVE TOURER). Everything exactly according to the video, but replace 8TH and enter 5AS, otherwise everything is exactly the same. However, I only have three commas for now because I don't have the FSC code yet, but I believe adding the FSC code will show the speed and not the commas. Well, I hope it helps someone
Good info ℹ️
Yes FSC will solve the issue.
I’ve tried that on 2 series 😉
Hi
Please how tell me how active sport display in bmw f22 is no move thank you
Hi,
It’s doable via coding the HU.
If it doesn’t help then chiptuning of engine ecu is needed.
Hi just have a question i have bmw f01 by vin i have 8th option but dont have eny road sighs icons on my cluster or hud i have kafas plus lane asist
Some USA cars have another option present that says SLI DECODING!
I have no idea why to decide such a useful option, but see if you have it in your FA.
Remove and code for the solution.
@@BimDoc my one is uk car in info display i can turn on or of sli but nothing showing on dashboard even in INSTRUCTIONS in i drive i have a clip to wach how sli works dont know what to do
Taaskord väga põhjalik ja asjalik infoÕnneks enda autol on 8TH juba tehasest olemas. Aga mis hinnaklassis selle FSC koodi maksumus BWW esindusest ostes oleks?
See vägagi sõltub riigist. Hinnaklass on 50-100 EUR vahel
After doing this did i gonna lose the apple carplay that I activated via feature installer
Yes
Use feature installer to activate CarPlay again
Kas liiklusmärkide infot on võimalik siduda püsikiirusehoidjaga?
Selline funktsioon on uutel BMW-del olemas, kuid Eestis ei ole täis tuge kõigile BMW võimalustele (
Hello,
After coding the 8TH option (SLI) in 3xECU (KAFAS2, KOMBI and HU_NBT): SLI is present
- in the HUD
- in the KOMBI.
- FSC 0x7E upgrade of KAFAS2 is also ACCEPTED.
There remains one curiosity that I would like to clarify:
Rereading the car's FA after coding : the 8TH option has disappeared, everything works well, but the 8TH option is not included into the car's FA.
Also the I-Step in the car remained the original one (mine is F020-18-07-547), coding has not replaced it by the one selected during connection (F020-23-07-530)
Do you know if an additional operation is necessary to make this consistent (flashing, other) ?
Thank for an answer if you have
Answers:
You don’t see 8TH because you did not write it into your vehicle FA
And istep changes has to be made manually via VCM Master tab
Thank you for the informative video “as usual” 👍🏻
You welcome 🤗
Thank you, it's really useful information.
Yes it is. Enjoy )
Thanks, really fantastic video-work,man-🤝
Enjoy 😊
Hello, i've a e45 tourer 2018 with kafas but not the gps version. Can we still activate? Can i install that version of gps in my 6" screen? What about the line control? Can we do it with carly? The fsc codes how much cost? Thanks a lot
hi i got this message after adding 8TH can anyone tell me what it means? Could it be an error in the database or a hardware error in the car? Thank you for your repl
No FP could be generated from FA "". [C002]
Not all elements of the FA were found in the FA2FP: SALAPA 8TH
It means that option is impossible on your bmw.
Most likely you have G series and over there procedure is a bit different
@@BimDoc I have a BMW 218d ACTIVE TOURER F45
@@BimDoc according to the vin number, my car is not equipped with a front camera, but in fact there is a camera in the car, could the first owner install a front camera? I also have collision warning enabled AppId 190 FSC code accepted. AppId 126 I have FSC code not available, 191 FSC also not available . Does 8TH apply even if the camera is retrofitted? Thank you for your response
Hi sir
My f44 come from usa with usa nav. The sli worked their
I am in iraq sli not work. Its say unsuported contry.
Note. There is no iraq nav available.
Maximum you can do is to use SLI data from road signs and KAFAS camera. Not from navigation.
hi i got this message after adding 8TH can anyone tell me what it means? Could it be an error in the database or a hardware error in the car? Thank you for your repl
No FP could be generated from FA "". [C002]
Not all elements of the FA were found in the FA2FP: SALAPA 8TH
Hi, it would be interesting if you make video how to enable SLI and NPI in non supported countries. There are lot of countries that only three dashes are shown in dashboard, or some tutorial for that also, keep up with nice work.
Thanks for the idea!
Google COUNTRY_SLINPI_MODE. Done it recently, works well.
This would be really nice if you would make video.
There is some instructions on internet, but no one want to share true informations.
KAFAS2 > 3010 > COUNTRY_SLINPI_MODE
00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF
KAFAS2 > 3000 > COUNTRY_VARIATION > ECE
KAFAS2 > 3010 > COD_CAM_ONLY > FUSION_MODE
KAFAS2 > 3010 > COUNTRY_CODING_DISPLAY > ECE_WHITE
KAFAS2 > 3010 > TSM_COUNTRY_VARIATION > ECE
HU_NBT > 3004 > COUNTRY > ECE
KOMBI > 3003 > SPEED_LIMIT_GENERATION > SLI_GEN_2_NPI
I have f11 03/12 press identify and when i press check fsc status error message cannot read ecu or somwtehibg like that, i had sli avaiable before but after uodatebi cen see only ---.. iny ideas? Maybe wrong esys version..?
Definitely not the esys version issue.
Maybe fsc codes were wiped out and have to be restored.
I have purchased a a BMW F10 LCI (2015) from Korea, i did convert it to europe but i lost traffic sign recognition/speed limit info, it did work previously but now it is not working, any idea how to fix it, it just shows the sign with 3 lines and doesn’t read them, i have High Beam assist retrofitted and it’s working fine, so KAFAS2 is working for high beam, but not for speed limit info.
It is solvable remotely.
Contact me for assistance
Hi ! Doctor of BMW !
I have BMW 528i e60 2010 M-ASK Champ head unit.
I need 100% Off my Welcome chime (gong). and door open signal chime (gong) its to loud for me.If you now how ? Please Help me.. No body now how...Bimer cod not work,idrive menu dont have option make sound gong lower..were is this sound startet : cluster amask unit or defferent modul ?
Thanks,Best Regards,Alex
Vladimir, how do you know which ecus need coded after a retrofit? For example how did you know for sli you need to come kafas, hu and cluster?
Based on experience 😅
Great job !
I see when you go over the speed limit it shows like a line on the dashboard.Does it show it on the pre lci with the regular dashboard when you go over ?
Dont know (
Hello,
I own a G31. I tried to code 8TH option but it seems not to work. Does this option have another code on this car? How can I do that ? Thanks for your help ! (Note : I have the FSC file and uploaded it to the car).
On G series FDL coding is needed to make SLI working.
Thank you. I will do that.
Hey, do you know which functions in detail to set "active" inside the different Ecu's?@@BimDoc
Can you make a video for f10 pre LCI?
If F10 pre LCI has kafas camera then over there SLI doesn’t need a code.
I have cafas new maps 2023 europe all coded from factory but Sli message is not avalible in your country
Great tutorial ! I purchased a FSC code (11F fsc code Id)for my G30 with kafas4 but when I edit the FA and trying to add 8TH or 11F I trying many SALAPA code when I press calculate FA I get an error .what I did wrong I can't do final step to activate functionality
On G series procedure is a bit different!
@@BimDoc can you guide me how to do it ..I do have esys launcher pro and the fsc code only I need a right instructions how to do to a G series.thanks
can you activate this option on bmw g15 lci 2023g idriv 8
Not doable so easily any more
If we have Hud Display, we have to code this ecu too? thanks
No you don’t.
Because HUD takes info from KOMBI
@@BimDoc Really thanks, from Madrid
where can i get fake fsc code
Hey friend, Is there a way to save my oem KAFAS FSC’s for option AppID 190 and
AppID 191 to my laptop since these are from factory . I want to back these up in case something goes wrong. Thank you !
Yes it can be done.
Esys ultra launcher has that possibility for example
Hi Vladimir
What should I choose in the target main series for the g30?
Choose S15
@@BimDoc Thanks
I have g30 2017 and i have kafas camera and professional navigation but i dont have SLI activated,is the proces activation the same like in your video or coding is not the same?
On G series it is a bit different. But also doable. Contact me directly pls.
To avoid any mistake is it possible to ask BMW to do this complex process?
You can try))
But easier to code it remotely
Is it the same process with kafas4 (g05 from Korea)?
No it will not work on G05 in the same way
@@BimDoc what else do I need to do? Change hex and some fdl coding?
How about speed cameras? Is there any way to add it ?
Unfortunately not doable (
Haw can i change my region navigation from japan to mideal east
Unfortunately not from Japan
Some more procedures is needed for that
Please if you can help us for that 😢😢😢
Does the same procedure applies to f20 too?
Chassis does not matter.
So yes it will work in F20 as well.
Hi Vladimir,
Thank you for a fantastic video.
I have a Bmw X3 G01 2018 for German market, with SLI working excellent in EU countries.
But in my country (Serbia) it does not work, only three lines in a white-red circle.
Is there a way to make SLI work in Serbia and other non EU countries?
Thanks
Branislav
It should be doable.
I have exactly the same problem. 2018 F36 with 6WB cluster and active 8TH but it's not working in Serbia. As soon as I cross into EU, it starts showing info (speed limit, and some other signs). I'd love to learn solution for this.
Could you let me know how I can purchase the FSC code from BMW?
Send me PM for a price offer
@@BimDoc I sent you email. Thanks
Hi, I have a registration in AOS but I don't know how to request such codes. For example for retrofits or currently for the latest map updates in the MGU system. Can you advise me how to request it?
Not all is diable via AOS portal
Some code request require bmw dealer level portal (S-Gate)
I live in Iraq, and my car is imported from us. Can I make the car read the SLI without using navigation data?
Unfortunately no,
Because after passing the road sign car will keep detaching for another sign. And if no sign it will take info from navigation map. And if there is no info the system will not work.
@@BimDoc That's exactly what I want to archive, How Can I make that Possible?
Thank you for your video. This is exactly what I need for my F30 LCI.
In the beginning you said if there are other retrofits we need to know about them. But what do you do if there is other changes already in ECU from previous coding?
I have Japanese import and dealer has coded ECUs to work in my country like map and radio, if I retrofit SLI and recode ECUs they will go back to Japanese? What should I do after if this happens?
Thanks
If other codings or retrofits were made, then:
Option 1) you will need to restore all the previous codings manually
Option 2) FDL code needed ecus not to loose your previous codings (but you need to know exact FDL parameters for retrofitting the SLI)
@@BimDoc Cool. Thank you for coming back to me. I think I will try to FDL code it, just have to find out what FDL needs to be changed for 8TH.
Hello.With KAFAS 4 Do we need FSC code r just add 8TH.
With kafas4 FSC code is also required!
SLI will not work wo that
Hi Vladimir,
I have a BMW G31 2017 and I have Kafas Camera and Professional Navigation, but I don't have SLI activated. My Question is the Process Activation the same like in your Video or Coding is not the same? I have a buyed FSC Speed Limit Info Code...
THX
On G series procedure is a bit different.
FSC code is still needed, but instead on FA coding you have to make FDL coding
@@BimDoc do you have any plans on doing a video for enabling SLI for G series?
My F15 X5 40d has decided that its top speed is now 210km/h limiter whereas before it was 236km/h. I wonder if there was a software update
Might be some pollution limitation.
VMax can be increased via chiptuning.
@@BimDoc thank you
Hi does this work on the f40 116ia?
Chassis does not matter. Installed hardware matters
Hey. Thank you for the awesome videoes.
I will try to add Lane departure warning with coding.
I have all hardware: KAFAS2 and vibrator in steering wheel (required) but no on/off switch
In this video you dont mention the LDW option, Why is that?
LDW does not require FSC code. But yes it is also possible with KAFAS2
@@BimDoc thank you so much for that info. I'm thinking of doing the complete driving assistance for my 2017 f31 lci.
Do you know if 'pedestrian detect' and 'lane change warning' require a fsc.
I hope you have a good day your reply sure saved my day 😁🤝
Great and useful video like always! I was wandering can you supply FSC code for me or can you activate it remotely for my G30 and how much will cost me?
Yea it’s doable.
Contact me remotely
Very informative. Can you please make a video showing how to do the same on a G model using FDL coding?
Procedure is the same according the FSC code.
You just have to know right FDL parameters
How to virginize kafas2 ,If the FSC status is rejected.?? excellent video.
You don’t need to Virginize it. You need proper fsc code or knowledge how to make fake codes work.
Hi mate, i do have few questions please
1) I have bimmercode and it is working fine with my OBD, do i still need enet? My car is F15 (bmw x5 2016)
2) where is the speed limit reading from? Is it the map because my maps doesn't have a speed limit. But i have KAFAS system
If you know all the parameters then you can make it via BimmerCode also.
The only question how to import fsc via BimmerCode?
So enet and esys are still needed.
Thanks again🙏💪. How to buy original FSC?
Go to bmw dealership and ask for fsc for Sli ))
@BimDoc will this work exactly the same for G31 with iDrive7 MGU and original FSC? I guess only the kafas version (3 instead of 2) and the appid (reg adresses) may change?
But coding the FA and the ECUs is basically the same?
Fsc is required yes.
But not so straight forward.
But still doable
Why not so straight forward? Because of component Protection?
Will you make a Video about activating sli in MGU soon?
Подскажите, на f30 как мне найти эту настройку?
Kombi:
3000 Anzeige_Konfiguration SPEED_LIMIT_GENERATION
В биммеркоде ее нету у меня. Она вроде позволяет доьавить знаки «обгон запрещен»
Смотрите в приборке по части ключевого слово. Иногда помогает
Hi, great info. I have a 2013 E70 X5m with high beam assistant (camera in windshield), is this KAFAS based? My navigation is 112184.2.13 premium (usb) 2020 and I have driver assistance package code 0ZDA. Just wondering if this upgrade is possible in this case? Looking at rear view mirror options on realoem, I have S302A (Alarm) = Yes, S5ACA (high beam) = Yes, 55ADA (Lane Departure) = NO, and there is only one mirror option remaining with YES, YES, NO and it shows S8THA (road sign detection) = YES. How can I truly confirm S8THA is an option in my vehicle? I have a bimmergeek code reader if that helps. I would pay for services if you can help. Thx.
SLI on E series is possible, but it is a very rare option.
I haven’t retrofitted SLI on E series. So more investigation is needed.
Thanks for replying. I did a little more research. Lane departure was on option on E70/E71's but not an option in X5M/X6M, not sure why. There is a kafas camera module and windshield camera that was part of the lane departure option.I have top view and side cameras, but doubt I have this specific kafas module.I plan to check the location under the driver dash for the control module. If not there I could add the hardware, but would be suprised if the power and camera harnesses are there. I did check coding and I do see the SLI setting, but it is disabled, as well as a few lane depature settings, also disabled. @@BimDoc
Подскажите пожалуйста, на g01 с аналоговой приборкой можно вывести ограничения знаков? Кафас и навигация есть.
Да можно
Есть возможность сделать удаленно? И цену пожалуйста.
Привет. У меня бмв ф11 2012 cic profesional. Нашёл в продаже так называемый speed limit модуль. Внедряется в приборку и берет данные от карт. Вопрос на cic это работает или только на NBT ?
Не пробовал, но думаю что может сработать.
@@BimDoc сработало, все ок !
Красота. Приветствую Володя.🤝🏻
Hi mate, thanks for this tutorial, however i have g02 2019, is the process same for g02 2019 or different also what version of esys do you recommend for g02?
For G series FSC code is still needed but coding procedure is a bit different.
@@BimDoccan you activate it + fsc if I have Active guard onboard S5AV? 2019 G01
Добрый день. Есть такая функция с завода 5DF Active Cruise Ctrl+stop&go Funct., знаки тоже видит. У меня вопрос. Могу я включить функцию торможения против столкновения с пешеходом и ещё ,при торможении до 30 км/ч дальше сбрасывает тормоз, то есть ниже 30 не тормозит. Что нужно сделать,? В настройках авто ничего такого нет. Спс.
Помощь от наезда на пешеходов так же активируется кодом как и сли.
Про торможение на скорость ниже 30 кмч быть может решается кодированием. Не изучал.
@@BimDoc Спасибо за Ваш ответ. Могли бы Вы подсказать какой код у куда внести? В инете информации не нашёл. Спасибо.
Respect !!!
Hello Vladimir ,
I've been trying to code the SLI to work in an unsupported country , but without success ..
I have tried multiple Country Hex codes but none seem to be working , i have also tried enabling and disabling the horizontal option thing (can't really remember the name), but no luck !
I have read basically every thread and discussion on this topic but nothing has worked :(
And believe me, there is a lot of users looking for solution.
Any idea what could work ? Please help.
BMW F11 2011 with KAFAS1
Forgot to mention , I have the 2022 Maps (EAST) installed , living in the Balkans currently.
Try setting parameters for CAMERA only
Wo navigation
Thanxs for another great video! I already have SLI, but i'd like to add also SLA. I've managed to get all the menus for it only while tinkering with Bimmercode in expert mode, but it was not working. Could you please help me with that? I am already using ESYS. Which FA code do i need to add and/or remove? It is F11 07/2014. Thank you very much. Bolshoe spasibo.
Lane keep assistant requires extra buttons as well. Not only the coding.
@@BimDoc i have it already. The button for lane change warning. Got 5AS option, but i’d like to change it to 5AT. Actually i was initially asking about SLI (speed limit info) and coding it to SLA (speed limit assist) :)
Можно ли как-то исправить то, что знаки читаются в Европе(только выездаешь в Литву - всё работает), но как въезжаешь в Беларусь - три прочерка вместо ограничения скорости?
Региональное ограничение.
Поправимо
Hi sir , i want to purchase sli fcs code from bmw dealer but i dont know how to do it , can you tell me how much is cost and if u have website or email address for them to purchase the fcs code
Thanx
Hi, and then for SLI FSC for your vehicle. If they cannot help you, write me directly for assistance.
Владимир, скажи пожалуйста, где можно купить fsc коды для kafas2 на мой f15?
Пишите в личку. Разберемся
great job! thax!
Thnx
Hello, thank you for a great video. I have BMW F36 with KAFAS2 (to 5AS i 5AC), but I have only small screen without navigation function. Is it possible to activate SLI without navi?
Don’t worry about that, your first worry should be fixing your small screen to pro nav
Hi @BimmerDoc. thanks for the video. Can cruise control be adapt with the recently enable SLI. To make it clear, for example, cruise control adjusts the speed whatever speed limit applies on that road.
Not on those cars
Hi Vladimir,
I have an X5 X35d with KAFAS2 and 8TH enabled from factory and accepted FSC code.
This car was from USA and it has the NBT Head Unit (Not EVO ID5/6) , I changed the maps to Europe but the SLI only shows 3 dashes (---) .
Im currently in the Balkans and even if I code to camera_only it just does not work.
Do you have any solution for this?
Thanks in advance and please keep up the good work!
There are regions of the world where SLI is not supported officially.
So switching to camera only is a right direction. But some more parameters have to be changed.
@@BimDoc Can you help with what needs to be changed please?
@BimDoc even if payment is needed, we can arrange that just put your email or telegram here so I can contact you.
And as always keep this up , you're truly the BMW Doctor
I want to activate SLI on my G30 which has KAFAS4, DKOMBI4 and HU_MGU.
I read in some Forum that I need to set the following FDL Parameters by FDL coding.
But in your video you have only added option 8TH, then calculate FP and press on Code.
Does that mean I do not need to modify this FDL Parameters manually?
HU_MGU:
SPEEDLIMIT_INFO: aktiv [01]
KAFAS4:
NPI_ENABLE: initwert [01]
SLI_ENABLE: initwert [01]
DKOMBI4:
ADDITIONAL_SIGN_ENABLE: aktiv [01]
CB_TACHOZEIGERBAND: aktiv [01]
HUD_NO_PASSING_ENABLE: aktiv [01]
HUD_SPEED_LIMIT_ENABLE: aktiv [01]
NO_PASSING_ENABLE: aktiv [01]
PIA_HUD_SLI: aktiv [01]
PIA_HUD_SLI_NPI: aktiv [01]
PIA_HUD_SLI_PORTIERUNG: aktiv [01]
PIA_HUD_VSLI: aktiv [01]
PIA_SLI_NPI: aktiv [01]
PIA_TACHOZEIGERBAND: aktiv [01]
PIA_TACHOZEIGERBAND_PORTIERUNG: aktiv [01]
RCOG_TRSG_APPL: aktiv [01]
RCOG_TRSG_TIMEOUT: aktiv [01]
SLI_PERMANENT_ENABLE: aktiv [01]
SPEED_LIMIT_ENABLE: sli [01]
TACHOZEIGERBAND_ENABLE: aktiv [01]
On G series 8TH will not work and the only solution are those FDL parameters 😉
Как вы поняли что нужно кодировать именно эти блоки в не другие?
Потому что именно это блоки отвечают за эту опцию.
@@BimDocну это понятно. Сделайте пожалуйста при возможности разбор этого вопроса
@BimDoc why didn't you use *.der certificate? Isn't it a 'must' to do so? :/
If I haven’t then it isn’t just do ))
For Sli it’s not needed actually.
@BimDoc but if it is, you always get certificate from dealer with the fsc, right? :)
@BimDoc great Video! Can you make a Video about Lane Departure Warning coding? I feel like this is possible without any FSC
Yes, lane departure can be activated wo fsc code
Hey man great vid, maybe you could say what other options can be coded along with SLI if you have KAFAS? Such as Lane departure etc?
Different KAFAS ECUs support different functions.
Top man 🎉
Big up
Добрый вечер. Подскажите, кафас 1 на е71 не могу активировать sli в Беларуси . Какие параметры ?
Не делал SLI на Е серии. Только на Ф и Г
С E-Net кабелем получиться это сделать?
Да получится
Regarding FSC, does this apply to fsc codes that you use to activate maps?
No SLI fsc and maps fsc are different
Nice video!
Please tell me what options are available on CAFAS4 ?
I have to check in my G30))
супер!
а удержание в полосе не получится так же включить? обязательно нужно ставить кнопки включения ассистентов?
Не все решается чисто софтом (
Удержание в полосе же работает при наличии камеры кафас
Добрый день! Подскажите, активация на g31 отличается?
Да отличается. Но код все равно нужен
Владимир, если на х1 f48 2017 г. есть комплектация 8TD, её можно ЗАМЕНИТЬ через E-sys на 8TH? Появится при этом SLI?
Если в kafas есть нудный фсц то да.
И скорее всего на данном авто не надо добавлять 8TH. Думаю что вам стоит пакет ассистентов где знаки уже включены.
@@BimDocспасибо! Сейчас по факту не отображается,в настройках вкл/откл не нашёл. Авто из Японии, возможно, из-за региона не показывает. Как сменить регион на Россию (Европу) и руссифицировать пока нигде не нашёл информации.
С Японкой не так просто все
Vladimir from where you and when you bought your ICOM NANO i ordered one nano in one of the bmw dealer in Bulgaria but they thought me, no have any icon nanos in stores in Germany...i wait 3-4 months and again no have in stock in Germany. Do you have any idea what happened why bmw stopped to sell it or they work on better icom nano?
I purchased it couple years ago. So I don’t know current status of icom nano ((
@@BimDoc out of stock i hope they working on new icom nano next😅
Is it the same for F82
Actually it depends on the KAFAS type installed.
On all kafas2 ECUs the process is exactly the same.
On kafas4 it is a bit different.
I have done it and added to the head up display and cluster now I should buy and FSC code right ?
Also it not shows that is not available it shows just like this - - - - - -
Добрий вечер, если у меня ф30 2017 года с америки и есть камера на лобовом, асистенти 8th и 5as по вин коду, мне нужно только сменить регион на европу и все будет работать?
По идеи да, карт Европы должно хватит чтобы SLI работал как надо (в вашем случаи)
@@BimDoc thank you
Привет,скажите пожалуста sli работает только в европейские страны,или неивоопейские тоже работает???
Тоже, но в некоторых странах надо доработать
DOC! Where can I buy a legit fsc code in the UK can you help and do you have direct contact info????
Yes I can help with OEM codes.
Send me direct message.
Thank you for this video i already have this option on my F10 LCI also i would like to know if it's possible to add the high beam assist when we have the KAFAS camera ?
I know that it's mandatory to change the SZL but is it the only part to change ?
If you have SLI via KAFAS1 then auto light assistant will not work.
Kafas2 is needed
@@BimDoc is there anyway to know if I have kafas1 or kafas2 ? Any physical difference ?
Bimmerdoc, im with Kafas1 and my auto light working just fine!@@BimDoc
Здравствуйте, машина из Японии, есть абсолютно все из Вами перечисленного, только не принимает коннектинг драйв (в вашей стране не работает пишет) и не показывает знаки. Нахожусь на Кипре. Можете ли все подключить дистанционно ? Заранее спасибо. Да, дилер сказал , что коннектинг драйв нельзя у нас подключить, только машины купленные у них, думвю просто не в теме он. Еще раз спасибо, а видео супер! 👍👍👍
С японками есть свои ограничения. Так что там может и не получится смена региона.
@@BimDoc Спасибо большое...
Hello, great video 🙏🏻
Can you shared the codes or can we get it from you? And the program used to do the coding.
Thank you
Codes have to be purchased separately for each VIN.
С наступающими праздниками Пасхи
На kafas2 не обязательно покупать оригинальный fsc, можно подгрузить с машины с любым вин кодом и все работает
Да фейк подкинуть можно. Но при посещении любого дилера все эти фейк коды будут отвергнуты.
@@BimDoc думаю те кто будет это делать самостоятельно на врядли поедут к дилеру на диагностику :) главное отключить istad проверку на проверку подленности fsc кодов
Где можно взять FSC код для активации чтения дорожных знаков? Автомобиль F44, с KAFAS 2, без навигации.
Прям так что бы взять то никак. Надо покупать.
@@BimDoc Возможно ли купить с Вашей помощью. Так как варианты самостоятельного поиска в том числе на международных форумах успехом не увенчались.