Self Steering Sheet to Tiller for Sailboats
HTML-код
- Опубликовано: 30 июл 2024
- Paul VanNess shows how to set up self-steering on a sailboat using Sheet-to-Tiller method while aboard a San Juan MkII 21, Rainbow Dash, on a trip across the Pamlico Sound to Ocracoke, North Carolina. Learn how to assemble the gear you will need.
Music: All music on this channel is written, recorded and produced by me, Paul Van Ness.
Check out my merchandise at my store:
sailorpauli.creator-spring.com
Outstanding! It's often hard to convince fellow sailors of the efficacy and ease of sheet-to-tiller steering. Your video describes and demonstrates the system perfectly. Great job.
Glad you liked it! Thanks.
wow. my ten year old daughter just set up our course all by herself. so easy!
Great to the point tutorial thanks for the time you spent creating this.
Thanks for Watching!
Gotta try that one out!! Stay blessed!!!
Thanks for watching! good luck!
Cool system Paul! I’ve heard about it but never seen it some. Good job explaining it! Peace Brother
I will try it this summer ! The summer 2022 i jabd steared sometimes up to 14 hours , i am getting to old for it. I have gad many autopilots for a tilöer steering but off course sold them when buying a boat with syeering wheel. Now i am back on tiller steering again and love it !
Yes. Try it! Watch my other five minute videos on STT for more tips.
Never had a problem upwind , just an occy strap (Australia) roof rack strap right across with one loop on the tiller in a constant wind and Bobs your Aunty (better be inclusive)... But down wind I'd have to say yours is the best and simplest... Thanks and all the best...
Thanks for watching! Glad to help. Peace
I like it! Thanks. PS. Have crossed oceans and have crossed the Pamlico Sound...........They are both fun!!
have albin vega 27. will be using this. thanks
Nice one! Thanks.
Awesome job great vid explaining how you set up and use tiller to sheet steering. Nice work and keep it up, new subscriber here
cool.
Yo! I’m gonna rig this up one day!
I do my downwind rig just a little different, but I’ll have to try your method. Do you backwind the jib slightly? Also, probably 15 kts for this setup?
I think it was 12-15 kts that day. There are so many ways of doing this. Every boat is a little different. I have an old out of print book I learned this from years ago written by a guy that sailed to Hawaii and developed his techniques along the way. I will be making more videos soon with other techniques and variations. If you have two jibs you can run downwind by wrapping each jib sheet to the tiller without any elastic. The tail block is used if you have a jib too small to respond. A genoa doesn't usually require a tail block. Do I back the jib? No, but sometimes downwind, if the jib backs it keeps a course. But it's probably not the course I set up. Thanks for watching.
@@adventuresofsailorpauli1543 great video ! One question if the change side of tacking from starboard to port or vice vase, from up wind or down wind, does your rigs need to flip side? Thank you!
Yes. If you tack you must change sides.
I never have a sailboat and little confused. Here is my: If the wind getting stronger from the starboard, the boat turns away to the port, and it needs the physical rudder turns to the starboard to steer it straight, therefore the tiller should move to the port side (the rudder and tiller move the opposite) . Do I miss a big here? Thank you to show this simple system.
A sailboat is usually set up with weather helm. So the boat will turn up into the wind.
Tillers do steer opposite unlike a wheel.
Very good video!
What model is your boat?
Thanks!
Thanks! She is a 1975 San Juan 21 MKII
did it maintain speed or lose speed?
It maintains speed and course as long as the wind stays the same. When the wind eases in same direction, it still maintains course. This is the best self-steering that only works with a tiller. Wind vanes break and leave you waiting for parts, electronic systems run your battery dead and break, jam and will turn your boat off course in the presence of large steel structures like bridges. This however, is a skill that you must learn and hone. I use sheet-to-tiller all the time. It steers better than I do. Most people give up because it seems complicated. I got sick and tired of taking apart those raytheon tiller pilots trying to fix them. I read an old book and learned how to do it from a fella that sailed to Hawaii in the fifties. Sheet-to-tiller is a sailor skill that is a balancing act. Most all of my videos on this channel have some sheet-to-tiller examples. Thanks for watching!