Machining a Gearbox Shaft

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 740

  • @WelLRoundeDSquarE
    @WelLRoundeDSquarE 9 лет назад +175

    Nothing in life is more beautiful to watch than a true craftsman at work. I've been a Machinist 35 years, and I can count on one hand the number of men I've seen with this level of workmanship, and just plain caring. Well done sir.

    • @Abom79
      @Abom79  9 лет назад +13

      Thanks for the kind words.

    • @WelLRoundeDSquarE
      @WelLRoundeDSquarE 9 лет назад +23

      +Abom79 You're quite welcome. I'm just telling it as I see it. It is refreshing to see someone with not just haphazard luck, but actual Machining Methods. Machining, be it repair, new builds, R&D, is all about methods. When you take the time to learn the right Methods, and never waver (except when you're backed into a corner, or just plain walk on water lmao) then the process becomes muscle memory, which is where speed and total confidence comes from. if you're that guy that's always in a hurry, you'll never be good, or fast. You will have a huge resume, albeit 99% bullshit. lol Your demeanor, and steady pace, even with distraction of commentary and conscious effort to explain in detail the Method to your Madness, clearly screams of a man that took the time to become a true craftsman, always following those methods burned into your soul, which like the Rubiks cube, if you go thru the correct motions, success is never a question. at the level you're at, there is nothing I could drop in your lap that you couldn't, or wouldn't find a way to repair or duplicate. I'm also quite sure you'd also gravitate toward the simplest, most efficient way to reach your goal. I've wanted to do online Upper level process and program "classes" but don't currently have the resources. things like how to relieve endmills, or how to chuck one up in a tool holder. which end goes into the tube first when putting a tool back. the depth of perfecting our trade is bottomless. everyday is a strive for perfection. We're a dying breed, very close to extinction. I have a daughter, no sons, no one to pass it on to. Kids wanna play effin video games, and when they get their HS diploma they want $30 an hour with zero skills. one more generation could be the end of craftsmen with skills like ours. That's why what you're doing here is so important. It's very selfless, and can only benefit the world we live in for the better. I don't like to call it praise, more just recognition for what you represent. Thank You for being the gracious gentleman that you are, and sharing your beautifully honed skills with the world. I have great respect for what you do, and represent here. ok enough emotional crap, fuck off and get back to work!!! lmao. Be Well my Friend, and God Bless. Peace to All.

    • @DMTrojan
      @DMTrojan 8 лет назад +6

      +WelLRoundeDSquarE
      You guys are cool. I may never be a machinist or a craftsman, but it's really amazing to see you folks at work!

    • @WelLRoundeDSquarE
      @WelLRoundeDSquarE 8 лет назад +13

      ***** I believe you can be anything you want. The only requirement is honesty. The more honest you are with yourself, the better you will be at anything you choose. Lying to yourself, making excuses for your mistakes, all lead to a big head and no real talent. Always be true to yourself, no matter what goes on around you. It's also very important to see the truth, the real truth in everything you look at, and analyze. Only then can you choose the correct path to built or repair something. Never base your path on others opinions or evaluations, yours is the only one that matters.

    • @blv935
      @blv935 8 лет назад +2

      +WelLRoundeDSquarE I have to agree, im a mechanic myselfe from norway, its beautiful to wach such work of art. Thanks for the video upload Abom79 :)

  • @nicolek4076
    @nicolek4076 9 лет назад +25

    There's always something comforting and satisfying watching a piece of metal taking shape on a lathe, I think.

  • @kylesmith9956
    @kylesmith9956 9 лет назад +4

    This brings back memories of when I was younger going to work with my dad. He worked in a Caterpillar Dealership as a welder. The next bay over was the machine shop where they they rebuilt hydraulic cylinders. Archie was the first Machinist that the dealership had hired.(Retired with 65 years of service) He was a bit overweight always always had a cigar in his mouth and a paperboy hat on. When he would finish a job he would always yell.. "Damn that's beautiful work!" You Sir are doing some beautiful work!

  • @carmelpule6954
    @carmelpule6954 9 лет назад +13

    When I see such machining, I do not only appreciate the profuct itself but the courage of the man doing the operations, There is accuracy and art and so many more issues that the average schools do not appreciate, I have the most admiration for these silent people I admire their courage and lack of clumsiness and all I can say that any surgeon would learn a lot seeing such a man working to such accuracy. I repeat, I feel that even surgeons should go through this training of guaranteeing such accuracies and such lack of clumsiness. Congratulations.

    • @KaptainKerl
      @KaptainKerl 9 лет назад

      +Carmel Pule' its less art and more accuracy.

  • @jerzyigielski7987
    @jerzyigielski7987 8 лет назад

    Z wielką satysfakcją oglądam pracę prawdziwego mistrza w zawodzie. Obecnie tacy ludzie, którzy w tak perfekcyjny sposób wykonują swoją pracę są godni pochwały. Na uwagę zasługuje bardzo solidne przestrzeganie reguł i zasad obowiązujących w dziedzinie tokarstwa i prac frezarskich.
    Takie filmy powinny być pokazywane młodym adeptom w zawodach związanych z obróbką skrawaniem z komentarzem jak powinna wyglądać praca dobrego fachowca. Gratulacje!

  • @multicraftman
    @multicraftman 10 лет назад +17

    Hi Adam
    My first comment. I'm just an old retired guy taking up home machining as something to stay busy at until the Lord calls me home. I enjoy watching how you do good work and bring it down to precision. Gives me something better to shoot for. I love to watch people that are good at what they do. Your great, keep inspiring me to do better.
    May God Bless
    Donald

    • @Abom79
      @Abom79  10 лет назад +8

      Thanks a lot Donald. Your words are kind and heartfelt. I'll keep making videos if you keep watching. Thanks buddy.
      Adam

  • @h4z4rd42
    @h4z4rd42 9 лет назад +2

    I love the logic how your following steps are planned.
    Learned a lot, thank you Sir for sharing.

  • @patrickroeill8746
    @patrickroeill8746 7 лет назад +1

    Hi adam this is the first video i watch I'm a mechanic of 30 years and to watch you work is awesome you make it look easy great job.I will be watching a lot more

  • @WOODBARK100
    @WOODBARK100 9 лет назад +6

    Sir, you are one cool headed cat. Impeccable work and great quality videos. Thanks for caring enough to share!

  • @Nesmorbutt
    @Nesmorbutt 9 лет назад +11

    Thanks for posting this, I'm not even a machinist but this just fascinates me. Guys like you built this world, or the machines that run it.art!

    • @marshallman1au
      @marshallman1au 8 лет назад

      +Darren Corbett
      Me too .... I find it fascinating to watch ..... :)

  • @jrpower5
    @jrpower5 8 лет назад +1

    I'm not a machinist, but I have a passion for technology, wood and steel crafting. I can watch this kind of videos for hours. It just doesn't get boring. Amazing to see this kind of workmanship!

  • @swarfrat311
    @swarfrat311 10 лет назад +1

    Hey Adam,
    Thanks for showing some more of you on the job. Your shaft build went great! I'm sure your customer will be very pleased.
    Hope you have a good one!
    Dave

  • @JOSEPHNGUYEN-gb8bn
    @JOSEPHNGUYEN-gb8bn 9 лет назад +1

    GOD bless you. I am learning Precision Machining Technology. After I watch this video that were helped me get more knowledge about my job in the future. Thanks

  • @TheLimalha
    @TheLimalha 9 лет назад +1

    I have a mini lathe and every time I watch your vídeos, I learn some new technique. Thank you for sharing your knowledge with us !!

  • @bazmon
    @bazmon 10 лет назад +1

    Great video Adam... none of the nonsense 'tool tests' or "Fan Tributes" just great machine work... Thank you...

    • @Abom79
      @Abom79  10 лет назад

      Thanks Barry. I enjoy making the true machining videos and sharing, but also like doing my SNS videos so i can talk about a mix of subjects as well.

  • @GunvaldRacing
    @GunvaldRacing 8 лет назад +2

    A true professional! Those 42 minutes went quickly. Thank you!

  • @AndyTaylorprinter
    @AndyTaylorprinter 9 лет назад +1

    Its great to watch a skilled tradesman in action, you make it look so easy. Thank you

  • @MarvinLeeGreen
    @MarvinLeeGreen 10 лет назад

    Thanks for taking the time and making this one. im 51 just graduated vo-tech. started work as a machinist at a hydrolic cylinder company in Muskogee,Oklahoma. you have been a great help in Florida. Thanks Again! Marvin Lee Green

  • @sjacobson005
    @sjacobson005 10 лет назад +2

    It is a pleasure to see a gifted machinist do his work. Also, very clean editing of the video. Many thanks.
    Steve in Los Angeles

  • @frankpitochelli6786
    @frankpitochelli6786 8 лет назад

    You are a master machinist. ...I have been in the electronics bizz for 35 + yrs, lathe work and machine shops always fascinated me, and I can see you are a seasoned vet at your craft, what's more amazing is you don't need cnc machines to do your work for you, you earn your talent and prove your craft....
    Splendid work...!!!!!!

  • @Hobi6411
    @Hobi6411 9 лет назад +7

    I just stumbled onto this video, Abom79 you are an artist. In the world of digital machines to find a true artist is a pleasure. Keep the trade alive :-)

  • @leewilliamson1406
    @leewilliamson1406 9 лет назад +13

    This is one of the better lathe videos because of the perspective and also because of the running commentary.

  • @onepairofhands
    @onepairofhands 10 лет назад

    good work, takes me back to my apprentice days. . .i like the way you don't over talk what your doing and let the results speak for themselves. Peter

  • @MrPawillie
    @MrPawillie 10 лет назад +2

    This is Machining Architecture at it finest,great video and thanks for posting.God bless you.

  • @matthewsykes4814
    @matthewsykes4814 8 лет назад +7

    Love seeing how a rusty bit of metal gets made into something so polished and accurate with such ease, great video

  • @moclab87
    @moclab87 9 лет назад

    Before this video, I never found myself watching videos over a few minutes long. Before I realized it, the video was over. You do great work, and I really enjoy the quality of your videos.

  • @maxjowett7130
    @maxjowett7130 10 лет назад +4

    Adam,
    I'm a machinist student over here in California, I recently landed an internship at Shell Oil refinery working in the shop. Want to let you know your videos offer a great deal of information and help me immensely. Keep the videos coming.

    • @Abom79
      @Abom79  10 лет назад +1

      Great to hear that Max! Good luck with your machining journey!

  • @yanwo2359
    @yanwo2359 10 лет назад +2

    Michelangelo would be jealous. Great work! I like how "good enough" to you is perfect.

  • @backontrack1697
    @backontrack1697 6 лет назад

    Very well explained for us beginner, self taught machinists who just love learning of you guys

  • @pdiesman
    @pdiesman 7 лет назад +13

    I'll say it again: When I grow up I want to be this guy : )

  • @nixxonnor
    @nixxonnor 6 лет назад +1

    I enjoyed this build. I can watch this stuff all day

    • @ChrisBrown-dy8ts
      @ChrisBrown-dy8ts 4 года назад

      Nicolai I’ve been a manual lathe turner for 32yrs and I also could watch all day. If I wasn’t turning all day👍

  • @31415geon
    @31415geon 5 лет назад

    It's always fascinating to see the machining processes on lathes, but the chamfering step is always the most satisfying.

  • @cosminmitrasca5812
    @cosminmitrasca5812 3 года назад +1

    That "Phiuuuuuu" in the beginning when you saw just how off-center the material was at the end was quite funny!

  • @stevenvt1
    @stevenvt1 10 лет назад

    thanks for posting this. nice to see there are still real craftsmen around that know how to build stuff out of metal.

  • @dtdavie01
    @dtdavie01 8 лет назад

    Its always nice to sit and watch a real engineer at work, I've always been in engineering and you know when someone is good at there job and is a real craftsman. What is it they say quality always shows and we can all see you know your job inside out and back to front, just by how you make tuff jobs look so simple. Great video Sir, I really enjoyed watching you flip about a big chunk of steel.

  • @Mr880881
    @Mr880881 6 лет назад +1

    Nice job on the shaft. I read the comments below and I am struck by how many think thats art or magic. Thats a simple shaft with key ways in it. Don't get me wrong, its not simple for new machinists that get nervous when they need to hold .0005 on a bearing race. I have 38 years on stuff like this, so doing this is just another day at the shop without even thinking about it. You young fellows keep at it because this is an awesome trade. I don't fart around with stuff like that any more because I have 8 machinists working for me now that do it. And most of the time they do it on the cnc equipment. I still push them to go to the manual and do stuff like this when there is only one or two. Man I have never seen a collect holder that old. I am 57 years old and nothing in our shop looks like that but we do have a paint brush that looks the same.

  • @chrismills5110
    @chrismills5110 10 лет назад +2

    Adam, Very many thanks for your work. We can get no tuition at all in metal turning in England, and we really appreciate what you guys are doing with these videos. Best wishes, from Chris, London, England.

  • @kenzpenz
    @kenzpenz 10 лет назад +4

    Incredible work, watching that thing take shape and be turned into an identical part was great. You make it look so easy, but I know it takes years of experience to become this proficient. This was a two cups of coffee to watch this morning. Thanks for another great video.
    Ah well, back to turning wooden pens....Ken

  • @jonathanlink1006
    @jonathanlink1006 10 лет назад +1

    Adam, thanks much for this video. I machine only to compliment my hobbies and this video as others you produce have taught me practical techniques I will use to further my skills. Keep up the great work. Jon

  • @pointer2null
    @pointer2null 8 лет назад

    Love watching these - boring but strangely compelling at the same time. I love seeing how it all comes together.

  • @MyShopNotes
    @MyShopNotes 10 лет назад +5

    Enjoyed watching the whole process Adam. Thanks for sharing.
    You are the master of the 4jaw.

  • @rusty7720
    @rusty7720 10 лет назад

    Adam,you are awesome at machining,great to watch from a blank piece of shafting

  • @Geordo1960
    @Geordo1960 9 лет назад

    To those of us who have never done this kind of work this is nothing less than amazing. I really admire the skill involved here, you guys don't get paid enough!

  • @southlakelife
    @southlakelife 9 лет назад

    Great Video! I could watch these for hours. True craftsmanship right there.

  • @w056007568
    @w056007568 10 лет назад +5

    I enjoy very much you showing us this type of heavy machining work that you do and it must be most satisfying using good materials, tools and equipment to achieve this sort of outstanding result.

  • @barriewright2857
    @barriewright2857 9 лет назад +5

    Very informative, a good video of how a component, is made by lathe, nice. It shows a craftsman at work.

  • @SBBlacksmith
    @SBBlacksmith 10 лет назад +3

    Awesome video, and great work. As an aspiring machinist, I am amazed with how fast you are wight the four jaw chuck.

  • @metaling1
    @metaling1 10 лет назад +1

    Nice work Adam. The 4140ph turned beautifully and that shaft looked perfect.
    Tim

  • @OmahcronOmni
    @OmahcronOmni 9 лет назад

    The amount of dedication and precision its just humbling watching this no detail missed. Thank you for sharing this with us.

  • @paulmetcalfe2467
    @paulmetcalfe2467 3 года назад

    What an awesome machinist you are! Simply delightful to watch you work so methodically and accurately. Makes us proud to be an American. This is what makes "Made In America" so great! Keep up the great work and all the best in all you are doing.

  • @erikdevaney4781
    @erikdevaney4781 7 лет назад

    i know this is an older video, but love to watch them over and over again. got my new ABOM TORQUE shirt in the mail today. my birthday present from my girls. thanx

    • @Abom79
      @Abom79  7 лет назад

      +Erik Devaney Thanks great Erik!

  • @Positrack
    @Positrack 5 лет назад

    It's amazing how quickly you can center a part in the lathe. That's the hand of experience right there.

  • @twitchietwat2980
    @twitchietwat2980 8 лет назад +1

    Beautiful work, and nice to see how you do this. You are very relaxed while working. I bet that helps a lot.

  • @Thunderstixx77
    @Thunderstixx77 7 лет назад

    Great job again Adam. You and Keith are the best shop teachers I have seen in my considerably long life, so far anyway !!!
    I'll let you know how next week looks, but so far you two are right there at the top !!!

  • @knightlangelot5238
    @knightlangelot5238 8 лет назад

    I'm not a machinist and I enjoyed watching this. incredible workmanship!

  • @davidduffy9806
    @davidduffy9806 8 лет назад +1

    Zso cool, I love your very business like commentary. If I had my time again I would have been a machinist. Love your work! David

  • @eiclan
    @eiclan 10 лет назад

    Gday from Western Australia,hi Adam,as an old machinist I have to say that you do nice work.In the days of my apprenticeship in the early seventies out the back of Kalgoorlie in the mines we would have metal sprayed that old shaft. Since they bought the machine to do it then we had to . lol That 4140 is tough stuff and I am glad to see that there is another person who likes to polish down to the size. Cheers mate and keep up the good work. Ross

  • @Dsp.Studios
    @Dsp.Studios 10 лет назад +2

    Great job Adam! I kind of think of you as one of my teachers. I'm a machinist too, but I have loads to learn from you. Thankyou!

  • @Hardturnin
    @Hardturnin 10 лет назад +2

    Hi Adam, I liked the work and can tell the process is known well by you. Very nice shaft.

  • @unchained_0177
    @unchained_0177 9 лет назад

    Hello And thanks so much for your videos I enjoy watching them As an older guy who is taking a manual machining and CNC college course I appreciate your talent !!!

  • @Antagraber
    @Antagraber 9 лет назад +5

    Hi Adam. I appreciate you post this video. My father worked on this job and I've always be curious about.
    I watched and enjoyed the whole video, and now I better understand why he was always very meticulous about all that he did in his life. And how this job fitted with his behavior.
    Thank again. Tony.

    • @Abom79
      @Abom79  9 лет назад +3

      Antagraber Thanks Tony! Glad you enjoyed!

  • @g2macs
    @g2macs 10 лет назад +2

    Excellent! I really enjoy it when you take us to work,
    thanks mate!

  • @ElijahIan
    @ElijahIan 6 лет назад

    Thank for showing us your love for this kind of art because you are an artist a Dr of your trade. Great work sir!

  • @Bookerb2004
    @Bookerb2004 10 лет назад +2

    Well damn, this one took over an our to finish watching cause I had to revisit some stuff.
    Sounds like your real tired Adam, thank you for taking the time to share a great build. Wow!

  • @HP_rep_mek
    @HP_rep_mek 10 лет назад +1

    Pure joy to see you machine a shaft like this!

  • @harleyghost
    @harleyghost 10 лет назад +2

    Adam you sure do nice work! I always enjoy watching your work.

  • @Brad1962Fisher
    @Brad1962Fisher 10 лет назад +2

    Watching you turn that shaft reminds me of the shaft in the gear box of our Ghel Grinder mixer! the shaft came in and split I think 3 or 4 ways, there was a up auger, a mineral input auger, and out put angled auger and a long delivery auger from the angled out put to the feed bunk and they all were running through that 1 shaft! and it would get twisted about 3/4 of a turn and then things wouldn't stay engaged anymore! I know I put 1 in and I know they had to change it I think 2 more times over the years! then all the pto shafts on our hay mowers, Etc.... great video and great work!

  • @44magsw
    @44magsw 10 лет назад +1

    Nice shaft build Adam, That 4140 is nice to work with, will resist rust and corrosion well also! Thanks for sharing some more "at work" time!
    Jeff

  • @BoffinGrusky
    @BoffinGrusky 10 лет назад +2

    Hey Adam: Appreciate you taking the time to shoot and post these videos!! I always learn something new by watching your craftsmanship!! I liked the way you found the center of the shaft when you had it in the milling machine vise....very clever!!

  • @lightning655
    @lightning655 10 лет назад +1

    Only recently came across your videos but they are some of the most interesting videos on this subject you seem like a genuine guy keep it up

    • @Abom79
      @Abom79  10 лет назад

      Thank you! I have many others so be sure to check them out.

  • @sequorroxx
    @sequorroxx 8 лет назад

    That edge finding tool was amazing! The rotating bit that slides along an offset and gets closer and closer to center when it hits the edge is genius. I fucking love engineering!

  • @borgejoh
    @borgejoh 7 лет назад

    I'm studying in Germany in order to become an engineer and I've done some small parts on an old 3-jaw during an internship this year... All the theory and my "knowledge" just seems worthless compared to the skill and experience you show here. Truly inspiring work! I will always respect people working manually like this and I hope I can work with some as soon as I'm done studying... Watching a skilled machinist will always amaze me. Thank you very much for sharing!

  • @fredschmidt3148
    @fredschmidt3148 8 лет назад

    I am a retired mechanical engineer. This is an exceptionally good video. The machinist is a master of the 4 jaw chuck and wastes absolutely no time or motion. The video lighting is good as is the audio. I have only one suggestion, Abom 79, make more videos.

  • @saladbrain
    @saladbrain 10 лет назад +1

    Fantastic! Wonderful to watch such a talented engineer at work. Very inspiring, and I hope you will upload more in the future.

  • @billmoran3812
    @billmoran3812 10 лет назад

    Adam, I could not help but think your dad must be looking down and smiling. YOU are the master machinist now. he did a good job training you.

    • @Abom79
      @Abom79  10 лет назад

      I hope he is Bill, and that he is proud of the machinist I have become.

  • @thatlittleworkshop
    @thatlittleworkshop 10 лет назад +1

    Liked the video it nice to see another machinist at work using similar procedures and techniques.
    By the way I like that big belt polisher.
    Thanks, Ian

    • @Abom79
      @Abom79  10 лет назад +1

      That belt sander makes polishing jobs a breeze, also helpful when cleaning up rust or paint off the OD.

  • @Opinionator52
    @Opinionator52 10 лет назад +2

    Great Video Adam, and a great looking part... Showing all the set-up steps, was an excellent teaching technique... It's also nice that you can make these videos at work... I'm sure there will be one happy customer receiving this nicely finished product of your skill!
    O,

  • @shanegill25
    @shanegill25 9 лет назад +3

    Sir, as someone who is the end user of work like this, I would like to shake your hand and buy you a beer for going +.002 on the keyway depths!
    I don't know how many times I have had to sand, or even grind, on keys to get them to fit!!!

  • @GeneralElectricCNC
    @GeneralElectricCNC 7 лет назад

    Very nice job! You're giving away all of our secrets though! Ha! It's hard to believe that more and more people have no idea how to run a manual machine. The only thing they do is push the "Cycle Start" button. Tool selection, insert grade, speed and feeds, and coolant are all important. Keep up the good work. Hope the young guys watch.

  • @wheelieking71
    @wheelieking71 10 лет назад +1

    As always, fine craftsmanship Adam!!! And, quick too.

    • @Abom79
      @Abom79  10 лет назад

      Bill right? Good to hear from you!

  • @kalmankeri
    @kalmankeri 8 лет назад

    Your videos are entertaining and nostalgic at the same time. They remind me of school time in polytechnic. Later I went to a computer programmer what I also love to do but I miss the smell of engine oil.

  • @MikeDittmanmachining
    @MikeDittmanmachining 10 лет назад +6

    If I get half as good as you Adam I'll be happy. Your four jaw skills never cease to amaze.
    Thanks,
    Mike

  • @jeffstowasser9176
    @jeffstowasser9176 7 лет назад

    allow me to clarify something... An old machinist once told me. "Laborers work with their hands. Craftsman work with their mind and their hands, but an artist work with their heart, mind and hands." that can't hold anymore true. Adam is a true artist.

  • @emilbader1524
    @emilbader1524 10 лет назад

    I so enjoy what you do and share. Mahalo much. I am new to the world of machining. I've always wanted to learn about it. I am a 25 year transmission builder and just got a 12"Logan lathe willed to me. I have repaired several transmissions pumps and drums. So I really enjoy seeing this cut. Keep on keeping on. Aloha..... Emil Bader

    • @Abom79
      @Abom79  10 лет назад

      Congradulations on your new lathe purchase. The Logan is a nice machine. I'm glad to hear you enjoy the videos. Thanks for the comments.
      Adam

  • @davewalton2358
    @davewalton2358 8 лет назад

    Fantastic! Beautiful craftsmanship and a pleasure to watch. Well done on a great video!

  • @AstraWerke
    @AstraWerke 10 лет назад +1

    Aaand I just noticed I wrote the exact same compliment as many did before :D
    I guess that's why one becomes a machinist - rusty chuck to gleaming shaft.
    I am currently building a steam engine out of the tons of rusty bolts and chunks of metal I found on our streets - also a very satisfying job :D

  • @seanstephenbrothers5227
    @seanstephenbrothers5227 6 лет назад +2

    I want to be a machinist too this video gives me a lot of idea on how to become a good machinist thanks a lot for sharing this video.. i cant wait to go to training school.

    • @ChrisBrown-dy8ts
      @ChrisBrown-dy8ts 4 года назад

      sean stephen brothers did you become a manual machinist?

  • @shobud7561
    @shobud7561 7 лет назад +2

    Great Job Done With Pride !
    I could watch for hours ....

  • @JohnBare747
    @JohnBare747 10 лет назад +16

    Enjoyed it immensely Adam, watching you doing your Abom Magic turning a rusty blank into a perfect replacement shaft how can you not enjoy that. Thanks for the video. I watch and enjoy "How Do They Do It" on the TV this is kind of "How Do Adam Do It" great entertainment for anyone who gets a kick of seeing shiny metal appear as if by magic out of a rusty hunk of metal.

    • @Abom79
      @Abom79  10 лет назад +18

      Being a machinist, it gives you a sense of satisfaction being able to create something out of a raw chunck of steel.
      Thanks john.

  • @japhygoldman8856
    @japhygoldman8856 6 лет назад +2

    How quickly and accurately Adam trues up a shaft in a 4 jaw is amazing. It's been a long time since I did any machining, I started out an apprenticeship at Boeing a few decades ago, ran a manual lathe mostly and I can tell you he is a real pro. thanks for the fun videos

  • @RelentlessHomesteading
    @RelentlessHomesteading 7 лет назад

    Yes, beautiful to watch; seeing a piece of steel become a workable part and almost art.
    Thanks I'm just getting into this and its great to watch how you proceeded through the process.

  • @johnleake708
    @johnleake708 10 лет назад +2

    Another very informative and well done video Adam

  • @619BossDogg
    @619BossDogg 9 лет назад

    Manual machining is truly an art. Great video!

  • @martinrohm5469
    @martinrohm5469 10 лет назад +3

    Exelent job Adam, thanx for sharing it.

  • @CarterWHern
    @CarterWHern 10 лет назад +4

    Great video angles, editing, great work.

  • @Kennynva
    @Kennynva 9 лет назад +4

    You are an amazing person..and the most laid back person too...nice work..you have to be southern like me ....Im from Savannah..Ga..

    • @Abom79
      @Abom79  9 лет назад

      Thanks, Pensacola FL

    • @Kennynva
      @Kennynva 9 лет назад +1

      I just got done watching your video of the pump impeller trim down...did the customer use a more efficient motor...and a smaller pump housing...or change it all together..?

    • @NeeleshChiliveri
      @NeeleshChiliveri 8 лет назад

      .

  • @tomauth3419
    @tomauth3419 10 лет назад +2

    Great job always enjoy seeing the work you do

  • @MarcusHelius
    @MarcusHelius 8 лет назад

    Watching lathing is relaxing, and satisfying... Such clean precise cutting. :)

  • @Thatguyyoumettoday
    @Thatguyyoumettoday 8 лет назад

    I have no idea what's going on but its fascinating to watch you work.

  • @drienkm
    @drienkm 9 лет назад +30

    Great video! I was stunned how quick you trued up the 4-jaw when you flipped ends:)

    • @immolationangel4124
      @immolationangel4124 8 лет назад +2

      Not trying to sound pompous or arrogant, but i honestly thought that was pretty standard. Maybe i just had an incredible teacher (my old boss was a phenomenal teacher). I can usually true up anything from 3-18 inches in diameter in about a minute on a 4 jaw (two years experience).
      Don't get me wrong though, when it comes to running manual machines, he's on a whole other level, i mostly do CNC work, and he's much faster and more proficient on a manual than i'll probably ever be. His skills remind me of my old boss.

    • @kreazyv8
      @kreazyv8 8 лет назад

      you had a phenomenal teacher.. working a 4 jaw is a pretty nasty thing if you dont know what to turn, let alone how much... so be proud at your craftsmanship....
      XD

    • @immolationangel4124
      @immolationangel4124 8 лет назад +2

      The way i learned was to kinda eye where the jaws need to be with a steel ruler, snug them down a bit (not very tight, just enough to hold). Stick an indicator on it by the chuck and spin it, lightly loosening and tightening the jaws a little bit until it's within a thousandth or so, and check the end of your part away from the chuck (tap it true with a deadblow). Then apply equal pressure to each jaw gradually tightening each of them. The trick is to have a feel for it and know how much pressure to apply each time until the part is tight enough to run, but not so tight that you make the part into an oval or mar the finish (if it's already at nominal diameter).
      If you tighten all the jaws down until they don't want to move from the start, you're going to be fighting yourself trying to true it up, and have hell doing so. The first part i tried to true up on a 4 jaw was a piece of 6 in diameter pipe with a finished OD. I tightened all the jaws from the start and it took me 30 minutes to get it true, until my boss came by and just trued it up, teaching me in the process.

    • @johnearland9961
      @johnearland9961 7 лет назад

      fdrienkm