A most excellent video, that project was way to easy, no beat up hands, no getting angry and no swearing. My 2016 300c is due for an up grade, this has helped me big time.
I know it is a two year old video, but to save time with the airbox on the driver's side. Just remove the bolt in front of the airbox. Once that bolt is removed, you can simply lift up the entire airbox and either use long bungee or any type of hanger and hold it up using the hood latch catch or if you have someone helping out, have them hold it up and out of the way. Easy peasy 😊
Just got done installing LED bulbs on my 300. I went with a different manufacturer but this video showed me how easy it would be to do. Much appreciated sir.
Great video. Just upgraded mine today and everything worked out perfectly. The link in the description was very useful too!! Specs: 2018 Chrysler 300 Touring
I have to re-do mine...went out for a night drive and the lights were all messed up looking, not really lighting up the road in front of me. I guess you have to put them in a certain way. Put the stock ones back in for now and will try the white bulbs again tomorrow paying attention to how I put them in.
2019 Limited here, I was looking at the lightning dark as I’ve heard good reviews over other brands but I couldn’t find any videos with them in a 300. Gonna order these ones today. Thank you for such a clean and easy to follow along video!
Update: they look amazing and work perfect, you might need to adjust them lower because people will think you have your brights on haha. Only issue I have is they flicker when I have my volume high (but that’s from aftermarket subwoofers, not they light’s fault)
Really likes the look for the headlights but would prefer the Halogen more yellow light cuts thru fog a little better. Here to tell ya looks really sharp.
I have a 2017 300S, I purchased a pair and I was not able to get the cover to sit on there correctly and they burned out. Im going to give these a try, I like how everything looks like a perfect match, the fogs and the strip. Im buying this one now.
Yeah that’s why I went with these because they match the fog lights plus they are the same size as the original bulbs that way you can get the cover back on and not allow moisture or dirt and debris in.
@@BLUECOLLARGARAGE Update: They are in and look freeking amazing, they fit like OEM. I was able to get the covers back on with no problems at all. Never again am I going with HID, they would always blow out one at a time then the other would blow. No more them days are gone. These match up just perfectly with the DRL's and Fogs. So far I have not experienced any flickering. Thnx for the video man.
I have got 2 different brands off Amazon led light both flicker then shut off completely. I have a chrysler 300c platinum, any suggestions I really want to upgrade my lights too brighter ones . ?
What year is yours? If it’s a 2015 or older you will most likely need canbus decoders like these amzn.to/3J5z8f2 and that should take care of your issue.
I have the same Chrysler 300 and I will love to change the headlights to LED as well. But I need more information about this LED you are installing please. Can you please share the link . Thanks
I have a 2015 Chrysler 300 (new style) just installed some leds on it and passenger side flickers and shuts off is this something to do with canbus ? Tia
I have a 2015 Chrysler 300 S just installed the new LEDs and I’m having the same problems they’ll flicker and turn off any recommendations try to click in link but it was unavailable
Did you have to adjust the lights in any way? I bought some different ones and the beam patterns is off. i had to use a small allen wrench to adjust the sides and its frustrating cause it's still not even lol.
Yeah I ended up buying these and while I liked that the ring was fixed and not adjustable, I noticed it doesn't fit anyway except how it was found so the LED placement was not 9 and 3, but rather 10/4 or 11/5
@@BLUECOLLARGARAGE ordered the same ones you installed , work great! That driver side dust cover was tricky to get off. It took me longer to get that one off than the whole job! Thanks for your vid .
@@BLUECOLLARGARAGE thanks for the reply. How are they holding up. I know the cheap ones dont last long in my opinion. So i had to go back to those ugly dingy halogen.
@@BLUECOLLARGARAGE just installed mine today. It states that they should be 3 and 9. But when u lock them in place its not 3 and 9. Is that how yours are?
I changed the headlight bulb because my lights are so dim . The issue I have now is that the led strip in the headlight is super dim now and I don’t know how to fix it
I have a Chrysler 300 2015, I bought the 9005 led and it worked for about 5 seconds and then flickered and went off; I hope the same doesn't happen with the 9012; do you recommend any specific brand and what about Watts? what is the max that we can install?
You will probably need a canbus decoder some of the 2015 and earlier models have issues when switching to led and this usually cures the problem heres a link amzn.to/3XyUt4w
@@BLUECOLLARGARAGE however the one you reccomneded is 9005/9006 while the led for the chrysler 300 is 9012! or is it the same ? can you please help on this too, thanks
I bought the exact same led lights for my 2017 Chrysler 300 but now I started to notice condensation forming inside the right headlight unit did this happened to you ???
Same here.. I have a 2013 Chrysler 300 and I’m noticing the right dust cover for some reason doesn’t stay sealed for long after you screw it on in the lock position.. I’m thinking about dropping the bumper to make sure the headlight assembly is screwed in tight enough to keep the right dust cover on tight so it doesn’t unscrew itself off causing condensation to get into the headlight assembly distorting the overall look of the entire headlight.. I have no issues with the left headlight assembly at all. Any further suggestions on how to keep the right dust cover seal shut?
I used these bulbs on my 15 and I don’t like the pattern. Sealights instructions say that they need to be at 3 and 9 to work the best, did you adjust them at all and did you aim them? Thanks
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
A most excellent video, that project was way to easy, no beat up hands, no getting angry and no swearing. My 2016 300c is due for an up grade, this has helped me big time.
I know it is a two year old video, but to save time with the airbox on the driver's side. Just remove the bolt in front of the airbox. Once that bolt is removed, you can simply lift up the entire airbox and either use long bungee or any type of hanger and hold it up using the hood latch catch or if you have someone helping out, have them hold it up and out of the way. Easy peasy 😊
Thanks for the tip
For the dust covers. Make sure you pay attention to the size of the little pieces that lock it in place. 3 are the same, 1 is larger.
Just got done installing LED bulbs on my 300. I went with a different manufacturer but this video showed me how easy it would be to do. Much appreciated sir.
Great video.
Just upgraded mine today and everything worked out perfectly. The link in the description was very useful too!!
Specs: 2018 Chrysler 300 Touring
I have a 2019 touring did you have any problem with the bean aiming directly??? They say it's supposed to be at 3 and 9 O'clock???
thanks for this video, I feel motivated to do it by myself, next week I will do it! I own a 300 2015
Amazing video, helped me tremendously. Other videos I seen are ok but I tip my hat to this being the best I’ve watched
Just picked up a 2022 300 today...thanks to your video, this will be my first mod :) Thanks!
I have to re-do mine...went out for a night drive and the lights were all messed up looking, not really lighting up the road in front of me. I guess you have to put them in a certain way. Put the stock ones back in for now and will try the white bulbs again tomorrow paying attention to how I put them in.
I just replaced mine. Thank you, Amigo. They look fantastic. I ordered them from Amazon ❤
Nice video. New to the 300 crowd. Yeah, I don’t like the halogen headlights either. Looks pretty easy to do
Great video! Other videos just showed the driver side. Thank you for the detail that you put into this video.
2019 Limited here, I was looking at the lightning dark as I’ve heard good reviews over other brands but I couldn’t find any videos with them in a 300. Gonna order these ones today.
Thank you for such a clean and easy to follow along video!
Update: they look amazing and work perfect, you might need to adjust them lower because people will think you have your brights on haha. Only issue I have is they flicker when I have my volume high (but that’s from aftermarket subwoofers, not they light’s fault)
I just did this for my 2018 Chrysler 300. It worked perfectly and took only 15-20min
Are your LED's still working good for you? I am looking to put LEDs in my 2018 300 as well. Thanks, Paul
My guy just showed us the everything 👏🙌
Really likes the look for the headlights but would prefer the Halogen more yellow light cuts thru fog a little better. Here to tell ya looks really sharp.
I have a 2017 300S, I purchased a pair and I was not able to get the cover to sit on there correctly and they burned out. Im going to give these a try, I like how everything looks like a perfect match, the fogs and the strip. Im buying this one now.
Yeah that’s why I went with these because they match the fog lights plus they are the same size as the original bulbs that way you can get the cover back on and not allow moisture or dirt and debris in.
And you didn't have to get a conversion kit either, right? Good job! I love the way it looks 👍🏻
@@BLUECOLLARGARAGE Update: They are in and look freeking amazing, they fit like OEM. I was able to get the covers back on with no problems at all. Never again am I going with HID, they would always blow out one at a time then the other would blow. No more them days are gone. These match up just perfectly with the DRL's and Fogs. So far I have not experienced any flickering.
Thnx for the video man.
@@Rosarosa50507 good to hear glad I was able to help out.
@@jeffstevenson3411 yep no conversation kit needed just plug and play.
Excellent video quality - really ppreciate the extra effort to include the driving before and after video :)
Yeah don't get no better then that
Nice clean 300! Low milage? Did you have to re-aim the headlights?
Thanks, no I didn’t need to adjust them.
Perfect clean tutorial 👌👌👌
Great video. I have a 300c 2016 almost identical to this. Good tips.
Very informative video and demonstration. Thanks Much
Great job, very informative!
Great video! I bought some but the headlights don’t point towards the road. The drivers side is casting toward the right side and it’s dark at night.
My driver side is doing the same thing it's dark on the driver side
@@joseespitia719 spin the bulb the LED is facing wrong way
I have got 2 different brands off Amazon led light both flicker then shut off completely. I have a chrysler 300c platinum, any suggestions I really want to upgrade my lights too brighter ones . ?
What year is yours? If it’s a 2015 or older you will most likely need canbus decoders like these amzn.to/3J5z8f2 and that should take care of your issue.
if it flickers you need a canbus
So do you just change the bulb or do you change the whole front headlight covers
Just the bulb
@@BLUECOLLARGARAGE thanks for the info.!!
You mention 2011-2020 300 . Was there any difference on the 300 lights for 2021-2023. I recently purchased a 2023 300.
I have the same Chrysler 300 and I will love to change the headlights to LED as well. But I need more information about this LED you are installing please. Can you please share the link . Thanks
The link should be in the video description from Amazon.
do u have a updated link for a 2014 Chrysler 300
I have 2012 Chrysler 300s awd could you please suggest me led headlights bulb?
I have a link listed in the description of the video to some on Amazon that will work for your car they will be the 9012 bulbs.
What was the Brand name of those lights
Sealight
Woot Woot Put mine in thank you Blue Collar!😂
I have a 2015 Chrysler 300 (new style) just installed some leds on it and passenger side flickers and shuts off is this something to do with canbus ? Tia
Yes you will need the canbus decoder this should take care of the problem amzn.to/3MitJDk
@@BLUECOLLARGARAGE thank you 🙏🏼
Question. Does the car come with fog lights on the lower bumper. Because I’m buying the 2018. 300 touring
Yes I believe so.
I have a 2015 Chrysler 300 S just installed the new LEDs and I’m having the same problems they’ll flicker and turn off any recommendations try to click in link but it was unavailable
Looks like sealight has updated their lights to this amzn.to/3YIjcWy
@@BLUECOLLARGARAGE do you also have a updated link for the canabus
@@ebanihinojos3455 here a link to them amzn.to/4epAiht There are cheaper ones but I’ve used these before with no issues.
@@BLUECOLLARGARAGE and this would work fine with the 2015 300 S Chrysler
Do you know if these would work for a 2022 Chrysler 300?
Yes they will work on your 2022 and same exact install procedure.
I have a 2021 Chrysler 300s do these bulbs still fit on it ?
Yes it will be the 9005 bulb.
Woah looks so much nicer
By any chance do you know if these are the same ones I would need for a 2021 300s?
Yea they are the same the 9005
Thanks for the vid.
Any updates on how the bulbs are holding up
Still going strong no issues yet.
I just bought a 2020 will these bulbs for my 300?
Yes these will work in your 2020 Chrysler 300.
This doesn't cause errors with the canbus system?
No issues on my 2016 just plug and play I know that some people with earlier model years had to buy the canbus decoder.
@BLUE COLLAR GARAGE awesome I have a 2016 300 S
How did these lights hold up?
Although my daugter has since sold the car she never had any issues with the lights.
Did you have to adjust the lights in any way? I bought some different ones and the beam patterns is off. i had to use a small allen wrench to adjust the sides and its frustrating cause it's still not even lol.
They were off by just a little bit but I never adjusted them.
Yeah I ended up buying these and while I liked that the ring was fixed and not adjustable, I noticed it doesn't fit anyway except how it was found so the LED placement was not 9 and 3, but rather 10/4 or 11/5
I have a 2015 limited and the flicker off and on the back off for good, what gives
You may need to use the canbus decoder such as this amzn.to/3VhCyhm
Link didn’t work but I get the idea
It’ll go in a 2019 300?
Yes will work on a 2019 300
Do these led bulbs have dim and bright ?
Yes has the low and high beam
@@BLUECOLLARGARAGE thnks for the fast reply!
@@BLUECOLLARGARAGE ordered the same ones you installed , work great! That driver side dust cover was tricky to get off. It took me longer to get that one off than the whole job! Thanks for your vid .
When you realize that all you had to do was take the 8mm screw out 😂
I was looking for a comment like this because I thought I was going crazy🤣
Will this fit a 2015 chrysler 300s. Ive had a few leds in the past that ive had issues with requiring a canbus coder. Will i need it with these leds?
Yes these will fit your 2015 300. You should not need a coder mine is a 2016 300 and I have had no issues just plug and play and your good to go.
@@BLUECOLLARGARAGE thanks for the reply. How are they holding up. I know the cheap ones dont last long in my opinion. So i had to go back to those ugly dingy halogen.
@@dabirdman2471 still going strong no issues at all.
@@BLUECOLLARGARAGE right on, thanks. Ill give them a try out.
@@BLUECOLLARGARAGE just installed mine today. It states that they should be 3 and 9. But when u lock them in place its not 3 and 9. Is that how yours are?
Hye brother i just got 1 thing to ask so these leds are low and high beam right? Do they come with any warranty?
Not really sure on the warranty and yes they are low and high beam.
300 uses a shutter system in the projector housing to switch to high beam, same bulbs used
Can you please tell me if your headlights were aiming right at the three and nine???
They were off by a little bit
I changed the headlight bulb because my lights are so dim . The issue I have now is that the led strip in the headlight is super dim now and I don’t know how to fix it
Does it get any brighter if you rev up the engine?
I have a Chrysler 300 2015, I bought the 9005 led and it worked for about 5 seconds and then flickered and went off; I hope the same doesn't happen with the 9012; do you recommend any specific brand and what about Watts? what is the max that we can install?
You will probably need a canbus decoder some of the 2015 and earlier models have issues when switching to led and this usually cures the problem heres a link amzn.to/3XyUt4w
@@BLUECOLLARGARAGE thanks so much
@@BLUECOLLARGARAGE however the one you reccomneded is 9005/9006 while the led for the chrysler 300 is 9012! or is it the same ? can you please help on this too, thanks
@@hayawi81 should be the same because here’s another one that says works for 9012 and 9005. amzn.to/3iSTU75
@@BLUECOLLARGARAGE thanks so much for your reply great help
Como ajustar los focos chrysler 300m 2013
Are the lights the same for the V8
Yes they will be the same
I bought the exact same led lights for my 2017 Chrysler 300 but now I started to notice condensation forming inside the right headlight unit did this happened to you ???
No I haven’t had any issues. Did you make sure the cap is sealed all the way and o ring is in good shape.
Same here.. I have a 2013 Chrysler 300 and I’m noticing the right dust cover for some reason doesn’t stay sealed for long after you screw it on in the lock position.. I’m thinking about dropping the bumper to make sure the headlight assembly is screwed in tight enough to keep the right dust cover on tight so it doesn’t unscrew itself off causing condensation to get into the headlight assembly distorting the overall look of the entire headlight.. I have no issues with the left headlight assembly at all. Any further suggestions on how to keep the right dust cover seal shut?
Does this fit 2013 Chrysler 300c??
No the 2013 take the 9012 bulb these are the ones you’ll need amzn.to/3LzrGXt
Can it fit a 2012 300c hemi
For the 2012 Chrysler 300 you will need the 9012 bulbs such as these: amzn.to/3SdaFXF
What size are the fog light bulbs
They will be the H10/9005 bulbs
@@BLUECOLLARGARAGE so basically the same size as the headlights
@@williejones8977 what year is your 300?
@@BLUECOLLARGARAGE 2017 I have the I guess srt front end
@@williejones8977 so yours might be different then. Is it the round style fog light or the rectangular style like the one in my video.
Do these actually work? Or do they shut off after 10 minutes of driving like most other LED bulbs
I haven’t had any issues at all with these bulbs they are still going strong since I posted this video.
Thanks!
Thanks bro
By any chance do you know to fix the led strip on the headlights ? Mine isn’t working
No sorry haven’t had any issues with them. So not really sure.
Will this fit my on 2013C
Yes they will fit you will need the second one listed in the description the 9012 bulbs.
@@BLUECOLLARGARAGE can u send me link
@@BLUECOLLARGARAGE SEALIGHT X2 9012/HIR2 LED Bulbs 150W 20000lm 600% Super Bright White Hi/Lo Beam are these the LEF
LED
Will those fit my 2013
Have you had any problems since the install? Amazon said this particular bulb don’t fit my car.
No issues so far still working great. What year is your 300?
2014
@@jakarishaw863 looks like the 2014 take the 9012 bulb so these should be the correct ones amzn.to/3wpXbNP
Thanks man
What about the 2013
can you link some to a 2012 chrysler 300 limited
amzn.to/3TxBpTn these will work for you. Any of the 9012 bulbs are for your year vehicle.
2018 Chrysler 300s will fit same bulbs?
Yes these bulbs will fit a 2018 Chrysler 300.
Why didn't you test it to see if the fan works and the light so we could see the fan works and the light before a completely in stall.
The fans do work I just figured nobody wanted to see it on camera. There was a couple parts in the video that shows the new lights working.
No one shows how to take that stupid dust shield off
It's a plan in the ass but just turn to the left
Fucking please someone give me an idea on how to get this off
It just twists off
Bro take the gloves off lol
I’m scared to do this last time if my old 2014 300 they burned out because of condensation
I haven't had any issues yet. We're you able to put the covers back on?
I used these bulbs on my 15 and I don’t like the pattern. Sealights instructions say that they need to be at 3 and 9 to work the best, did you adjust them at all and did you aim them?
Thanks
I just installed mine and I had to adjust them to be at 3 and 9 or at least close to it.
@@Blackavelli202 thanks. I fixed mine too