Thanks bro! Your popular. You just helped 28379 people change a headlight bulb. I was wondering how to do that and you gave me the confidence to do it on my own. Have a nice day!
Do we need a harness of some sort (anti flicker) to switch to LEDs? I have a 2017 Chrysler 300 that uses factory halogens. I switched to HIDd but don’t wanna buy another set
bought a set of these...within 5 minutes of driving with the lights on...one went out. I just got them today. I was not amused. That being said...this is a great video. Now I am on to look for a better choice.
I hoped you had done a vid of you changing the lights of the interior been looking at a couple vids but they are confusing also I found your vid because I’m was trying to find a good example of someone switching the front halogens to leds and wow way different than other channels/vids so simple and easy I even stocked around and checked more of your vids ! Liking your channel got yourself a new subscriber lol :)
For a 300s, what’s the total length of the bulbs u got? Or how much length can I get in a 300s & still seal it fully? ‘see some LED heads that have big heatsink in the rear & I don’t wanna order LED heads that won’t allow the cap to fully screw in & seal.
Finally a headlight video that is not 'shaky', the other ones gave me a headache after few seconds of watching. I want to do this for the 200, but this 300 video gives me some idea. I think I don't have to open the hood on the 200, there is an entry around the front tires.
I got a 2014 chrysler 300 with the chrome headlight housing now I got the new 2018 front bumper fits well but the headlights are my problem will they still work the same I also got HID im trying my best to make it look like the new ones but the headlights are the problem do they have the same wiring?
I have a base model 300 2018 that came with halogen lights.trying to upgrade to jud so alli have to do is buy hid?what's the brightness?I thought I had to.pay upwards to 500 or better.
Nice video! This weekend I took a trip from IN to MN and found the lights in my new to me '17 300S lacking compared to my old '02 300M Special with HID lights. I need to decide what direction I want to go.
question, since your install, did you notice any flickering / pulsating , i installed some hid bulbs in my old 300 (2006) and right away i saw a slight pulsating from the bulbs , I'm thinking of switching over to led bulbs in my new 300 (just picked up a 2020 Chrysler 300 last Saturday) but i don't want to have the pulsating i had in the past like with my hid bulbs
If your HID is pulsating it mean you charging system is going out or you have a bad ground. You might want to have that checked out including your battery. LED would blink only through the camera lens, if you were watching the LED face to face, you won't see the flashes.
Professor Cheeba is right, its' the shutter on the camera, and me NOT adjusting it. Slowing it down, will make them not move. But most people don't do it. They are not actually moving though lol. It's my camera.
@@2024CorvetteE-Ray it's not I've seen them in person doing the same thing alot of car do that it's called sequential drls your wrong why would just the lights do it and nothing else what about the LEDs in rear makes no sense lmao look at the wall you can seem on the wall
Hey guys I need some help please! I want to replace my 300s led headlights but I don't know what to buy as there are some different numbers such as 9006 hb4, 9005 hb3, h11, h9, h1,........... So which I should get?
Thanks for the instructions. I can’t get the cap back on for the life of me. My cap has fins and the LED bulb sticks out too far and hits the fins inside the cap. I think I have to shave the fins. My cap is not smooth on the inside like yours. 2014 model.
Thanks for this video! How do you compare the light performance between halogen and aftermarket LED? I’m super anal about my lighting but love the LED dogs on my 300
I've installed these in my 300 S. They look good but I don't think the shine as far as the halogen did. Which seems weird but true. Even in hi beams. When in hi bean the fog lights go out so they seem dimmer. That's my thoughts.
Check out some cougar motor led plug and play. Compact and nice. About 45 bucks. Installed in my wife Jeep. Not messsing with mine with the self leveling unless I know it can be fixed
You don't want to cover them up anyway on the back of those there is a fan and if you cover that up you're going to block the heat exchange from that fan and they're going to overheat
The do project better than Hid and farther but you have to get a good kit. The cheap kits have a different type of LED chips on it and don't project very well.
I paid $20 for mine off ebay for my 2016 300. Funny, because my last car, I paid $250 for headlights. They look so much better than the ugly default yellow lights. I hope they last though, I saw your update vid about your cars and yours only lasted 6 months.
Yknow how you watch plumbing videos and those toilets are always immaculately and unrealistically clean like they’re doing it on a model? That’s how I feel about your engine bay.
Thanks bro! Your popular. You just helped 28379 people change a headlight bulb. I was wondering how to do that and you gave me the confidence to do it on my own. Have a nice day!
😁🔥
Thanks for the video! Fog lights are a whole different story
Just ordered these and get them in the mail today for my 300s
My led lights just got here today and I got the 9006/HB4 but I’m having trouble putting them in so I’m guessing that I order the wrong one?
Do we need a harness of some sort (anti flicker) to switch to LEDs?
I have a 2017 Chrysler 300 that uses factory halogens. I switched to HIDd but don’t wanna buy another set
bought a set of these...within 5 minutes of driving with the lights on...one went out. I just got them today. I was not amused. That being said...this is a great video. Now I am on to look for a better choice.
Which headlight bulbs are they? H11?
I hoped you had done a vid of you changing the lights of the interior been looking at a couple vids but they are confusing also I found your vid because I’m was trying to find a good example of someone switching the front halogens to leds and wow way different than other channels/vids so simple and easy I even stocked around and checked more of your vids ! Liking your channel got yourself a new subscriber lol :)
So these don't need the anti flicker resister?
Thanks man. Halogen lights are light 160 bucks for this car. Just ordered what you put in.
You have a link to these type of head lights ? I have the same mode car and year .
J. Williams; Can you show how to aim the lamps, up/down, side to side? I only see one adjuster in my 300C, for up/down aim.
For a 300s, what’s the total length of the bulbs u got? Or how much length can I get in a 300s & still seal it fully?
‘see some LED heads that have big heatsink in the rear & I don’t wanna order LED heads that won’t allow the cap to fully screw in & seal.
No flicker issue?
thank you sir. any issues with heat?
any problems one year later?
Finally a headlight video that is not 'shaky', the other ones gave me a headache after few seconds of watching.
I want to do this for the 200, but this 300 video gives me some idea. I think I don't have to open the hood on the 200, there is an entry around the front tires.
What type of bulb you use to replace with
Hey bro ima get a 2014 chysler 300 you think I can fit these headlight housings (the ones from 2015-2020) on mine. WHT are the differences
Is that brand low and high beam ?
I got a 2014 chrysler 300 with the chrome headlight housing now I got the new 2018 front bumper fits well but the headlights are my problem will they still work the same I also got HID im trying my best to make it look like the new ones but the headlights are the problem do they have the same wiring?
I have a base model 300 2018 that came with halogen lights.trying to upgrade to jud so alli have to do is buy hid?what's the brightness?I thought I had to.pay upwards to 500 or better.
Nice video! This weekend I took a trip from IN to MN and found the lights in my new to me '17 300S lacking compared to my old '02 300M Special with HID lights. I need to decide what direction I want to go.
Bro you should do another video where you have them on at night. Plus what's the distance it's shooting vs the factory halogen....
What about high beams? Do they work the same?
question, since your install, did you notice any flickering / pulsating , i installed some hid bulbs in my old 300 (2006) and right away i saw a slight pulsating from the bulbs , I'm thinking of switching over to led bulbs in my new 300 (just picked up a 2020 Chrysler 300 last Saturday) but i don't want to have the pulsating i had in the past like with my hid bulbs
If your HID is pulsating it mean you charging system is going out or you have a bad ground. You might want to have that checked out including your battery. LED would blink only through the camera lens, if you were watching the LED face to face, you won't see the flashes.
A year ago you put these in how they workin now? Any problems? Do they over heat? Am i gonna burn down my 300s?
ruclips.net/video/mO0FpzsFKc4/видео.html
Does HID headlights 6K with 35W has Ice Blue? The HID will never burn like damage, right?
Would you recommend headlights from xenon hids?
Did you have to put anti-flicker cable on it
He didn’t put it.
Rick Dar But I bought mine on xenon pro today and I was told to add it.
Blake Stam so far after 3 months no flickering without anti-flicker cable
Hey man I have chrysler 300 limited awd 2015 and I just want to know why does it cost more than the Chrysler 300s
How do you get the daytime running lights to move like that
all things interesting that’s the camera doing that
@@Don_Cheeba it's not the camera if seen them driving past me doing the same thing they are called sequential drl slot of cars have them
Professor Cheeba is right, its' the shutter on the camera, and me NOT adjusting it. Slowing it down, will make them not move. But most people don't do it. They are not actually moving though lol. It's my camera.
@@2024CorvetteE-Ray it's not I've seen them in person doing the same thing alot of car do that it's called sequential drls your wrong why would just the lights do it and nothing else what about the LEDs in rear makes no sense lmao look at the wall you can seem on the wall
@@allthingsinteresting6546 LMFAO he owns the car i think he would know if its the camera or not
Are your factories self leveling?
I have self leveling headlamps and wonder if I'll encounter any hiccups
Hey guys
I need some help please! I want to replace my 300s led headlights but I don't know what to buy as there are some different numbers such as 9006 hb4, 9005 hb3, h11, h9, h1,...........
So which I should get?
Does the low/high beam share the same bulb ?
Same question
Yes it does on this vehicle
I just bought mine waiting for it to arrive
Ryan Moe you will regret it. Make sure it’s the 360 led bulb and not the 180. Hid is still the best choice to go for the projectors
Thanks for the instructions. I can’t get the cap back on for the life of me. My cap has fins and the LED bulb sticks out too far and hits the fins inside the cap. I think I have to shave the fins. My cap is not smooth on the inside like yours. 2014 model.
Just what I needed bro thanks!🙏🏽
Whats the bulb size?
It's pretty good actually. Not too expensive as well. Looks good👍👍
Thanks for this video! How do you compare the light performance between halogen and aftermarket LED? I’m super anal about my lighting but love the LED dogs on my 300
I've installed these in my 300 S. They look good but I don't think the shine as far as the halogen did. Which seems weird but true. Even in hi beams. When in hi bean the fog lights go out so they seem dimmer. That's my thoughts.
Looks great! I may have to do that myself. Thanks for showing me how easy it is!
What about the factory self leveling hid lights. Can you add them to these without Messi g up the self leveling system
Check out some cougar motor led plug and play. Compact and nice. About 45 bucks. Installed in my wife Jeep. Not messsing with mine with the self leveling unless I know it can be fixed
What’s going on j I have a 2015 Chrysler 300 s could I use the same ones you used
You'd need to verify by car.
What size are they ?
How long did they last?
Thanks for the video! Loved it 👍🏼
Glad you enjoyed it!
Y’all know if it’s the same way to do it in a Chrysler 200 2015?
Yo I’ve got the same car and bought the same exact headlights and were wondering if you had trouble getting the lights to fit in the three grooves?
My brother just bought a 2020 model but he not sure what type size is uses, neither do I
Will this work on a 2013 model since they all have the same housing and share the same projector headlights
Mebu
Yes
Have you had any problems with the lights flickering??
Nope
Deron Gray I was about to ask the same! I installed the same lights but I noticed a slight flutter when the engine is on ( noticed this at night)
Would these lights work on a 2019 charger GT ?
Find out your bulb type, then order accordingly.
thanks for the video, my dealership wanted to charge me $687.00 parts & labor.
I see they flicker, what did you do to prevent this
Flicker is from the refresh rate of the camera.
What if the whole light is out ?
Nice install! So do the headlights turn with the steering wheel too on the 300? 🔥
Not in this car.
@@2024CorvetteE-Ray ah ok.
Vrsatile mines does
Where do I order these?
You don't want to cover them up anyway on the back of those there is a fan and if you cover that up you're going to block the heat exchange from that fan and they're going to overheat
Thanks man, been meaning to do this
Did they fog up?
No issues at all, still going strong 💪🏾.
Good lights are you going to make a night video
Yes
The only thing with those they don't project as long range as hids.
The do project better than Hid and farther but you have to get a good kit. The cheap kits have a different type of LED chips on it and don't project very well.
I cannot believe how dull my stock projector beams are on my 14 300s. Kinda disappointing.
Nice video Jw
Link?
Nice Demo.Well explained.
Nice touch looks good
Tha k you for the vid. Subscribed.
Tried these on my 19 300s and they both burnt out within a couple months.
Mine are shutting off and on for a few seconds does anyone have this issue?
ruclips.net/video/mO0FpzsFKc4/видео.html
Thank u😊
Welcome 😊
I paid $20 for mine off ebay for my 2016 300. Funny, because my last car, I paid $250 for headlights. They look so much better than the ugly default yellow lights. I hope they last though, I saw your update vid about your cars and yours only lasted 6 months.
I run HID’s but only because my vehicle don’t have projector headlights. Projectors housing = LED bulbs
Nice 👍👍
Still working
no issues, works like new.
I paid well over 250 for my HIDs 6k lights and way more work to install lol 🤣😂
🤣🤣🤣🤣
I spent $180 and already had to change 2 ballasts.Going to LEDS tomorrow.
I was just about to pay 400 dollars from the dealership for some lights cause one of mine went out
Yknow how you watch plumbing videos and those toilets are always immaculately and unrealistically clean like they’re doing it on a model? That’s how I feel about your engine bay.
😂
😂
U didn't show how to get it out!!! Duhhhh
😬😬😬😬😬Im sooo doing this to my 300
Did he say $15????
Now how long do they last and did you have any problems with Fogging inside your headlights?
ruclips.net/video/mO0FpzsFKc4/видео.html