DIY Sublimation on Slate | Easy Sublimation Tutorial | Design on Canva and press! Start to finish
HTML-код
- Опубликовано: 12 сен 2024
- Hi Crafty Friends! 💚 I hope you enjoyed this tutorial on Sublimating on Slate. These came out SO beautiful. All of the products I used in this video are below 💚
.
.
.
.
14 Pack Stone Slate Sublimation blank - amzn.to/3SHcFZL
Epson 2800 Ecotank Printer -- amzn.to/4cs3i8o
Hippoo Sublimation Ink -- amzn.to/3RR2qBF
A-Sub Sublimation Paper -- amzn.to/3S0OTYr
HTVRont Sublimation Paper -- amzn.to/3Ldvtf3
Heat Resistant tAPE - amzn.to/3SH2PHm
Tape Dispenser -- amzn.to/3zwXfAM
HTVRont Auto Heat Press - amzn.to/3AqoY6q
Precut Butcher paper - amzn.to/4fFVeCM
Silicone Mat 15x15 - amzn.to/4dwM9KG
.
.
.
.
💚 Follow me on all socials! 💚
Tiktok - @Anny_Cricuts_DIY
Instagram - @Anny_Cricuts_DIY
Facebook Group - Anny Cricuts DIY
.
.
.
.
#Sublimation #SublimationBeginner #SublimationForBeginners #sublimationprinter #sublimationblanks #slate #SublimationPaper #SublimationInk #Sublimationtips #Sublimationtutorial #Sublimationtipsandtricks #sublimationblanks #sublimationprints #sublimating #crafty #craft #epsonprinter #hippooink #asub #asubsublimationpaper #blanks #heatresistanttape #howtosublimate #sublimating #cricut #cricuttips
* FTC: Some links above are affiliated links which I get a very small commission. All these links are products that I have personally tried and are my best recommendation for all of you! If you choose to purchase through my links, it does not affect you at all. It only helps me keep making crafty content for all of you! Thank you for all of the support. :)
You are really good! I had to subscribe just watching this video and the details you do! Great job
They came out beautiful
Thank you so much!
Thank you for this one. It must mean so much to you, I could hear it in you're voice. They are just beautiful. Great work 💖
It truly does
Thank you so much, I’m doing my research on sublimation and came up with your channel I’m grateful you explained so well💕
Beautiful ❤
Thank you :)
Awesome tutorial!! This just makes me want to sublimate now. I’m taking notes ❤
So glad you liked it! The Sublimation world is SO much fun
Love your personality
Aww Thank you so much 🥰
I always thought I had to use png. Thanks for the tip!
Anytime
❤
I followed your lead and made 5 memorial slates. I am very happy with them! After pressing them right side up, I read that you’re supposed to press them upside down. 🤷🏻♀️
Thank you so much for sharing this project with us. I am so looking for forward to ordering these slates and correct me if I'm wrong but you did these on your heat press at 400 degrees for 199 seconds 3 times? My cousin just passed and this is a great idea for his wife and daughter.
You are so welcome my friend! & Yes! you got it! Since I used my HTVRont Auto heat press it only goes up to 199 seconds. So I set it at 400 degrees and at 199 seconds and pressed it three consecutive times
Hi I tried doing this beautiful project but the image print out big and I size it the same way you did. Do you know what I did wrong 🙈
Hi!! I have a feeling your image sizing was changed when you were ready to print. When on your printing settings, check if your printer settings say "actual size" or if it's scaled at a higher percentage. I can make another quick video on this
How did the family like them?
Apparently I got a previous HTVRont press from the first batch. It only goes up to 99 seconds. Can you tell me your press time?
Hi Lovely! My auto heat press goes up to 199! So, for this project, I pressed the slate at 400 degrees & at 199 seconds but three consecutive times. Hope this helps