Yeah I got some of the cheap-o-eBay cutouts… leaked and rattled…simple fix cured the leak and rattle…grease the perimeter of the butterfly flap get some permatex high temp sealant #81878 put the sealant on the seat where flap meets seat. Shut the valve and leave for 24 hours. The grease will keep the flap from sticking to the sealant…worked for me.
The issue you may run into with this cheap cutout is the gearing will not be sealed and will fill with crap. That cutout won't open or close properly in a few years. Less if you drive it in dirty environments.
I got the same one on my camaro they are worth the money but over time break. Sometimes you have to double click the open or close button for it to open or close fully. But they beat the ones you have to physically unscrew to open!
Ive got one of the ebay ones that was 75$ but i wouldn't recommend them, after a few months of opening and closing it its failed to seal correctly, for example if i leave it in the closed position and go to start the car again it raddles alot and the car sounds like shit, i have to open and close it 3 to 4 times before it properly closes, i would recommend the cutout kits off summit racing they are built to last and have great review's... the extra 100$ is well worth it in my opinion, now i got to take this POS cutout off and put in a quality made one.
Ordered the same ones yesterday for my Nova Ls3 Build. Some horrible reviews on Amazon. Same Seller of course. $58 total. I'll post a video as well. You should do a follow up video man. I think that whats everyone is looking for & 1.1 million views? Hope you're getting paid for this video.
TexasNova my channel isn't monetized. And yes this video really went around lol. Thanks though I looks forward to looking at your review. I will be making one soon.
great stuff mate do you know the price that stuff? i would like put on my suburban 6.5TD must be good also!! great vedeo mate thanks for show this amanzing stuff cheers from norway
It worked fine up until the exhaust melted the cables. Sometimes it would get stuck half way open but that's when you would open it at highway rpm. Insulating the cables would definitely fix the issue. Also open and close it at idle.
@@SpeedResearchLabs See, this is invaluable information! You should really make another video. A lot of people would be curious to compare the difference from their exhaust experiences amd new ones..
if u guys are going to install cutouts in any truck make sure u guys get from an authorized store most of eBay cutouts remote control mufflers are junk only the motor that opens the valve the whole part that hold the motor is made out of plastic badly designed becaureful guys u get what u pay for!!!!
jake lindberg Why? its in my way. and axtually lowers torque+smaller piping. Just get a cat back system with around 3in/ 3.25in piping and have it bump behind the cab or infront of the rear tire.
You decided to look up this video click on it and watch it they didnt force you to watch it. Its not like they went over to your house and I said "I have to show you this video".
Yeah I got some of the cheap-o-eBay cutouts… leaked and rattled…simple fix cured the leak and rattle…grease the perimeter of the butterfly flap get some permatex high temp sealant #81878 put the sealant on the seat where flap meets seat. Shut the valve and leave for 24 hours. The grease will keep the flap from sticking to the sealant…worked for me.
Nice finishing touch with the coat hanger supporting the pipe ;)
The issue you may run into with this cheap cutout is the gearing will not be sealed and will fill with crap. That cutout won't open or close properly in a few years. Less if you drive it in dirty environments.
Good t5
I got the same one on my camaro they are worth the money but over time break. Sometimes you have to double click the open or close button for it to open or close fully. But they beat the ones you have to physically unscrew to open!
Hey man I’m planning on getting it on my v8 range sport, does it sound regular closed? Because some reviews say it leaks
Nothing like a an exhaust leak inside the cabin to put you to sleep
The Ginger Power Ranger , LOL at least its up high.
@@luxman9463 it's the only way that truck will pass California emissions
@@bigalls3661Always dump it at the rear axle
Is that a eBay weld?
Lmfaoooo
J B weld
That right there is a violation 😢
Yes, shipped it, they weld it, then shipped it back.
@@elchido3517 estimate cost was?
Ive got one of the ebay ones that was 75$ but i wouldn't recommend them, after a few months of opening and closing it its failed to seal correctly, for example if i leave it in the closed position and go to start the car again it raddles alot and the car sounds like shit, i have to open and close it 3 to 4 times before it properly closes, i would recommend the cutout kits off summit racing they are built to last and have great review's... the extra 100$ is well worth it in my opinion, now i got to take this POS cutout off and put in a quality made one.
Can you put a link for a good one
Ordered the same ones yesterday for my Nova Ls3 Build. Some horrible reviews on Amazon. Same Seller of course. $58 total. I'll post a video as well.
You should do a follow up video man. I think that whats everyone is looking for & 1.1 million views? Hope you're getting paid for this video.
TexasNova my channel isn't monetized. And yes this video really went around lol. Thanks though I looks forward to looking at your review. I will be making one soon.
Shit, I always thought to make something like this, good to know they have it available to buy. Cool
What planet are you on? Exhaust cutouts have been around for like eighty years.
If I were walking down the street and you switched you exhaust to evil mode, I think I would get scared!!
nice love the sound im goin to do the same to my charger
Mans said fuck a flange.
Its almost like an exhaust leak
great stuff mate do you know the price that stuff? i would like put on my suburban 6.5TD must be good also!! great vedeo mate thanks for show this amanzing stuff cheers from norway
look at me damn it look at these big tires on this loud heavy chevy i dont mess around 😂😂😂
This was 2 years ago. Hows the Exhaust Cut Out now? Since it was from ebay and budgeted
It worked fine up until the exhaust melted the cables. Sometimes it would get stuck half way open but that's when you would open it at highway rpm. Insulating the cables would definitely fix the issue. Also open and close it at idle.
@@SpeedResearchLabs See, this is invaluable information! You should really make another video. A lot of people would be curious to compare the difference from their exhaust experiences amd new ones..
I like the idea but doesn't the cut out being so close to the body melt stuff?!
No
if u guys are going to install cutouts in any truck make sure u guys get from an authorized store most of eBay cutouts remote control mufflers are junk only the motor that opens the valve the whole part that hold the motor is made out of plastic badly designed becaureful guys u get what u pay for!!!!
You need to go file a lawsuit against whomever taught you to weld.
California calls for desperate measures
Real men get dual exhaust
jake lindberg Why? its in my way. and axtually lowers torque+smaller piping. Just get a cat back system with around 3in/ 3.25in piping and have it bump behind the cab or infront of the rear tire.
Hahahaha..this is funny
+Snipe Stud00 I have dual 3 in pipe 🤔
Real exhaust gets men
bad placement.
I didnt know that ebay produces that thing ;) But hey why should someone else sell his stuff on ebay, so they have to be the producers right?
Yea eBay is printed on the side
Oh lol its okay, and it sounds nice
Frank and the people who have
No les hagas caso, esta chingon jajajaja todos puñetas
How does it smell?
Sexy 😋👍
dope
Is the y-pipe a slip/lap fit or butt? Seems like all the ebay kits are not lap fit
Ben Dayho I am not sure what youre asking me. both pipes are diagnoly cut length wise same then welded together. I'm not sure if I answered your ?.
I got mine today..Not slip fit. Requires a perfect to length.
Ben Dayho I see what you mean. the muffler shop expands the pipe for the overlap. it shouldn't be an issue
Correct, my last kit was expanded already
That's cool man, sounds beefy as fuck!
cut out impecable
Sounds horrible
Corey Ridings youre welcome
Corey Ridings hk
DEY WEY this truck sounds like shit and has a short dick lift kit on it if anything he should get rid of that tonka truck
Uwewewewu uwewewewu omeuewewe osas😂
Tengo un Toyota mr2 y quiero ponerle uno como cuanto sale ya instalados
Salen Como 500 dolares
Can you send the ebay link? Thanks.
www.ebay. com/itm/301864084592
remove the space after the dot
Can anyone tell me what the mesh looking thing is near it??
Just a small flexible joint connector. Gm does it at the factory and auto stores sell it. I know as ive sold plenty and saw under the newer gm trucks
Way to RICE UP your American pickup.
Wheren can buy that frend?and you know how much it?
Kurwa ten to kanału nawet nie potrzebuje XDDDD
Kira Games Grink da heny z blay. Spk dih blah cdpg kilp plah..
o polak XD
Bo to są prawdziwe samochody
Déjalo abierto siempre 😂😂😂 suena mejor
Where you blind folded while welding
Ld
Défi. Medoa
i want it man
What brand where they and are they still good ?
Fernando Beltran ebay no brand. Its gets the job done.
WHY?
Question...does it add more power???👍
onajurecjhay1 In big car with big engine ? No.
In small car with small engine (1.0/1.2) little bit. Maybe 1-5KM
E we donde conseguiste esa pieza??
is it cammed or does it have headers?
SEPPY THE VIRGO TURTLE sorry for the late reply. The truck is stock.
What state are you in?
Peter Morrell SoCal
Those flex pipes will not last like that
Oh why did you have to show me this?
You decided to look up this video click on it and watch it they didnt force you to watch it. Its not like they went over to your house and I said "I have to show you this video".
Notification thank some people just really show off their challenged mentality.
: )
Прикольно
Looks like you're spitting fuel
Water
🇹🇭❤️🙏
Disculpe cuánto sale ya instalado
EBay green card
Ghange car or exhaust !!!
You kill the engine
some body is.a tube welder
How is it holding up?
Timothy Bolden it has trouble closing and opening sometimes. It still works though.
Sals Fz09 Thanks. Gonna grab one for my truck as well
Guten tag
05 Deputat guten nach
Goturtag
Время летит три года прошло 🤦🏻♂️
эй где купить.
Terrible idea
رقاوي يشفط لايك
what a mess
Like your videos
@@SpeedResearchLabs You right
cut out impecable