bro u should not drive new bearing cap like this if you beat directly it will makes marks and scratch on the new cap hence use the old removed cap and place it on the top of the new one and then drive it in the place. nice video man, another tip for you guys is that if the ktm parts are not available you can use pulsar cone set and dominar oils seals for fork good work man keep it up.
Bhai mujhe ktm duke 390 ki handle ko nikaalkar ktm rc 390 ki handle ko lagana hai,,,,kya ye possible hai ,,,,,,agar hai to kya ye success hogi please bhai tell me🙏🙏🙏🙏🙏🙏
nice bro,it happen to b my front fork n steering bearing also swingarm bearing had to serviced next month..n ur video came out,help me a lot just a question..wat names is dat fork dust seal da bigger one..because my bike do not have dat n next time can u list wat tools n size of tool do u used in da video in description I also found some mistake on ur services..the fork should compress after u pour fork oil to prevent bubble..also fork lubrication better use a dip of fork oil n cleaning using wd-40 or any penetrating oil..because da spray u used might b bad for rubber,dats all thanks n greeting from malaysia
Need help! Changed both my fork oil seals yesterday and they put two bottles (150 ml each) of fork oil into each fork and now it shakes like crazy and makes dhak dhak noise whenever riding on bumpy roads...is it because they put 300 ml fork oil instead of 400 ml, bro??
KTM ( Duke 390) or CBR 250? Long term usage is intended. Bike should be reliable and not fail in the middle of nowhere. I heard that KTM still has a few display bugs. And KTM is notorious for coolant oil mixing. How reliable is your RC 390 and do you suggest one? I am not a technical specialist like you and won't end up in changing maps and tuning on the bike. I would be riding it stock. KTM or CBR?
Well you r definitely right about oil coolent mixing in KTM 390 & bajaj dominar,CBR 250 is great overall..or else you can go for any 300cc bike..just make sure it has ABS..!!
Best work bro..no chit chat only work and best one...thank u
bro u should not drive new bearing cap like this if you beat directly it will makes marks and scratch on the new cap hence use the old removed cap and place it on the top of the new one and then drive it in the place. nice video man, another tip for you guys is that if the ktm parts are not available you can use pulsar cone set and dominar oils seals for fork good work man keep it up.
Going to work on my own bike and not pay the garage after watching these vids
Thanks for this vid bro.. Lots of ideas nd knowledge.. Ride safe and God bless
wow you know a lot about mechanical servicing. thumbs up for you brother.
Your videos always super
hello sir aap se ek hel chaiye tha
35×48×10.5 es number ka fork seal lagta hai esme ya dushara
Which bikes oil seal you used? Dominar?
Gjb h bro video
Bhai mujhe ktm duke 390 ki handle ko nikaalkar ktm rc 390 ki handle ko lagana hai,,,,kya ye possible hai ,,,,,,agar hai to kya ye success hogi please bhai tell me🙏🙏🙏🙏🙏🙏
First comment bro... 😍😍 Bhai please apna service center kholo.. 😘👍👍
U king boss ktm rc 200 super
Nice video,make some video about diy fender eliminator also for rc.waiting for your next uploads.....
What motorcycle did you buy the seals for? I see that they are BAJAJ brand. I love your videos, they are very good.
Please make a video on how to adjust tappets for FZ V2.0 if possible.
Great video. Thanks Brother.. Learnt a lot..
Clean work (y)
Bro can you please tell me how to replace the fork inner tube of Duke
nice bro,it happen to b my front fork n steering bearing also swingarm bearing had to serviced next month..n ur video came out,help me a lot
just a question..wat names is dat fork dust seal da bigger one..because my bike do not have dat
n next time can u list wat tools n size of tool do u used in da video in description
I also found some mistake on ur services..the fork should compress after u pour fork oil to prevent bubble..also fork lubrication better use a dip of fork oil n cleaning using wd-40 or any penetrating oil..because da spray u used might b bad for rubber,dats all
thanks n greeting from malaysia
how much bro total for fixing me too having same problem
Vedio pota anubavikanum ariyakudathu. 😂😂
How many oil seal needed in 1 telescopic?
BUEN VIDEO !
Nice detailing .Excellent work brw👍 . very helpful keep it up
Need help! Changed both my fork oil seals yesterday and they put two bottles (150 ml each) of fork oil into each fork and now it shakes like crazy and makes dhak dhak noise whenever riding on bumpy roads...is it because they put 300 ml fork oil instead of 400 ml, bro??
What vehicle fork oil seal (Bajaj)? Sir! & Fork bearings
Good informative video
Bro are the seals genuine from ktm?
How to get them?
Donde consigo los tapones empaques o lo que le coloca ala orquilla de color negro ???
Which oil seal of bajaj bike are you used in this video?
What is the part number fir the cone set, can you share that.
Good
Hello sir . 400ml for right and left fork?
hi...can l know the length of the fork...#mm...TIA
Awsm video. .bro...
KTM ( Duke 390) or CBR 250? Long term usage is intended. Bike should be reliable and not fail in the middle of nowhere.
I heard that KTM still has a few display bugs. And KTM is notorious for coolant oil mixing.
How reliable is your RC 390 and do you suggest one? I am not a technical specialist like you and won't end up in changing maps and tuning on the bike. I would be riding it stock. KTM or CBR?
Well you r definitely right about oil coolent mixing in KTM 390 & bajaj dominar,CBR 250 is great overall..or else you can go for any 300cc bike..just make sure it has ABS..!!
@@powerpulse.motorsports
Thanks for your reply! I shall choose the CBR or RR then
Osm😍😍
So it doesn’t have coil spring inside uh??
from where you get all the knowledge brother
What was the price of that sterring bearing kit?
How much that lashing blet costs ?
which oil did u use for the fork ?? plzz reply
The one recommended by KTM Manual 450ml in each
What is part of spear plz batao
Where are you from bro..?? My bike is suffering from same problem...want your help..
I am from Paras
After how many kilometres you got this problem
Fentastic
Awesome
Preparing before top speed run .huh....... dońt forget to check ur brakes before ....
Bearing cone set price how much bro ktm rc 200
ThnkuDaDa
Super
Bhai ktm bike ka ya pulsar ka shoker upr ya niche krna ho to mujh se contact kree jitna mrzi upr lr du ga jitna mrzi niche kr du ga
Thanks bro
How much did all Handel bearings cost bro
👍👍👍👍👍👍
Bro ye sab parts kaha se liye ??
Bro r u a professional mechanic??
Bro fork seal ka part number kya ha
ye mechanical wala h kya
Bro forks ka price kitna para
You need to clean your bike more often. The dirt you showed on the fork is what destroys the seals.
Part number oil seal
Are bhy app ne to ktm ko fassi ki saza de di
AP Azad mechanic
P
Hacker