Great video. just tie the brake levers pulled in using a tie or rope for overnight and all the remaining bubbles inside the brake lines would come up into master cylinder which would give a punchy feel next morning .
@@powerpulse.motorsports it wont never heard of anything like that . Yeah obviously you might get error with abs signal which can be removed from the ecu and you are fine again.
Bro you are a ktm doctor . Respect your work👌👍 and also i have a ktm so wanna know about some problems that i face with my bike so can you just help me out?
nice work.it looks more beautiful and interesting if you speak together. You didn't tell that ABS is off or not , Bike key is off position or on position.
I'm using a aftermarket brake master cylinder. On agresive braking the lever moves out. I guess heat. On cooling down the lever comes back to original position. I had been using this since January but this issue I'm seeing since past month. Using steel braided lines and sintered brake pads. 2018 Ktm RC 390. I would guess my caliper or disk is causing this. Any idea ?
excellent work bhai the front brake pads for 390 cost around 1800 rs as they are synthetic but the one which you are using is 355 rs is it fine please let me know if i can use the same you!
Hello brother I have some doubts about Termination unit..can u plz clear that.. Termination unit Located Exactly back side of Horn This unit on my Rc 200 getting overheated after 5to8min of ignition key turned On" position.. is it normal? Or any issue? What is the actual use of this unit? There is Any further issue if I ignoring the heating issue? Part no jb40 1405
Great video Just one question, what exactly do u mean with the warning at the end of the video? What technique do you refer to that should not be applied to abs bikes? Kinda confused me a bit because your bike is ABS though.
Dude - I got my motorcycle washed from a car wash center nearby and then they applied some polish to make it look squeaky clean and new...and while that worked, i don't know what has happened, my brakes, both front and rear have lost almost all of its stopping potential...it's not air I can assure you....so no bleeding that is required....there's feedback on the levers, but i get no bite even while applying full force. Can you suggest me whats gone wrong? and mine is a new motorcycle, just 3 months old and i've only clocked 2.5K KMs... Please advice, I have a 250 Duke BS6 that comes with the 390 LED headlight unit....
@@bikerboy7314 they use diesel and some oil to clean the bike and make it look shiny..also they may or have accidentally used it on the discs..just need to clean and wash the discs with soap and keep it dry
Bro i have Duke 390 abs model But i have one problem When i take mrng time my bike Abs will working after then the Abs light will on its not working i asked in ktm showroom they said Abs module is gone so I was confused what I can do bro tell one solution
Abdul Azad try to go for full ecu checkup must be some fault codes are not wiped after repairing some wiring related to brake system , 2) check your abs ring even a slight bent can effect abs system 3) abs motor is not working anymore. In my case it was bad abs ring it was bent just in few mm
One of the most informative video I have seen. It was much needed! and you nailed it be adding the part numbers :)
I can watch this all day long. Very informative. Keep doing the good work.
That's some serious detailed work.
Found it thankyou for letting me know in the other video your a champ, finally this saterday the full brake system will be installed 🙌❤️
Quite interesting & informative, excellent work!
Im a new owner of ktm your video help me alot especially the obd video👍🏻👍🏻👍🏻
Right on brother.. I own a 2017 ktm Rc390 and I love watching your videos! Keep up the great work 🎉💯👍
You got some excellence bro loved your work
I respect ua works bro but it's very difficult to find the Ktm parts in local markets
Thank you so much, this video helped me to assemble the break system, great work👍🏻
Break or Brake??
kiya baat hai yaar. etana achese sab work kiya. ek number bhai. kash apki vaha rehta mebhi meh bhi kuch sikh leta.
Great video. just tie the brake levers pulled in using a tie or rope for overnight and all the remaining bubbles inside the brake lines would come up into master cylinder which would give a punchy feel next morning .
@27:42 not suggested for ABS bikes..it can damage ur ABS Pump..!!!!!!!!!Bleed using proper tech or a vacuum pump if not done properly!!
@@powerpulse.motorsports it wont never heard of anything like that . Yeah obviously you might get error with abs signal which can be removed from the ecu and you are fine again.
Sir what a video..💕
bdw REAR master cylinder KIT ktm pe nhi milta... kaha se lena hoga kya bolkar....???
Replace bleed valves with speed bleeders. It makes life easy in long run.
Nice tonny bhai 😍😍💜
Thanks man...Cheers!!!
@@powerpulse.motorsports 😍
Brother you are just amazing. Phenomenal work.I'm glad i subscribed to your channel yet again.. and this is the top maintained 390 I've ever seen. 👌
Thnks Man..!!
very good, precise and detailed video
v good video bhai ye kit delhi me kahan milegi meri bike ka rear piston jaam h
Bro mere Rc200 ke pilion sit ke niche airbox mein ek nut ghus gaya hai,kays bho engine tak ja sakta hai🙄???
Bro you are a ktm doctor . Respect your work👌👍 and also i have a ktm so wanna know about some problems that i face with my bike so can you just help me out?
Good 👍 nice 👍 👌 👏
This piston kit can fit Apache rr310 because both caliper looks same
tyyy brooo ive always wanted to learn caliper mechanism
Please make video of hydraulic clutch retrofitting on bike
You rock man!.. keep it UP.
nice work.it looks more beautiful and interesting if you speak together. You didn't tell that ABS is off or not , Bike key is off position or on position.
Were you employed as a technician or mechanic before? This stuff is great! Keep posting! Cheers.
Just an Engineer brow..!!Cheers!!
@@powerpulse.motorsports Kudus to keep the passion burning, and in the process helping people out. Don't stop! Big shout-out from Chennai.
Bro. How to set abs for non abs ktm bikes .video poduga
Bhai rc series continues rkhan
Please make video on rear suspension change..
Sir with due respect plz upload all part service of rs 200
Super work
Good work. Perfect.
Again a great video
Hello. Tell me why there are 2 holes in the muffler, are they needed there? It's just that my plastic gets hot because of them)
Amazing brooo
How did you study this bro, its kind a hardwork
caliper sealant kaha se mila bhai
Thank you for this awesome video! :)
Respect your work, nicely shown.
what did u do with u r zmr after accident..why u are not posting any videos.
Excellent indeed!!!
What is the interval of kms or time period to replace or service
Around 15000 or whenever u feel like spongy or hard brakes
Bro...why is the front brake fluid colourless and rear which is not.... .
Brake fluid should be clean.. If it's dirty, change it... ✌
Brake fluid should be clean.. If it's dirty, it should be changed ✌
New caliper seals kahan se mili bhai
Thnx bro it really helpful.... & can you tell me the name of background music
And what rear tyres are you running, the sidewall looks taller.
160/70 Dunlop..!!
Bro horn ka fus kedr ak video bana doo plz
Bhai this bike n new ugdominar has same caliper. 4piston?
Bro please share the part number of the front caliper oil seals
Bro front brake pump kit from where you have purchased?
I'm using a aftermarket brake master cylinder. On agresive braking the lever moves out. I guess heat. On cooling down the lever comes back to original position. I had been using this since January but this issue I'm seeing since past month. Using steel braided lines and sintered brake pads. 2018 Ktm RC 390. I would guess my caliper or disk is causing this. Any idea ?
Any solution???
@@drx3718 not sure. I changed my brake calliper and that sorted it out for me.
You mean full caliper or piston and rubber seal??
@@drx3718 full. I was suggested not to rebuild since it may fail
@@drx3718 full calliper
Can i perform same method for bleeding as my bike has ABS unit or is there any other method please suggest btw great video
Hello Sir, can we install TVS 200 slipper clutch in Karizma zmr
Ktm's have steel braided brake lines in rear?
yup
Amazing bro...could u please link parts too where u get online
I need link
Perfect 👌
Bro i have rc390 in my home and repairing my own bike is a hobby where can i get the workshop manuals for ktmrc390 2016 india version
Where can I get the parts for this? My local KTM dealer here in Texas says KTM does not list the minor kit parts
Bro RC 200 brakes also same right
My rc rear break air volve is jammed and it's edges got smooth I can't open it..any suggestions?
A que km se realiza esto.
excellent work bhai
the front brake pads for 390 cost around 1800 rs as they are synthetic but the one which you are using is 355 rs is it fine please let me know if i can use the same you!
Bro,i changed my both brake pads but after changing front brake pad,it's little bit tight while i rotating a wheel
Any solution
Bro upload next video on new topic
bhai zmr me kon sa oil dalta hai
Hi! Nice video! Can you please tell me when do i need to change Master Cylinder Pistons?
Do you bleed while the engine is running?
Nyc presentation bruh
Sir where can buy the brake caliper seals master cylinder?
Bro make video on how radiater wash 🧽
Hi wondering if you know about remapping wagon r ECU (4 cylinder). Thanks.
Bro this caliper seals availeble in ktm ?
Very good
Hello brother I have some doubts about Termination unit..can u plz clear that.. Termination unit Located Exactly back side of Horn
This unit on my Rc 200 getting overheated after 5to8min of ignition key turned On" position.. is it normal? Or any issue? What is the actual use of this unit? There is Any further issue if I ignoring the heating issue? Part no jb40 1405
Bruhhh Your Bike Which year model bruhh
klasse 👍
why cant do this ABS brake?
Whats the part no. Of all the things?
Bajaj which bike part master cylinder piston front brake
Bro speedo meter speed is calculated from which abs sensor. My 2015 RC 390. Shows 0 kmph while riding too.
From Front sensor..!!
@@powerpulse.motorsports abs sensor and the speed sensor are all the same can you mention the part number plz
Bro what action camera u use for more blogging??
Great video
Just one question, what exactly do u mean with the warning at the end of the video?
What technique do you refer to that should not be applied to abs bikes?
Kinda confused me a bit because your bike is ABS though.
Holding the brake lever in with piece of string. Don't do that.
@@1000sofusernames Why?
Great video btw
@@1diegosv I think it's to do with getting air into the abs system. Very hard to fix if you do.
Is this seal can be used in rr 310 bs6 ??
Pls rply
Amazing
Bro do ktm dealers give spare parts outside?
What's the price of the kit
Do you need Pulsar 220 for new video updates 😆😆😅
Bro my rs200 has single channel ABS is it safe to perform this kind of bleeding for the front brakes ?
27:42
Dude - I got my motorcycle washed from a car wash center nearby and then they applied some polish to make it look squeaky clean and new...and while that worked, i don't know what has happened, my brakes, both front and rear have lost almost all of its stopping potential...it's not air I can assure you....so no bleeding that is required....there's feedback on the levers, but i get no bite even while applying full force.
Can you suggest me whats gone wrong? and mine is a new motorcycle, just 3 months old and i've only clocked 2.5K KMs...
Please advice, I have a 250 Duke BS6 that comes with the 390 LED headlight unit....
Did you resolve the issue??
@@parthabarman6290 yes
@@AniketSenhow it was solved?
@@bikerboy7314 they use diesel and some oil to clean the bike and make it look shiny..also they may or have accidentally used it on the discs..just need to clean and wash the discs with soap and keep it dry
Where can I buy these repair parts
ye mechanical wala h kya
Bhai bhai ek problem hai vah Sal Nahin ho raha hai aapse baat karni hai please contact karo
❤️❤️❤️
Bro i have Duke 390 abs model But i have one problem When i take mrng time my bike Abs will working after then the Abs light will on its not working i asked in ktm showroom they said Abs module is gone so I was confused what I can do bro tell one solution
Abdul Azad same problem 🙄
@@wolvesonwheels what can do
Abdul Azad try to go for full ecu checkup must be some fault codes are not wiped after repairing some wiring related to brake system , 2) check your abs ring even a slight bent can effect abs system 3) abs motor is not working anymore. In my case it was bad abs ring it was bent just in few mm
@Wolves On Wheels I changed new abs ring and abs speed sensor again the same problem what I can do
👍👍👍👍👍
Ur rc390 looks same as rc8r
我看也像😂
MRP ₹₹ plz.. For all spares and oils
Can the dislikers do better service than this?
🤬
👏👏👏👏👏👏👏👏👏👌👌👌👌👌👍👍