⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCk_lcDzEWLs5fVRYceK3-9Q ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I have a issue with my journey. It will not start with push start. When pushing brake and push start I just hear a click . I've replaced the brake light switch along with the battery current sensor. Still will not start could that mean the starter is bad.
If anybody has this issue like I do. There was a recall on certain dodge journeys to replace the driver door wiring harness which can break a wire and lose power to the switches. What I’ve found so far is it could be the fuse-under the hood driver side fuse box 2009-2010 Under pass glove box 2011+ Driver door wiring harness Driver door control module Driver door switch
I have a 2011 Dodge Journey. Since lots of water got in the door due to leaving windows down while heavy rain, had to replace malfunctioning master window switch, another problem remains parking lights come on intermittently while ignition and light switch off , as a result this is draining all battery charge. I suspect the door control module had a short in it. To troubleshoot I removed fuse# 122 but nothing lost power in the door. What's your opinion?Pllease help!
My 2014 Journey has a driver's side mirror electrical problem.. first smoke came out, all my windows work fine, it's just the driver's side that the mirror keeps moving to the left by itself, I can hear the electric motor Workin and pushing it to the left.. even when the car is good it keeps moving, Soo I disconnected the battery, that was the only way it would.. stop .. any idea???.. already pulled out the fuse 124, or something like that.. still keeps moving??
Most if not all of his RUclips information on Dodge Journeys don't even pertain to the 2009 because I've watched his videos and not a one of them matched up to the actual door and door panel
@@joen5332 has anyone responded to your statement because I also have a 09 and have the same problem. Trying to locate the fuse or see if there is a reliable test method? I am an electrician and have a meter.
@@ShannonFlippo no one responded to me but I did get it fixed all I had to do is unplug the connection for a few seconds plugged it back in and the little ticking sound quit and I could roll up and down the windows with no problem as of today still have not had no more issues
@@joen5332what connection did you unplug in the door panel or in the fuse I'm having problem just my windows won't work everything else does fuse is good
my dodge journey 2018 passive entry not working somebody recommend to replace RFH modules with key nob theres no problem doors opening but by hand touch not respond pls can u advise more thanks
I have the same problem on my 2010 journey like in the video. My mirrors are not working, my front windows are not working and look and unlook are not working from the driverseat. Only the back windows are working. I change the driverseat swichmodule, check the fuse and kable. But my journey dont have a fusebox on the passangerside. Can enybody help me i dont know what i can do next
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos:
ruclips.net/channel/UCk_lcDzEWLs5fVRYceK3-9Q
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Hi hun what’s
Hi hun what’s
I have a 2009 Dodge Journey and i Don't have a Passenger Fuse Box. I just have the Fuse Box located in the engine bay. Where can i find the Fuse??
I have a issue with my journey. It will not start with push start. When pushing brake and push start I just hear a click . I've replaced the brake light switch along with the battery current sensor. Still will not start could that mean the starter is bad.
If anybody has this issue like I do.
There was a recall on certain dodge journeys to replace the driver door wiring harness which can break a wire and lose power to the switches.
What I’ve found so far is it could be the
fuse-under the hood driver side fuse box 2009-2010
Under pass glove box 2011+
Driver door wiring harness
Driver door control module
Driver door switch
Hello . I have 2017 CHRYSLER PACIFICA there code on it B1830-11 , B182c-11 I checked the fuses it is okay which other case so we check it
I have a 2011 Dodge Journey. Since lots of water got in the door due to leaving windows down while heavy rain, had to replace malfunctioning master window switch, another problem remains parking lights come on intermittently while ignition and light switch off , as a result this is draining all battery charge. I suspect the door control module had a short in it. To troubleshoot I removed fuse# 122 but nothing lost power in the door. What's your opinion?Pllease help!
I can still open my locked door from inside, don’t know what could be the problem in Dodge durango 2013 model
My 2014 Journey has a driver's side mirror electrical problem.. first smoke came out, all my windows work fine, it's just the driver's side that the mirror keeps moving to the left by itself, I can hear the electric motor Workin and pushing it to the left.. even when the car is good it keeps moving, Soo I disconnected the battery, that was the only way it would.. stop .. any idea???.. already pulled out the fuse 124, or something like that.. still keeps moving??
Hello, where would that fuse be on a 2009 journey? Because there is no fuse box under my glove box.
Most if not all of his RUclips information on Dodge Journeys don't even pertain to the 2009 because I've watched his videos and not a one of them matched up to the actual door and door panel
@@joen5332 has anyone responded to your statement because I also have a 09 and have the same problem. Trying to locate the fuse or see if there is a reliable test method? I am an electrician and have a meter.
@@ShannonFlippo no one responded to me but I did get it fixed all I had to do is unplug the connection for a few seconds plugged it back in and the little ticking sound quit and I could roll up and down the windows with no problem as of today still have not had no more issues
@@joen5332what connection did you unplug in the door panel or in the fuse I'm having problem just my windows won't work everything else does fuse is good
@@carissajohnson5994 I unplugged each one of them that went to the controls to the windows in the driver side front door
why would the a/c constantly be running if the heater core was bypassed
Good afternoon hun
I changed the fuse.
Please help. Power locks and windows don’t work. On both sides. I think fuse is ok
Same here my fuse is good
Not the fuse. It works then it does not work. Any suggestions??
my dodge journey 2018 passive entry not working somebody recommend to replace RFH modules
with key nob theres no problem doors opening but by hand touch not respond
pls can u advise more thanks
Did you get the problem fixed?
I have the same problem on my 2010 journey like in the video.
My mirrors are not working, my front windows are not working and look and unlook are not working from the driverseat. Only the back windows are working.
I change the driverseat swichmodule, check the fuse and kable. But my journey dont have a fusebox on the passangerside.
Can enybody help me i dont know what i can do next
Did you get it fix I’m having same problems
@@dawnmarie3400 hey yes
It was the driverdor module
@@hamburgbeats111where it is ,i have 2011
@@hamburgbeats111 where is the interior fuse box located? I'm having the exact same problem that you had
Omg we have exact same problem if you're out there how did you fix it?
Plus door switch
This doesn't apply to 2010 Journey because there's no fuse box inside.
That doesn't help if the fuse is good