I like that there is no football or pain in the ass system. The tension can be applied with one hand and then set the screw with the other. I’ll be buying one when I upgrade my current bow as well.
PSE changed their design from the Levitate and lowered their roller guard bar significantly for the Mach 34 & Mach 30 bows. Unfortunately, this was done after the Gen 8/8X Series was released. Therefore, the Gen 8/8X does not fit on the Mach 34 & Mach 30. However, that doesn't mean there is not an arrow rest in the final prototype stage that may soon come out and will fit on all IMS bows that are currently on the market. Stay tuned.
I have a Mach 30 and ran into this exact problem too. Super annoyed that I have a rest that is below the berger button hole and have to tune it w the d-loop. If they don’t come out w something quick, I guess it’s QAD…
Hi Vapor Trail. I recently purchased the 8x rest to go on a RX-7. I noticed there is a little dimple on the backside of the rest where it mounts onto the pic rail on the bow. It seems to make the rest fit flush against the rail. Is this intentional? Thanks.
That is the set screw designed to prevent the arrow rest from sliding up or down the rail. If you pull the elevation locking screw out and remove the housing from the main bracket, you can adjust that set screw.
I like that there is no football or pain in the ass system. The tension can be applied with one hand and then set the screw with the other. I’ll be buying one when I upgrade my current bow as well.
Gunna buy this asap
You won't be disappointed. Best arrow rest on the market!
Fantastic product!! 💥💥
Have the Gen 7, pretty happy with it. 👍🇺🇸
That's awesome! Thank you!
Will this new lower profile arrow rest work with a PSE Mach 30? The old gen 8 model hit the new style roller guard
PSE changed their design from the Levitate and lowered their roller guard bar significantly for the Mach 34 & Mach 30 bows. Unfortunately, this was done after the Gen 8/8X Series was released. Therefore, the Gen 8/8X does not fit on the Mach 34 & Mach 30. However, that doesn't mean there is not an arrow rest in the final prototype stage that may soon come out and will fit on all IMS bows that are currently on the market. Stay tuned.
I have a Mach 30 and ran into this exact problem too. Super annoyed that I have a rest that is below the berger button hole and have to tune it w the d-loop. If they don’t come out w something quick, I guess it’s QAD…
Hi Vapor Trail. I recently purchased the 8x rest to go on a RX-7. I noticed there is a little dimple on the backside of the rest where it mounts onto the pic rail on the bow. It seems to make the rest fit flush against the rail. Is this intentional? Thanks.
That is the set screw designed to prevent the arrow rest from sliding up or down the rail. If you pull the elevation locking screw out and remove the housing from the main bracket, you can adjust that set screw.
ruclips.net/user/shorts0uwPXmRNlUc?si=okNraMYISbvna19x
@@vaportrailarchery93 Perfect! Thank you!
So wie der zieht hat der Bogen Max.40 lbs 😂😂👎