Thank you very very much they told me the same thing that I need it to get a new radio I’ve been driving around like this for two years thank you Sir!!!!
Following the tutorial on using the radio's diagnostics (link below), I discovered that my radio was not receiving dimmer signals. Also, this particular fuse was blown. I replaced it and eventually that burned as well. So there is a short somewhere. Coincidentally, this issue arose when I installed an aftermarket Android radio. Next step will be to uninstall this new device and see if things go back to normal. - - - - - - - To turn on the radio's diagnostics program, press-and-hold "1" and "6", then press the POWER button. Press "4" to enter the dimmer test (as shown in the video). ruclips.net/video/PkOuuDqEt_0/видео.htmlsi=psf6aWA4tZN0UT-i&t=54
Thank you very very much they told me the same thing that I need it to get a new radio I’ve been driving around like this for two years thank you Sir!!!!
this was so much more helpful than anything ive seen online or on forums, thanks so much !!!
On my Accord 2010 EX fuse number 6 on passanger side is for gear lever and coin holder lights.
I tried changing that fuse, but it didn't work at all. Any suggestions?
very helpfull, thank you.
Your the best !
I changed the fuse and guess what? Lights are still out.
I'm having the same issue as you on my 2011 Honda Accord but every time I put a new fuse in it just blows it any idea what it could be
THANK YOU!!!!!
Gracias 🙏 solucione el mío
THANK YOUUUUUUU🎉🎉🎉🎉🎉🎉
For some reason my still didn’t work 🤔
what causing the fuse to popped?
hate to say this that was not the problem on other sub-models.
isnt number 6 the abs/vsa fuse. Im not sure how that would affect the radio lights. do you know?
Vsa/abs is on drivers side
Thats for interior lights, were they not working either?
So I checked the fuse and it was blown but still no lights smh. Idk anymore.
Didn't work for me
Following the tutorial on using the radio's diagnostics (link below), I discovered that my radio was not receiving dimmer signals. Also, this particular fuse was blown. I replaced it and eventually that burned as well. So there is a short somewhere.
Coincidentally, this issue arose when I installed an aftermarket Android radio. Next step will be to uninstall this new device and see if things go back to normal.
- - - - - - -
To turn on the radio's diagnostics program, press-and-hold "1" and "6", then press the POWER button. Press "4" to enter the dimmer test (as shown in the video).
ruclips.net/video/PkOuuDqEt_0/видео.htmlsi=psf6aWA4tZN0UT-i&t=54
@@frankly8087 thanks Brother 💪🏽👑
Porque cada que lo cambio se vuelve a quemar???