Blasting, Painting and testing | Profile Test | Salt Test | Dust Test | Airless Spray Painting

The oil and gas plant, shipp building, fertilizer plant, off shore, and power plant are not following normal residential painting method. On the contrary, the atmospheric situations of the painting or coating , the quality of the paint, the method used to clean the surface, and the equipment required, are critical to the quality of the painting until visual quality. Here are just a few of them.
Blasting and Painting | salt contamination test | dust test | profile test
The Malix On Air (Malix Cater Channel) intends to
enhance Technology, Agriculture,Engineering,
Traveling, Food preparation and Art.
Please try to exchange of information among you
നമ്മുടെ വീട്ടിലും മറ്റും അടിക്കുന്ന പെയിൻറിംഗ് രീതിയല്ല ഓയിൽ ആൻഡ് ഗ്യാസ് പ്ലാൻറ്, ഷിപ്പ് ബിൽ ഡിംഗ്, ഫെർട്ടിലൈസർ പ്ലാൻറ്, ഓഫ് ഷോർ, പവർപ്ലാന്റ് തുടങ്ങിയ സ്ഥലങ്ങളിൽ അനുവർത്തിച്ചു പോരുന്നത്. മറിച്ച് പെയിന്റ് അല്ലെങ്കിൽ കോട്ട് ചെയ്യാനുള്ള അന്തരീക്ഷം, അടിക്കേണ്ട പ്രതലം ഒരുക്കുന്നത്, പ്രതലം ക്ലീൻ ആക്കാൻ ഉപയോഗിക്കുന്ന രീതി, അതിനാവശ്യമായ യന്ത്ര സാമഗ്രികൾ തുടങ്ങി പെയിന്റിംഗിന്റെ കാഴ്ചക്കുളള ക്വാളിറ്റി വരെ നിർണ്ണായകമാണ്. അതിൽ ചിലതു മാത്രമാണ് ഇവിടെ ഈ വീഡിയോയിലൂടെ നിങ്ങളിലേക്ക് എത്തിക്കുന്നത്.
മാലിക്സ് ഓൺ എയർ (മാലിക്സ് കാറ്റർ ചാനൽ) സാങ്കേതികവിദ്യ, കൃഷി, എഞ്ചിനീയറിംഗ്, യാത്ര, ഭക്ഷണം തയ്യാറാക്കൽ, കല എന്നിവയെ ഉദ്ദേശിച്ചുള്ള ചാനൽ ആണ്
നിങ്ങൾക്കിടയിൽ വിവരങ്ങൾ കൈമാറാൻ ശ്രമിക്കുക.
#BlastingandPainting#MEKTeast#SaltTest

[@leslieallan392]

Suggest the use of gloves while performing all test to eliminate the possibilities of contamination from the skin....ie oils,sweat etc.

[@rolangibson7054]

Ha. ha .. you checked the anchor profile of the blasting without gloves and your hands are in direct contact with the blasted sample.

[@av.aboobacker354]

It is preferable to test salt level, then dust level and then anchor profile to avoid any inaccurate readings or avoid direct contact on test surface except test equipment. The video is very good and sharing the knowledge to others. Welldone 👍

[@georgemcintyre3674]

Shouldnt be handling blasted sufaces with bare hands as this will contaminate the blast

[@sibusisogule2198]

When you inspecting a blasted surface or vessel with visual inspection before taking salt test which critical points you should check for

[@arunrajendran8269]

BEFORE START WORK WE NEED TO DO BLOTTER PATER TEST.

[@shahinneyyathoor]

Good informative
Waiting for more technical vedios

[@satyanayak8818]

Nice video to learning inspection. How much ml distilled water use during salt test?

[@mysworld4893]

1.5 ml

[@harikrishnakumar5181]

Pls mention the dust tape number of rubing and sequence of rubing method

[@hasansetiyawan7131]

Its very good for me, auto subscribe . Kindly Please keep always share the others gouge .

[@MalixOnAir]

Sure

[@nvscreation6906]

Thanks useful information

[@heavenlyworship2018]

well done , that is what i needed, make me learn more knowlege

[@Indian68228]

Painting ka coverage kaise nikal te hai btaiye plz

[@yazhiniyazhini5782]

Wht is the meaning of SEM? Sir ✍️

[@rajeshqcrajesh1816]

Good Job....

[@SarojKumar-qv1pt]

Very very nice 👍 thanks

[@simplexination9837]

music is awsome bro...

[@MalixOnAir]

Thanks

[@mustafaozbal5505]

Thank you.

[@MalixOnAir]

You are most welcome

[@pambudibaguswidodo9768]

thank you, nice video

[@yosefmaar2433]

Great..👍

[@sconstruction7649]

Blasting machine Kaha milega

[@baynguyen9359]

Some segments in the video are stamped not adjacent to each other

[@guruprasaddongre6319]

Sir, हम साल्ट कंटैमिनेशन टेस्ट q करते है

[@meconlimited3896]

Have a look at Defelsko positector 6000 with the different probes and 1 gauge body

[@amalababu91]

Excellent 👍✨

[@smashhitz6653]

very good

[@roohulaminroohulamin4086]

Good Job

[@MalixOnAir]

Thanks

[@wiwitajipamungkas5274]

How to read testex replica tape?

[@prakashano4749]

Good..
Give attention to avoid the contact of bare hand to blasted surface...

[@MalixOnAir]

Ok, sir

[@buzigoogle9757]

Please use gloves when you touch a blasted surface❤

[@looterengine9778]

Good knowledge... Waiting for your new videos

[@Abdulbasit-bq4hi]

Why we are deducting 50microns from actual reading..... please rply fast

[@MalixOnAir]

Thickness of replica

[@ShahzadAhmed-ob7qc]

Very very nice video

[@MalixOnAir]

Thanks

[@ajm3827]

Why deducting 50microns?

[@MalixOnAir]

Thickness of paper

[@marcinlisiak700]

I'm blasting at least two years. But I'm sending this first time in my life. What for is this test? It's surface test to check good abrasive use to blasting? Or test to check blasting operator? Thanks for answer.
P.s Sorry my English

[@MalixOnAir]

Dear Marcin
1st test for dust remaining in surface (tape test) if any dust, there are chance of adhesion failure and corrosion under paint filim.
2nd test for profile.
3rd test is salt contamination test (for checking any salt)
These test not for blaster
Please subscribe my channel

[@marcinlisiak700]

@@MalixOnAir Many thanks for answer

[@pa3160]

@@monco123 you seems to be too much experienced in this field.

[@Luxiic]

Nice

[@arunrajendran8269]

SIR NO BLOTTER TEST IN THIS VIDEO.

[@mdrezaulkarimrezaul2255]

I want to take sandblasting and spray painting courses.
If anyone help me.

[@akashroy9422]

My favorite job sand Blasting i love you sand Blasting ❤❤

[@ssaihtc8922]

Thanks for sharing 🙂🙂🙂

[@mastankhadim.2091]

Can i get Bgas level 2 Notes for QC Inspector?

[@MalixOnAir]

yes

[@mastankhadim.2091]

Can you provide?

[@ajay_constantine]

This video alone actually covered 50% of BGAS GR 2!!

[@technologyatease1642]

great informative videos I am subscribing you

[@reynoldpanggabean209]

Why from the first you don't used hand glove

[@bipinmaharana5301]

Stop bkground music.

[@MalixOnAir]

I wil

[@nhungghamm4758]

Some segments in the video are stamped not adjacent to each other

[@vijaicm9478]

Nice