Thank you very much, this worked for me because like an idiot I set up this password 4 years ago and thought the drive might work in a new build without any issues. Context - I had an old laptop 2.5inch SSHD that had a master access password set (guess who did it?). It had Ubuntu and Windows 10 dual booted...I reset the bios passwords in the old laptop and wiped clean the hard drive with the help of linux live cd to NTFS. Voila ! everything worked in new PC.
how did u enter bios with the broken hdd ? when i tried to enter bios after putting my hdd i cant run bios but it keeps showing hdd error and no option for bios setting ..can u pls help me with this plss
so, I got a RMA replacement HDD from WD and I'm getting this I/O error when I try to initialize it. I haven't checked the disk in the BIOS but I can't imagine it would have a password on it when it came as a replacement drive from WD. I'll give it a try though and I tell you what if it works then you are the absolute GOAT because I haven't been able to figure anything out yet, I'm ready to RMA this RMA replacement HDD.
@@CanalDeRUclips0 kind of, meaning I didn't fix it I had to RMA the replacement drive. If your drive is showing this error there is nothing you can do about it, the drive is dead. The good news is Western Digital did accept the RMA and actually sent me a brand new drive as a replacement.
Sometimes it happens that the relationship of the disk motor with the circuit board attached to the hard disk becomes lighter. I mean you open that circuit and see if there's any dirt. This is the solution. Please try again. Thanks
I am also facing the issue "The request could not be performed because on an I/O device error" on my WD Elements External HDD. I can't use the drive as the SATA drive in the PC or Laptop it is showing as "Unknown" and "Not initialized" in Manage and not showing on my computer at all.
Brother i had an external hard disk it was working fine then suddenly windows started to lag so i disconnected and then when i connected again it was'nt visible and while initialising it was showing i/o error plz help
What I mean here is that if you keep your hard disk with a password. Then you will have such problems. And in case of solution, you will need that password.
I have the same problem here. But my pc restarted automatically while my new external hard disk was connected. when i opened the pc again, the disk is not visible anymore and it says "i/o error". Do you know any solution for this?
Bro thanks but i need to ask a question..mere pas haier laptop hy us ma hdd lagi hy..i was converting it into gpt or sb luch ho gia..abi sam eissue de rha hy...kia kro plz?? Dosra mere pas kuch hy nhe ??
HI Sekander Ali, I have the same problem but the only difference is - on initialilzing, it is showing DATA ERROR (CYCLIC REDUNDANCY CHECK)....can u help?
Samw problem bro,but i dont know a password i buy second hdd,i try make external hdd,first try is normal so i try using hdd regenerator for fix a bad sector after finish still normal i can send some video and play it from this hdd external after i try format,a error message like that appear data error cyclic redurancy check and problem same like your video,i cant diskpart,chkdsk or other,i using mini tool partiti*n,recuv*,hddsca* and other recovery data from dlcbo*t,all recovery software appear error I / O so what i must to do ?
hello ! This error is given in many cases, but according to you, it is understood that the PCB board of your hard disk is giving low voltage to the disk motor. You can try changing the PCB board on your hard disk. Thanks
Bruh..my hdd was in an enclosure but after i put a disk lock it wont work again...is the problem arise due to disk lock.the disklock is from the enclosure
The only application that actually helped. To say the least, I was indeed surprised to see my bricked HDD back alive. Especially, after a ton of different things already done without any result, including allegedly same wiping operation with the help of other apps.. THANKS a million to the author of the video and the Ontrack apps developers
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Sekander Ali when I plug in the hdd it’s accepting the hdd in the right corner green tick but it doesn’t show up on this pc and it’s unallocated ( not intialized ) when I initialize it it says the crc error same as you
@@SekanderAli my external HDD just doesn't initialise, I just get error data error (cyclic redundancy check) and can't view it. This happened after transferring files and getting disconnected at the same time.
Hello and welcome, i Think you need to repartition with XP installation disk. Let me know about your problem with a video clips and send to me via email. I will try a video for you. Thanks
What I mean here is that if you keep your hard disk with a password. Then you will have such problems. And in case of solution, you will need that password.
bor i have HP laptop It not showing me that my device is lock in boot menu but when i try to reset my laptop It show me where windows install this drive is lock.unlock the drive try again please help me I have lot of problem in my laptop. preparing automatic repire problem 😞
have you tried running rufus on it but try installing the command prompt on it? if you cant install it ,try running cmd from an outside ext drive or vice versa on the drive.. use drvpart.
You might be trying to access the hard drive through front port of usb try to plug it into montherboard usb ports It worked for me i was having the same problem
@@darshilpatel4322 How to fix bro..I have an external HDD and it is saying intialize MBR or GTU something like that..But when I click on MBR it says the I O device error
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
I also had the same problem after the recovery crashed suddenly, now it's in the same condition as the video. I do not have a password for my leech ... Can you fix it for me? thank you very much
Hello Hưng Nguyễn Hoàng, This problem is not only caused by the password, but the solution I have shown in this video is that if someone has a password on his computer hard disk, this same error will show. I think there is another problem with your hard disk. Can you elaborate on your main problem, then I would try to see if I have a solution. Thank you
there may b MBR to GPT / GPT to MBR conversion if you can erase your drive data then try to convert your drive into GPT/MBR might b this fix your problem. Thanks
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
what actually happened later that day i hooked the drive to another laptop via USB and an external power source ..When i turned the laptop on and checked the drive thru windows explorerer it showed up as e drive and I formatted it in xfat . then i reformatted in ntfs .Then i downloaded a windows insider Os .A week later after getting tired of the Windows updater not working right and running on restricted windows 10 over the product key issues ...I installed Chrome OS and haven't haad a damn bit of problems since. My theory to that problem was the RAW files were not being recognized by the windows 10 os and therefore in the add remove programs page The Linux and legacy boxes were not checked ..so that may have been the whole problem on my end.
You may encounter this problem when you change Windows. Because the program files of the previous Windows may not be supported in the new Windows. That's probably what happened. I think so.
I have a bare bones basic bios On my Compaq cq60 I had windows 7 32 bit running It was a 250 gig hard disk with 2 partitions Since it was a fresh install my c drive was full so I decided to use easeus recovery to extend the partition It was going well and after shrinking my second partition to extend my c drive it Showed the usual progress bar Then it rebooted a few times and showed no os installed I thought it probably bricked my os so o decided to get my win7 installer again and it got stuck in the windows logo Then I had a win10 1709 usb which didn't get stuck in the logo and showed the entire drive as unallocated And it wouldn't let me format or fox teh hard drive bcs it kept giving me I/0 error redundancy cyclic something I got a live Linux OS running on a usb and Linux helped me recover some of my data But Linux couldn't format the drive So I decided to use the hard disk test from the bios and that failed immediately Any help would be appreciated (I'm currently running Linux on a 32 gig memory card and it is extremely slow I was hoping if I can get some help)
Hello Samson Santhosh, The incident is tragic, I will try to give you a solution anyway. You try to separate the hard disk from the laptop and if possible enable that hard disk as a secondary hard disk in another desktop computer then copy the necessary data of your hard disk first with Windows XP. Then you will partition your hard disk anew, but you will have to go a different way to partition. The different approach is this - You need to take a Windows XP disk and take out the primary hard drive of that desktop and keep your hard drive as the primary hard disk then start installing Windows XP and once it starts you will be able to go to the partition area then from there you will be able to partition your hard drive again Can be used. If you have trouble understanding, I have given the link of 1 videos here and if you watch these videos, maybe you can few guess the work. ruclips.net/video/HNXbDVqhQ7E/видео.html Thank You
@@SekanderAli but thank you I will try this after I get another harddrive or ssd in the future along with a convertor if possible since I don't have access to another computer (this thing is the original one that it came with and has over 2 and a half years of use on it and it's at 30 percent health)
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Sometimes it happens that the relationship of the disk motor with the circuit board attached to the hard disk becomes lighter. I mean you open that circuit and see if there's any dirt. This is the solution. Please try again. Thanks
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Hey, cool video... I tried this approach.. But wiping is taking 3-4 days for my 1tb HDD... I can never complete it. I tried partition recovery and other stuff.. Did not work out.. How long does it take to wipe the hdd
Please tell me your email i have 1TB laptop new hard drive and have some problems with it i can't tell you here in details if you can share your mail i will properly able to tell you with screenshots
This problem is not only caused by the password, but the solution I have shown in this video is that if someone has a password on his computer hard disk, this same error will show. Thank you (email: sekanderali@gmail.com)
This problem is not only caused by the password, but the solution I have shown in this video is that if someone has a password on his computer hard disk, this same error will show. Can you elaborate on your main problem, then I would try to see if I have a solution. Thank you
@@muhammadrafaqat2705 sir, I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
For a second there I thought you were going to flip out and start throwing eggs at it.
morty forgot how to basic existed for a second and got confused
1st is OK
that’s not howtobasic
😂😂😂
how to deal with fatal error when i initialize the disk?
This is what I'm searching for. Thank you
Thanks
In Toshiba bios there is no Built in option for HDD/SDD, what is the solution?
let me check
Thank you very much, this worked for me because like an idiot I set up this password 4 years ago and thought the drive might work in a new build without any issues. Context - I had an old laptop 2.5inch SSHD that had a master access password set (guess who did it?). It had Ubuntu and Windows 10 dual booted...I reset the bios passwords in the old laptop and wiped clean the hard drive with the help of linux live cd to NTFS. Voila ! everything worked in new PC.
Welcome brother
can u tell how did you do it ??
i am stuck with a similar situation
pls help
how did u enter bios with the broken hdd ? when i tried to enter bios after putting my hdd i cant run bios but it keeps showing hdd error and no option for bios setting ..can u pls help me with this plss
Wait if i able to do the same way
Plss send the link of the ontrack I keep downloading the wrong file pls sir I need to fix my drive for my thesis
so, I got a RMA replacement HDD from WD and I'm getting this I/O error when I try to initialize it. I haven't checked the disk in the BIOS but I can't imagine it would have a password on it when it came as a replacement drive from WD. I'll give it a try though and I tell you what if it works then you are the absolute GOAT because I haven't been able to figure anything out yet, I'm ready to RMA this RMA replacement HDD.
Did you fix it?
@@CanalDeRUclips0 kind of, meaning I didn't fix it I had to RMA the replacement drive. If your drive is showing this error there is nothing you can do about it, the drive is dead. The good news is Western Digital did accept the RMA and actually sent me a brand new drive as a replacement.
oh.. I understand, thank you anyway.
Mere Ye Masla USB DRIVE me Ha
Kyaa W0 Bhi Aissy Thek H0 Sakti Ha.?
which version of ontrack it is please tell
U can use latest version
Regarding external hdd, uninitialised disk with crc error suddenly...what to do???
Wait, i will ans ur comment
Sometimes it happens that the relationship of the disk motor with the circuit board attached to the hard disk becomes lighter. I mean you open that circuit and see if there's any dirt. This is the solution. Please try again. Thanks
@@SekanderAli Ok... I will try...Thanks for reply...
how to fix it bro? i have buy new brand ssd, and first time i initialized its show error I/O. please help
Bro, give me time, dont worry, i will make a video for this type of problem.
@@SekanderAli where the video bro? please help me, i try the ssd in another pc and still cant initialized because I/O device error
@@SekanderAli can u give me ur whatsapp number or telegram?
@@SekanderAli please help me, i cant sleep 2 day just because this problem :(
Bro, i m not in my home. After Tomorrow i will go to my house and then i will try to make a video for this REASON. Pls consider. Thanks
Hello there !
Whenever I try to clean up partition on my HDD, I get this error "I/O device error". Please help me to fix this issur.
Ok, i will try
Any solution ??
I can't see wipe disk in my On track easyrecovery professional.
Can you share yours to me?please
Ok
Drive letter doesn’t appear?
Check data cable and power section.
diskpart has encountered an error the parameter is incorrect see the system event log solution ?
The problem in IO/ IC impossible to solve it by any program because the problem is hardware not software
you have to watch one more time.
I too think so, that error could be due to various issues. I have changed cables and Sata setups nothing worked so far!
Seems like HDD internals issue
i can't find that security menu on my bios, so sad for me
I am also facing the issue "The request could not be performed because on an I/O device error" on my WD Elements External HDD. I can't use the drive as the SATA drive in the PC or Laptop it is showing as "Unknown" and "Not initialized" in Manage and not showing on my computer at all.
Got it ?
@@SekanderAli are you asking something?
@@SHANKYJ06 whats the solution
ditto same here, 12 year OLD elements HDD 2Tb, never had any errors. Now in same state
were you able to solve this Shashank?
i have same problem and i can't find program with siral to use it
Brother i had an external hard disk it was working fine then suddenly windows started to lag so i disconnected and then when i connected again it was'nt visible and while initialising it was showing i/o error plz help
What I mean here is that if you keep your hard disk with a password. Then you will have such problems. And in case of solution, you will need that password.
I have the same problem here. But my pc restarted automatically while my new external hard disk was connected. when i opened the pc again, the disk is not visible anymore and it says "i/o error". Do you know any solution for this?
@@patriciatenorio7257 did you ever figure it out?
Is the 2nd way actually working cause you didn't showed it completely. I'm confused what to do next?
Next have to be recover your data from HARD disk with any recovery Soft.
Bro thanks but i need to ask a question..mere pas haier laptop hy us ma hdd lagi hy..i was converting it into gpt or sb luch ho gia..abi sam eissue de rha hy...kia kro plz?? Dosra mere pas kuch hy nhe ??
I think you can restore the previous partitions with the help of Partition Recovery software.
HI Sekander Ali, I have the same problem but the only difference is - on initialilzing, it is showing DATA ERROR (CYCLIC REDUNDANCY CHECK)....can u help?
Let me know full error text. Thanks
Same problem
Which software
on trak bro
@@SekanderAli thank bro
Samw problem bro,but i dont know a password i buy second hdd,i try make external hdd,first try is normal so i try using hdd regenerator for fix a bad sector after finish still normal i can send some video and play it from this hdd external after i try format,a error message like that appear data error cyclic redurancy check and problem same like your video,i cant diskpart,chkdsk or other,i using mini tool partiti*n,recuv*,hddsca* and other recovery data from dlcbo*t,all recovery software appear error I / O so what i must to do ?
hello ! This error is given in many cases, but according to you, it is understood that the PCB board of your hard disk is giving low voltage to the disk motor. You can try changing the PCB board on your hard disk. Thanks
Hi sir my internal 2tb harddisk same problem i/o error how to solve
tel me more about the problem
@@SekanderAli hard disk detected but all drive unalocated
Bruh..my hdd was in an enclosure but after i put a disk lock it wont work again...is the problem arise due to disk lock.the disklock is from the enclosure
Not got it bro
The only application that actually helped. To say the least, I was indeed surprised to see my bricked HDD back alive.
Especially, after a ton of different things already done without any result, including allegedly same wiping operation with the help of other apps..
THANKS a million to the author of the video and the Ontrack apps developers
What is the procedure for external hard drive...I have the same problem with external hard disk
Yeah Same ,How to fix that
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Sekander Ali bro I have same problem with external hdd can you please fix it for me ?
What showed when you plugs hdd to desktops/Laptops? Let me know the warning/error pls
Sekander Ali when I plug in the hdd it’s accepting the hdd in the right corner green tick but it doesn’t show up on this pc and it’s unallocated ( not intialized ) when I initialize it it says the crc error same as you
If BIOS nothing "Built-in HDD Status", how sir?
Wait.. I check it for you.
i dont have same motherboard .... what can i do need help please
Dose it work for u
Bro same yehi problem External m dikhara please help me bro
tell me more
i have external hard disk
how it will i dont know
Ok i will come back to you
@@SekanderAli my external HDD just doesn't initialise, I just get error data error (cyclic redundancy check) and can't view it. This happened after transferring files and getting disconnected at the same time.
@@mybuyinginsights same is here...I did every possible solution using low level format but got disconnected automatically...
I bought a New hdd(it is my second hard drive,my other hard drive is working fine)but when i want to initialize my hdd,it says io error pls help
me too
Hello and welcome, i Think you need to repartition with XP installation disk. Let me know about your problem with a video clips and send to me via email. I will try a video for you. Thanks
@Emir Halit mines alrite after a few tries of plugging and unplugging the harddrive
i want to solve it
bro any chance you already solve the unallocated disk with cyclic disk redundancy error ?
What I mean here is that if you keep your hard disk with a password. Then you will have such problems. And in case of solution, you will need that password.
bor i have HP laptop It not showing me that my device is lock in boot menu but when i try to reset my laptop It show me where windows install this drive is lock.unlock the drive try again please help me I have lot of problem in my laptop. preparing automatic repire problem 😞
I have shown here how to unlock a hard drive, did you watch the video carefully?
I tried rebuild mbr with aomei and it worked well for me
really? thanks
CDC,bad sector,is my hardisk dead?
I got this issue
I can't install Windows
File not copying.
I/o error
have you tried running rufus on it but try installing the command prompt on it?
if you cant install it ,try running cmd from an outside ext drive or vice versa on the drive..
use drvpart.
RANDALL MARSH full method i check
Then i test with ubantu disk blenching
Then 2 issue got
Harddisk spinging slow
processes
Sekander Ali tryed
Because of disk sping speed issue
same bro but password forget . how remove password?
Ok , i am trying to give you a solution.
@@SekanderAli ok bro
I haven't password too😭
good advertising, but DOES NOT WORK for me (simply nothing is found after counting all the clusters)
Pls tell me what happened
@@SekanderAli "10 months ago" ... I really do not remember any more lol
But for sure I can say that the tutorial does not work / did not work for me
How to to fix i/o error if the disk is unallocated?
You might be trying to access the hard drive through front port of usb try to plug it into montherboard usb ports
It worked for me i was having the same problem
@@darshilpatel4322 its an ssd on my laptop bro
@@ochieev3165 never mind i found a solution for my hdd just an hour ago.
@@darshilpatel4322 How to fix bro..I have an external HDD and it is saying intialize MBR or GTU something like that..But when I click on MBR it says the I O device error
Sorry to Late, i will make a video for this reason on next week.
I forget password. How I recovery it
what password?
Bhai sd card mai cyclic redundancy check in creating new simple volume a new method
Make a vedio on this
bro, give me a week
Ol
Ok
Windows 10 me kaise karna honga sir
Sowed
Thanks got my hard drive working again
zombies zombie how u did it? Mine 1 problem like this
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
for acer laptop user .install and open acer quick access - acer signature Features -click gear -uncheck switchlock
Thanks
Could you explain more
I think Aomei partition works well for me.
You're welcome!
Help me please... I have same problem
ok
too complex for a girl
girl you can try aomei partition
It would have been nice to have dialog and explain what and why you are doubt what you did. Sometimes it is hard to see your screen! TALK!
cannt get it
Why bro?
How to save data first...
How do you recover data?
by Recover software
Bro itong hard drive natunog binuksan ko tpos ung pin inalis ko sa plate nya...yaw pa rin makita data... Anu solusyin bro? Tnx
Palitin na
@@MonicaYap tama ka
bhai meri 3tb hard drive 128 gb bata raha aur error aa raha
How i can help to you sir
@@SekanderAli detect nahi ho rahi
PLEASE SHARE SOFTWARE LINK
I also had the same problem after the recovery crashed suddenly, now it's in the same condition as the video. I do not have a password for my leech ...
Can you fix it for me?
thank you very much
Hello Hưng Nguyễn Hoàng, This problem is not only caused by the password, but the solution I have shown in this video is that if someone has a password on his computer hard disk, this same error will show. I think there is another problem with your hard disk. Can you elaborate on your main problem, then I would try to see if I have a solution. Thank you
Agar aisi hard disc mein agar hamara important data Ho to ham Bina kisi format ke use data ko kaise wapas la sakte hain aur Bina kisi pareshan ok
would you pls tell me with english? thanks
Thank you very much, It was very helpful
You are welcome!
my ssd has a problem like that and it is fckin new it takes only 2 weeks and got a problem like that
there may b MBR to GPT / GPT to MBR conversion if you can erase your drive data then try to convert your drive into GPT/MBR might b this fix your problem. Thanks
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
mere mein same problem bios mein aap nejo option unlock kiya vo mere mein nahi h kuch or batao
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
this happend in my ssd but i dont even put a password
Which company?
Kingston bro
It was new and got broken a week after didnt have a chance to use it
Can you tell me that its circuit is broken? Or something else. I would make a video if I got an idea.
@@SekanderAlicyclic redundancy error
i dont know mine eithr im fixing tochunkit
what actually happened later that day i hooked the drive to another laptop via USB and an external power source ..When i turned the laptop on and checked the drive thru windows explorerer it showed up as e drive and I formatted it in xfat . then i reformatted in ntfs .Then i downloaded a windows insider Os .A week later after getting tired of the Windows updater not working right and running on restricted windows 10 over the product key issues ...I installed Chrome OS and haven't haad a damn bit of problems since. My theory to that problem was the RAW files were not being recognized by the windows 10 os and therefore in the add remove programs page The Linux and legacy boxes were not checked ..so that may have been the whole problem on my end.
You may encounter this problem when you change Windows. Because the program files of the previous Windows may not be supported in the new Windows. That's probably what happened. I think so.
No value is there for my hard-disk
Any video for that
May be another options
I have a bare bones basic bios
On my Compaq cq60
I had windows 7 32 bit running
It was a 250 gig hard disk with 2 partitions
Since it was a fresh install my c drive was full so I decided to use easeus recovery to extend the partition
It was going well and after shrinking my second partition to extend my c drive it
Showed the usual progress bar
Then it rebooted a few times and showed no os installed I thought it probably bricked my os so o decided to get my win7 installer again and it got stuck in the windows logo
Then I had a win10 1709 usb which didn't get stuck in the logo and showed the entire drive as unallocated
And it wouldn't let me format or fox teh hard drive bcs it kept giving me I/0 error redundancy cyclic something
I got a live Linux OS running on a usb and Linux helped me recover some of my data
But Linux couldn't format the drive
So I decided to use the hard disk test from the bios and that failed immediately
Any help would be appreciated
(I'm currently running Linux on a 32 gig memory card and it is extremely slow I was hoping if I can get some help)
Hello Samson Santhosh, The incident is tragic, I will try to give you a solution anyway. You try to separate the hard disk from the laptop and if possible enable that hard disk as a secondary hard disk in another desktop computer then copy the necessary data of your hard disk first with Windows XP. Then you will partition your hard disk anew, but you will have to go a different way to partition. The different approach is this - You need to take a Windows XP disk and take out the primary hard drive of that desktop and keep your hard drive as the primary hard disk then start installing Windows XP and once it starts you will be able to go to the partition area then from there you will be able to partition your hard drive again Can be used.
If you have trouble understanding, I have given the link of 1 videos here and if you watch these videos, maybe you can few guess the work. ruclips.net/video/HNXbDVqhQ7E/видео.html Thank You
@@SekanderAli the problem is it won't format it gives disk I/o error in Linux and windows diskpart in cmd
@@SekanderAli but thank you I will try this after I get another harddrive or ssd in the future along with a convertor if possible since I don't have access to another computer (this thing is the original one that it came with and has over 2 and a half years of use on it and it's at 30 percent health)
just got a 120gig SanDisk ssd (pricey as hell and it's also dramless)
please send me a mega link to the exact software version bro. please...
what links
Bhai me video grafer jo mera deta he hrd k andr or same yehi masla a rha he
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Guys it's version 10.0.2.3
Then ?
seems like a promotion video only!
BIOS options are not same for Acer and HP and other OEMs. Doesn't work for a lot of people!
Scam!
put i have same error but my hard disk without password
What error? SSD or IDE
I have 1TB hard drive I wipe that but It takes more hours.
then
bro please help me through team viewer i can't do this alone, plz help me to initialize me hard drive
i'll help
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
@@SekanderAli i have changed my hard disk and i lost my all data too.. please communicate me to facebook.com/mark2vikas please message me.
@@vikassinghrajput9508 okay bro. i will there
I set no password and disk was working fine suddenly that happened !
Maybe board problem
@@SekanderAli i have 2 other disks working fine i changed ports still the same..
Sometimes it happens that the relationship of the disk motor with the circuit board attached to the hard disk becomes lighter. I mean you open that circuit and see if there's any dirt. This is the solution. Please try again. Thanks
@@SekanderAli its beand new never used.. in its case i used it for 1 week and then that happened
Plasea send me a link
Which one bro
thank you vey much november 5, 2020 Philippines
Welcome bro
I'll email you a video of my situation. Can you help?
Ok, let me check
doenst work
I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Hey, cool video... I tried this approach.. But wiping is taking 3-4 days for my 1tb HDD... I can never complete it.
I tried partition recovery and other stuff.. Did not work out..
How long does it take to wipe the hdd
Let me check
Please tell me your email i have 1TB laptop new hard drive and have some problems with it i can't tell you here in details if you can share your mail i will properly able to tell you with screenshots
This problem is not only caused by the password, but the solution I have shown in this video is that if someone has a password on his computer hard disk, this same error will show. Thank you (email: sekanderali@gmail.com)
sir password kya ha ??
What you see in my video may not be what you think it is. I gave 0000 here
thank you very much...please share link ontrack easyrecovery v.11.0.1.0
Thankkksss u so muchhh broo 😘😘😘, im forget if i lock the Hard Disk, so i cant initialized
Welcome brooooo
data error (cyclic redundancy chech)
I am going to give a video of this problem.
aap jo bhi process kar rahe ho wo verbally batayiye
acccha
Good Day sir i emailed you my problem hoping for solutions
Ok my dear, i will check
Is it SSD or HDD?
@@SekanderAli its hdd
I fixed with Aomei partition without data loss
How did you do that?
How did you do that
dont spam, doesnt work for me
Sir same problem ahe tumcha phon number dya
sorry
koi solved nhi to erecover kar rahe ho itna der se bewkuf bna rhe the solve karke dikhane ke bazaay recover oh no
This problem is not only caused by the password, but the solution I have shown in this video is that if someone has a password on his computer hard disk, this same error will show. Can you elaborate on your main problem, then I would try to see if I have a solution. Thank you
plz helf sir
how can i help you , pls tell me
thank you bro so much
Welcome bro
Hai sir good morning
morning
Bhai plz help me
What help bro?
@@SekanderAli bro ek saaal pehle help kak kaha tha ap aj poch rhe he😭😭😭😭😭🥶🥶😡😡
@@muhammadrafaqat2705 sir, I'm sorry I had no idea about this comment. I didn't understand RUclips. When I started to understand today, I am really sorry to see your comment. Did you solve the problem?
Thanks!
Welcome
thankss.. tgina na set ko nga pala sa pass to buti alam ko pa- philippines
2 TB hardisk error anee solutions bro👆
Ok i will come back for you
Ye jo jyan de rahe ho jahar ke barabar hai
یعنی فقط با وصل کردن به کیس مشکلش حل شد😂😂😂
Thanks bro
Welcome