One more tip: if you slide the jaws and plastic washers off the auger and directly onto a slim screwdriver they will slide right back on in the right order.
My auger broke. I found the part on Amazon and ordered it. I was lucky to find this wonderful video! I followed this step by step and was able to install my new auger and it works! Thanks Repair Clinic!
Thank you so much. My husband has been an Master Electrician for 35 years and he could never have put this together without you video. You saved the day. Thanks again from his loving wife.
This was a perfect step-by-step guide for the replacing of an auger! Not only did you save me some money - but I got some kudos from my wife for doing it!! Thank you so much!
Repair Clinic videos are definitely the best place to go when fixing any appliances. I'm 56 yr woman and they have saved me so much $ doing repairs myself. Just order parts, watch and voila, fixed. They guided me thru dishwasher heat element and ice auger in GE Fridge. Thank you so much for showing us how. You definitely saved me hundreds and these days, that's huge. 👍🏼
Thank you so much for this video. I replaced the Auger and Auger plate as both were cracked also had to remove and lube the Auger drive with food grade grease as the auger drive was frozen solid. I'm very grateful you saved me a lot of money. As the tech wanted $125.00 just to come to my house + labor and repair. I did it my self for for $38.02. They would probably charged me 250.00.
Thank you for posting this video. Even though my parts were not exactly the same as those in the video, the instructions were thorough enough that I was able to replace my broken ice maker auger with your help. You saved me a repair bill.
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
Wow, what a fantastic tutorial! About halfway into taking apart our ice bucket to replace the auger, I didn't think I'd ever be able to put it back together. Then I found this video which presents the steps in an extremely easy to follow manner. I did a lot of pausing and rewinding. Thank you so much!
Thank You! Very clear and thorough step by step instructions. I was able to change the broken auger and broken protection plate with your video. Thanks! My wife is mad at you though because she wanted a new fridge. 😂
Top notch. Showed clearly the blade assembly onto the shaft, which was nice for determining order and orientation of the plastic washers. I would have had mine done in under a half hour had the metal shaft on my non-GE replacement auger been machined properly (had to use a rotary tool to extend the flats farther down the shaft).
Just finished. Your video made everything a snap. One thing I would add is to be VERY aware of how the cogs and washers come off the auger shaft. The washers are not all the same.
EXACTLY what I needed...! I started it out by myself, but then ran into the problem of not knowing how to separate the auger assembly from the main housing - I was afraid of prying too hard or in the wrong place - This video was SO clear and concise. GREAT job..!
Excellent video wow just saved me a service call and about 130 bucks...Each step is clear and easy to follow. Again thanks and i will give this thumbs up.
Magnifico. The mechanic was charging me $85, I bought the part $17 and this video did the rest.... with my help of course...lol I I held the screwdriver.
Lifesaver of a video. Thank you! I have a 2006 model icemaker and was concernered the auger wouldn't be the same size, yet it was and then video was so very helpful. We have an ice dispenser again!
Super helpful! Needed to remove the blades from our auger (cause they work very poorly and break ice when you don't want them to), your video got me past the point of being stuck, thank you!
Thank you for this well done video. Your excellent close-ups let me see the order of the washers and blades. I was sure to order the correct part #, but the shaft end (flat area) was longer than the original, resulting in the 1st two washers to go back on being loose. But it worked fine that way - tried adding washers, but it bound up the auger.
Great instructional video. I would have never figured out the shaft nut was reverse threaded. Probably would have broke it trying to get it off. Thanks again.
excellent video! other than getting the E-ring off, it was a piece of cake, super easy to follow with perfect clear instructions! Thank you soooo much!!
I found a c-ring in the bottom of my cup one day. I would have delved into it soon anyway but if I knew exactly where it should be it would make things easier. There it is. It retains the auger in the housing. This sure helped. Thanks.
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
My unit had a washer under the actuator arm bracket. It’s purpose is to align the arm so it doesn’t bind when actuating the white flapper that controls whether ice is crushed. When I reassembled I had the washer on top of the bracket, should have been underneath, and when checked movement of the arm it was binding or catching on the flapper. Put the washer under and it works smoothly.
The grinding discs will go on either way, but notice how there is an offset pattern to them before you remove them and then again as you put them back on. Thx for the video.
Amazon auger I received is correct length and shaft length is the same. However, the first spacer distance is longer on the new one. This leaves a gap between the spacers and the first metal piece. Thought I had not put correct spacers on at first. Then in comparing shafts, saw the difference in length of round part of the two shafts. Adding a spacer won't work, because the flat area of shaft is too short for all the pieces to be assembled. Other than having the shaft milled down, I can't see an easy fix.
We only sell OEM parts. You may have purchased a non-oem part, which may be different from an OEM part. Double check on our website by entering in your model number: RepairClinic.com
some idiot who lived in the unit before me put a plastic baggie filled with herbs in the ice bucket, and it got all twisted up in the gears at the end of the corkscrew. it was easy to take apart and put together with the help of this video.
RepairClinic.com my only concern is that I seem to have put the metal peices angled wrong because I'm only getting crushed ice..so I'll take it apart again and see if a change in the angle fixed that problem
One more tip: if you slide the jaws and plastic washers off the auger and directly onto a slim screwdriver they will slide right back on in the right order.
I wish I had read this tip. Now I think I am missing one spacer. Is there a part number for the spacer?
Or rubber band them together, everything stays in place, except of course for the locking nut.
Screwdriver was perfect!!
Great tips, glad I read this. I just squeezed them a bit and transferred them from the old one directly to the new one.
My auger broke. I found the part on Amazon and ordered it. I was lucky to find this wonderful video! I followed this step by step and was able to install my new auger and it works! Thanks Repair Clinic!
Wonder which part broke mine doesn’t seem to be broken
First, I watched your video . Then, I went along with the video to do the repair. Took me 20 minutes. Thank you so much!
Thank you so much. My husband has been an Master Electrician for 35 years and he could never have put this together without you video. You saved the day. Thanks again from his loving wife.
This was a perfect step-by-step guide for the replacing of an auger! Not only did you save me some money - but I got some kudos from my wife for doing it!! Thank you so much!
Great thanks!
Repair Clinic videos are definitely the best place to go when fixing any appliances. I'm 56 yr woman and they have saved me so much $ doing repairs myself. Just order parts, watch and voila, fixed. They guided me thru dishwasher heat element and ice auger in GE Fridge. Thank you so much for showing us how. You definitely saved me hundreds and these days, that's huge. 👍🏼
Thank you so much for this video. I replaced the Auger and Auger plate as both were cracked also had to remove and lube the Auger drive with food grade grease as the auger drive was frozen solid. I'm very grateful you saved me a lot of money. As the tech wanted $125.00 just to come to my house + labor and repair. I did it my self for for $38.02. They would probably charged me 250.00.
Thank you for posting this video. Even though my parts were not exactly the same as those in the video, the instructions were thorough enough that I was able to replace my broken ice maker auger with your help. You saved me a repair bill.
Excellent tutorial!!! My wife kim and i were very impressed. Thank you so much, because with out her ice her life has been luke luke warm!!
This video is fantastic - a lifesaver. Very clear, accurate step-by-step instruction. Thank you!!!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thank you for taking me through step by step on how to fix my ice auger. I tipped you. I enjoy my ice very much. 😊
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thank you so much for this video. I fixed myself. I youtube stuff now thst my dad had passed. Its like he was here showing me how to fix it.
Wow, what a fantastic tutorial! About halfway into taking apart our ice bucket to replace the auger, I didn't think I'd ever be able to put it back together. Then I found this video which presents the steps in an extremely easy to follow manner. I did a lot of pausing and rewinding. Thank you so much!
Awesome video! Besides (like everyone else) needing to file down the metal bar to match the OEM part, this video walked me through it perfectly.
Thank You! Very clear and thorough step by step instructions. I was able to change the broken auger and broken protection plate with your video. Thanks! My wife is mad at you though because she wanted a new fridge. 😂
Top notch. Showed clearly the blade assembly onto the shaft, which was nice for determining order and orientation of the plastic washers. I would have had mine done in under a half hour had the metal shaft on my non-GE replacement auger been machined properly (had to use a rotary tool to extend the flats farther down the shaft).
Glad you wrote that. I'm about to do the same thing and wanted to verify it wasn't a terrible idea.
This awesome 😊
My I ordered my auger and I was able to replace it back 👌
Thank you for this amazing video.
Just finished. Your video made everything a snap. One thing I would add is to be VERY aware of how the cogs and washers come off the auger shaft. The washers are not all the same.
Great Video!!! Followed step-by-step. Done in 30 minutes! Perfect! I am now a subscriber.
EXACTLY what I needed...! I started it out by myself, but then ran into the problem of not knowing how to separate the auger assembly from the main housing - I was afraid of prying too hard or in the wrong place - This video was SO clear and concise. GREAT job..!
Excellent video wow just saved me a service call and about 130 bucks...Each step is clear and easy to follow. Again thanks and i will give this thumbs up.
I just used this video to replace my auger, and was pleased at how great the instructions were- I did it myself! 👌🏼👌🏼
Thank you. Step by step instructions great. The most valuable part of info is the direction to loosen the bearing is clockwise. Left hand threatening.
Thank you!
Thank you. I would have never figured that out without your video and the step-by-step was perfect.
Magnifico. The mechanic was charging me $85, I bought the part $17 and this video did the rest.... with my help of course...lol I I held the screwdriver.
Fantastic video!!! Easy to follow and saved me over $400.00 to replace.
THANK YOU for this video, I only had to pay 16.99 for an Auger vs 135 for the whole assembly! You rock good sir!
Thank gosh for this video! The auger would have been difficult for me to install without it. Thank you!
AMAZING. I LOVE REPAIR CLINIC!!!! YOU HAVE LITERALLY HUNDREDS OF DOLLARS!!!!! THANK YOU!!
Worked great! Thanks for the concise step by step video. Ice is flowing now!
Perfect video - started to replace on my own and hit a roadblock. This made it simple and quick.
Awesome! Best how to video ever. Clear and easy to follow step by step instructions. It couldn't have been easier! Thank you!
Lifesaver of a video. Thank you! I have a 2006 model icemaker and was concernered the auger wouldn't be the same size, yet it was and then video was so very helpful. We have an ice dispenser again!
Super helpful! Needed to remove the blades from our auger (cause they work very poorly and break ice when you don't want them to), your video got me past the point of being stuck, thank you!
Thank you. It saved me $80 so far! Mine had a piece of plastic causing a drag on the auger!
Well done. I finished the job without any extra parts. Always a good thing.
Thank you for this well done video. Your excellent close-ups let me see the order of the washers and blades. I was sure to order the correct part #, but the shaft end (flat area) was longer than the original, resulting in the 1st two washers to go back on being loose. But it worked fine that way - tried adding washers, but it bound up the auger.
We sell genuine OEM replacement parts that go to your model at RepairClinic.com.
Excellent tutorial! Thanks for saving me $150 to have them come and do it.
Great instructional video. I would have never figured out the shaft nut was reverse threaded. Probably would have broke it trying to get it off. Thanks again.
Thank You Folks!!! I was able to fix my ice maker by myself. A fantastic video, you couldn't have done it any better! Thanks again, You All Rock!
Excellent step by step instructions. Greatly appreciated!
This is a great video! I just finished changing it on mine, saved so much time after watching. Thanks and keep up the good work.
Thank you for posting this video. The steps are clear and easy to follow.
Super helpful. Wish I would have watched it before I started. Would have saved some re-work.
Great video, my install worked great thanks to this video. Well done.
Thanks for the video it was very helpful for some of the nuanced moments. Really Appreciate it!
Thank you for this wonderful video! We could replace our freezer broken part with this tutorial.
I did it! I did it! It works! I can't believe it! Thank you! ❤️❤️❤️❤️❤️
Perfecto. Great camera angles. This video earned me many many honeydo points... Thank you!!!
Great video with a thorough walk through and explanation. Thanks!
Perfect step by step instructions, thanks!
Excellent instructions - easy to follow - augur is functional again. Thank you!!
Thank you for this video! So helpful--I never would have been able to replace the auger without it :)
Fantastic!!! Very easy to follow and saved me a ton of money!!!!
excellent video! other than getting the E-ring off, it was a piece of cake, super easy to follow with perfect clear instructions! Thank you soooo much!!
Saved me a lot of frustration! Thank you so much
I found a c-ring in the bottom of my cup one day. I would have delved into it soon anyway but if I knew exactly where it should be it would make things easier. There it is. It retains the auger in the housing. This sure helped. Thanks.
I want to thank you 🙏 for this instruction video! It has helped me install my ice maker Auger!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
What a great post - I never could've done it without you! Thank you so much :)
Great video. The left hand auger nut is key! Just follow the video.
Great helpful video. That counter-clockwise screw had me thrown!
Worked out great. The pace of the video was helpful.
Well explained and demonstrated tutorial. Thank you for a job well done.
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thanks for a perfect guide. You made this easy to follow and I was done in less than 30 min.
Never could have done this without this version..👍🏾👍🏾👍🏾
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Excellent step by step, easy to follow!
Instructions were easy to follow. Thankyou
Thanks!
Thank you! I had no problem changing out my auger because of this video.
Very clear, concise and so helpful!! Thank you for your time and efforts...much appreciated!!
Excellent video! Saved alot of money doing this myself.....thanks!!!!
This was extremely helpful. Thank you so much!
Thank you!!! I just changed mine thanks to your help!!
Thank you! Replaced mine today with the help of your video
Great video. East step by step. Thanks.
My unit had a washer under the actuator arm bracket. It’s purpose is to align the arm so it doesn’t bind when actuating the white flapper that controls whether ice is crushed. When I reassembled I had the washer on top of the bracket, should have been underneath, and when checked movement of the arm it was binding or catching on the flapper. Put the washer under and it works smoothly.
Awesome video, easy to follow along. Thank you!
Will be using this to replace a broken auger on our fridge. Thanks for the vidoe!
A very helpful video indeed! Left hand auger nut was the trick.
Thanks!
The grinding discs will go on either way, but notice how there is an offset pattern to them before you remove them and then again as you put them back on. Thx for the video.
Amazon auger I received is correct length and shaft length is the same. However, the first spacer distance is longer on the new one. This leaves a gap between the spacers and the first metal piece. Thought I had not put correct spacers on at first. Then in comparing shafts, saw the difference in length of round part of the two shafts. Adding a spacer won't work, because the flat area of shaft is too short for all the pieces to be assembled. Other than having the shaft milled down, I can't see an easy fix.
We only sell OEM parts. You may have purchased a non-oem part, which may be different from an OEM part. Double check on our website by entering in your model number: RepairClinic.com
Thank you for making and posting this. It was very helpful.
Great demo! Thanks so much for posting this. It was so much faster than attempting to figure it out tomorrow on my own
Great video! Great instructions and awesome camera work! Thanks!
2022 and this video came in clutch... thank you. And subscribed
What a great job! Thank you so much! I was able to easily follow your step by step instructions - I'm so grateful for this!!!
Cool thanks!
This DIY video was very helpful. Thanks
some idiot who lived in the unit before me put a plastic baggie filled with herbs in the ice bucket, and it got all twisted up in the gears at the end of the corkscrew. it was easy to take apart and put together with the help of this video.
Awesome, can’t beat this tutorial
Thank you so much for this video! We were able to fix this in 5 minutes!
Perfectly described and awesome walk through. Thank you.
Thank you so much, it was so easy to follow along, very detailed. Awsome! 👍🏼
this video was very helpful, and providing a link to purchase made the task a breeze..thanks !!!
Awesome thanks for letting us know Crystal!
RepairClinic.com my only concern is that I seem to have put the metal peices angled wrong because I'm only getting crushed ice..so I'll take it apart again and see if a change in the angle fixed that problem
Thank you for the video is was very helpful in replacing my auger
i literally figured all t his out by myself last night after about 20 minutes because i'm the smartest man alive.
Thank you.You are a great teacher.
Thank you very much for the instructions. I appreciate it.
Nice Video. Very helpful. Thank You.
Thank you! This worked perfectly!
Absolutely perfect instructions. Thank you.
Thank you!