Это видео недоступно.
Сожалеем об этом.

runaway camper axel maintenance

Поделиться
HTML-код
  • Опубликовано: 30 июн 2017
  • In this video we will be re-torquing the axel nut and greasing the axel wheel bearings.
    #kevinrobinson #RunawayCamper #RunawayCamperProject
    Valvoline SynPower Synthetic Automotive Grease - 14.1oz (VV985) amzn.to/2p7xEuj
    Lincoln 1147 Grease Gun with Hose amzn.to/33TYdBY
    Craftsman 9-31425 20-150 ft lbs 1/2" Drive MicroTork Torque Wrench amzn.to/35YRTuP
    As an Amazon Associate, I earn a small commission from qualifying purchases.
    This will not, however, change the price of any product you purchase.
    This helps support the channel and allows me to continue to make videos.
    Thank you for the support!
    Keep it real & clean.
    Help Support My Channel paypal.me/kevi... Thank You.
    Fan Mail kevinrobinson6688 P.O.Box 123 Bobtown,PA 15315-0123

Комментарии • 26

  • @garydesantis6755
    @garydesantis6755 2 года назад +1

    As someone who is mechanically challenged, you have done an excellent job in explaining the process to greasing axles. You took the time to explain every step and show the how and why involved in each step-and which tools to use. It is people like you Kevin, who give confidence to those of us who are nervous about maintaining mechanical parts. And a big thanks for mentioning which replacement parts and grease brands are best for this camper. I look forward to more instructional videos from you. God bless you for your knowledge and patience. You are a good man.

  • @jebmckenzie1688
    @jebmckenzie1688 Год назад +1

    Great informational video. You brought up important topics that I expect to serve me and my new CoolCamp well. Thanx!

  • @jeremoe1
    @jeremoe1 7 лет назад +1

    Nice video. It was a reminder that it's time for me to grease my axle again - haven't done it since last summer. I always take a small hydraulic jack with me when I'm on the road. It's smaller than the one you used in the video. I want to get a bigger one to keep at the house.
    Happy Camping!

  • @PaulDGreen-bu4iz
    @PaulDGreen-bu4iz 7 лет назад +1

    Great instructional how-to video Kevin! Thank you for sharing!

  • @stevearndt1120
    @stevearndt1120 4 года назад

    Kevin, my wife and I will be getting a runaway trailer in the future and appreciate your tips.

  • @clermontcubby9207
    @clermontcubby9207 7 лет назад

    Several great tips. Thanks

  • @chadi7173
    @chadi7173 7 лет назад

    Thanks for putting that up. I enjoy how
    Informative your videos are.
    Think you should carry a spare and small tool set on future trips. You get
    Up in the mountains and there's no service
    And no cell signal. You'd have to unhook and run to town and pay double.

    • @Robinson-Homestead
      @Robinson-Homestead  7 лет назад

      I had some tools with me but not a lot they worked tools are a must you are right chad thanks.

  • @adoboy5520
    @adoboy5520 4 года назад

    When you remove the bearing seals I would like to see that video. Thanks for your tips I’m learning a lot from you. I’m picking up my trailer in 6 weeks.

  • @Shoshanim222
    @Shoshanim222 5 лет назад

    Thanks! 💕

  • @corneliusrobinson9745
    @corneliusrobinson9745 7 лет назад +1

    Great Video!!!

  • @jaya.0069
    @jaya.0069 7 лет назад

    More great camper maintenance tips. (are you for hire) Thanks Kevin!

    • @Robinson-Homestead
      @Robinson-Homestead  7 лет назад

      Thanks for watching you need help Jay A.

    • @jaya.0069
      @jaya.0069 7 лет назад

      Everythings ok, thanks for asking Kevin. Keep up the great tips, i have learned a lot from them.

  • @alexmark1982
    @alexmark1982 2 года назад

    Kevin, how do you remove covers from the hubs?

  • @albion2742
    @albion2742 6 лет назад +1

    Its called AXLE.

  • @Captleemo
    @Captleemo 7 лет назад

    You show jacking up your trailer but you don't show where you are placing the jack. You should show that and stress that you do not put the jack under the axle itself as you could damage it. Also I know they say not to use a pneumatic grease gun because you could blow out the seals. But I think that would only happen if you held the trigger on the grease gun until the grease started coming out of the grease cap. What I do is squeeze the trigger and can hear one pump cycle and then let go of the trigger. That way I'm not blowing to much grease in there at one time. I pull the trigger about as many times as you squeeze the handle on your grease gun. So far so good. www.etrailer.com/s.aspx?qry=Trailer+Wheels+Center+Caps. Etrailer has some nice center caps if you want to gussy up your wheels.

  • @unacamper6700
    @unacamper6700 6 лет назад

    The first thing to do, is take those junk Bearing Cups / Cones and throw them in the trash. Put in Timkens with a new seal, and Hi temp grade Lithium grease.................and lay off the French Fries.