Is there a way to change the color in the control panel? I'd like the control (odometer) panel to match the ambient lighting. I currently have it set up to orange, but when I change the ambient lights to blue, would like the odometer panel tp change to blue too. Any thoughts?
I look forward to seeing how to purple back. I had in it and then the software update from BMW eliminated all coding from 3070 to this 3076 RGB. I can’t figure out now how to get it back. I had purple and green
@Henry Jackson - seems to be that ambient lighting might be going bad. Have u also tried to make instrument cluster at bright and has that helped with ambient light?
@Arman Sokhakyan - you are not going to find purple, you will have to mix the ensemble layer R G B to get the purple tint. As in blue factory there is hint of green as well as it is selected by default...
Hello. I noticed that your iDrive system does not play media automatically on startup. For some reasons my media (Radio, CD) starts playing automatically when I start my car or switch on iDrive system. Do you have an idea of how to disable autoplay on startup, please?
Hi!!!! I have a BMW F15 (2015) but when I entry to my car the interior leds are low but if I touch the button central to my top this lights grt stronger. Is it possible to put with bimmercode that the lights will are strong at the first? Thank you very much!!
@carlos Moreno - so check two settings, first right next to your headlight switch there should be a scroll wheel, turn up the brightness and than also in idrive for the led strip. I know you can decouple the led from instrument cluster haven't seen increasing the intensity via bimmercode yet.
@@SheziMotorsport sorry but i dont have led strip in my f15. Only basic pack led. I turned up the light cluster with the button and it's still the same. Very low at first and if you press up it becomes strong. Thannk you very much for your response
@carlos Moreno - ok sorry didn't know you didn't have the led strip in the car than u won't have the idrive setting I was referring too. You don't be able to change the light brightness other than dial on the headlight module.
@youvraj sherrill - restore should take you to the original point but I have never done a restore and heard done horrible stopped about restore.. you are probably better off factory resetting your idrive.
Thanks! I watch all three parts of your video. Try to code expert mode. My 2015 X5 dosnt have 3076. It’s 3070 LCI color Master, and it have 8 layers instead of 3 layers😅. Any idea how to code 8 layers? Thanks!
@markman1000 - you sure it's not 8 default color options you see in idrive.. it should be top 3. Can u share some screenshots via Instagram...I can try to look.
@Marksman1000 i have the same but you only need to code layer 1 to layer 3 for each. The rest are usually inactive so doesn't matter if you change the colours, nothing happens because there are only 3 layers in the car.
I am trying to screen mirror from iPhone I got BimmerCode app and adaptor too and enable the video in motion but my iPhone is not mirroring. I have X5 2019 G05
Shezi Motorsport I can watch the video with USB and I m not sure if all them are active how can I confirm and where Can I confirm if they all are enable.
Screen mirror just for Android phone if you need to cast from iPhone if have HDMI Port can bay chromecast google and it work with eny phone but don't forget coded video in motion in bimmercode
@pete read - thank you, appreciate it. You can increases brightness not intensity through coding.. maybe picking the right color combination in layers might help a tiny bit with intensity..
@Avery Ortiz - from what I know f30 doesn't have option for different ambient lighting, you can have classic or modern only so I don't you will be able to change it.
hi when i try this i get to layer R1 for example I only get inaktiv 0x00 inaktiv 0x00 (both ticked) and custom value I do not have the colour options is there a way to enable these? TIA
I have OEM ambient lighting on a F10 5 series, I've seen a vid RUclips of someone with a F10 with the ambient lighting working. I am familiar with bimmercode but not with expert mode 😭
@kasimboxer - from what I know 5 series only had two color options and didn't come with multiple color option.. you can check my 3rd video as the developer had updated the ambient lighting options in easy mode ruclips.net/video/hQTiR2Ljr74/видео.html. I thought 5 series only had modern and classic.
@Miguel Black - in BDC or fem do you have 3070? Or do you see lcimastercolor with different module number.. depending on production date for you f15, I'm certain it came with idrive 5.. Please check for 'lcimastercolor'
@miguel black - then u would have to go in there and check for group and each ensemble layer, just like you would do in 3076.. can you please confirm that?
I did this and after a while the drivers door showed different colour than the rest of the car, I tried recoding but same problem, stock colours work fine though.
@david jacobs - if u go to ur idrive menu --> setting or vehicle settings --> lighting there should be two options. Classic and modern. Modern is white and classic is orange. Those two come standard even in f10. Please check and let me know. That's for ambient lighting
@Tsykel - f15 has only those options, where ambient can be changed the dome light can be changed as well but doesn't have layers like the dash,door,foot well.
It's all RRG hex codes, you can enter manually what ever rgb color in format rrggbb so every pair is hex form 00 to FF for specific r g or b Check some online rbg color picker... 00FF00 is all full green - because R=00 G=00 and B=00 FFFF00 is yellow 😂
Hey. Is there any way to increase ambient lighting in x5? I see on f30 you can, but can’t find info about f15
Is there a way to change the color in the control panel? I'd like the control (odometer) panel to match the ambient lighting. I currently have it set up to orange, but when I change the ambient lights to blue, would like the odometer panel tp change to blue too. Any thoughts?
@jimmygill5825 - not in F series that I know of.
I look forward to seeing how to purple back. I had in it and then the software update from BMW eliminated all coding from 3070 to this 3076 RGB. I can’t figure out now how to get it back. I had purple and green
Like me i can't find 3067 Lci master color i thank this update fuck to that game old car what you neeed to bay 2020 to change color
I have not on my meny ambient light , bmw x6 2015, can i turn on bimmercode?
Good afternoon I have a 2013 750LI my ambient light is really low how can I get this brighter all my settings are high I think
@Henry Jackson - seems to be that ambient lighting might be going bad. Have u also tried to make instrument cluster at bright and has that helped with ambient light?
@@SheziMotorsport yes I did that.
@@SheziMotorsport under the door handles and the door glove box. That is where the problem is at. Is this zone areas.
Hi did you know how to coding in f36 8 colour light
@llanelli80 - what do u mean by 8? Do you mean the 8th one in idrive or 8 different colors as new add on?
Thank you for the video. But if i want to code for example purple(i couldn’t see purple written anywhere) how i will do it?
@Arman Sokhakyan - you are not going to find purple, you will have to mix the ensemble layer R G B to get the purple tint. As in blue factory there is hint of green as well as it is selected by default...
So you can’t code purple correct?
@@ajsarai7864 - yes you can.. need to see which color combination makes purple...
Shezi Motorsport where can i know it?
@Arman Sokhakyan - by going into 3076 and going into ensemble layers and trying it for over of them different combinations..
Hello. I noticed that your iDrive system does not play media automatically on startup. For some reasons my media (Radio, CD) starts playing automatically when I start my car or switch on iDrive system. Do you have an idea of how to disable autoplay on startup, please?
Is this possible to do on f32 with id6?
@Tanbir chowdhury - if it has ambient lighting package yes you can.
Hey is there a way to change the name of it when you look at it in your car so you know what color you’re picking? (White - Orange to Purple)
@noah spring - very good question, but there isn't a way to change the name that appears on your idrive.
@@SheziMotorsport very nice video. Would you be able to help with instructions to enable ambient lighting when retrofit on f10
Hi!!!! I have a BMW F15 (2015) but when I entry to my car the interior leds are low but if I touch the button central to my top this lights grt stronger. Is it possible to put with bimmercode that the lights will are strong at the first? Thank you very much!!
@carlos Moreno - so check two settings, first right next to your headlight switch there should be a scroll wheel, turn up the brightness and than also in idrive for the led strip. I know you can decouple the led from instrument cluster haven't seen increasing the intensity via bimmercode yet.
@@SheziMotorsport sorry but i dont have led strip in my f15. Only basic pack led.
I turned up the light cluster with the button and it's still the same. Very low at first and if you press up it becomes strong. Thannk you very much for your response
@carlos Moreno - ok sorry didn't know you didn't have the led strip in the car than u won't have the idrive setting I was referring too. You don't be able to change the light brightness other than dial on the headlight module.
@@SheziMotorsport thank you very much
If you restore from your first backup will your original bmw ambient lighting go back to original?
@youvraj sherrill - restore should take you to the original point but I have never done a restore and heard done horrible stopped about restore.. you are probably better off factory resetting your idrive.
Okay thank you. Will using your original bimmer code backups before all the coding take you back to orginal settings?
Thanks! I watch all three parts of your video. Try to code expert mode. My 2015 X5 dosnt have 3076. It’s 3070 LCI color Master, and it have 8 layers instead of 3 layers😅. Any idea how to code 8 layers? Thanks!
@markman1000 - you sure it's not 8 default color options you see in idrive.. it should be top 3. Can u share some screenshots via Instagram...I can try to look.
@@SheziMotorsport thanks for the reply. I am sure it’s 8 layers for each ESS…
@marksman1000 - and do you see ensemble within each layer?
@@SheziMotorsport :it’s 8 layers within each ensemble… like ensemble 4…. Layer 1 …. Layer 8. Same for each ensemble.
@Marksman1000 i have the same but you only need to code layer 1 to layer 3 for each. The rest are usually inactive so doesn't matter if you change the colours, nothing happens because there are only 3 layers in the car.
I am trying to screen mirror from iPhone
I got BimmerCode app and adaptor too and enable the video in motion but my iPhone is not mirroring. I have X5 2019 G05
@roop kaur - did you connect to x5 wifi first? Also did you set all video in motion settings to enable?
Shezi Motorsport I can watch the video with USB and I m not sure if all them are active how can I confirm and where Can I confirm if they all are enable.
@roop kaur - it should be in the head unit module in regular coding not expert.. can you look in there please.
Shezi Motorsport yes they are enable
Screen mirror just for Android phone if you need to cast from iPhone if have HDMI Port can bay chromecast google and it work with eny phone but don't forget coded video in motion in bimmercode
Great video, have you found any way to increase the intensity?
@pete read - thank you, appreciate it. You can increases brightness not intensity through coding.. maybe picking the right color combination in layers might help a tiny bit with intensity..
Shezi Motorsport I have a 2017 X5. Could you do the coding for me remotely or In person? Where are you located?
Can this be done with the f36?
@hemichris2680 - do you have ambient lighting package? If so yes.
Thanks for the new video. Very helpful.
I was working on an x5 f15 and the 3076 coding option wasn’t available for me. Is there another way to code ambient lighting?
@ezekiel Aguilar - do you have 3070 or 3073 option that shows ambient lighting?
Can I do this with an F30 ? Interested into purchasing .
@Avery Ortiz - from what I know f30 doesn't have option for different ambient lighting, you can have classic or modern only so I don't you will be able to change it.
2018 bmwf30 entry evo can do this?
@Tun - sorry you won't be able to as u have only orange and white options.. I corrected myself in part 2 of the ambient lighting video...
hi when i try this i get to layer R1 for example I only get inaktiv 0x00 inaktiv 0x00 (both ticked) and custom value I do not have the colour options is there a way to enable these? TIA
@mathew Caruana - what car are you doing this on?
Can you code the i8 to red?
@Teletubby Po - yes you can. You need to get the RGB values and code it.. I haven't done red so don't have exact values
I have a 2017 X5. Could you do the coding for me? Where are you located?
@N S northeast Ohio.. reach out via IG..
I have OEM ambient lighting on a F10 5 series, I've seen a vid RUclips of someone with a F10 with the ambient lighting working. I am familiar with bimmercode but not with expert mode 😭
@kasimboxer - from what I know 5 series only had two color options and didn't come with multiple color option.. you can check my 3rd video as the developer had updated the ambient lighting options in easy mode ruclips.net/video/hQTiR2Ljr74/видео.html.
I thought 5 series only had modern and classic.
@@SheziMotorsport ruclips.net/video/p_0X7gti1vI/видео.html here is the vid i seen
Do you know how to change the ambient lighting on iDrive 6 using bimmercode expert mode.
@k05 - do you have the 3070 or 3076 ? And do you have fem or bdc?
@@SheziMotorsport i figured it out, i have 3076
My 2016 X5 doesn't have 3076?
@Miguel Black - in BDC or fem do you have 3070? Or do you see lcimastercolor with different module number.. depending on production date for you f15, I'm certain it came with idrive 5.. Please check for 'lcimastercolor'
@@SheziMotorsport yes I have 3070 lcimastercolor
@miguel black - then u would have to go in there and check for group and each ensemble layer, just like you would do in 3076.. can you please confirm that?
I did this and after a while the drivers door showed different colour than the rest of the car, I tried recoding but same problem, stock colours work fine though.
@MO Al - did you type in custom code for color or did you choose from there list? What idrive version do u have?
Does it work on a 2017 5 series G30?
Many thanks
@andrei ionut - did the car cover with ambient lighting options? Different colors?
@@SheziMotorsport yes
Hi does a 2014 550i xdrive msport have that? I have bimmercode
@david jacobs - I'm sorry it does not. As f10 only have two options of modern and classic.
@@SheziMotorsport thanks for replying that's better then nothing so your saying i can get modern and classic colors to glow in my cars interior?
@david jacobs - if u go to ur idrive menu --> setting or vehicle settings --> lighting there should be two options. Classic and modern. Modern is white and classic is orange. Those two come standard even in f10. Please check and let me know. That's for ambient lighting
how can I make all 3 layers lilac?
@ibby - I don't have the exact code if u search for w3s or rgb color change, it should tell you exactly what you can change the values too..
In AMBIENTE_MODUS could u tell me what option do you have applied
@imatiaz talukder - do you mean what changes to each layer to make color different, if they are in the video...
@imtiaz talukder - look around 7:55 in video...
Shezi Motorsport can we talk on insta my @ is imt14z
WILL THIS WORK FOR BMW X5M F85?
@cincar2 22 - yes it will
There must be more selectable LAYERS, also seems like you are forgetting the Dome light (GROUP_0_FABRE_ENSEMBLE_x)
@Tsykel - f15 has only those options, where ambient can be changed the dome light can be changed as well but doesn't have layers like the dash,door,foot well.
😃
It's all RRG hex codes, you can enter manually what ever rgb color in format rrggbb so every pair is hex form 00 to FF for specific r g or b
Check some online rbg color picker... 00FF00 is all full green - because R=00 G=00 and B=00
FFFF00 is yellow 😂
Nice
how did you change your lights?
Can i do this to my bmw 640d gran coupe f12 2013?
@Seidzan - in sorry boss, 6 series will not work as it doesn't have ambient colors, I did reference this in my 2nd video. Apologies