I always enjoy watching you build these speaker boxes. Most people would buy pre-packaged stuff and assemble it. You always make literally everything from scratch or take apart other devices to fill your needs. Thanks for the entertainment...
I don't know nothing about circuit boards but I decided that I will build my BOOMBOX no matter what. I am a full time carpenter and good with hand tools and wood. The only thing I will have to acquire knowledge is soldering and schematics (electrical). Thank you for sharing your work with all of us.
We've got soundboks 2 at the gym and it's a pain at higher volumes, for that ridiculous price you're better off with JBL Boombox or a DIY project like this one
Buen trabajo de construcción de caja, excelente acabado, muy bonita, pero esperaba mayor contundencia de graves en mis audífonos, pero en total muy bien.
I'm impressed with the BassFace products, although I wish I'd bought more pre price hike. I have a pair of the SPL 69.1 in a boom box - 2 1.1 cubic feet enclosures tuned to 50Hz with twin 2.5" ports in each box. Good bass output and nice mids and highs with only the single dome tweeter, rather than 2 or 3 tweeters with clashing frequency range as is common on budget 6 x 9 drivers.
Estupendo proyecto mi querido amigo.....toda una obra de arte....debería haber rellenado el interior de la caja con un material absorbente, vería la diferencia de sonido con respecto a los graves....Felicitaciones compañero....
@@DTeK😢Please, I want you to sell this speaker to me. In fact, specify the amount of money you want and I will give it to you. Please do not ignore my comments. I am serious about what I say.
Muito bom. Parabéns. Você sabe o que faz mano parabéns. Desde o início fazendo a caixa soldando os circuitos. O pack de bateria. Os autos falantes muito bom assim e bem legal fazendo do zero.
My speaker screen doesn’t come off is there any way or tips I thinks is glued .. but I want to paint my speaker white only because it doesn’t match my decor . Can I just spray paint it
Very good work, especially for the case, best Ive seen so far. But amplifier, crossover and speaker wasnt the best coise... something with dsp would make a big difference
@@DTeK I will build something like that with 2x B&C 10CL51-4 and 1x Peerless BC25SC08-04. And Sure DSP with Bluetooth Module and 3x 200W@3Ohms Amplifier But its not my final configuration
if you made a shared chamber maybe you could of saved a little bit of internal space, with just a small brace, and make one big port, might of got more deeper frequency.. and you haven't showed if you add any acoustic material, or polyfill, it could make the bass a little deeper
Looking for some help with my build electrical wise, I'm using an old car head unit and 2 pioneer 2 way speakers. The power sauce I'm using is 2 x 7.4 lipos connected in series so there is 14.8v I've connected these to a buck converter and dilled the voltage down to 12v these are powering the system for a little close to 3 hrs. So I'm thinking of using a 12v 7ah motorbike battery. If I connect the radio negative lead to negative of the battery and the memory lead yellow to positive do I need to put inline switch on the red lead to the battery to kill power before charging it wanting it to be a sealed unit
Yes, to turn the radio off you will need always a switch in the positive wire (red), if you keep the ignicion wire (yellow) always connected it will save your date/hour and radio setthings but it will also draw some current.
@@DTeK thanks mate, so I can keep the 12v battery inclosed in the box turn the power off the radio will still keep its memory and I can plug in a wall charger to top the motorbike battery up
@@DTeK yeah I understand that but how do I remove just whats making it a sub now so I can add crossovers, I have crossovers from 3 ways home stereo speakers I took out of something years ago but like I said this is a powered sub box , the one I use for my stereo actually allows me to switch it to a high pass filter and tells me how but this JBL is a lil different and doesn't mention anything anywhere about high pass it's like jbl180 I think. Has 250 watt amp on board thsts all i took out was the guts il use the 10 inch sub some where else some time down road or give to someone who needs, same with box but I popped the guts out and plan on building a much smaller box with just 6 inch sub 6.5 mid and a tweeter making it bluetooth and keeping out in the shop. So any help u can give me greatly appreciated
I've just had this thing sitting on a shelf for bout 6 years now and have a little 8 inch powered sub I already had b4 I got JBL n even though it's not half the total size or wattage the JBL it blows it out the water so thsts why it was shelved I picked up cheap though and seen the size of it and knew what my small put out so was expecting this huge difference and was very disappointed bass that it did produce wasn't that good to begin with not sure if I am able to post a pic here but if I can il send pic of amp so maybe you can see what I would need to disconnect so that all frequencies can come thru then I csn block myself
So you want to modify a 1 channel subwoofer amplifier into a full range stereo amplifier, maybe its possible, maybe not, depends the type of hardware you got, but i guess it will need a lot of wiring and a some hardware changes.
@@DTeK I tried to post a picture of the guts that came out of the jbl sub180 but wont let me it does have 2 speaker connects that say in and two thst also say out then has left n right line level in RCA's snd one LFE line level in RCA but as I did not buy this new or anything I don't know much about it I just picked it up cheap at a yard sale long time ago
Check video description for parts list, music names and additional infos.
Thank you for watching :)
Price kitna hota hai ye pura bananeme please msg me muze banana hai
I hi uh kh hi
बेस की किमत
लेना हैं
Ok
I always enjoy watching you build these speaker boxes.
Most people would buy pre-packaged stuff and assemble it.
You always make literally everything from scratch or take apart other devices to fill your needs.
Thanks for the entertainment...
Thanks, glad you liked
I don't know nothing about circuit boards but I decided that I will build my BOOMBOX no matter what. I am a full time carpenter and good with hand tools and wood. The only thing I will have to acquire knowledge is soldering and schematics (electrical). Thank you for sharing your work with all of us.
Thanks, glad you liked
The point that he took the extra effort of painting the inside of the box shows his dedication.
Nope. Shows how much time he has still on lockdown 😂😂😂. (Quarantine)
😷😷😷🤣
Pretty sure that was sound deadening to prevent rattling
Matthew Falcon looks like paint to me because sound deadening does not look like that
Musti looks like roll on bed liner to me..
Yes its normal paint, i did it to make the airvents even darker without any "refections" from the inside.
Started watching this and then I heard one of my songs being used as background music ahahah
That´s awesome ! i love that music ! got it from NCS :)
Finding Retrovision is a DIY guy 🙌🏻🙌🏻
Mais que fait retrovision sur cette vidéo ? 😂
your songs are amazing!!
What is that song called cause it sounds like techno 😳
Really beautifully made 👌 still amazing that this little amplifier can bring this power 😮
You should be a gynaecologist with all that inside work mate, bloody brilliant
Amazing build Well-done 👏👏👏🔥
It looks like sound books speaker 🔥🔥🔥
thanks:) it was based on soundboks
@@DTeKyour welcome 💜💜 Amazing 👏👏 keep making awesome things 💜💜 love it
राम
@@DTeK😢Please give me this speaker. I loved it. I want to buy it from you. Specify the amount of money.
I made one my self. I like you're idea with the amplifier 👌
Very nice bluetooth speaker 🥰🥰🥰🥰🥰🥰
Hey Brooo, Love You From India 🇮🇳, Can You Give Me This Beautiful Speaker 🙏🙏🔥🔥
I love this one and I got to get it ❤
Thanks, i build them for my personal use only
Well done my friend. It's nice to see you separate and seal the speakers. Impressive box 👍
thanks :)
Your builds are look more professional with each one you make... it would take some time looking at it to realise its handmade super impressive!
Thanks, glad you liked ;)
Love ur projects, it really looks like the soundboks :D
it doesnt
They suck
I used your video to build the exact sme speaker with 2 passive radiators on the back it rlly helped
thanks :)
Nice man, you broke the system, you are an icon
Fgyfu użytku fifoyykghghjgyi
Nice🔥 it looks like soundbooks speaker
Thanks :)
Probably sounds even better
We've got soundboks 2 at the gym and it's a pain at higher volumes, for that ridiculous price you're better off with JBL Boombox or a DIY project like this one
@@nobodysfavourite6953 Yes i also think this :D
btw. I make JBL BASS Tests
Pasha ES
I saw your Hard work 👍
incredible, it was perfect .. 👌👏
Thanks, glad you liked
I
Nice work 👍
This look like something I could do. Great video
Nicely built
Very cool! Love the way it looks finished also.
Thanks, glad you liked
@@DTeK🥺😍😍😍Please sell me this speaker. Sorry, I have commented on you a lot. Lacti Egypt. I want the speaker. I really like it.
Buen trabajo de construcción de caja, excelente acabado, muy bonita, pero esperaba mayor contundencia de graves en mis audífonos, pero en total muy bien.
Oye amigo se olle muy feo a mi gustan mas el sonido grave q agudo alguien sabe si las vende. O q pez
Great box and great work. Do another project.
Отличная сборка! Звук - бомба! 💣
Thank you. I've been wanting to find a video for a DIY subwoofer. You think you can make one someday?
I have done 3 projects using subwoofers (2.1) , one day i will do an high power dedicated subwoofer
I'm impressed with the BassFace products, although I wish I'd bought more pre price hike. I have a pair of the SPL 69.1 in a boom box - 2 1.1 cubic feet enclosures tuned to 50Hz with twin 2.5" ports in each box. Good bass output and nice mids and highs with only the single dome tweeter, rather than 2 or 3 tweeters with clashing frequency range as is common on budget 6 x 9 drivers.
Fantastic project 🔝
Самая крутая работа которую я когда либо видел
Nice job
Estupendo proyecto mi querido amigo.....toda una obra de arte....debería haber rellenado el interior de la caja con un material absorbente, vería la diferencia de sonido con respecto a los graves....Felicitaciones compañero....
thank you for your comment and sugestion :)
@@DTeK😢Please, I want you to sell this speaker to me. In fact, specify the amount of money you want and I will give it to you. Please do not ignore my comments. I am serious about what I say.
well done, great instructional video. Quite satisfying to watch
Bravissimo. Una cassa cosi compreso di tutto puo' valere 500 E.❤
good job, compare it to the real soundboks!
Nice made
Devonitiv geil! Super Arbeit 👌🏻
Muito bom. Parabéns. Você sabe o que faz mano parabéns. Desde o início fazendo a caixa soldando os circuitos. O pack de bateria.
Os autos falantes muito bom assim e bem legal fazendo do zero.
Отлично! Чудеса из фанеры и золотые руки.
Я думал, никто из русскоязычных не смотрят его
@Валерий RC, мне целый год
Impressive performance for a homemade party speaker.
How long do the batteries last with moderate volume?
Very nice Speaker :)
Awesome video
This background music used MRX hindi gameing in his Pubg Gameplay I love your background music and your hard work 💯💪💪👌
Awesome yrr, greatfull work 👌
सबसे लोकप्रिय है।
What is the purpose of the crossover? Do I need one if I'm getting a 12 volt battery?
Hello, the crossover is to send the lower frequencies for the woofer and the higher to the tweeters, its a sound filter
Can you do one with a subwoofer that would be dope
R
😄😇😄😄😄😄😁😇🏉👔👔👔👔👕👔👕🩴🍓🍓🍓
Q
@@yasemintoprak2315 ko
Very nice sir
My speaker screen doesn’t come off is there any way or tips I thinks is glued .. but I want to paint my speaker white only because it doesn’t match my decor . Can I just spray paint it
une entrée ligne aurait été cool pour brancher des platines DJ, cela peut encore ce faire facilement
mais c'est du très jolie travail !!! bravo
Is the small button you press after the switch for power? Or what is the purpose of that?
its the battery level indicator switch
Hello, does someone know why is he adding extra holes with pipes in the box ?
super power basss🖐️🖐️🙋♂️
good job bro
Very good work, especially for the case, best Ive seen so far. But amplifier, crossover and speaker wasnt the best coise... something with dsp would make a big difference
Those speakers have low bass, i will change them in the future
@@DTeK I will build something like that with 2x B&C 10CL51-4 and 1x Peerless BC25SC08-04.
And Sure DSP with Bluetooth Module and 3x 200W@3Ohms Amplifier
But its not my final configuration
@@5chiffi You have a video on this?
Great Job....forgot the acoustic foam....!!!
Не хватает высокой середины, писчалку нужно подобрать с началом диапазона пониже соответственно и раздел частот между динами
Wah rapi ya bang bagus haasilnnya
Wah rapi ya bang
Brother, where can I get this speaker. Please tell me. This speaker pleases my heart. What is its value?
❤❤❤
if you made a shared chamber maybe you could of saved a little bit of internal space, with just a small brace, and make one big port, might of got more deeper frequency.. and you haven't showed if you add any acoustic material, or polyfill, it could make the bass a little deeper
Колонка супер, только как обычно во всех подобных видео нет нигде описания какие компоненты использовались или хотя бы ссылки давали.
Good device!
I wish I could have one.
Great👌
No need to paint its plywood color is already beautiful
Where is the available reciever modul
यह स्पीकर कितना वाट का है कितने प्राइस तक पड़ सकता है
Looking for some help with my build electrical wise, I'm using an old car head unit and 2 pioneer 2 way speakers. The power sauce I'm using is 2 x 7.4 lipos connected in series so there is 14.8v I've connected these to a buck converter and dilled the voltage down to 12v these are powering the system for a little close to 3 hrs. So I'm thinking of using a 12v 7ah motorbike battery. If I connect the radio negative lead to negative of the battery and the memory lead yellow to positive do I need to put inline switch on the red lead to the battery to kill power before charging it wanting it to be a sealed unit
Yes, to turn the radio off you will need always a switch in the positive wire (red), if you keep the ignicion wire (yellow) always connected it will save your date/hour and radio setthings but it will also draw some current.
@@DTeK thanks mate, so I can keep the 12v battery inclosed in the box turn the power off the radio will still keep its memory and I can plug in a wall charger to top the motorbike battery up
I like this system it has all
Nice lovely ❤️
Top meu camarada Deus abençoe sua inteligência
Im building a speaker with 2 woofer and i also want to have 2 tweeters but how should i Connect Them, i have a stereo amplifier
check description for wiring
👏👏👏 Top in The top
Tem como desligar os agudos? Se sim. posta vídeo só bass
Again, nicely done. But I don't see the used tweeters in the "used components list", only see the woofers!
i will add, thanks
how many speakers in how many watts
This speaker looks awesome! where'd you get that grill from?
I bought it in a local shop
Ater koto dam hote pare...????
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 PERFECT 😱
Good to go👍
Sir aap ismeh kitna mm ka ply use kiya aur agar 80+80 watt ka woofer ya subwoofer ke liye kitna mm ka ply use karna padega accha deep bass ke liye
Thank You
where can you find the mesh grill ?
i bought it in a leroy merlin shop
👍👍👍...one Beyet 😎 wo kann ich bestellen 😉
When you're so DIY even your dremel is custom. 😂
Very nice speaker:)
Day 2198 of just watching diy videos but making non of these
Been making something similar but mine is a bit bigger 🎉🎉😂
Hi! Great job! I have a question. Do you have a video where you can make the smallest buffer in a small car?
Wow nice
a question as soon as it comes out ask one or if you sell thanks
Kya price Rahega Boss
How can I make a regular bluetooth speaker from old powered subwoofer? I want to play all music not just the bass?
If you want to play all the frequencies you need a subwoofer, mid range woofers and some good tweeters, with the correct crossovers
@@DTeK yeah I understand that but how do I remove just whats making it a sub now so I can add crossovers, I have crossovers from 3 ways home stereo speakers I took out of something years ago but like I said this is a powered sub box , the one I use for my stereo actually allows me to switch it to a high pass filter and tells me how but this JBL is a lil different and doesn't mention anything anywhere about high pass it's like jbl180 I think. Has 250 watt amp on board thsts all i took out was the guts il use the 10 inch sub some where else some time down road or give to someone who needs, same with box but I popped the guts out and plan on building a much smaller box with just 6 inch sub 6.5 mid and a tweeter making it bluetooth and keeping out in the shop. So any help u can give me greatly appreciated
I've just had this thing sitting on a shelf for bout 6 years now and have a little 8 inch powered sub I already had b4 I got JBL n even though it's not half the total size or wattage the JBL it blows it out the water so thsts why it was shelved I picked up cheap though and seen the size of it and knew what my small put out so was expecting this huge difference and was very disappointed bass that it did produce wasn't that good to begin with not sure if I am able to post a pic here but if I can il send pic of amp so maybe you can see what I would need to disconnect so that all frequencies can come thru then I csn block myself
So you want to modify a 1 channel subwoofer amplifier into a full range stereo amplifier, maybe its possible, maybe not, depends the type of hardware you got, but i guess it will need a lot of wiring and a some hardware changes.
@@DTeK I tried to post a picture of the guts that came out of the jbl sub180 but wont let me it does have 2 speaker connects that say in and two thst also say out then has left n right line level in RCA's snd one LFE line level in RCA but as I did not buy this new or anything I don't know much about it I just picked it up cheap at a yard sale long time ago
Best box
where to score a grill like that?
I bought it in a leroy merlin shop
Сколько же колонка по запчастям выходит? Готовую не проще
Muito bom,espetacular👍
Dp
1 colom banvana hai 12 inch ke 2 speaker price kitna loge same aisa hi rahega speaker ke upper tuter rahega