Fixing An Exploded Playstation 3 - Failed Tokin Replacement and Live Stream Follow Up
HTML-код
- Опубликовано: 10 сен 2024
- In this video I'll be repairing the damage I caused to my YLOD CECH03 when attempting to replace the Tokin capacitors on a previous live stream at • PS3 CECH03 YLOD - Lets...
I failed to bridge the VCIN and VCOUT of the power rails for the RSX and CELL processors respectively. When powering on the system as the capacitors weren't in parallel they ending up detonating like small PCB atomic bombs.
Special thanks to TheWiizePods and Wayne's Noob Repair UK at / @getrefurbed for pointing me to some useful resources on PS3's. Extra special thanks to EarlGrey and RBKing80 for being awesome.
Want to support me and the channel? Feel free to tip at streamelements...
Join us on Discord! / discord
Looking for a repair, recap or mod? Email me at newretrorepair@gmail.com
Tools & Equipment Used
Main Camera: www.sony.co.uk...
KSGER T12 Soldering Station: www.aliexpress...
Eakins Trinocular Microscope with Camera Module: www.aliexpress...
Atten ST-862D Hot Air Station: www.aliexpress...
Desoldering Gun: www.aliexpress...
Fume Extractor: www.ebay.co.uk...
ESR Meter (Peak Atlas ESR70): www.peakelec.c...
Multimeter (Kaiweets HT118A): www.amazon.co....
Desoldering Wick: www.chemtronic...
Solder 63/37 Leaded: www.ebay.co.uk...
Flux (No-clean): www.ebay.co.uk...
Precision Tweezers: www.ebay.co.uk...
Well done on the repair. Knew you would fix it in the end.
The promising moments and now it works 😁 but its funny how it went bang 😂
thick wire is always good :) TheCod3r's bot says you're a legend but I think this PS3 is also a legend!
Nice work, congrats on completing the repair successfully !
Thanks Micro!
Oh wow you actually got it to work thats great! So the power supply was still good? Nice fix man!
Dosvedanya Isn't that a Nicolas cage thing? meaning, something along the lines of: we meet again' Goodbye. I like fudge! gets sickly if you eat to much 😁
100% Correct!! Dan with regards to the' Tantalum caps polarity the -- marking is the positive. thru hole they mostly have a + next to the voltage number. 🖖👍
Thank you for great video.. I have question do you know the value of smd capstors that tack place where cobra sata mode installed on Ps3 motherbord.? I have Ps3 slim cech a3006. I have cobra ode chip not working. So my Ps3 working now but the driver doesn't read DVD because capstors are removed
I got a backwards compatible fat PS3 throwing error core 3001 from syscon which is 12v rail fail but tested power supply and it's good. Could it be these capacitors?
I've got an A01 that I had a load of tants blow on, probably for the same reason of not jumping or a short from my poor soldering. I replaced my caps again, jumped properly, and took good care in my soldering. Now when I attempt to power on the console I get a solid red light on standby, hit the power button, get a beep, then no power. The power will stay completely off for a while until the red light will finally come back and I can try again, issue repeats. I tested the PSU on my main A01 and it tested good. Fuses look and test good, and the only other visual evidence of damage I can see is some charring by a set of resistors near the DRAM circuitry, but there is a mirror of this circuit in good shape and all resistance values appear identical. Any idea what I should look out for next?
I have the same problem. Can you help? Thanks
Honestly, it could be anything. Just go through the usual electronics repair steps. Visual inspection, test, meter things out. Check things on the same power line as the blown tantalums, etc.
Which capacitors have you used please? - i mean smd dimensions and capacitance
Hello, what are the actual tantalum replacements used here? I don't see a link in description and I cannot seem to find these more short and square looking units online !
www.aliexpress.com/item/1005001803924849.html 220uf 6.3V are the ones I used. I tested each one using an ESR meter as well to be sure they were up to the job before installing them.
gr8 fix!
Hi! Why you put on one side 4 capacitors and on the other side 5 pieces? And why you jumped them with the upper lines? You don’t have any capacitors here. No offence, I’m just courious abot this topic :)
Ok, gotcha. I found your stream and I’ve seen that you replaced all Tokins ;) Now this jumper cable makes sense.
Great fix mate
So, just 2 jumper wires on CPU/rsx side?
It doesn't matter which side. The boards share the same rail. As long as you jump it with sufficient gauge of wire. With that said though, chances are if it's a YLOD it'll be a 3034 error. I'd suggest using a TTL adapter to read the syscon error codes before just swapping caps.
@@NewRetroRepair oh... Shot... I have had 2 PS3 60 GB models, ps/PS2 playback with the NEC taken ofd for the last 6 years... Idk why... But I have that urge to finally move forward on those repairs 😂
Could you kindly update us on the longevity of this fix? Thanks
It's still working so far! YMMV depending on why the console failed though of course.
@@NewRetroRepair tar muchly.
my ps3 was delided capacitors change work for two years now ylod again can thé capacitors fail again
@@carlondouglas5741 Unlikely, you would need to read the error codes to see where the fault is.
I replace nec token with 470.. The yellow lite of death still com
Try diagnosing the fault rather than blindly swapping parts. Google "PS3 Syscon Reader". Do some reading. That should help.
*FUDGE* Yeah!!! LOL
Try a heavy game like gt6 or the last of us to see if the console can stay on for a good period of time
Can I PM you, new retro repair?
Of course! My discord is linked in the description as is my email. Feel free to use either
@@NewRetroRepair Awesome! I’ll message soon. Thank you 😁
👎 Dislike with the Like button on this comment.