Thank you! I took your essentials class in 2015, and am now a full time SW user! It took a while to get to the point where I could utilize assemblies, and the flexible assembly has been so helpful!
Is it possible to have the part be rigid at the subassembly level for drawings so it always shows it the same way, but then flexible in a master assembly to show the motion? Like if you have a drawing with the cab, and you want to always show it with the doors closed, but you also want it to be able to be opened up with it's in the full truck assembly? So if you made a drawing of the truck when you had the door closed and then you opened the door and reloaded the drawing, is there a way to always show an assembly in a certain state in drawings?
Hi Scott, thank you for your feedback! Could you fill out our form here: bit.ly/2DNqU9N and one of our engineers can reach out to you directly to go into more detail on the assembly.
If you are using Layout Sketches or In-context design, you may not be able to make that subassembly flexible. To represent motion for such designs one approach would be to build a new second subassembly with the other components inserted. Since they are not defined in the context of that new subassembly, it should allow the motion.
This does not completely work ! If you have subassembly with multiple points of movement NOT ALL OF THEM ARE FLEXIBLE , ONLY SOME OF THEM . Thought I'd point out another fine example of the extreme difficulty in using this BS software .
very accurate and straight to the point video, still holds up 5 years later!
Thank you! I took your essentials class in 2015, and am now a full time SW user! It took a while to get to the point where I could utilize assemblies, and the flexible assembly has been so helpful!
Hi April, I remember you! I'm super happy to hear that! I hope SOLIDWORKS has been good to you over the years.
You are a life saver! Thank you so much!
Great video, straight instruction, no fluff. Thank you
thanks a lot. I've been spending 2 hours to solve this problem. Dont think this could be such easy like that!
Thanks! Was searching for a while this feature
Thank you so much for the clear and concise explanation!
A gentleman and a scholar.
Your truck assembly model is fabulous sir 🙏
thank you for the video, helped me MUCH!
thanks a lot... you saved my life and my project.
Oh my god thanks, you saved my life
Thank you
Thanks
Very helpful.
Thanks
Thanks a lot!!! I didi it all my life too complicated!
The video was incredibly helpful. Thanks a lot
I was worried, you helped me thanks
Really grateful to you 🙏
YOU SAVED ME! THANKS!
You really saved me there! Thank you!
Thanks a LOT!!!
Huge help sir appreciate your efforts
You are life saver. great job
Awesome!
Thanks man!
you sir are my hero
thanks
Thank you!!!
Comment to myself: 1:38
Nice video
thanks a lot, I didn't know that
THANK you!!!!!
You just rocked my world :D
thanks man
Thank you so much sir.
Thank you for making life much easier ! Additionally can you tell me what kind of mate you have used on back door to open it like in 0:52 ?
How did you make the tailgate swing? The tailgate appears to remain plumb, or vertical as the bed is articulated.
Thanks..I got it..
thanks, very helpful
Thankyou. very helpful
thank u so much ...
ty>>>>
Thank you, U saved a lot of time
oh my god THANK YOU
de mucha ayuda, gracias!
What about a flexible sub-assembly within a sub-assembly within an assembly? I'm having trouble making this work.
Is it possible to have the part be rigid at the subassembly level for drawings so it always shows it the same way, but then flexible in a master assembly to show the motion? Like if you have a drawing with the cab, and you want to always show it with the doors closed, but you also want it to be able to be opened up with it's in the full truck assembly? So if you made a drawing of the truck when you had the door closed and then you opened the door and reloaded the drawing, is there a way to always show an assembly in a certain state in drawings?
Hi Scott, thank you for your feedback! Could you fill out our form here: bit.ly/2DNqU9N and one of our engineers can reach out to you directly to go into more detail on the assembly.
It didn't work for there is a massage that sub assembly with layout sketches must be kept rigid
How can i fix that please
If you are using Layout Sketches or In-context design, you may not be able to make that subassembly flexible.
To represent motion for such designs one approach would be to build a new second subassembly with the other components inserted. Since they are not defined in the context of that new subassembly, it should allow the motion.
@@hawkridgesystems thank you very much
Thanks! ruclips.net/video/uhPKtI6pFok/видео.html
This does not completely work ! If you have subassembly with multiple points of movement NOT ALL OF THEM ARE FLEXIBLE , ONLY SOME OF THEM .
Thought I'd point out another fine example of the extreme difficulty in using this BS software .