Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel
@@v4gab0ndINNIT Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel
Amazon sells a micro sd ribbon extension cable about 6 inches would allow you to be able to change SD card. Without having to remove the pi more than one time.
Looks like they plan to make a RPi4 version of it, so it might be worth waiting for. Unless they drop the price on this model to make room for the 4's, of course.
Pretty cool actually. 300$ a little pricy. I can do a custom version with a small pelican case though. Ok. It is really really cool. Wouldn’t need all the I/O stuff. Dam. Now I want one. Would need an external flash drive though. It has everything else, why not that?
Pretty much senseless, all the components are soldered so you can't seriously work and experiment with them, complete waste of money, except of the Raspberry Pi everything else cost like one dollar per piece, most things even ways less, don't know how he came to over 260 dollars, except of that he makes hidden advertisement.
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my homepage
$240? I built a similar all-in-one raspberry laptop for about the same cost using a pelican gun case. Except for I used a 2k 10” display and a decent sized usb power bank to power the whole thing wirelessly. I built it to game using steam link and Parsec.
I was looking to buy that very same thing but was hesitant you to the prize and I didn't want spend that kind money on something I might be junk especially since I have all the parts you more or less do it myself but after this I think I may actually buy it
I understand this is pretty much the best thing on the market right now, but the biggest barrier to entry for most people is the price tag, IDK why all of these kids are so expensive. If you're willing to solder the price goes down so much.
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel✨👏
I just purchased the CrowPi to mess around with it. As an experienced hardware and software designer for casino games, the big thing that’s missing for me is access to the address and data bus.
I just started in arduino and need to move into the raspberry pi. looks very nice just dont know if i can get over that price tag. but that case makes it very tempting
Thanks for the video! I've been waiting for something just like this. Still... I wonder why they choose such a small display. The case could clearly hold something a bit larger. It reminds me of a PowerBook. LOL.. I had considered building something like this with a pelican case. I wonder how it would hold up to a kid walking home after school in the rain?
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel
I don't think I would recommend buying a starter key with everything already wired up on a single board if you want to learn programming and electronics. I recommend learning to program on a PC then learning the electronics with a "bag of parts" kit. With everything already wired up, you don't really learn how to build circuits. Building circuits is the foundation of electronics. Also, you need to be able to place your peripherals where you need them. E.g. The acoustic ranger on this thing is always pointed at your face.
@@davidfrisken1617 interesting idea. I can see it being useful for teaching or experimenting. it would be fun to see something raspberry pi based like this show up in a movie as the evil villain's briefcase master control device...
Just to be clear, commenting here is not how you enter the giveaway. You need to click through and put that into the giveaway widget on the review article.
Not quite as portable as it is made out to be. You need a 2nd case just for all the other stuff it came with. Still, looks pretty good for that price. Good for learning coding.
Ah, the ones with the little springs you would clip wires into, and somehow you ended up with a radio picking up random signals from France. Those were the days. ;)
I have looked at this one eBay and other sites. Pretty cool, but it doesn't allow for expansion boards which is a large part of it so you're limited to only the 8 or so thing I comes with. I can put together a better kit along with expansion boards for less money but I know nothing of programming and little of circuitry.
Someone from @HackADay needs to make a version of this with the proper Official touchscreen, Dangerous Prototypes' hardware instead of tinkertoys, SDR, solars and a battery.
There's actually a CrowPi 2 being kickstarter now, though I don't think it would be delivered in time :( www.makeuseof.com/tag/crowpi-2-raspberry-pi-laptop-launch/
$350 for that ? pass...how do you think this is even remotely what any user needs? look more like a classroom /education thing. having that many integrated sensors defeated the purpose of the pi. the trim on that case had better be white gold. otherwise the parts breakdown makes this a massive ripoff.
What racing game was you playing on this video.....it looked a bit much for a 3b+ but I'm putting together a adventure pi style portable pi 4 gaming box just for camping trips/my Xmas gift to myself lol
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel⚡
it's a nice kit, but you could buy all this seperately and have someone 3D print an enclosure, and save about 60$ and i honestly don't know any makers who would buy components from amazon :P
Just to be clear, commenting here is not how you enter the giveaway. You need to click through and put that into the giveaway widget on the review article.
Expensive and personally part of the pi is doing solder8ng and breadboards also. Having all those sensors in a case limits their actual use. Idea is cool but not cool at their price many of those parts can be bought in a huge kits for like 60 bucks.
Try getting that case through Customs lol
lol it does have a 80 spy kit kind of feel doesn't?
... or TSA! 😄
craig gilchrist as easy as pi as easy as pi.
I was about to type a bomb joke
The TSA isn't staffed with dropout idiots, but complete professionals. They would handle this will aplomb.
I was worried that this guy might loose his breath or something
In italy there was a man that has is way of marketing, Roberto Da Crema, that is similar.
ruclips.net/video/6O13E-6jNOg/видео.html
na bhai lol
He's speed reading 📚
This thing looks like it will self destruct in T-minus
Me: Where do I get one?
Advertisers: Only a few miles away as the Crow Pi's.
Amazon
…
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel
Try getting that through airport security....
haha yeah
Just chuck it at the security, he will understand its a pi once he sees a rasberry bpi
@@wzr3293 yeah...
I remember when the cheapest computer, without a monitor, with 16k memory was close to 500 dollars. This kit is very cool.
Much nicer than it's predecessor, the CowPi. Lol, sorry, couldn't resist.
Thanks its a really good one
@@v4gab0ndINNIT Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel
My Only question as a kid that grew up in the 70's "Does it Explode?"
If you attach RDX to it. Then yes it does
Thanks. I was thinking about jumping into some pie. You just saved me months of time.
The CROW PI looks like an ideal development system.
Amazon sells a micro sd ribbon extension cable about 6 inches would allow you to be able to change SD card. Without having to remove the pi more than one time.
Excellent, that question came to mind about an extended for SD card. Good Job!
Easy access fix for the micro sd slot, micro sd/tf ribbon cable adapter. 😁
Only 1 Ethernet LAN port, Atleast 2 Ethernet LAN port is required for building network application
Good luck getting on a plane with that !
😂
Does it come with the sticks of dynamite or do you need to buy them seperately? It even looks like its got a countdown timer 😁
@@jacksdjfam Not a good idea to carry several road flares in there with the lettering scrubbed off either.
That is a remarkable kit - the CROW Pi!
CROW! That was an awesome review on the tech AND CrowPi! I'm even more intrigued!
This wasn't a YT video it was an infomercial.
Infomercials wouldn't mention its negatives which he does (the inconsistent manuals, the hard to remove SD card).
Looks like they plan to make a RPi4 version of it, so it might be worth waiting for. Unless they drop the price on this model to make room for the 4's, of course.
Good news🎉, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL✨, let's learn more from my channel⚡
Radio Shack used to sell something similar just for electronics. I think it was called 150 in 1 Electronics kit. This is much more modern.
I had a 200 in 1 Kit back in the 80s like that; I still remember the CdS cell it had.
Pretty cool actually. 300$ a little pricy. I can do a custom version with a small pelican case though. Ok. It is really really cool. Wouldn’t need all the I/O stuff. Dam. Now I want one.
Would need an external flash drive though. It has everything else, why not that?
Legends say they also give an space shuttle and space station with this kit
I really like it would love to get one not only for me but for my children to. Thank you for your tutorial. 😁
Pretty much senseless, all the components are soldered so you can't seriously work and experiment with them, complete waste of money, except of the Raspberry Pi everything else cost like one dollar per piece, most things even ways less, don't know how he came to over 260 dollars, except of that he makes hidden advertisement.
You need a standard briefcase to make it truly portable. And have a place for all the extra stuff.
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my homepage
$240? I built a similar all-in-one raspberry laptop for about the same cost using a pelican gun case. Except for I used a 2k 10” display and a decent sized usb power bank to power the whole thing wirelessly. I built it to game using steam link and Parsec.
Okay smart guy, you win, you did not even need instructions, you are a real man, but why do yo need a special gun to hunt Pelicans...
All thatwasted boarder around the screen should fill the entire lid for the price its a mint pi with few extras
Customs officer:"excuse me sir but what is the purpose of this device"?
"Device responds: *8* *7* *6* *5* *4* *3* *2*..... 🤯🤯🤯
Then what, the vibrator motor fires up?
Just tell them it's a laptop
Interesting... you have to open a hole in the CrowPi case to get Micro SD access... Good review, your brothers says hello here in Isla de Pascua.
Schools need to get on this , great value
It's a fancy glamerous purse. The hardware is jammed too close for comfort. It is a good starter learning kit.
My question.....does ethan hunt have one?!
Come on. If you put an individual price on all components you have ended up buying an expensive case. And why?
Well good man, ya sold me on the CrowPi.
I was looking to buy that very same thing but was hesitant you to the prize and I didn't want spend that kind money on something I might be junk especially since I have all the parts you more or less do it myself but after this I think I may actually buy it
I understand this is pretty much the best thing on the market right now, but the biggest barrier to entry for most people is the price tag, IDK why all of these kids are so expensive. If you're willing to solder the price goes down so much.
Imagine pulling that out at a school. That just strait up looks like a bomb that need a few buttons to be pressed so,it can go boom
Crow. Yes I was planning on building something similar to this as a portable game box I'll have to seriously look into this for that project.
CROW...seems great as a teaching tool. I will puchase and teach a few kids with it.
Yeah i got the "sir step away from the case" type of scenario
Great video, the pace was prefect, I wish they had something like this when I started.
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel✨👏
I just purchased the CrowPi to mess around with it. As an experienced hardware and software designer for casino games, the big thing that’s missing for me is access to the address and data bus.
Spuds like a list of gadgets ya can win in the gadget show lol
I just started in arduino and need to move into the raspberry pi. looks very nice just dont know if i can get over that price tag. but that case makes it very tempting
Thanks for the video! I've been waiting for something just like this. Still... I wonder why they choose such a small display. The case could clearly hold something a bit larger. It reminds me of a PowerBook. LOL.. I had considered building something like this with a pelican case. I wonder how it would hold up to a kid walking home after school in the rain?
Good news🎉, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL✨, let's learn more from my channel⚡
crowpi
Crow Pi is cool, I want one to start learning some things that are fun.
Mr. President, please press the red crowPi button in 3..2..1..
Good luck getting through the xray machine
Thanks extremely handy. Will certainly share content with my good friends.
intresting, thank you for the CROW overview !
I'd love to know what one could do with it, apart from playing games or whatever.
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel
CROW - Great kit for education.
crow wonderful presentation
I don't think I would recommend buying a starter key with everything already wired up on a single board if you want to learn programming and electronics. I recommend learning to program on a PC then learning the electronics with a "bag of parts" kit. With everything already wired up, you don't really learn how to build circuits. Building circuits is the foundation of electronics. Also, you need to be able to place your peripherals where you need them. E.g. The acoustic ranger on this thing is always pointed at your face.
The Crow Pi would make a great cloud gaming machine. Plus the added stuff would give it a lot of functionality!
Good news🎉, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL✨, let's learn more from my channel⚡
Thanks for the review of the CROW PI; I haven't ever seen anything like it before...
It and others have been around for a while and have been promoted on youtube like this. I think eevblog even had one a couple of years ago.
@@davidfrisken1617 interesting idea. I can see it being useful for teaching or experimenting. it would be fun to see something raspberry pi based like this show up in a movie as the evil villain's briefcase master control device...
This thing is totally awsome! Thanks!
Always nice to hear a Northern accent on here me mate
This great kit for learning and exploring the functions and ability of the pi - crow
Yeah but so expensive.
Just to be clear, commenting here is not how you enter the giveaway. You need to click through and put that into the giveaway widget on the review article.
Is it TSA approved? This will definitely stop you at an airport screening line! Not knowing what it is?
TOTALLY COOL, I wish I needed one...
I like people that ask themselves if they need things 💚
Damn, if the Radio Shack Science Fair 200 in 1 Project Kit I had as a kid back in the 80s had wheels it would be a wagon....
Crow.... would love this for my grandkids
The crow -pi looks very cool i will look in to it thx u for thr video
Why not buy a rpi before seeing this? That is crazy considering how expensive this is, and how much cheaper just buying the sensors alone would be.
Not quite as portable as it is made out to be. You need a 2nd case just for all the other stuff it came with. Still, looks pretty good for that price. Good for learning coding.
I liked and subscribed because of Chrono Trigger. Good choice.
How about comparing the prices to Aliexpress instead of Amazon? How does it compare then?
This reminds me of one of those electronics kits when i was 12 only this one is a fully "functional" computer lol
Ah, the ones with the little springs you would clip wires into, and somehow you ended up with a radio picking up random signals from France. Those were the days. ;)
They Need this..
I have looked at this one eBay and other sites. Pretty cool, but it doesn't allow for expansion boards which is a large part of it so you're limited to only the 8 or so thing I comes with. I can put together a better kit along with expansion boards for less money but I know nothing of programming and little of circuitry.
Nice video, I world love to be back making and designing things, it's been busy days these late years
Crow would love one of these bad boys!
Good product i am looking for it , before to see a price of it . But idea is good . thx
Someone from @HackADay needs to make a version of this with the proper Official touchscreen, Dangerous Prototypes' hardware instead of tinkertoys, SDR, solars and a battery.
Good Video
Dude Breath a little what's going on did somebody pushed the button on reading aloud specifications
Best portalble hacking rig ever
I love the product as mutch as discribed. Coulnt tell it any better
This is so coooooool!!!!! I might save up for this
Hope they make something similar for the LattePanda Alpha.
When it dies it comes back for revenge.
I feel like if I asked my dad to buy this for my birthday, he'd be put on an FBI list with what it looks like...
Good tool and video. Thanks.
Thanks brother! My daughter is 6 she turns 7 july 22 im thinking this is perfect
There's actually a CrowPi 2 being kickstarter now, though I don't think it would be delivered in time :( www.makeuseof.com/tag/crowpi-2-raspberry-pi-laptop-launch/
oooooh!!! chrono trigger ! the first game i played on my pi !
CROW Hoping to get these into a STEM classroom!
Great review. What are the names of the games demonstrated?
$350 for that ? pass...how do you think this is even remotely what any user needs? look more like a classroom /education thing. having that many integrated sensors defeated the purpose of the pi. the trim on that case had better be white gold. otherwise the parts breakdown makes this a massive ripoff.
CROW. Been think about a little for different projects.
What racing game was you playing on this video.....it looked a bit much for a 3b+ but I'm putting together a adventure pi style portable pi 4 gaming box just for camping trips/my Xmas gift to myself lol
this kit is amazing
Good News🎉, thanks for your interest🧡, the third generation #CrowPi Raspberry Pi computer series from Elecrow is coming, that is #CrowPiL, 👏let's learn more from my channel⚡
Yeah, I saw you plugging..😎
Did anyone notice the guy breaking dirt blocks with a diamond sword?
it's a nice kit, but you could buy all this seperately and have someone 3D print an enclosure, and save about 60$
and i honestly don't know any makers who would buy components from amazon :P
That sounds like more than $60 of effort to me!
CROW. Wow that may be a great starter kit!
Just to be clear, commenting here is not how you enter the giveaway. You need to click through and put that into the giveaway widget on the review article.
Expensive and personally part of the pi is doing solder8ng and breadboards also. Having all those sensors in a case limits their actual use. Idea is cool but not cool at their price many of those parts can be bought in a huge kits for like 60 bucks.
What kit do you recommend?
is it to late to enter the competition/ giveaway lol??? just got my hands on on a pi and would love this!
A couple of years too late, yes. Sorry!
It looks like a better kit than the pitop for about the same price.
Is it raspberry pi 3 plus ?
Crow. Looks really cool.
CROW - I would love to learn on one of these
So many sensors, are you sure there is no radiation sensor stuck in there too?
A good crow review ;-))