Not only is the ingenuity and craftsmanship absolutely impressive, but the quality of the video production is simply outstanding. Clear views, good angles, step by step demonstration and simple. Even includes the list of tools and materials used, as well as jig build plans. IMHO, the absolute best of its kind on RUclips. Thank you, Yasuhiro TV.
You remind me of my grandfather, his abilities utilizing wood was something else and what I ultimately strive for, but this is a type of genius lost on me. So, thank you for these invaluable videos. You’ve instantly become my favorite RUclips channel
My top two tips for anyone struggling with their circular saw game: 1) A good blade is a true game changer. The expensive ones are worth their price. The best one in my opinion is Makita Efficut Z-56. Day and night difference compared to the cheap ones or even the mid priced ones. They're around 40-50 a piece. Goes through wood effortlessly and with low noise and vibrations like hot knife through butter and the finish is super satisfying. After several years of using the cheaper discs, I got a good one from a friend and there's no going back anymore. Even the battery life you get compared to a cheaper one is like 10x, especially when making long rip cuts. 2) Check and correct the squareness of your blade vs. the base. You need to do this periodically. If it's off just by a little, your joints won't match. If it keeps drifting too often, you need to renew the loctite in the small adjustment screw you use to square it.
nice tips! i am using the makita blade that came with my dhs680z, but not sure if that's any good. on number 2), i actually realized on my last cuts that they were not square but didn't realize the saw had an adjustment screw for that. will check for that asap :)
@@Bowl1992 It's been a while since I got mine, but I think it may come with several different ones depending on the package or where you buy from. The best in my opinion is the one that has the big SPECIALIZED text on it. They're around 40-60 usd/eur for one. It's so satisfying after years of using worn or mediocre blades. The adjustment screw is the one under the tilt-angle lever. There's another one for setting the maximum tilt, I set mine to 0 and 45 and ignore the numbers on the dial. You need a small hex key for it.
Thanks so much man:) tried to adjust it yesterday and hoping to get better cuts now! Though I found adjusting a bit tricky with the saw on my lap , holding the blade protection back, checking with the right angle and adjusting the screws at the same time:)
You make it look so beautiful! I could not even watch the whole thing. I had to stop and save it and then come back for more later after I fortified myself a bit. But up until the halfway point what I did see was truly beautiful and thank you so much for sharing it!
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Not only is the ingenuity and craftsmanship absolutely impressive, but the quality of the video production is simply outstanding. Clear views, good angles, step by step demonstration and simple. Even includes the list of tools and materials used, as well as jig build plans. IMHO, the absolute best of its kind on RUclips. Thank you, Yasuhiro TV.
This is the best Jig for a Circular Saw on RUclips for the last Years
I instantly fell in love with the castle joint jig. So simple, yet so powerful! Thanks a lot!
What I really enjoy is the accuracy of what you do. Actions speak louder than words.
You remind me of my grandfather, his abilities utilizing wood was something else and what I ultimately strive for, but this is a type of genius lost on me. So, thank you for these invaluable videos. You’ve instantly become my favorite RUclips channel
Clear idea, minimalistic design and perfect execution.
My top two tips for anyone struggling with their circular saw game:
1) A good blade is a true game changer. The expensive ones are worth their price. The best one in my opinion is Makita Efficut Z-56. Day and night difference compared to the cheap ones or even the mid priced ones. They're around 40-50 a piece. Goes through wood effortlessly and with low noise and vibrations like hot knife through butter and the finish is super satisfying. After several years of using the cheaper discs, I got a good one from a friend and there's no going back anymore. Even the battery life you get compared to a cheaper one is like 10x, especially when making long rip cuts.
2) Check and correct the squareness of your blade vs. the base. You need to do this periodically. If it's off just by a little, your joints won't match. If it keeps drifting too often, you need to renew the loctite in the small adjustment screw you use to square it.
nice tips! i am using the makita blade that came with my dhs680z, but not sure if that's any good. on number 2), i actually realized on my last cuts that they were not square but didn't realize the saw had an adjustment screw for that. will check for that asap :)
@@Bowl1992 It's been a while since I got mine, but I think it may come with several different ones depending on the package or where you buy from. The best in my opinion is the one that has the big SPECIALIZED text on it. They're around 40-60 usd/eur for one. It's so satisfying after years of using worn or mediocre blades. The adjustment screw is the one under the tilt-angle lever. There's another one for setting the maximum tilt, I set mine to 0 and 45 and ignore the numbers on the dial. You need a small hex key for it.
Thanks so much man:) tried to adjust it yesterday and hoping to get better cuts now!
Though I found adjusting a bit tricky with the saw on my lap , holding the blade protection back, checking with the right angle and adjusting the screws at the same time:)
i noticed with blades being a lot thinner rip cuts tend to drift easier if you hot a lot to do consider a wider blade…less flexing
Do you mean this one?
www.baustoffshop.de/pub/media/catalog/product/cache/24ebb395989c113f81840b0b8b7604cc/m/a/makita_b-57336_5.jpg
No bla bla - just perfection 😮 Thank you
You are a genius!
It is motivating.
Thank you very much.
@@YASUHIROTV where are you based? Near Tokyo?
Завораживающие Творчество - невозможно оторваться !!
So much with so little, very inspiring. All us without table saws have hope
Big shout out to the quality of the timber…. Looks a joy to work with….
Как всегда, оригинальные и полезные приспособления!
Я всегда очень рад их видеть.
Пожалуйста, продолжайте поддерживать нас.
I could watch these for days.
Thanks a lot. This video will save me from buying unnecessary tools. All i really need is a good saw blade and inspirations like this video.
You make it look so beautiful!
I could not even watch the whole thing. I had to stop and save it and then come back for more later after I fortified myself a bit.
But up until the halfway point what I did see was truly beautiful and thank you so much for sharing it!
Resterei a guardare i tuoi video tutto il giorno! Complimenti per la precisione e per l'ingegno!!
Всё по фен-шую,отличная съёмка и работа👍🔥🔥🔥
Полезные советы !👍👍👍👍👍
You have golden hands!
去年の12月から朝昼寝る前についつい見ちゃいます😊😊
かなり有意義な貴重な情報や知識そしてアイデアが凝縮されています。
これからも素晴らしい動画をよろしくお願いします✨✨
Could watch this all day. Thank you sifu.
Начал смотреть, и залип. Сохранил себе.
Твои уроки Лучшие! Ты Гуру! Удачи и Здоровья, Друг!
The ideas are always brilliant, thank you for the knowledge, keep sharing knowledge👍
Perfektní a dokonalé. Děkuji za nápad.
Komentáře a povzbuzení.
Děkuji.
Your work is amazing, congratulations!
I love chrome/polished foot on that saw. Awesome woodworking, too.
Спасибо Вам за Ваши видео! Очень много полезного и нужного 👍
Hyyy friend
Ich muss als Schreiner sagen das ist genial und perfekt! Auch wenn es etwas umständlich ist, ist es trotzdem sehr gut gemacht!
perfect geometry and workmanship!
Brilliant! I learned a stack. Thank you!
I’m always looking forward to new ways of preparing wood ❤❤
Perfect. Low Budget- for small workshops. Rebuilded several ideas. 😊
Спасибо! Очень познавательно и интересно. Простые вещи сделаны грамотно и аккуратно!
Castle joint is my favourite 😂 ❤
I think I saw some sawdust in one of the shots... Killer work man.
Absolutely beautiful work!
Great tips, tricks and jigs! Thank you for sharing
Замечательный ролик!
Нужные советы!
Подскажите модель циркулярной пилы?
Makita
Номер изделия HS631DZSB
Благодарим Вас за просмотр и поддержку.
You are a servant thank you sm!! Amazing
Thank you. That's very helpful. One thing missing for these tools is an attachment of some cheap laser guides. I hope to see one in the future.
毎回素晴らしい技術、アイデアに驚き、楽しませていただいてます！
Excellent. So many joints out of a simple circular saw and an easy to make guide jig. Bravo.
You make a amazing job)
I bought a circular saw with a blade on the left. now i regret need to change
That's one cool jig.
Thank you!
This guy is the skil saw whisperer!
Beautiful work
I am very happy.
Thank you for everything.
Мастер оч. хорошо знает геометрию и не только.
Молодец, Удачи в работе!)
ru
Excellent tips
Thank you very much.
I hope it will be of help to you.
I’m intrigued by your precise approach to the craft. ❤❤
You are definitly the best! ❤
Perfection.
Glad to hear it.
Thank you very much.
Really enjoying watching this.
木工接合フェチと言う言葉を創造しました（褒めてます！｝
So simple its unbelievable!
Amazing talent!
This is like meditation
Здорово! Так всё просто кажется, но начать страшно. Хорошо, что есть станок!
こんな方法があったとは、驚きです。
超精密加工ができますね。
真似させていただきます。
Most helpful idea's. Thank you.
That is Brilliant. Many Thanks
أنت مبدع جداً…أُحييك يا بطل 👍👍
You are a wizard👍🏻
9:13 завидую хватке пальцев с ударным эффектом 😂
すごい！ 尊敬します！！！ それにしてもお使いのツールの一つ一つにも興味津々です・・・。公開リストなど、ありますか？
Столяр с большой буквы!
thank you for your videos, I have decided to buy same tools you use :))
Я не знал ручной серкулярка на что способен спасибо за идею
I don’t know why I have watched it over 50 times
wow, absolutely fascinating to watch.
Очень понравилось, мастер. С уважением.
What kind of oil are you using? Beautiful work! And precision.....❤
Outstanding!
Obrigado por compartilhar muito bom seu trabalho 👏👏👏
Por apoiar minhas atividades e
Obrigado por apoiar minhas atividades.
Hypnotizing!!!!👍👍👍
Brilliant video. May i kindly ask what size is your saw? What model? Looks really light and great to use
Fantástico parabéns pelo seu trabalho 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
❤❤❤
ВОЛШЕБНИК !!!
tremenda y poderoso accesorio GRACIAS
SUPER , BRAVO !!!
Cuanta precisión tienes me gusta ver como lo haces
Me alegro de que te guste.
Tus palabras son un gran apoyo para mí.
Quelques bons trucs, félicitations pour vos bonnes idées
all i can say i DAMN . nice job.
E a gente sempre acha que sem uma serra de bancada não dá pra fazer cortes precisos. parabéns pelo conteúdo. Grande abraço aqui do Brasil!!!!!
Fantastic work due 🙂🙂
Outstanding Sir.
Super, i like it!
Vc é um gênio , são poucas pessoa que tem essa característica , parabéns very good fantastic thank.
Peralatan yang canggih dapat mempermudah pengerjaan .n hasilnya pasti bagus n presisi
You are the best🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😊
Wow, very nice, only wish i had the patience to make that work!
Beautiful! What wood you're using Yasuhiro? Thank you so much!
Amazing Amazing.!!!!!!!!!!!!!!
What model of circular saw is that? It sounds amazing
Subscriber earned, good job
Awesome 👍🏻
Amazing video
Love this. Got me some ideas how solve am build I'm planning with out buying new tools. 👍
Отличная работа👍
Very impressive.
Masterful.