I live in the United States and I stumbled across your channel inhave seen a ton of modders here but no one as gifted as you . I cannot express how much I love your work. You have to be one of thee most humble people I have ever watched. The amount of love you have for your family and work is truly inspiring. I tell alot of people to check you out and I will support your channel the best I can. Keep up the great work, its truly an honor to watch.
Yessssss ! You are right... Look at tools... There are no computerised CNC or laser cuts, but effects are stunning ! It is becouse of gifted man ... It is not necesarry to have a milion dollars workshop. AWESHOME ! It is a pleasure to watch his work. I am watching it whole afternoon and evening today.
This dude is insane. The craftsmanship is next to none. If I was to have someone build a PC for me. It would 100% be this guy and I've seen pretty much all the top builders on RUclips. This guy is insane. This guy could blow up if he got the right people to pay attention to him.
It's a beast of a build. Don't ask the question 'why?'...just know the answer is 'because you can'. There's not a case out there that Declassified can't turn in to a work of art. Who'd have thought you could fill this case and make it look like it was meant to be that way. Brilliant work DS.
Just do it man. Start small here and there. Put together parts lists for people, charge cost for the parts, ~$200-$300 for the actual build and then go from there. For something like this build you could charge easily $1,000+ just for building it.
Ok dude you have a serious problem. You have got to be one of the most incredible PC builder I have ever seen. Those cables would have drove anybody straight nuts. Great job on getting those straightened out. That tube layout was insane. I love your work. Thank you for showing your work. I do hope you get an invite to a CES event.
HA. Have you seen the Raijintek Enyo?!? supports up to 28 case fans :^) it can carry up to 140 mm Quad radiators and 2 140 mm triple radiators with room for 2 seperate pumps. And thats not accounting for a push-pull system.
While I can't speak for your daughter personally having my old man teach me how to operate the family farm equipment, service vehicles and fine tune robots in plant assembly lines were some of the proudest moments of my life. One thing I can say for sure is because I expressed interest in his passion me and him were able to bond better than almost any other father and son I've met to date and I sincerely hope you get the chance to experience those pleasantries. It's something I will cherish until the day my time comes.
Absolutely stunning. As is every one of your builds. I know the time and patience required to put together something like this as I have built my own systems from scratch. Many nights putting together the build in your head and tearing it down. Also all the problem solving required as well. There is no manual for this! Each one is a work of art. Thanks for sharing.
This is so sick! It is very obvious that you are detail oriented with how beautiful the final product comes out. You take your time on every piece, cutting no corners!
This is incredible in every way. overkill components, expert chassis modding, godlike cable management, and an absolutely gorgeous water cooling loop. Simply outstanding
Must be doing some extreme overclocking on that HDD. Next thing you know someone is going to release a watercooled keyboard or maybe even a watercooled mouse mat.
It just for the look since it dosent have any real effect same as the rgb water rams, would max be 1% better than copper plates when there's no pressure flow inside "She got the look ;)
Just stumbled upon your channel I have never seen someone will as much skill and finesse as you when comes to modding a PC you truly make this entire thing into a work of art
You are by far the best computer builder I've ever seen. It's a pleasure watching you work. With all the grace and the love that you put in your work shows in everything that you build. I wish I knew someone like you to teach me the way because I am totally impressed. Keep up the good work. Much love from Chicago Illinois to you and your family.
I've watched a lot of videos of fancy PCs being built but this one is just so over the top. This isn't just a custom PC, this is a work of art. Well done sir!
Thanks man also it would be a great help if you could vote me and this build on the builds,gg contest that i entered builds.gg/builds/titan-corsair-1000d-monster-build-5797 Lots of Big prizes for contestants and voters, too Thank you
@Declassified Systems wow what a great video, I have a similar build with pretty much the same parts your client ordered; just havent planned to do any water cooling yet. Super impressed with how you mod the chassis and managed to do all that cable management. Would be nice to share how you hid those cables so well. I personally think you should do some commentary as you're working on these monster builds. Great job fam!
I love how you take the time to measure the tubing to be level and square. I see so many pro builds that have tubing that's close, but no quite level or straight down it's maddening. Nice work!
In all your videos, what I love the most is your tubing. The layout and accuracy of you bends baffles me. Honestly, I would love to see how you do it. Cheers. And um...no beer this time? Lol
Absolutely incredible !!!!! Congratulations on the excellent service, it was beautiful too !!! Congratulations to a fan from Brazil, and new member on your channel!
Congratulations on your amazing work, I live in Brazil and it would never be possible to build a computer as magnificent as yours here. Your dedication, your care for details are impressive, just as there have been impressive artists in history, you join the same class with pieces, work and a lot of love in everything you did. May God bless your home, your ability and your work.
Insanely beautiful. This is not just a PC build. This is a work of art. Some next-level stuff! This man deserves more subs and more views. Kudos to you!
This is some amazing, artisan-level craftsmanship. Thank you for sharing this video - I've been in the IT field for over 20 years and I've never quite dreamt of anything like this, much less seen it in real life. Phenomenal.
Watched more than 20 of your videos and subscribed since the first one but just realized that you only had 50k subs. 😤 What up with that. You definitely deserve much more than that. Your level of craftsmanship is beyond amazing. Kudos to you man. Btw what an awesome daughter you have. Passion from such a young age is so beautiful.
I mean the cable management and the water cooling fitting is amazing And this pc looks like it can take on some max graphic setting shit Seems promising
I had a dream that I was in Singapore waiting for a delivery. Then I woke up and heard the postman knocking at my window saying he's got a parcel for me. Finally my CPU thermal paste is here ! I'm going back to sleep !!
Your attention to detail is incredible. The quality is what I would expect from a manufacturer. You deserve so many more subs! I'm sure they're coming..
Draw it out before hand. It’s all in the planning. I would never have been able to do some of my builds without EXTENSIVE prep,plans, and a drawing. He might be able to do it on the fly but for most. Draw.
You can work it out quite easily. You need to decide on your "CLR" center line radius. So choose a circle size measure its size from one side to the other, This is your diameter. Next divide your diameter by 2 and then times it by π 3.14. This is your circumference of the circle you choose. 90 degree bend is 1/4 of a circle so... divide your result by 4. Mark your pipe where you need the bend to start and then make another mark being your value. Bend distance is =((Diameter/2)*π)/(360/Degrees)
@@sickphukka384 oh is that all? I assumed it was just taking the center nebuli and rerouting the inner circumference by a 3+1-dimensional pseudo-Riemannian manifold with tensor fields obeying partial differential equation of the tubing, then using a biomagnetic sphere to divide the remainder by using fields on R4 while obeying certain Lorentz-invariant partial differential equations and commutation relationships, acting on an abstract Hilbert space. your way is better though.
I am from India.... Have seen alot of PC builds n Mods... but never saw any build like this one.... cutting, grinding, painting , acrylic sheets, all in one... Good Job... Would contact you in near future for one of mine.
@@DeclassifiedSystems thx for your reply, they sadly didnt appear in my inbox even with the bell ringed. haha. gonna watch them soon. what about some custom itx builds with like 200mm diameter radiators (thinking about one with 2 200mm noctua and if it might be possible)
Wow! The amount of knowledge, planning, skill, and most importantly HARD WORK that went into this is truly staggering! If that is not enough, you went out of your way to make a video for all of us! I love to see your family helping you, you can see they are also passionate and hard-working. It's funny how you can make someone who just built *HIS* dream PC truly jealous! I would love to support you and have you build me a system one day. Until then, only in my dreams. :) I wish you and your family the best of luck in everything that you do. Have a great day!
Computers in old days : larger that your room Computers in 1998 to 2013 : they getting smaller Computer in 2020 : ok we are back to our old format but with better performances xD
Super awesome build as alway, that case is *thicc* (wide) ! And 75 kilo's, that's heavier then me! I did find the rust on the case quite shocking, didn't expect that. That replacement panel you made out of acrylic looks great. That cable management is amazing, I'd take me days to manage those and it'd still look like crap. Your daughter(s) building pc's when they grow up would be awesome too, carry on your legacy :D That's also part of the reason I like power hungry components. Image if all components were super power efficient, watercooling wouldn't be a thing. I'm also quite interested in that reservoir, you said it served a cooling function to, how does that work? What's the airflow in the case? Front in and top and rear out? Sorry for the long message :D One last question, I want to open up my gpu to replace the thermalpaste and get rid of some dust but I have one question/problem: If I take apart the gpu do I have to replace the therpads to? Because they'll get undone if I take my gpu apart. Where do I find replacement thermalpads. I'm guessing they should be the excact same thickness as the ones that came stock but how do I find out how thick these are? I have an evga gtx 970 sc acx 2.0
It's fine the x2 480 rads pushes air inside the case and x2 360 on top push outwards, you can reuse the thermal pads I am just not sure where to buy it if you prefer to replace it.
اینو از فروشگاه scan سفارش دادم برام بیارن خیلی کیس عالیه مخصوصا برای گیم تکنولوژی واقعا پیشرفته ای داره و مهندسی ساخته شده ک حرفی برای گفتن نمیزاره در یک کلام عالی از همه نظر 😮😀
@@KristalBlut why wouldn't you if money is no object? also I hate the sound of HDDs in a silent system, so SSDs would be quieter also I think SSDs are more robust
Absolutely stunning. I as well just stumbled across your channel and you by far are one of the best that I have seen. Looking forward to seeing more content and learning. Thank you!
Another work of art man! You really inspire people to undertake such projects. I wonder where you got the 1000D and more importantly where you got the additional radiator trays, for they seem to be impossible to buy. Keep up the great work with your family!
Theoretically speaking, if someone was to theoretically add up the cost of this build, Theoretically speaking of course, what would be the Theoretical total. That is of course just Theoretical and completely fictional, so I will just back to my hidy hole and pretend I never asked as I cry that no one responded. That is all Theoretically speaking (except the last part)
That build is amazing and it shows you are really doing what you love and for that im subscribing especially since this is the first of your videos ive seen. to be honest im jelly of that build its so clean and the tubing is as accurate as possible as well as seeing the amount of time gone into this build its freaking sweet man do what you love and god luck on future builds! =)
Unreal build man. The craftsmanship in designing this from the ground up... I’m in awe. I really want to know how you plan your loop and measure your bends. I built my first custom loop last year and several discarded tubes later got it looking pretty good. Whole time I thought there must be something I’m missing... must be a better way.
I live in the United States and I stumbled across your channel inhave seen a ton of modders here but no one as gifted as you . I cannot express how much I love your work. You have to be one of thee most humble people I have ever watched. The amount of love you have for your family and work is truly inspiring. I tell alot of people to check you out and I will support your channel the best I can. Keep up the great work, its truly an honor to watch.
Thank you so much I really appreciate it, best wishes to you and your family.
@@DeclassifiedSystems Im in the United States too. I had to remind myself to close my mouth while watching this. = Sub
Yessssss ! You are right... Look at tools... There are no computerised CNC or laser cuts, but effects are stunning ! It is becouse of gifted man ... It is not necesarry to have a milion dollars workshop. AWESHOME ! It is a pleasure to watch his work. I am watching it whole afternoon and evening today.
Why? because The right man in the right place he loves what he's doing! :)
Greetings all the way from Chicago IL. Amazing projects! Would like to get s quote on a build if possible : )
Hand down the best work I've ever seen! The love for your family is touching! Such great work!!!!
Damn, all those cable... but you sorted it out, im impressed.
I would have just tied a noose with those cables and spared myself the pain of managing them.
This dude is insane. The craftsmanship is next to none. If I was to have someone build a PC for me. It would 100% be this guy and I've seen pretty much all the top builders on RUclips. This guy is insane. This guy could blow up if he got the right people to pay attention to him.
It's a beast of a build. Don't ask the question 'why?'...just know the answer is 'because you can'. There's not a case out there that Declassified can't turn in to a work of art. Who'd have thought you could fill this case and make it look like it was meant to be that way. Brilliant work DS.
Thank you sir.
@@DeclassifiedSystems Welcome. Credit where it's due. I love your systems.
'why?'
All of your build is amazing and by this point watching it has been kind of a therapy for me.
Thanks
@@DeclassifiedSystemsYou're welcome man.
This man has my dream job, beautiful job. An artist.
Thank you
Just do it man. Start small here and there. Put together parts lists for people, charge cost for the parts, ~$200-$300 for the actual build and then go from there. For something like this build you could charge easily $1,000+ just for building it.
Ok dude you have a serious problem. You have got to be one of the most incredible PC builder I have ever seen. Those cables would have drove anybody straight nuts. Great job on getting those straightened out. That tube layout was insane. I love your work. Thank you for showing your work. I do hope you get an invite to a CES event.
Declassified Systems: - "How many fans do you need?"
Customer: - "Yes"
HA. Have you seen the Raijintek Enyo?!? supports up to 28 case fans :^) it can carry up to 140 mm Quad radiators and 2 140 mm triple radiators with room for 2 seperate pumps. And thats not accounting for a push-pull system.
HOW MANY FANS WOULD YOU LIKE ?
The legend of electricity bill
Custome: I'm not really a fan of fans, just put around 100s
1 billon fan :)
Dude all of your builds are super clean and there's is not a single thing I disagree with in any of them in. Keep up the great work!
Thank you Cheers!
While I can't speak for your daughter personally having my old man teach me how to operate the family farm equipment, service vehicles and fine tune robots in plant assembly lines were some of the proudest moments of my life. One thing I can say for sure is because I expressed interest in his passion me and him were able to bond better than almost any other father and son I've met to date and I sincerely hope you get the chance to experience those pleasantries. It's something I will cherish until the day my time comes.
Absolutely stunning. As is every one of your builds. I know the time and patience required to put together something like this as I have built my own systems from scratch. Many nights putting together the build in your head and tearing it down. Also all the problem solving required as well. There is no manual for this! Each one is a work of art. Thanks for sharing.
I am pretty much speechless after watching any of your videos. This is great. So much inspiration and perspiration. Haha! You, Sir, are an artist!
This is so sick! It is very obvious that you are detail oriented with how beautiful the final product comes out. You take your time on every piece, cutting no corners!
Thank you I am glad you like it cheers!
To build up this monster, you need to have:
1. Money
2. Professional skill
3. Most importantly, you have to be a good father.
1: money. 2: money 3: money xD
This is incredible in every way. overkill components, expert chassis modding, godlike cable management, and an absolutely gorgeous water cooling loop. Simply outstanding
I've never seen HDD Waterblocks before, It looks great.. but does it really matter? lol
Must be doing some extreme overclocking on that HDD. Next thing you know someone is going to release a watercooled keyboard or maybe even a watercooled mouse mat.
Hdd overclocked to spin at 11k rpm😂
What’s the point? Just the looks or what or am I stupid •_•
It just for the look since it dosent have any real effect same as the rgb water rams, would max be 1% better than copper plates when there's no pressure flow inside
"She got the look ;)
@@toba6919 I think it's just a gimmick, no real use.
Maybe if you have a really old hdd which run hot and place it somewhere with no airflow
Just stumbled upon your channel I have never seen someone will as much skill and finesse as you when comes to modding a PC you truly make this entire thing into a work of art
this was one of the greatest videos i’ve seen in a while, you’ve definitely earned yourself a sub from me
Thanks
You are by far the best computer builder I've ever seen. It's a pleasure watching you work. With all the grace and the love that you put in your work shows in everything that you build. I wish I knew someone like you to teach me the way because I am totally impressed. Keep up the good work. Much love from Chicago Illinois to you and your family.
Those bends man.............im speechless 😶
Thank you sir
I've watched a lot of videos of fancy PCs being built but this one is just so over the top. This isn't just a custom PC, this is a work of art. Well done sir!
Thank you
The MASTER does it again!!! Great job as usual!
Thank you
What an absolute masterpiece of hardware.
Props man this is hands down one of the most impressive builds I've seen done. Much luck to you!
Thanks man also it would be a great help if you could vote me and this build on the builds,gg contest that i entered builds.gg/builds/titan-corsair-1000d-monster-build-5797 Lots of Big prizes for contestants and voters, too Thank you
@@DeclassifiedSystems will do!
most crazy water-cooling pc build i have seen , keep it up
Thanks
Insane cable managment by the best pro-moder in the world.Keep up #respect_from_greece
This build is just insane! You are a pro at hiding cables aswell. Nice photo shoot at the start hehe 👍
This guy is the GOAT of pc building.Makes my OCD feel so good watching how perfectly lined up everything this guy does.
The amount of RGB fans inside and yet you don't see any cable management clutters is amazing..
This build is unbelievable, i takes a super human to manage all those cables, congrats! one of the Best modder out there!
@Declassified Systems wow what a great video, I have a similar build with pretty much the same parts your client ordered; just havent planned to do any water cooling yet. Super impressed with how you mod the chassis and managed to do all that cable management. Would be nice to share how you hid those cables so well. I personally think you should do some commentary as you're working on these monster builds. Great job fam!
Thank you sir i will try it in the future if it's possible for me.
I love how you take the time to measure the tubing to be level and square. I see so many pro builds that have tubing that's close, but no quite level or straight down it's maddening. Nice work!
Thank you
In all your videos, what I love the most is your tubing. The layout and accuracy of you bends baffles me. Honestly, I would love to see how you do it. Cheers. And um...no beer this time? Lol
Thanks you, I had a couple on this build but not as i use to as Haha lots of work
Absolutely incredible !!!!! Congratulations on the excellent service, it was beautiful too !!! Congratulations to a fan from Brazil, and new member on your channel!
Thank you.
Insane cables, how possible to sort it all out that perfectly.
i have that case ...it has a special sort of cabinet in which you can store all your cables
Amir Dilshad the one he cut out? 😂
Congratulations on your amazing work, I live in Brazil and it would never be possible to build a computer as magnificent as yours here. Your dedication, your care for details are impressive, just as there have been impressive artists in history, you join the same class with pieces, work and a lot of love in everything you did. May God bless your home, your ability and your work.
The 1000D is so massive! I also like the build of ITRaidDE very mutch!
Insanely beautiful. This is not just a PC build. This is a work of art. Some next-level stuff! This man deserves more subs and more views. Kudos to you!
This is the most insane build i have ever seen, i never thought i would see watercooled hard drives but here we are
This is some amazing, artisan-level craftsmanship. Thank you for sharing this video - I've been in the IT field for over 20 years and I've never quite dreamt of anything like this, much less seen it in real life. Phenomenal.
entry level gaming at it's finest
asasdfsgdfgfdhdfj
Entry level XD
Right cause a mid tier pc has RTX titans in 5 way sli, tripple i9 9900k and 128 gigs of g.skill royal rgb ram
Sorry. My bad. 256 gigs of ram
@@VENO5407 mid tier actually does
Wooosh
Watched more than 20 of your videos and subscribed since the first one but just realized that you only had 50k subs. 😤 What up with that. You definitely deserve much more than that. Your level of craftsmanship is beyond amazing. Kudos to you man.
Btw what an awesome daughter you have. Passion from such a young age is so beautiful.
I mean the cable management and the water cooling fitting is amazing
And this pc looks like it can take on some max graphic setting shit
Seems promising
Bro, you deserve soooo many more followers. You can tell in your workmanship how much of a passion this is for you. You're freaking amazing!!!
Thank you sir
I had a dream that I was in Singapore waiting for a delivery. Then I woke up and heard the postman knocking at my window saying he's got a parcel for me. Finally my CPU thermal paste is here ! I'm going back to sleep !!
haha
Unbelievable! Amazing craftsmanship and attention to detail far beyond others I have seen.
Best pc builder
Thank you sir
Subbed and liked, because i loved seeing your tiny daughter standing around patiently wanting to help her dad
Thank you
ik this ur passion as the result clean and perfect
You are incredibly talented! Please keep inspiring your daughter with these beautiful products, I'm sure she's proud of you
Truly insane pc. Love you work😘
Thanks
Your attention to detail is incredible. The quality is what I would expect from a manufacturer. You deserve so many more subs! I'm sure they're coming..
I want to see how you determine where to bend the tubing.
If he happens to eyeball it... then he must be doing it for years lol
He actually showed how in his previous videos.
Draw it out before hand. It’s all in the planning. I would never have been able to do some of my builds without EXTENSIVE prep,plans, and a drawing. He might be able to do it on the fly but for most. Draw.
You can work it out quite easily. You need to decide on your "CLR" center line radius. So choose a circle size measure its size from one side to the other, This is your diameter. Next divide your diameter by 2 and then times it by π 3.14. This is your circumference of the circle you choose. 90 degree bend is 1/4 of a circle so... divide your result by 4. Mark your pipe where you need the bend to start and then make another mark being your value. Bend distance is =((Diameter/2)*π)/(360/Degrees)
@@sickphukka384 oh is that all? I assumed it was just taking the center nebuli and rerouting the inner circumference by a 3+1-dimensional pseudo-Riemannian manifold with tensor fields obeying partial differential equation of the tubing, then using a biomagnetic sphere to divide the remainder by using fields on R4 while obeying certain Lorentz-invariant partial differential equations and commutation relationships, acting on an abstract Hilbert space. your way is better though.
First off your an artist just every build you do is clean. Second as a 1000d owner you have me terrified of rust now >.
That's a flipping impressive build. Nicely done. I personally am scared of a water cooled PC.
I am from India.... Have seen alot of PC builds n Mods... but never saw any build like this one.... cutting, grinding, painting , acrylic sheets, all in one... Good Job... Would contact you in near future for one of mine.
Thank you looking forward to it sir
!!!! ANOTHER CLASSIC !!!!
Thanks
This is definitely one of the cleanest looking rigs I've ever seen in my life. Just wonderful. Thank you for sharing this.
Were did the cables go??? I need that cable management vid
Seems like he did a mod to hide it under those two blocks at the back. Amazing😍😍
You, my friend, are an artist! Amazing work ... I hope the client loved it!
Thank you yeah he did it's my 2nd time making a build for this client of mine from Singapore for sure it wont be the last.
Watch his kid just casually looking at those 6 Titan XP cards and be like: Meh, seen better stuff
@@СимеонЧобарски Balgarin?
This goes beyond simple custom PC building, this is art. Very good job......PS: The blue UV coolant would look great into that :)
Massive cable nightmare. But you made them disappear!
idol tlaga kita sir. the precision and alignment of every parts, cables and lalo na nung mga tubes. super aligned po talaga. isa kang halimaw sir hehe
Thank you
So nice beatifull i think you have magic in your hands
Thank you
Well come bro
i wants
I love how you just rip the entire case apart and design a MUCH better version lol. Takes pc building to another level. Fantastic work man!
Thank you
People:there is no point that you know that your too rich
Me:watercool... EVRERYTHING
You need a plunge router for that acrylic my friend! It would probably help with cleaner cuts. I love the way you fully mod all the cases. Great work!
Thanks
I would love to see AMD Ryzen Builds from you. Any chance?
i think he work on demand , if someone ask for it he build it
I had worked on a couple sir build #36,#38,#39 and build #43 you can check it out on my video list on my channel sir
funmovieproduction why the hell would anyone watercool ryzen
@@DeclassifiedSystems thx for your reply, they sadly didnt appear in my inbox even with the bell ringed. haha. gonna watch them soon. what about some custom itx builds with like 200mm diameter radiators (thinking about one with 2 200mm noctua and if it might be possible)
@@MrKZdemos because they can!
Wow! The amount of knowledge, planning, skill, and most importantly HARD WORK that went into this is truly staggering! If that is not enough, you went out of your way to make a video for all of us! I love to see your family helping you, you can see they are also passionate and hard-working. It's funny how you can make someone who just built *HIS* dream PC truly jealous! I would love to support you and have you build me a system one day. Until then, only in my dreams. :) I wish you and your family the best of luck in everything that you do. Have a great day!
Computers in old days : larger that your room
Computers in 1998 to 2013 : they getting smaller
Computer in 2020 : ok we are back to our old format but with better performances xD
Man, you are simply the BEST modder. I wish one day I could afford your custom build like this masterpiece...
Thanks and looking forward to that.
Super awesome build as alway, that case is *thicc* (wide) !
And 75 kilo's, that's heavier then me!
I did find the rust on the case quite shocking, didn't expect that.
That replacement panel you made out of acrylic looks great.
That cable management is amazing, I'd take me days to manage those and it'd still look like crap.
Your daughter(s) building pc's when they grow up would be awesome too, carry on your legacy :D
That's also part of the reason I like power hungry components. Image if all components were super power efficient, watercooling wouldn't be a thing.
I'm also quite interested in that reservoir, you said it served a cooling function to, how does that work?
What's the airflow in the case?
Front in and top and rear out?
Sorry for the long message :D
One last question,
I want to open up my gpu to replace the thermalpaste and get rid of some dust but I have one question/problem:
If I take apart the gpu do I have to replace the therpads to? Because they'll get undone if I take my gpu apart. Where do I find replacement thermalpads. I'm guessing they should be the excact same thickness as the ones that came stock but how do I find out how thick these are?
I have an evga gtx 970 sc acx 2.0
It's fine the x2 480 rads pushes air inside the case and x2 360 on top push outwards, you can reuse the thermal pads I am just not sure where to buy it if you prefer to replace it.
rust on a 500 quid case wtf
Declassified Systems okay, thanks for the reply :)
Four years later this is still one of the best builds I've seen. 2023.
Thank you
You are insane man, I love all your builds :-)
Such incredible precision there, nothing even 1mm out of place.
Wer würde nicht gerne so ein monster besitzen....?
Vorlost Zurab Ich. Ist einfach viel zu heavy. Wiegt fast so viel wie ich lul
i dont ussualy write comments but you sir have done an amazing job and you have show so much devotion to something you enjoy, bless you
If you all would knew that 1 year later the RTX 3080 is destroying everything xD
Outstanding work, skill and passion, it was a pleasure to watch and enjoy. The best of the best, cheers Kev
15:37 brain fart , 15:57 brain is melting , 16:47 brain as error 404
Hahaha
Imagine if the verge was left to do the cable management, it's too terrible to even contemplate.
Wow one of the best build and builder i have ever seen! Nice work sir!
5:15 damnn if im gonna have a kid like that im also gonna get him/her into pc building :>
اینو از فروشگاه scan سفارش دادم برام بیارن خیلی کیس عالیه مخصوصا برای گیم تکنولوژی واقعا پیشرفته ای داره و مهندسی ساخته شده ک حرفی برای گفتن نمیزاره در یک کلام عالی از همه نظر 😮😀
The real question is: Why does this PC still have HDDs?
Data redundancy
why would you store movies and music on an SSD?
@@KristalBlut why wouldn't you if money is no object?
also I hate the sound of HDDs in a silent system, so SSDs would be quieter
also I think SSDs are more robust
@@user-bj3pq2si2l this computer is probably not getting moved anymore
@@arvinolteng3201 yes, it will get shipped
That cable management is absolutely next level!
Dat cable mess....
*When your mom tells you to clean your room*
''I don't even know where to start...''
The best pc i ever scene in my life. I hope soon i can build mu dream pc like this.subrang lakas to pang gaming dalawa yung grapics card. Nice Video
*D A M N. Where are all the cables? TENGO MIEDO.*
Absolutely stunning. I as well just stumbled across your channel and you by far are one of the best that I have seen. Looking forward to seeing more content and learning. Thank you!
Thank you
I just got you to 50000 subs!
just an absurd build and the message at the end very wholesome. New sub sir
6:49 I opened Fortnite and the loading screen appeared exactly when the beat dropped
wow that's so interesting
Another work of art man! You really inspire people to undertake such projects. I wonder where you got the 1000D and more importantly where you got the additional radiator trays, for they seem to be impossible to buy. Keep up the great work with your family!
Theoretically speaking, if someone was to theoretically add up the cost of this build, Theoretically speaking of course, what would be the Theoretical total. That is of course just Theoretical and completely fictional, so I will just back to my hidy hole and pretend I never asked as I cry that no one responded. That is all Theoretically speaking (except the last part)
Haha Theoretically speaking around 10,000+ usd.
@@DeclassifiedSystems 10k without the parts or everything?
Its good to see what the end result was gonna be at the start of the video. Cus all that cutting in this amazing case gives me chills all over..
Can this run csgo at 30 fps 720p all low?
Never.
@@akux5588 oh ok
@@bananaking8388 ofc it can stupid its a powerful pc .... csgo needs just 4 gb of ram ...dumb
@@user-gm8dk1sp1f r/wooosh
i was waitng for that tbh xd
That build is amazing and it shows you are really doing what you love and for that im subscribing especially since this is the first of your videos ive seen.
to be honest im jelly of that build its so clean and the tubing is as accurate as possible as well as seeing the amount of time gone into this build its freaking sweet man do what you love and god luck on future builds! =)
Thank you and best wishes to you and your family Cheers!
That is some sick build, water cooling not just in front, but in a back too, like I said SICK, keep doing what you doing
Unreal build man. The craftsmanship in designing this from the ground up... I’m in awe. I really want to know how you plan your loop and measure your bends. I built my first custom loop last year and several discarded tubes later got it looking pretty good. Whole time I thought there must be something I’m missing... must be a better way.