Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
OMG I JUST REALIZED YOU GUYS ARE FROM VA!!!!! I'll be in contact with you soon to build me either a van or to fit my truck for mobile detailing. You have no idea how much stress this just took off my shoulders. Idk why I thought you guys were in CA
Very few people like to build their own setup... very few people are capable of building a proper setup.. BUT ..... Many people like to buy rather than DIY... i think if you stick at it you will be successful here ...
I have a video on how to do it in my channel that you can look for it and also I sale them if you want it here www.raldasdetails.com/product/6ft-30-amp-extension-cord-box/
@@RaldasDetails Ok cool! Also how well does that water pump work? I’m looking at putting a slim 110gal water tank in my truck bed but can’t decide how big of water pump to get with. I would assume something like a 2.0 to 2.2gmp would work just fine?
BROTHER!!! THIS IS AMAZING!!!! So skilled and precise - the owner should feel incredibly lucky. What is the small black hose reel for by the generator?
What a magnificent setup, amazing. Question I'm currently in the process of setting mine up. I'm using a gasoline powered pressure washer. Do I need to install a pump as well or will I have enough pressure without it?
Super nice Toni!! I spent yesterday nearly crying thinking of my set up here in Helsinki! There is no Toni or Raldo’s detailing here so no one to advise me of the set up. I was looking at your setups but all products are from US so not so easy to find similar here in EU. Anyway the extra part you had which I did not think about was the pump. What output is that?
hey tony do you have a video on how to secure your water to the chasis of your vehicle? also when it comes to starting your detail setup do you first 1.) Get the dimensions of your vehicle 2.)weld together and build the frame and then secure that 3.) then add your equipment and secure that as well Has your plumbing for your water tank changed or improved since your original setup and when you run your 30 amp kit to your generator along with your wireless remote, do you also run an extension off of that and lastly, did you drill a hole for a return valve for you pump so it doesnt overheat
Hi Tony. Awesome set up! I would love to have this set up, too bad I am 2k miles away from you. I am curious. What are the measurements for the low profile water tank?
Nice job Tony looks great .. what are those hooks called that you use to bolt down the water tank? I just want to do that for my 100gal tank to 3/4in plywood inside my express van. I don’t want to risk anything by drilling into the actual van floor. Thanks in advance Tony 👍🏽
@@RaldasDetails ok thank you 🙏🏼 one more question if you don’t mind but would you happen to know what kind of black paint would be best for me to paint my plywood floor in my detail setup? Thanks again Tony have a blessed day
I’m glad I got a truck Now. I have one question though, Tony if the client would’ve had a 65 Gallon tank instead of the 35 would it still be enough space for all equipment? Or maybe there would be No space for the Compressor 🤔
What did you put before the seaflo pump? I’m having issues with back pressure and water spraying everywhere when I release the trigger. I installed a check valve between the pump outlet and pressure washer inlet and after a few weeks the hose there finally popped. Not sure if it’s old hose or what, but any recommendations on how to do a proper pump and pressure washer setup would be awesome!
I really liked your setup, I have a question: is the water pump always on? or do you only use it to start the kranzle? I have one for my pressure washer but I use it when I don't have enough gravity from the tank.
@11:06 what do you mean by the not having to worry about the water in the line because of the pump, and when should you have to put another line back into the water tank so that way you can keep recycling the water so the pump doesn’t die..
In this case for example wend you want to fuel up a bucket 🪣 you can easy lose prime in the pressure washer, because you need to open the valve to do it, so the pump will push water back to the pressure washer that is y I said we don’t have to worry, so the kranzle is not going to work hard to suck water. You need another line back to the tank wend you have a gas pressure washer because is always running because they don’t have auto stop vrs the electric pressure washer. Thanks for watching 🙏
Is that air compressor still alive? It says on their website it's only good for 3,000 hours of use. I'm guessing a mobile detailer will eventually wear one out.
Does the pressure washer have to be the type that continually runs so it doesn’t back up the pump? For example motor is always running vs only runs when the trigger is pulled
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
I’ve wanted a van for the longest time, But in a truck the set up is super slick! Great video!!
Thanks 🙏
OMG I JUST REALIZED YOU GUYS ARE FROM VA!!!!! I'll be in contact with you soon to build me either a van or to fit my truck for mobile detailing. You have no idea how much stress this just took off my shoulders. Idk why I thought you guys were in CA
Awesome brother let us know when you are ready!! 👍🏼👍🏼
Nice clean setup. This setup is Good for a Van setup. With a bigger tank. Perfect setup. You did a good job.
Thanks man!
I have setups for vans as well!
You've inspired me to build a low profile setup in my truck. Just ordered a lot of stuff and don't know where to start. So many ideas!
Amazing brother hope you’re doing good on your business! 👍🏻👍🏻
This is the video I've been looking for. I'm in the same boat with my Ram 2500
Another awesome install Tony. Looks amazing. Your work always looks clean and very professional. Nice work.
Thank you brother!! 🙏🙏
@@RaldasDetailswhere can i buy the pressure washer reel and the extension cord reel . Whats the name of them
Nicely done. Great craftsmanship.
Man, this was such an awesome video. Great great job. Would love to see more videos like this
Definitely great job I’m looking for pull out drawers for the back of my 250 transit van for detailing
You’re the man 👊🏾 keep doing what you’re doing. That’s your calling homie. Good work.
This is amazing. Thank you for sharing. This is exactly that I’m doing. No need for a trailer.
Very few people like to build their own setup... very few people are capable of building a proper setup.. BUT ..... Many people like to buy rather than DIY... i think if you stick at it you will be successful here ...
Thanks brother!!
Quedo súper, yo tengo una GMC EXPRESS y necesito organizarla bien, tiene 3 tanques de 250 galones y máquina de presión honda de 4000
You are a wizard Tony, master at his craft
Thanks bro!! 🙏
Amazing hard work, I'm building mine on my own Maverick
Not gonna lie, that came out nice my friend!!! Good job.👍
Best pick up set up low key
Hello very Good job. Thanks for sharing
your setup its dope!!! Wished you were in the New York area very nice job 👌🔥
Bro you are awesome keep up the good work I live in Canada and looking to build a setup like that again awesome work bro
Thanks bro 🙏
Buenísimos, eso me motiva más, sobretodo la limpieza y calidad que tienen, saludos desde Aguascalientes México.
Gracias Hermano!
I wish you guys were in my state of Michigan to help me set up my DETAIL mobile truck 😢
Very nice and professional looking! 💪🏼
Thanks buddy
Very impressive.
Thank you 🙏
Tony is 100% TO LEGIT,TO LEGIT TO QUIT 👊
Thanks brother!! 😁👍🏼
Very nice!!!! Really like the Ralda detail logo on the build.
Thank you my brother!! 😁
Wow, almost wish I would've bought a pick up truck instead lol
I need this setup done to my tundra 😍🔥
Super nice! I have something similar to this but this is a lot more organized than mine
I never would’ve thought of the outlet idea for the generator, that’s a good idea! Any tips on how to it what I all need for the electrical setup?
I have a video on how to do it in my channel that you can look for it and also I sale them if you want it here www.raldasdetails.com/product/6ft-30-amp-extension-cord-box/
@@RaldasDetails Ok cool! Also how well does that water pump work? I’m looking at putting a slim 110gal water tank in my truck bed but can’t decide how big of water pump to get with. I would assume something like a 2.0 to 2.2gmp would work just fine?
Beautiful and efficient! Need to set a date soon for me (July)
Tony awesome job looks great nice setup as always be safe god bless William from extreme optimum auto detailing pr
Very good idea and definitely great job u made that look easy.
Sure man send me and email at raldasautodetail@gmail.com
You should've had a list of parts of the pump s and where to find at
Mobile setup links recommendations
. A/R blue 630
bit.ly/3bEnN41
. Active VE52
amzn.to/3o5UptU
. 3/8 female quick connect
bit.ly/3FwP0lk
. 3/8 male quick connect
bit.ly/3rjjD9
. Retractable pressures washer reel
amzn.to/3g3RygQ
. 4-way roller bracket
amzn.to/3AFev3b
. Retractable power reel
amzn.to/3H9z7mG
. Water pump
amzn.to/39pZVzU
. Water pump 2
amzn.to/3sglXOH
. Remote controller
. Float valve
amzn.to/3nYKYNO
. Water pump adapter
amzn.to/35paAff
.Contoller remote
amzn.to/32qfOGc
.Air hose reel
amzn.to/3KPh9Io
. Weep like air hose
amzn.to/3A1Wooo
. Vacuum hose 50’
amzn.to/3G2fJXv
.Vacuum cox reel 1
amzn.to/3g64bHX
. Vacuum cox reel 2
amzn.to/3KSR8Ij
. Beast vacuum
amzn.to/3KK2gqR
. Pressure washer whip line
amzn.to/3KPpICS
. Cox reel pressure washer 50’
amzn.to/3AC1dVg
.Pressure washer hose 1
amzn.to/3Ha81Mg
.Air compressor option 1
amzn.to/3AFvpif
. Air compressor option 2
amzn.to/3u7BAub
. Quick connectors
amzn.to/3rVIz6D
.Westinghouse generator
amzn.to/3HaXzEi
. Garden hose quick connect
amzn.to/3AFFgon
. Strip lights
amzn.to/3s0yAwT
New age cabinets
bit.ly/3mMsNZC
Spot lights
bit.ly/3NPGPWq
Atleast we kno it could be done, looks clean
I watch this video many times. Each time I blow out my ear pods 11:52
Lol 😂
Sorry 😂😂
BROTHER!!! THIS IS AMAZING!!!! So skilled and precise - the owner should feel incredibly lucky. What is the small black hose reel for by the generator?
Thanks brother! The reel is for power
This is awesome! I might have to get you to do something like this in the future, I work out of my truck bed as well. Great work!
Nice Brother Love From Houston Texas 💪🏽
Dude I gotta go down there and let you guys do mines
What a magnificent setup, amazing. Question I'm currently in the process of setting mine up. I'm using a gasoline powered pressure washer. Do I need to install a pump as well or will I have enough pressure without it?
Is all depends on the type of pressure washer some are self priming those ones don’t need!
@@RaldasDetails Thank you for the info. Much appreciated.
You’re super talented man. What brand is the pressure washer reel?
Thanks 🙏 amzn.to/3zwvJ1D
Hello guys i really like this setup .
I want to start also this job ...
Thanks buddy yes do it is great 👍🏼
Outstanding!
Very nice setup ..... 👌awesome job 👏
Thank you!
Hey Tony that is a great setup you put together! Where did you get that water tank from??? I love the look keep up the great work man
Thanks brother! The water tank from Amazon Low Profile Water Tank - 60 Gallon Capacity - 42" x 28" x 18" - Perfect for Mobile Automotive Detailing Use
amzn.to/3v9OXN8
That retractable hose reel is originally for water or air?.
Thanks Tony you are very handy.💪💪
It’s for water 4,000 psi capacity air normally are rated at 300 psi 👍🏻👍🏻🙏🙏
@@RaldasDetails Donde lo compraste.
Nice work
Super nice Toni!! I spent yesterday nearly crying thinking of my set up here in Helsinki! There is no Toni or Raldo’s detailing here so no one to advise me of the set up. I was looking at your setups but all products are from US so not so easy to find similar here in EU. Anyway the extra part you had which I did not think about was the pump. What output is that?
Sorry to hear that bro! The output in the pump is 3.5 gpm
@@RaldasDetails no worries! Thanks for the info. Is the power 12v?
Very nice
Wow! Great work!
hey tony do you have a video on how to secure your water to the chasis of your vehicle? also when it comes to starting your detail setup
do you first
1.) Get the dimensions of your vehicle
2.)weld together and build the frame and then secure that
3.) then add your equipment and secure that as well
Has your plumbing for your water tank changed or improved since your original setup and when you run your 30 amp kit to your generator along with your wireless remote, do you also run an extension off of that
and lastly, did you drill a hole for a return valve for you pump so it doesnt overheat
No brother but I sale a package the help you build you van at raldasdetails.com
Hi Tony. Awesome set up! I would love to have this set up, too bad I am 2k miles away from you. I am curious. What are the measurements for the low profile water tank?
You can get the aspects at detail king I don’t have them sorry!!
Very nice! That looks fantastic. Would the whole platform be able to pull right out if needed?
Yes you can remove it!!
Thanks 🙏
Love the setup but questioning the longevity of the suspension on the left side
Nice job Tony looks great .. what are those hooks called that you use to bolt down the water tank? I just want to do that for my 100gal tank to 3/4in plywood inside my express van. I don’t want to risk anything by drilling into the actual van floor. Thanks in advance Tony 👍🏽
I get them from Home Depot!
@@RaldasDetails ok thank you 🙏🏼 one more question if you don’t mind but would you happen to know what kind of black paint would be best for me to paint my plywood floor in my detail setup? Thanks again Tony have a blessed day
Tony what is that Pressure washer reel you got there? Nice setup as always.
amzn.to/47fyILQ
How long did it take and what’s the total cost for a set up with labor on a rig like this ? You guys killed it 🎉
Mannnnnn where are you located!! This is great!!! I just got my company truck and would love a set up like this!
Thanks! Richmond Virginia
@@RaldasDetails 😩😩 I’m in tampa bay Fl area. Do you have any recommendations in Fl?
@@horizonmobiledetailing call me 8045084610
Man I want you to do that for me for my truck to bad your not in Fort Worth Texas
you the Man! That is awesome!
Where you buy the water tank at ?
Do you have any store links for the equipment here? Especially the hardware mounts. I would love to do something like this!
I do have all the links for the equipment do you want them?
@@RaldasDetails Yes. Can I please have store links?
Turned out perfect 👌
Thanks bro I can’t wait to see the one in the little trailer!!
woww bro so nice
Nice job on the set up, What brand is the pressure hose reel?
Thanks is this one amzn.to/3zwvJ1D
You're the best brother the best 👌🏽💯
Thanks brother!
Que trabajo tan limpio, en una tahoe se puede hacer como la vans que vendio hace poco ??
Si se puede hermano!
I’m glad I got a truck Now.
I have one question though,
Tony if the client would’ve had a 65 Gallon tank instead of the 35 would it still be enough space for all equipment?
Or maybe there would be No space for the Compressor 🤔
What did you put before the seaflo pump? I’m having issues with back pressure and water spraying everywhere when I release the trigger. I installed a check valve between the pump outlet and pressure washer inlet and after a few weeks the hose there finally popped. Not sure if it’s old hose or what, but any recommendations on how to do a proper pump and pressure washer setup would be awesome!
The problem I think is the pressure washer try with out the pump do gravity and see what happens!
I really liked your setup, I have a question: is the water pump always on? or do you only use it to start the kranzle? I have one for my pressure washer but I use it when I don't have enough gravity from the tank.
Hi brother thanks! Sorry for the delay yea is on but it has auto stop
Where can I get the black hose reel for pressure washer hose
Amazon amzn.to/3qWN3gW
How did you manage to bend the sheet metal?
With a press break
@11:06 what do you mean by the not having to worry about the water in the line because of the pump, and when should you have to put another line back into the water tank so that way you can keep recycling the water so the pump doesn’t die..
In this case for example wend you want to fuel up a bucket 🪣 you can easy lose prime in the pressure washer, because you need to open the valve to do it, so the pump will push water back to the pressure washer that is y I said we don’t have to worry, so the kranzle is not going to work hard to suck water.
You need another line back to the tank wend you have a gas pressure washer because is always running because they don’t have auto stop vrs the electric pressure washer. Thanks for watching 🙏
How do you get the diamond plate rapped around the end of the plywood so nicely and is it possible to find it in different color ?
This is not plywood bro is metal and the diamond plate is 1/4 inch thick.
Wow!!!!
Me encanto tony se ve genial
Gracias 🙏
Hey boss this detail is really really nice !!! Would you happen to know what extension reel that is ?
Muy bonito trabajo
Awesome work! Just wasn’t able to see the last minute and a half of the video :(
Thanks bro! No problem you can finish watching today!! 😁👍🏼
Love love love it
I’m curious if you had problems running the Kranzle with the predator 3800. Kranzle recommends at least 4500watts.
Is all good! 👍🏼👍🏼
Tony el mejor doing set up fort mobile detail me llega brother
Hey ralda! awesome setup, how many gallons is that water tank ?
Is that air compressor still alive? It says on their website it's only good for 3,000 hours of use. I'm guessing a mobile detailer will eventually wear one out.
How much you spend with everything
I have truck ram 2004
Around $8,500 not including labor
That a nice setup 👍🏼
You are the man! Great video.
Quedo con madre a si quiero el mío también ando en una troca
Does the pressure washer have to be the type that continually runs so it doesn’t back up the pump?
For example motor is always running vs only runs when the trigger is pulled
Can you link that pressure washer hose reel!
I connected a self priming pump to a ryobi pressure washer, and the hose keeps bursting on me. How did you get it to work? Thanks in advance
Amazing what’s the small 3 way cord called we’re can I find it 😊
Eres un chingon Tony
Jaja gracias 🙏
Where did you get the remote control thing for your electricity.
This one here!!
amzn.to/3zof0xt
@@RaldasDetails Thanks, Just bought it.
Going to be here tomorrow. Gotta love Amazon. :D
Buenas noches randal, una pregunta dónde puedo conseguir ese tanque de agua de bajo perfil; que está instalado en esta camioneta !! Muchas gracias.
En first chose detailing supplies
Awesome setup!. What's the name of retractable water hose?
I’ll look for the link and send it to to!
amazing build, can i know the water tank make/model
Any difficulties pulling the sled out with one person or is it a two man job
Is a 2 man job to be safe