anyone who owns older generation routers can still use wireguard, I tested this guide with a netgear r6400 v1 router all the other stable versions did not start this vpn, thanks to the ddwrt beta version mentioned below in the explanation you will understand how to solve it should work on all old-fashioned ddwrt routers. Tutorial: the version to use is r50146 all the others on the old operating systems do not work. Following are the steps performed on the r50146 dd-wrt version: 1. Go to Configuration> Basic Configuration> Network Configuration> NTP Client Settings> Time Zone> Set your time zone from the list> Save 2. Setp> Tunnel> Import configuration> Browse the previously downloaded wireguard file> Save 3. After import, change MTU to 1420 4. Local public key> Leave it blank (because you won't be able to type it) 5. DNS server via Tunnel (separated by comma and space)> 162.252.172.57, 149.154.159.92 6. Inbound Firewall and Kill Switch> Check the box 7. The following settings should be filled in automatically, but I've mentioned the steps for less tech-savvy folks below: 8. Enpoint - Enable 9. Endpoint address (varies from user to user, in my case the Vancouver location) - ca-van.prod.surfshark.com 10. IP allowed - 0.0.0.0/0 11. Route allowed IPs through tunnel - Enable 12. Persistent keep-alive - 30 13. Peer public key - 14. Click Save> Apply Settings> Wait 10-15 Seconds> You're done 15. You will notice that the local public key automatically matches the public key you initially saved from the Surfshark account.
Hi there! I’ve been in love with Surfshark for almost a year! I recently upgrade my router to OPNSense and I have vlans setup for iOT and such but I can’t find a tutorial on how to setup Surfshark on OPNSense, can you please make a tutorial on it?
Hi, I have trying the ddwrt link from your side but unfortunately after flash the factory to ddwrt bin file as keep on going stock firmware for LINKSYS WRT1200AC. What is the problem actually? Thanks 😊
Hello friends, please, I need help with a tutorial to configure Wireguard on a Mikrotik router. I have been waiting for a long time but there is still nothing on the web. Many thanks! 🙏🙏🙏
@@SurfsharkAcademy Step #4 Here you will need to fill in some information. First, paste the Private Key you got earlier....I see nowhere to past it.DD-WRT v3.0-r50274 std (09/27/22)
finally I got it to work on Asus GT-AXE11000 with VPN Fusion/WireGuard. Over500 Mbps about 1/2 the speed but still faster then any vpn client.
anyone who owns older generation routers can still use wireguard,
I tested this guide with a netgear r6400 v1 router all the other stable versions did not start this vpn, thanks to the ddwrt beta version mentioned below in the explanation you will understand how to solve it should work on all old-fashioned ddwrt routers.
Tutorial:
the version to use is r50146 all the others on the old operating systems do not work.
Following are the steps performed on the r50146 dd-wrt version:
1. Go to Configuration> Basic Configuration> Network Configuration> NTP Client Settings> Time Zone> Set your time zone from the list> Save
2. Setp> Tunnel> Import configuration> Browse the previously downloaded wireguard file> Save
3. After import, change MTU to 1420
4. Local public key> Leave it blank (because you won't be able to type it)
5. DNS server via Tunnel (separated by comma and space)> 162.252.172.57, 149.154.159.92
6. Inbound Firewall and Kill Switch> Check the box
7. The following settings should be filled in automatically, but I've mentioned the steps for less tech-savvy folks below:
8. Enpoint - Enable
9. Endpoint address (varies from user to user, in my case the Vancouver location) - ca-van.prod.surfshark.com
10. IP allowed - 0.0.0.0/0
11. Route allowed IPs through tunnel - Enable
12. Persistent keep-alive - 30
13. Peer public key -
14. Click Save> Apply Settings> Wait 10-15 Seconds> You're done
15. You will notice that the local public key automatically matches the public key you initially saved from the Surfshark account.
if b😅i come hjjj king birthday x the😮 fccf😮fo mcd hi inj m in no t cat y😊y
Can you use your Static IP with these settings ? - If so where will it be set ?
I've the tp-link archer c7 v5 with dd-wrt firmware 50963 but it's not connecting with wireguard ... Any help ??
Works great on my Linksys WRT3200ACM
**Edit so while this works . It randomly changes my location from mia to NL everyso often even though my server is mia☹☹.
Hi there! I’ve been in love with Surfshark for almost a year! I recently upgrade my router to OPNSense and I have vlans setup for iOT and such but I can’t find a tutorial on how to setup Surfshark on OPNSense, can you please make a tutorial on it?
i have my own vpn with wiregaurd but it doesn't connect via dd wrt , it does workif i import same tunnle in wiregaurd app on phone or windows
how to addting adguard home on router? bro
Hi, I have trying the ddwrt link from your side but unfortunately after flash the factory to ddwrt bin file as keep on going stock firmware for LINKSYS WRT1200AC. What is the problem actually? Thanks 😊
After 3 times confirm all details, not work on DD-WRT v3.0-r51043 std using a LINKSYS WRT3200
@@SurfsharkAcademy thanks 🙏 for your reply yes try 1400 1420 1440 not working unfortunately!
@@MyTv-zd2hk I have the same router I needed to be on 1420 it would not browse otherwise.
Hello friends, please, I need help with a tutorial to configure Wireguard on a Mikrotik router. I have been waiting for a long time but there is still nothing on the web. Many thanks! 🙏🙏🙏
Hi mate, i think you need make a video how to install ddwrt on stock firmware
Whatever you said didn't work for me.
@@SurfsharkAcademy Step #4 Here you will need to fill in some information. First, paste the Private Key you got earlier....I see nowhere to past it.DD-WRT v3.0-r50274 std (09/27/22)
@john...i have the same problem...still working on it, i'll let you know if anything comes up.
This Wireguard _client_ on the server
Wireguard don’t working in Russia ;(
minuses?)