Sharpening Curved Grooming Shears
HTML-код
- Опубликовано: 10 сен 2024
- How to sharpen standard curved grooming shears on the Twice as Sharp scissors sharpener.
This is one of our most frequently asked questions and we see this issue arise in the various forums. This video shows our tips and tricks on sharpening these curved shears and keeping the angle consistent.
If you have any other questions, let us know: customerservice@wolffind.com
How to Sharpen Scissors: ss1.us/a/oGH3sKfg
Setting Angles and Clamping Scissors: ss1.us/a/k0htIHeH
Sharpen Different Kinds of Scissors: ss1.us/a/IBWDseM6
Wolff Industries, Inc: ss1.us/a/1kPLbXek
Twice as Sharp®: ss1.us/a/Dbq2FscJ
Twice as Sharp® Tune Up Kit: ss1.us/a/cGxb38Ux
DC-1000 Dust Collector: ss1.us/a/sftORCfz
Wolff Industries, Inc. Technical Blog: ss1.us/a/0GyR1yUP 
Наука
Been using TAS for last 15 years. It’s simple, no nonsense equipment.
Yes. Would recommend it to a friend.
Thank you!
Thank you for the video! I must have this machine
Hey Luke, this machine is great if you're working with bevel edge shears. This is the one from the video: www.wolffindustries.com/twice-as-sharp-industrial.html
Congratulations. Very good.
Nice rig.
Nice, just doing 3 curved scissors today, for a 40 year old twice as sharp machine( green colour)
fantastic video
Run a marker along the length of the blade on the inside of the blade.
Very helpful video. Thanks!
Glad it was helpful!
Hey Glen, i'm having trouble with the front of the clamp coming in contact with the wheel as i change the degrees to higher numbers.Maybe i'm using the wrong clamp. Please advise thanks
Try pulling the blade out of the clamp some to increase the space between the clamp jaw and the cutting edge. If the blade is two far down into the clamp, the jaw can hit. Are you able to move it out some and still get a good hold with the clamp?
Use a guitar peck to check for nicks and remove burrs, after sharpening.
Parabéns pelo equipamento tão sofisticado.
Gostaria de comprar somente o gabarito/braçadeira de padrão de lâminas,. Vcs podem me informar preço ??
Abraço
Paulo
Sim, envie um email para customerservice @ wolffind.com e obteremos um preço para você
Qual valor?
Thanks for the explanation I would like advice .. Is this machine good for razors?
We only recommend this machine for scissors. I am not sure about the machine that you linked. We only sharpen scissors here at Wolff Industries. We don't deal with knives or razors. Sorry!
hi.I have a hira to, I wanted to ask you if it is possible to use water as a lubricant so that the sanding discs are always wet and the scissors do not overheat and there is not so much metal dust in the air
Hey Julian,
The machine was made to accommodate a drip feed bottle to be attached to the brass bolt. It was an optional accessory and in 12 years we have not sold one. The main reason is the additional mess it creates due to the constant spray of water from off the disc out onto the sharpener. Secondly, a spray bottle works well and makes less mess. As a caution, do not use too much water; this will cause moisture and grit build up on top of the motor and eventually cause rusting and motor failure. This is not covered by the warrantee. Dust containment is best achieved with a vacuum system as the water drip or spray will not be sufficient to prevent all airborne particulate. - Glen
OK thank you very much
I want this machine ......what is its prize and from where I can get the order
you can order on our website: wolffindustries.com or shoot us an email at customerservice (at) wolffind (dot) com
Sir, I have a question for you please tell us, how to apply bend on curve scissor in material 440c blades before applying bend what is the hardness of 440C blades !!!!!!
The hardness of 440c steel depends on how it is heat-treated by the scissors manufacturer. Different pairs of 440c scissors can be different hardness levels. We use a pneumatic press to put the curve in scissors blades. The blades we curve are no harder than 60 Rockwell. Once they are harder than that, they tend to break in the machine.
Blade is hollow ground from the factory
Lovely
Toi muon đã mua chiếc may nay
Toi phai lam cách nao
How much cost, and send address to by
Muito bom esse braço articulado fantástico
Can you sharpen curved shears on a Hira Too?
Yeah, you can sharpen curved shears on the Hira-to. We should do a short video demonstrating that.
Whats the national average charge to sharpen groomer curved 7" shears?
John, sorry for the delayed response. Check out Sharpener's Report newsletter. They do a yearly report on average sharpening prices.
Thanks for video. What diameter has a stick of the clamp? Or what diameter a hole in the arm?
Hey E2, the pin diameter is 0.250
How much price this machine can available on Amazon?
Can't confirm pricing on Amazon. We don't sell direct on Amazon but some of our distributors do sell there.
What wheel would you recommend for sharpening grooming scissors?
For bevel edge grooming shears, the standard sharpening wheel and the professional honing wheel.
@@wolffindustries thank you
with your quipment can khife be sharpen?
No, we recommend this system only for scissors. For knives, we recommend a Tru-Hone Light Commercial sharpener.
which material is the honingwheel. is it felt.?
No, it's not felt. It's a compressed cotton cloth with varying levels of abrasive additive depending on which honing wheel you have. The standard honing wheel has the lowest amount of grit so it's the most abrasive, followed by the industrial honing wheel, and lastly, the highest grit option for the smoothest polish is the professional honing wheel
That’s a nice grinder. You have a link for that?
Sorry for the delayed response. I hope you found what you were looking for, but if not, its on our website wolffindustries.com
do you ever sharpen at 25 degrees or lower?
Yes sometimes depending on what material we are cutting. We sharpen some Kevlar shears at 15 degrees
Why don't you disassemble the shears first?
We only disassemble if there is a ride line on the shears or if we can’t open the shears up enough to access the whole edge. These were beveled shears so they don’t have a ride line.
Máy mài này có bán không vậy a chị
Có, chúng tôi bán máy xay này trên trang web của chúng tôi - wolffindustries.com
Can this do convex grooming shears?
The machine can, but you'd want different wheels than what is shown in the video. Shoot us an email at customerservice@wolffind.com and we can answer that question in more detail
How do you do it without that fancy holder clamp?
I guess if you don't have the arm or clamp, you would have to free hand it which would be very hard to keep the angle consistent through the curve.
when I speak of putting water I mean a constant drop to keep the discs moist
No Before and after paper / wet paper cutting demonstration = I'm not sold.
So that’s all you need to be sold? Sweet! I’ll post a short this week sharpening start to finish with the tissue test, time lapse, and no cuts. Then I’ll be looking for your order 😜🙃
इसका मूल्य क्या है।
how about thinning shears?
For most thinning shears, we would recommend just sharpening the standard edge and not touching the teeth unless there is an obvious issue with one of the teeth. Since they just hold the hair, you don't need to sharpen them.
Why not CBN wheels?
We have tested CBN wheels along with many other types. The main concern with all wheels is that we are working to reduce the burning of the steel. Our 27000 sharpening wheel is a friable aluminum oxide and is designed to break down as it cuts to keep fresh grit on the surface, reducing the heat on the metal. Generally to reduce the heat on CBN wheels require a coolant to reduce the heating during cutting. Also, price is a big factor as to why we don't use CBN wheels on the Twice as Sharp.
sorry for my english I use the Google translator
сколько стоит?
$512.10
first mention how much equipment cost without it your video do not make sense. seen many such videos but no one mention about the quipment and the cost. oyur method is costly affair. provide some inexpensive method for sharpeeninf so every person can effort that what is called professionsim.
All of our prices can be found on our website www.wolffindustries.com
Sharpening is difficult, it requires skill and equipment. I'd have your blades professionally serviced if I were you.