@@MassBayDJ when I run two tops and one sub I just go one cable from mixer to sub and then from sub to top and the other side cable straight from mixer to top.
@@DJBrianRodrigues thanks for the response. That doesn’t imbalance the sound? I guess it doesn’t matter if you’re running a controller through an external mixer right?
I have 3 BB 15'S brand new and all have the same issues. LED lights are on but lacks power. I run my mixer directly into the subs then up to tops. Volume is maxed out and does not shake anything in my small house, where as my smaller FBT SUBLINE 112SA 700 Watt RMS shakes my house. I also thought Bassboss was made in america, mine says made in Made in Malaysia. Any tips on getting their true power out? Also, when i take out my top speakers and only have the subs playing they do have sound but when i turn on my tops the bass seems to lack. Is it my gain structure or i have 3 defects?
@@esezate1 these subs require quite a bit of power to get them going. Are you using an external mixer? that will give them a little more gain. There are also new updates that raise the input sensitivity so you don’t have to crank them as high on the bassboss website. The Mk1 and Mk2 were built in the USA the MK3s are not. With bassboss recent expansion to be able to keep up with the demand all over the world they had to move to Malaysia. I highly doubt you have 3 defective subwoofers. I mean these little things are animals and so loud. Maybe get on the phone with bassboss? They have amazing customer service and should be able to help.
I’ve got a pair of Soundboks 3 speakers that I use for mobile off grid sets. Thinking about adding a sub or two for larger events, think the Soundboks would be able to keep up as tops?
Hey bud honestly I have never heard of Soundboks 3 speakers but from doing a little research it doesn’t look like they will. This is a very serious subwoofer. You need at least 1000 watt cabinet above it
Sweet spot ! 15”
It’s remarkable!
How would you compare this sub to some of RCFs 18s 8003 or 8004
8003 is about 4 db louder, and goes deeper. 8004 goes deeper yet, and more like 6-7db louder according to spec
Clean tighter bass vs rcf pretty close
I’ve heard that it sounds like a 18” sub, is that true?
Yes it kicks ass!
What is the price of this sub?
$2995
Do you run two tops through it? If so how? It would be cool to see a demo of how you configure it in your set up
@@MassBayDJ when I run two tops and one sub I just go one cable from mixer to sub and then from sub to top and the other side cable straight from mixer to top.
@@DJBrianRodrigues thanks for the response. That doesn’t imbalance the sound? I guess it doesn’t matter if you’re running a controller through an external mixer right?
@@MassBayDJ no not at all bassboss recommended a running subwoofers on stereo. Yes I use external mixer
I have 3 BB 15'S brand new and all have the same issues. LED lights are on but lacks power. I run my mixer directly into the subs then up to tops. Volume is maxed out and does not shake anything in my small house, where as my smaller FBT SUBLINE 112SA 700 Watt RMS shakes my house. I also thought Bassboss was made in america, mine says made in Made in Malaysia. Any tips on getting their true power out? Also, when i take out my top speakers and only have the subs playing they do have sound but when i turn on my tops the bass seems to lack. Is it my gain structure or i have 3 defects?
@@esezate1 these subs require quite a bit of power to get them going. Are you using an external mixer? that will give them a little more gain. There are also new updates that raise the input sensitivity so you don’t have to crank them as high on the bassboss website. The Mk1 and Mk2 were built in the USA the MK3s are not. With bassboss recent expansion to be able to keep up with the demand all over the world they had to move to Malaysia. I highly doubt you have 3 defective subwoofers. I mean these little things are animals and so loud. Maybe get on the phone with bassboss? They have amazing customer service and should be able to help.
@@DJBrianRodrigues thank you. Yes I use a Yamaha AG06 mixer. So you suggest I download the firmware?
@@esezate1 it increases gain sensitivity
Can you do a this 15" vs ETX 18" sub?
I don’t have EV subwoofers but I’m sure this would be louder.
was that voice coming out the bass box?
I had some tops slightly on so that you’d be able to recognize the song
App??
@@Earthcitizen4609 yes bassboss has a controlbass app you can use to update firmware, change presets, monitor limits
I’ve got a pair of Soundboks 3 speakers that I use for mobile off grid sets. Thinking about adding a sub or two for larger events, think the Soundboks would be able to keep up as tops?
Hey bud honestly I have never heard of Soundboks 3 speakers but from doing a little research it doesn’t look like they will. This is a very serious subwoofer. You need at least 1000 watt cabinet above it
@@DJBrianRodrigues How about QSC K12.2 or Das Audio Vantec 12 A .Can it pair with this subwoofer ?
@@jirawatliw180 yes this is a very powerful subwoofer for the site
@@DJBrianRodrigues what You mean so can pair with QSC k12.2 or Vantec 12 a or too powerful since QSC K12.2 is 2000 watts and Vantec 12 A is 1500 watt
9.2A at 240v doesn't equate to 2.5kw output power! 4x2.3Amps..
Nominal
Maximum
Peak
Input level need to 3 o'clock 🤷
Listen I don’t own yorkville but I’ve seen and heard their 15 and I completely blows this piece of junk away
Yorkvilles are also sick
Yorkville is good but not in the same tier / level as Bass Boss. Anyone who knows sound know this.
quiero ese poleron bass boss