It's a charcoal canister for fuel vapor to collect in. It commonly causes bogging issues and doesn't allow proper air flow. Remove it. Kobe it into the trash.
links dont work to the block off plates. I tried to google what was on the package and nothing. Can you check your purchase history and get me the info? Please and ty
"Universal Parts GY6 PAIR Block Off Plate" www.scooterpartscatalog.com/164-324-pcv.html?gclid=Cj0KCQiAg_KbBhDLARIsANx7wAymzJ5mKFD4JiTeN5VEj8R9PUAuU53h8yi2yVntuinfdTL4_rhBC3gaAjkeEALw_wcB
@@Entirelyxtooxtired between the block off plate and the carb. You can also check under your fairings (plastics) for the breather (vent) tube near the top of the tank. If it has came loose a full tank can leak from there.
can u explain the part of minute 1.55?
It's a charcoal canister for fuel vapor to collect in. It commonly causes bogging issues and doesn't allow proper air flow. Remove it. Kobe it into the trash.
links dont work to the block off plates. I tried to google what was on the package and nothing. Can you check your purchase history and get me the info? Please and ty
I will ask my buddies about a secondary link and get right back to you.
"PCV Block-off Plate - GY6 150cc, (NCY Brand) - Walmart.com" www.walmart.com/ip/PCV-Block-off-Plate-GY6-150cc-NCY-Brand/906432081?wmlspartner=wlpa&selectedSellerId=101001358&adid=22222222228000000000&wl0=&wl1=g&wl2=m&wl3=42423897272&wl4=aud-1651068664506:pla-51320962143&wl5=1024297&wl6=&wl7=&wl8=&wl9=pla&wl10=143803485&wl11=online&wl12=906432081_101001358&veh=sem&gclid=Cj0KCQiAg_KbBhDLARIsANx7wAxv-EBdslbXlibhkNJ8_H4cX3dLfDfheYzMvrPZNRHt-_WM4NPiFrkaAnIeEALw_wcB
"Universal Parts GY6 PAIR Block Off Plate" www.scooterpartscatalog.com/164-324-pcv.html?gclid=Cj0KCQiAg_KbBhDLARIsANx7wAymzJ5mKFD4JiTeN5VEj8R9PUAuU53h8yi2yVntuinfdTL4_rhBC3gaAjkeEALw_wcB
Both of these links are to parts that have been confirmed to fit.
@@MAYOMONKEYyt thank you i will most likely go with the one from scooter parts since it comes with hardware
My bike is leaking gas. Could this be why??
If its not snug yes. Try cutting out a new rubber spacer
@@MAYOMONKEYyt I'm sorry what does that mean where does the rubber spacer go? I just bought this bike
@@Entirelyxtooxtired between the block off plate and the carb. You can also check under your fairings (plastics) for the breather (vent) tube near the top of the tank. If it has came loose a full tank can leak from there.
How do you remove the actual emissions canister
Just pull it off its connected tubes, then remove them. Typically you'll have to take your left fairing off
Where do I get this from
Link to EGR block off plate?
www.ebay.com/itm/192442529967
Feel free to comment for any other parts that fit. Like and sub g! I'll be posting a video next week about a sprocket exchange.
@@MAYOMONKEYyt that link doesn’t work anymore where else can I find one
@@zachcutler7912 ill find a few links gimme a second
Where does the holes go?
On the bolt, then you put the hex boly nuts back on. They press it over the hole. Use blue loctite.
If it was you I won’t be able to find this blockage kit
Good luck mate!
Feel free to subscribe. More videos are coming. Just had bad luck with the weather.