Хорошие ключи 440,если оригинал. И зауженость часто хорошую службу служила, при ремонте техники в очень ограниченном пространстве. При очень жёсткой эксплуатации ни один ключ в наборе не сломался. Единственный минус это высокая цена,но если это личные ключи, а не "общаковые", то отличное решение. К тому же они красивые.
Добрый день, Федор вы не правы про ключи 440 на счет узких губок на открытом конце, сам работаю механиком и как-раз кстати долго не мог найти такие с узкими губками , это очень удобно, с ними подлезешь и проставишь их в ограниченных местах где другими невозможно, сам использую такие и не только, это одни из самых удобных, крепких и легких ключей на сегодняшний день ! Хорошие видео ! Удачи вам !
Да я-то не против, главное, чтобы декларируемая высокая прочность от таких "оптимизаций" не падала. А то по обзору на гаражжурнале они сильно солиднее выглядели раньше... я в добрые намерения производителей хотел бы верить, да как-то не получается.
А нет других аналогов Facom 467.AS с функцией Anti'Slip? После 3-х часов поиска немагнитной гайки крепления турбины я очень захотел такой сет, но они больше 200 долл. Хотелось бы за 100
Поищите среди ассортимента Toptul, точно артикул не скажу, но вроде бы они Факому все и куют на самом деле. Если это не заказное ноу-хау под патент, конечно.
Most probably Taiwan. They are very similar to Toptul AAEW Super-torque series. And holder set is GSAQ ... Toptul/Rotar makes a lot of wrenches for respectable brands if we compare design side-by-side.
@@willietierney5319 Why are you dropping here? Do you think we're stupid? You’re stupid, and we Russians are very cunning and mean, because the great PUTIN leads us! You can’t be fooled - this is Taiwan of average quality, and you shit-eater do not teach Russians to live!
@@canada8460 if the 440 model is made before 2014, are fabricated in Taiwan with high quality standars... post 2015 the fabrication went back to France. I dont understand anything of the video, I am from Spain, just watching
Not made in France anymore ? Just asking, because on forums I got mixed results/answers... So, are they made by Toptul in Taiwan or in France ? I know for a fact the old 40 series were made in France, and, at least at some point, the new 440 series were made in Taiwan, but I thought (based on what other people with far more experience than me said on Garage Board forum) they moved production back home. Thanks in advance for your answer. P.S. : What would the Rockwell hardness would be for the 440 serie ? (Stahlwille are at 47 HRC, with Proxxon Industrial close at 45 HRC, and all the great names like Hazet, Gedore, etc. at 40-42)
@@paul-cristianmihai4431 supposedly, the Facom 440 model were fabricated in Taiwan under Facoms specification untill (yes, untill) 2014. 2015 onwards the production, supposedly, went back to France. some.tricks to find it out; if it has the serial number stamped, are fron Taiwan, and if only has the favom and 440 logo, no serial numberd impresed, they are French made. suppsedly... cant confirm
I just bought the Facom 440 wrench set...these are very underrated wrenches..very underrated brand in USA...great tools...☝️
Хорошие ключи 440,если оригинал. И зауженость часто хорошую службу служила, при ремонте техники в очень ограниченном пространстве. При очень жёсткой эксплуатации ни один ключ в наборе не сломался. Единственный минус это высокая цена,но если это личные ключи, а не "общаковые", то отличное решение. К тому же они красивые.
При коротком рычаге никогда такой ключ не сломается, если на рожки ему трубу не надевать. Удобен в тесных местах. Достойные ключи
Хороший инструменты сделаны в Тайване.
А в России вы можете пощупать инструмент Facom у нас в Санкт-Петербурге. Спасибо за обзор.
Добрый день, Федор вы не правы про ключи 440 на счет узких губок на открытом конце, сам работаю механиком и как-раз кстати долго не мог найти такие с узкими губками , это очень удобно, с ними подлезешь и проставишь их в ограниченных местах где другими невозможно, сам использую такие и не только, это одни из самых удобных, крепких и легких ключей на сегодняшний день ! Хорошие видео ! Удачи вам !
Да я-то не против, главное, чтобы декларируемая высокая прочность от таких "оптимизаций" не падала.
А то по обзору на гаражжурнале они сильно солиднее выглядели раньше... я в добрые намерения производителей хотел бы верить, да как-то не получается.
Fedor Mikolakhin уверяю вас они очень прочные ! ) я думаю вряд ли Факом выпустила бы их на рынок без серии тестов на прочность и эластичность
👍
Ну как ваш инструмент по прошествии шести лет? Довольны?
А нет других аналогов Facom 467.AS с функцией Anti'Slip? После 3-х часов поиска немагнитной гайки крепления турбины я очень захотел такой сет, но они больше 200 долл. Хотелось бы за 100
Поищите среди ассортимента Toptul, точно артикул не скажу, но вроде бы они Факому все и куют на самом деле.
Если это не заказное ноу-хау под патент, конечно.
Hi, do you think other makes is spanner will fit in this case?
I can see no reason why not. Facom are quite slim though. Tactix is a cheap brand with a similar storage design.
ну как там 440ые поживают?
Dinh facom v. Nepros number one
Where can buy this tools !
Tbs-aachen internet store
Don't know if they still available now ...
Where are they made?
Most probably Taiwan. They are very similar to Toptul AAEW Super-torque series. And holder set is GSAQ ...
Toptul/Rotar makes a lot of wrenches for respectable brands if we compare design side-by-side.
Facom are a French brand. Excellent quality. Expensive.
@@willietierney5319 Why are you dropping here? Do you think we're stupid? You’re stupid, and we Russians are very cunning and mean, because the great PUTIN leads us! You can’t be fooled - this is Taiwan of average quality, and you shit-eater do not teach Russians to live!
@@canada8460 if the 440 model is made before 2014, are fabricated in Taiwan with high quality standars... post 2015 the fabrication went back to France.
I dont understand anything of the video, I am from Spain, just watching
@@Romassj2 👍✌️🤠
Could somebody resume me what he says? I really appreciate Russian people opinión, but I am spanish and I cant understand russian 😅
He is disappointed with the decline in quality and the departure of the old philosophy of series 440.
@@Raazik oh 😓 ....
bought ones ... hope they last good time
Taiwan
Not made in France anymore ? Just asking, because on forums I got mixed results/answers... So, are they made by Toptul in Taiwan or in France ? I know for a fact the old 40 series were made in France, and, at least at some point, the new 440 series were made in Taiwan, but I thought (based on what other people with far more experience than me said on Garage Board forum) they moved production back home. Thanks in advance for your answer. P.S. : What would the Rockwell hardness would be for the 440 serie ? (Stahlwille are at 47 HRC, with Proxxon Industrial close at 45 HRC, and all the great names like Hazet, Gedore, etc. at 40-42)
Тайваньщина...
@@paul-cristianmihai4431 supposedly, the Facom 440 model were fabricated in Taiwan under Facoms specification untill (yes, untill) 2014.
2015 onwards the production, supposedly, went back to France.
some.tricks to find it out; if it has the serial number stamped, are fron Taiwan, and if only has the favom and 440 logo, no serial numberd impresed, they are French made.
suppsedly... cant confirm