I'm so glad I tuned into this channel because for years I really had a problem getting my fish to stick together and never even realizing that they make fish glue it's amazing what you can learn
Ted, I want to thank you so much for helping me learn how to fix my own guitars. As a full-custody, single Dad with two teenagers I can't really afford my dream guitar. So I play budget guitars, and have most of them playing nicely except for one. 2 years ago I bought a Mitchell ME1CE on sale for about $230, it is a beautiful looking guitar that looks and feels well made. But it had a problem, a buzzing issue which i thought i could easily fix or so I thought. I messed with this guitar countless times and finally got the action adjusted so that it was perfect. But it still buzzed like crazy past the 8th fret and it sounded too bright. It turns out that the guitar was shipped without a proper fret job. So I followed your instructions, used a fret rocker and then filed down my frets so that they are all now perfectly balanced. The end result is that now this cheapo guitar plays like a guitar worth 5 times it's cost and for the first time in 2 years I actually want to play this guitar. I owe it to you sir! Thank you so much for for your highly practical lessons, I was ready to pawn this guitar or trade it for another one, and now I want to keep it. Thanks again!
Wow, i have one of these, nearly the same. The over all condition of my instrument is nearly mint, seems like not used, after 60+ years. i got it as a gift and it is very nice playable and rings like a bell. The sustain is about 18 seconds. Ok, it is not a high end guitar, but for the time in which they build it, it is very nice done....
I bought one of these guitars -a very early example from 1952, serial number under 2000 I seem to remember- in Denmark Street in London. It had a loose heel joint- actually flopping around in there- and an action that made it feel like punishment. Now, I bought that guitar for it's sound. It boomed and jangled at the same time. I had a confident luthier reset the neck and remove material from the bridge, both improving the action. I played that guitar in bands around the country. Sometimes hot through fuzz boxes and old amps, sometimes clean, mic'd up with a little treble from the pickup I had installed. I sold that guitar a few years ago for roughly the money I put into it plus the cost of the instrument- break even. Now I have no guitar and money doesn't play the same. Investment in an instrument should be personal and grounded. Nice to hear your relationship with the customer is honest and earnest.
@@richardweinberger6302 Hey my friend,. My dear old pops got me an arch top Harmony for Christmas one year. I don't know what he paid for it or where. The "music" store in our town when I was a sophomore in highschool in '62 was just a few C&W records, maybe a guitar string or 3. That was about it as I seem to recall. Yeah, there was a C&W band that would play in a place called the Cave, which was underneath a building in my town. Some of my old partners in crime in those days would sneak down the steps, poke our heads into the door to see what sort of denizens would be present inside. The bartender saw us and yelled to get out a stay out ! Holy cow, we knew it was adults only allowed -- we just wanted to get a glimpse. Anyway, I don't think my old man paid more than 20 bucks. One of the fellows in my dad's Dixie Land band showed me some chords and how to tune it to pitch. Gawd forbid I ever break a string tuning it. I'm of the opinion these working musicians, such as they were had to drive to Billings, MT to get strings, etc. The strings were rusty, the windings we're coming off before I ever knew one had to change strings every once or twice in a year or two. But I had Peter, Paul and Mary to listen to and try in vain to figure out how they played those songs....By my senior year we had Dylan and Blowin' In the Wind. What fun learning how to play that, even with decrepit strings. Still nothing broke in those years. Somewhere in '66 and with a bit more knowledge about good guitars, I was stationed in California in the military, so was able to buy a Gibson J-50 new off the wall in a phenomenal music store in Sacramento. Ha, they even had guitar strings. I paid $250 for that J-50. Kept that gem for many decades until I had to sell it during Dubya Bush's tenure due to financial hardships. It broke my heart -- it was like a beloved lady leaving me. Elderly in Michigan gave me $1,880 for it. Vintage, ya know and well cared for. That's my guitar story. Never replaced it -- discovered the mandolin instead. Cheers, brother. Bob in Montana. 😃😁🍺🍅❤️☮️
This is the best RUclips channel that I have dug into in a while. It’s been like 1 week, 30+ hours of watch time , and I feel like I’ve learned more about not just guitar repair, but guitar history and culture, than I have on any other formant .
Great video. I like the pace and the way you explain things. For those press in tuner bushings on many older, less expensive guitars I"ve found that small metal grommets that you can buy at fabric or sewing stores are an exact replacement, especially on Harmonys, Kays, Stellas, etc. They are very inexpensive and they come in many small sizes
According to the guitar tech who sorted out my Hofner Congress, they were shipped from the Hofner factory without being set up, the retailer was supposed to do that but they rarely did.
Its not just the learning that is good from you, its also the experience you carry to us. Many cannot afford the repairs and don't know how valuable this is. God bless ya!
I picked up a Silvertone and Kay archtop at estate sale for $10 dollar each. They're in for repair right now. 40 and 50 dollars to repair. So appreciate your comments on the worth of repairing theses things. Just trying to get them playable. They are good wall ornaments! Thanks, enjoy watching your channel.
Wow! There is some seriously thoughtful and careful craftsmanship on display in this video. Of course, it's what we've come to expect from you, Twoodfrd. It is a pleasure to watch you work, sir. I love seeing these old wall-hangers coming back to life. It probably plays and sounds better now than it ever did. Thanks for making these videos!
Great stuff! I’ve been to the original factory in.Bubenreuth and the new one(they moved in the late 60’s but still call it the new one..) in Haganu. They have a lot of cellulose nitrate from the 50’s & 60’s saved that was used for inlays! Really nice folks!
You also have to take into account the sentimental value to the customer. I have repaired many guitars that customers have been told are not worth repairing because the tech decided that it wasn't worth the effort or cost. I just did one of these Hofner's a few months ago. It was the sentimental value that made it worthwhile doing. Every guitar has a story and some are amazing.
Interesting that he would mention about the changing dimensions of the ball ends of strings over years and it just so happens that the diamond string factory in New Brunswick New Jersey renovated the building and gave me all the lumber they pulled out of the building but in doing so I ended up with tons of ball ends dating back to the 1800s and whatever that's worth I'll just say good night
Thanks again for the effort that goes into letting us all watch you work. We really appreciate it. I have learned more from your channel than all the other luthiery channels combined.
I had to reset the neck and re attach one of the top struts on my old Framus archtop I rescued . You can't really get super slinky action on these old girls, they never had it back in the day. Yep when changing strings, the ball ends get well stuck, suspect that ball ends have changed over time. Love your videos :)
I had a 1950s Hofner Senator arch top back in the early 1960s so I’ve found this video even more enjoyable than usual. My guitar had a three piece neck but no adjustable truss rod, (I don’t know if it had a bar in the neck). It had a Hofner single coil pickup which attached to the end of the neck and I actually used the guitar to play several gigs with the beat group I was in at the time. I remember that it had a really heavy action despite me sanding down the bridge so it was really hard on the fingers. Although it was a fabulously good looking instrument I very quickly traded in part exchange for a nice red Hofner Colorama solid, although not the finest guitar in the world it didn’t sound completely horrible and got me through a summer holiday season playing 6 gigs a week at holiday parks without shredding my fingers.
Thank you so much for these videos! I am not a guitar repair guy...but I think guitars are beautiful...and I play a little. Your obvious passion and skill coupled with your calm demeanour makes for a fantastic companion to my morning coffee.
Love your channel, love what you do and the respect and professional way you go about any repairs you do, it's so nice to see someone who cares about their work. And hi from Wales UK.
At 13:35, although I often cut screws and bolts shorter with the Dremel tool, some electrical crimpers have a set of built-in threaded cut-offs for #4, 6, 8 and 10 (SAE) screws that gives you a clean, essentially burr-free edge to the shortened screw. You can also buy crimpers with metric-thread cutoffs but those are much harder to find and typically a bit more expensive.
A have a 1960 Framus which apart from having a cutaway is almost identical. Action was very high on this, I made a new bridge out of ebony to sort this. Also, gave it a refret, installed electrics and now it plays great.
had one, her name was lulu. Could only keep 2 strings in tune. a great bass guitar. one day I took off the strings and found that the neck had broken and was kept by the strings.,heavy strings and trying to keep up with the volume. She went to guitar heaven
I know you can't read everything you get - just wanted to say though that I love the channel and your commentary - very droll and witty, lots of eclectic asides and observations! I have binged your videos HARD, and love, love the channel. Thanks so much. I am also learning a tremendous amount - I am a woodworker and hobbyist, and am thinking of doing a kit or finding a guitar to repair/rebuild for fun. Cheers from NH, USA!
Thanks for this mate, I have a 456 and was trying to fix a couple of these issues myself. Hands down, the best structured and we'll thought out guitar fix video I have found! I'm missing the strap button from the bottom of my hofner and I'm not sure how to fix it / whether the fix is worth the risk of breaking it, it seems like the join where the strap button was is pretty vulnerable. No obligation to respond, but if anyone reads this and has a fix - I'm keen!
These old Hofner guitars and basses never used the type strap needing a strap button. Most used a strap that was tied in front of the nut, under the strings. McCartneys strap is actually this same style, only he tied it under the heel area of his bass. Brilliant idea even if it did make the bass a bit neck heavy.
That would be a dream to find. Love the whole vibe of that rig. I do have a super nice 1957 Gibson ES125 that is in really good shape and plays so nice its sick. I snagged it from my brothers father in law for $1000 reciently, it was a super buy in my opinion. Wish one like this would come to me somehow.
This is a really cool guitar. Surprisingly little sag in the top arch considering its age. I play a modern Hofner (Verythin Single Cut) and so I have a soft spot for them. Brilliantly conscientious resuscitation work and words of wisdom as always, sir. I almost dig the Freddie Green action in its original condition!
Just a tip re gluing binding in this situation I suggest using un thinned lacquer for the re adhesion if any mishaps it can be wet sanded leveled and buffed..
I have one of these and it had the same problem. I worked on the bridge,as you did ,but still the action was just to high , then one very cold night I heard a : ping ! Some time later I found the neck glue had given way and the neck was loose, I was able to ease the neck out and shim it , now plays beautifully.
I’d call it sentiment vs fetishized. I still have the ‘77 Takamine F-360 (D-28 copy) that I bought new in junior high. It is the first guitar I ever bought and I still love it; it’s in great condition, and plays/sounds great. When I bought it, the MSRP was $300 and I got it at a going out of business sale for $150. Now, if something were to happen it that would required $500 worth of luthier work, I wouldn’t give it a second thought. Yes, that’s likely twice it’s current value, but my “sentimental” connection to that instrument, is deep. I’ve owned/played it for 43 years.
Ted, nice to see you are one of only a small handful of luthiers that know the proper way to fill a bridge to an arch top, Jerry Rosa is among then. Thanks and cheers. Bob
I love celluloid for picks, but it does suck for inlays and pickguards. Because it will inevitably start to decompose. It’s a nice disposable plastic though.
Among my many guitars, I have a Hofner Congress (1965). a Senator (1959) and a President (1965) as well as a Framus (1964/5)...they're lovely to play..I really appreciate your attention to detail..... and I knew somehow you were going to suggest fish glue..!
Just when Todd is done wowing us with his knowledge, train of thought and mechanical skill, working in the smallest scale, gives us a taste of one sweet like. The camera set up of the dremel cutoff was most oddly satisfying to me
Hi there from Jim Paton in Fife, Scotland. I totally agree with your opinion of Hofners of this era.( I owned several of them). I think this one could be a Senator from the late fifties. The UK price new would have been £18 -18 shillings.
I'm currently at the end of restoring a Club 40 which had a broken neck joint and had been butchered for humbuckers. Had the same issue with the tailpiece as I had to use a sacrificial sets of strings to set it up (neck reset so wanted to dial in the action and make sure it was actually salvageable before I started building pickup surrounds to cover the holes in the body from the bucker conversion). Both sets of strings stuck in the tailpiece, used Ernie Balls and then Thomastiks. I'm wondering if modern electric strings run a different sized ball end? I'm only 39 so working on old stuff isn't my day to day but there must be a difference between modern and vintage strings ends rather than this just being a typical Hofner design problem?
I build and work on drums and any time I am going for a vintage WMP (white marine pearl) or am trying to match something from the 40s or 50s, Precision Drum Co. Services can print custom wraps and probably match anything your shooting for. Made from delmar. Just a heads up if you ever are in that route.
Two, one of the first things I do with trapeze tailpieces , is to glue a piece of leather underneath the leading edge to prevent the metal ever coming into contact with the top.
Oh boy oh boy, another present under the tree! Good timing, 'cause I have an SS Stewart archtop on the bench I'm scratching my head over. Again, WHO is that one guy? There's always one "thumbs down" on your videos. Do you do it yourself as sort of a "zen corner"?
I’m catching up on loads of your videos. I have to say thank you for making me laugh at the start of this one … trying to work out if you were John or Paul :)
wait, what did you do about the missing tuning peg bushing? allparts has both stamped sheet metal "vintage" bushings and even plain brass sleeves that would likely fit around that post. did you pull a key off to determine if those were even real bushings or just rings stuck on top of the peghead?
I got a broken one exaclty like this one, just darker sunburst. I know its not finacially smart, but im a musician and it was my granddads guitar. So its not about the money, its for the sentimental value youknow. I asked a luthier for what the job would cost and its was all from 1000$ to 1500$ And im fine with that, it originaly belonged to my grandads brother who passed away many decaded ago. He has since taken care of it, well its not been looked after, so repairs will be needed. But from my perspective! Its worth it, just based on the pure family history it has. Thanks for the headsup in the video! -Mats Odin.
One of the most interesting channels on RUclips.
Arthur. H you are certainly right I agree 100 % I just love his channel.
For sure and it's my ASMR
I'm so glad I tuned into this channel because for years I really had a problem getting my fish to stick together and never even realizing that they make fish glue it's amazing what you can learn
😆
funny! 🙂
With age comes wisdom.
with age comes a joke that works.. 😂
Ted, I want to thank you so much for helping me learn how to fix my own guitars. As a full-custody, single Dad with two teenagers I can't really afford my dream guitar. So I play budget guitars, and have most of them playing nicely except for one. 2 years ago I bought a Mitchell ME1CE on sale for about $230, it is a beautiful looking guitar that looks and feels well made. But it had a problem, a buzzing issue which i thought i could easily fix or so I thought. I messed with this guitar countless times and finally got the action adjusted so that it was perfect. But it still buzzed like crazy past the 8th fret and it sounded too bright. It turns out that the guitar was shipped without a proper fret job. So I followed your instructions, used a fret rocker and then filed down my frets so that they are all now perfectly balanced. The end result is that now this cheapo guitar plays like a guitar worth 5 times it's cost and for the first time in 2 years I actually want to play this guitar. I owe it to you sir! Thank you so much for for your highly practical lessons, I was ready to pawn this guitar or trade it for another one, and now I want to keep it. Thanks again!
Rock on full custody dads! I raised my 20 year old son, he is an incredible person, and I am raising my 10 year old son.
Wow, i have one of these, nearly the same. The over all condition of my instrument is nearly mint, seems like not used, after 60+ years. i got it as a gift and it is very nice playable and rings like a bell. The sustain is about 18 seconds. Ok, it is not a high end guitar, but for the time in which they build it, it is very nice done....
I bought one of these guitars -a very early example from 1952, serial number under 2000 I seem to remember- in Denmark Street in London. It had a loose heel joint- actually flopping around in there- and an action that made it feel like punishment. Now, I bought that guitar for it's sound. It boomed and jangled at the same time.
I had a confident luthier reset the neck and remove material from the bridge, both improving the action. I played that guitar in bands around the country. Sometimes hot through fuzz boxes and old amps, sometimes clean, mic'd up with a little treble from the pickup I had installed.
I sold that guitar a few years ago for roughly the money I put into it plus the cost of the instrument- break even.
Now I have no guitar and money doesn't play the same. Investment in an instrument should be personal and grounded. Nice to hear your relationship with the customer is honest and earnest.
I love what you just did with the harmony
I was hoping to see some bracing mods on that Harmony, like little add-on braces below the soundhole?.
@@richardweinberger6302 Hey my friend,. My dear old pops got me an arch top Harmony for Christmas one year. I don't know what he paid for it or where. The "music" store in our town when I was a sophomore in highschool in '62 was just a few C&W records, maybe a guitar string or 3. That was about it as I seem to recall. Yeah, there was a C&W band that would play in a place called the Cave, which was underneath a building in my town. Some of my old partners in crime in those days would sneak down the steps, poke our heads into the door to see what sort of denizens would be present inside. The bartender saw us and yelled to get out a stay out ! Holy cow, we knew it was adults only allowed -- we just wanted to get a glimpse. Anyway, I don't think my old man paid more than 20 bucks. One of the fellows in my dad's Dixie Land band showed me some chords and how to tune it to pitch. Gawd forbid I ever break a string tuning it. I'm of the opinion these working musicians, such as they were had to drive to Billings, MT to get strings, etc. The strings were rusty, the windings we're coming off before I ever knew one had to change strings every once or twice in a year or two. But I had Peter, Paul and Mary to listen to and try in vain to figure out how they played those songs....By my senior year we had Dylan and Blowin' In the Wind. What fun learning how to play that, even with decrepit strings. Still nothing broke in those years. Somewhere in '66 and with a bit more knowledge about good guitars, I was stationed in California in the military, so was able to buy a Gibson J-50 new off the wall in a phenomenal music store in Sacramento. Ha, they even had guitar strings. I paid $250 for that J-50. Kept that gem for many decades until I had to sell it during Dubya Bush's tenure due to financial hardships. It broke my heart -- it was like a beloved lady leaving me. Elderly in Michigan gave me $1,880 for it. Vintage, ya know and well cared for. That's my guitar story. Never replaced it -- discovered the mandolin instead. Cheers, brother. Bob in Montana. 😃😁🍺🍅❤️☮️
Your opening monolog I think is spot on when it comes to thought processes around this type of instrument and it's owner.
One of the most informative repair specialists on youtube. Just the first 4 minutes of this video is filled with great tidbits of knowledge.
This is the best RUclips channel that I have dug into in a while. It’s been like 1 week, 30+ hours of watch time , and I feel like I’ve learned more about not just guitar repair, but guitar history and culture, than I have on any other formant .
3:10 , Peter Griffin turns up and makes a low ball offer 😂
Excellent workmanship as always. 👍
Great video. I like the pace and the way you explain things. For those press in tuner bushings on many older, less expensive guitars I"ve found that small metal grommets that you can buy at fabric or sewing stores are an exact replacement, especially on Harmonys, Kays, Stellas, etc. They are very inexpensive and they come in many small sizes
Whoever thumbs these vids down are miserable souls
According to the guitar tech who sorted out my Hofner Congress, they were shipped from the Hofner factory without being set up, the retailer was supposed to do that but they rarely did.
Its not just the learning that is good from you, its also the experience you carry to us. Many cannot afford the repairs and don't know how valuable this is. God bless ya!
I picked up a Silvertone and Kay archtop at estate sale for $10 dollar each. They're in for repair right now. 40 and 50 dollars to repair. So appreciate your comments on the worth of repairing theses things. Just trying to get them playable. They are good wall ornaments! Thanks, enjoy watching your channel.
Wow! There is some seriously thoughtful and careful craftsmanship on display in this video. Of course, it's what we've come to expect from you, Twoodfrd. It is a pleasure to watch you work, sir. I love seeing these old wall-hangers coming back to life. It probably plays and sounds better now than it ever did. Thanks for making these videos!
Hi Gang. :-). This should be on a t-shirt.
Great stuff! I’ve been to the original factory in.Bubenreuth and the new one(they moved in the late 60’s but still call it the new one..) in Haganu. They have a lot of cellulose nitrate from the 50’s & 60’s saved that was used for inlays! Really nice folks!
Tom, you give such thoughtful explanations. You are an excellent teacher. Thank you from Saskatchewan.
You also have to take into account the sentimental value to the customer. I have repaired many guitars that customers have been told are not worth repairing because the tech decided that it wasn't worth the effort or cost. I just did one of these Hofner's a few months ago. It was the sentimental value that made it worthwhile doing. Every guitar has a story and some are amazing.
Interesting that he would mention about the changing dimensions of the ball ends of strings over years and it just so happens that the diamond string factory in New Brunswick New Jersey renovated the building and gave me all the lumber they pulled out of the building but in doing so I ended up with tons of ball ends dating back to the 1800s and whatever that's worth I'll just say good night
Thanks again for the effort that goes into letting us all watch you work. We really appreciate it.
I have learned more from your channel than all the other luthiery channels combined.
I love listening to your thinking process. To me, I want to play the guitar. I'm not a collector.
Fantastic watching for an amateur luthier...enjoying learning in my 50s!
I had to reset the neck and re attach one of the top struts on my old Framus archtop I rescued . You can't really get super slinky action on these old girls, they never had it back in the day. Yep when changing strings, the ball ends get well stuck, suspect that ball ends have changed over time. Love your videos :)
Lovely Vintage Mother-of-Toilet-Seat! That is hands down, the single most hilarious one-liner on RUclips. Thank you for your service!
Everybody calls it 'Mother of Toilet-Seat', ffs....
@@stavrospapadimitriou7631 Yep, I've been hearing that since the 70s.
I had a 1950s Hofner Senator arch top back in the early 1960s so I’ve found this video even more enjoyable than usual. My guitar had a three piece neck but no adjustable truss rod, (I don’t know if it had a bar in the neck). It had a Hofner single coil pickup which attached to the end of the neck and I actually used the guitar to play several gigs with the beat group I was in at the time. I remember that it had a really heavy action despite me sanding down the bridge so it was really hard on the fingers. Although it was a fabulously good looking instrument I very quickly traded in part exchange for a nice red Hofner Colorama solid, although not the finest guitar in the world it didn’t sound completely horrible and got me through a summer holiday season playing 6 gigs a week at holiday parks without shredding my fingers.
Love your work! First time getting in so early as well
Interesting to hear fish glue being used in metals inlay. I like using it when I due frets👍🏻
It's my favorite for fretting too.
Thank you so much for these videos! I am not a guitar repair guy...but I think guitars are beautiful...and I play a little. Your obvious passion and skill coupled with your calm demeanour makes for a fantastic companion to my morning coffee.
Love your channel, love what you do and the respect and professional way you go about any repairs you do, it's so nice to see someone who cares about their work. And hi from Wales UK.
These videos are so satisfying and relaxing to watch. Plus, I learn a lot.
At 13:35, although I often cut screws and bolts shorter with the Dremel tool, some electrical crimpers have a set of built-in threaded cut-offs for #4, 6, 8 and 10 (SAE) screws that gives you a clean, essentially burr-free edge to the shortened screw. You can also buy crimpers with metric-thread cutoffs but those are much harder to find and typically a bit more expensive.
Beautiful tone - had no idea. I'm sure the owner is pleased. Great work and a joy to watch your inventiveness and precision.
I’m trying to lower the action on a vintage electric Kay and this video is going to help me so much. Thank you!
It is so enjoyable to watch you work. Thank you so much for sharing! Cheers.
A have a 1960 Framus which apart from having a cutaway is almost identical. Action was very high on this, I made a new bridge out of ebony to sort this. Also, gave it a refret, installed electrics and now it plays great.
Really inventive solution on that pickguard! Love it!
"If Stuart stays 'ere with Astrid, Means one of us'll ave to play bass!"
(John and George start staring at their shoes...)
Mother-of-toilet-seat is the boutiquest material to craft from.
had one, her name was lulu. Could only keep 2 strings in tune. a great bass guitar. one day I took off the strings and found that the neck had broken and was kept by the strings.,heavy strings and trying to keep up with the volume. She went to guitar heaven
Just fantastic content. That you give your experience away for free is a wonderful thing. Thank you.
I know you can't read everything you get - just wanted to say though that I love the channel and your commentary - very droll and witty, lots of eclectic asides and observations! I have binged your videos HARD, and love, love the channel. Thanks so much. I am also learning a tremendous amount - I am a woodworker and hobbyist, and am thinking of doing a kit or finding a guitar to repair/rebuild for fun. Cheers from NH, USA!
Wonderful work. Super lucid descriptions. Top Hole, all round !. Marvellous !. Greetings From Scotland.
Little bits add up. It sounds better than I expected. Thanks much for this.
This is the exact video I needed to help lower my 58 senator bridge. Thanks so much.
"Hey, Rocky -- watch Ted pull a rabbit out of his hat!" Amazing save, bruh!
I like the commentary regarding the value vs. the cost of the repairs.
Thanks for this mate, I have a 456 and was trying to fix a couple of these issues myself.
Hands down, the best structured and we'll thought out guitar fix video I have found!
I'm missing the strap button from the bottom of my hofner and I'm not sure how to fix it / whether the fix is worth the risk of breaking it, it seems like the join where the strap button was is pretty vulnerable.
No obligation to respond, but if anyone reads this and has a fix - I'm keen!
These old Hofner guitars and basses never used the type strap needing a strap button. Most used a strap that was tied in front of the nut, under the strings. McCartneys strap is actually this same style, only he tied it under the heel area of his bass. Brilliant idea even if it did make the bass a bit neck heavy.
Wow. I only started watching because my Dad has the same guitar...... Watched the whole vid, as I found it fascinating. Thank you 👍
Not only am i a fan of your work, im also a fan of your playing demonstrations. Youre completely skilled
Your steady hands are to be admired!
Another fascinating video. Watching you fix guitars is zen for me.
Great list of practical advice, thanks for the excellent video as usual
I'm learning so much from your inspirational videos, thanks 👍🌟🌟🌟🌟🌟
That would be a dream to find. Love the whole vibe of that rig. I do have a super nice 1957 Gibson ES125 that is in really good shape and plays so nice its sick. I snagged it from my brothers father in law for $1000 reciently, it was a super buy in my opinion. Wish one like this would come to me somehow.
U can find the missing bootlace ferrule by looking at old boots which is where these bits originally came from.
The "fit and finish" on this guitar resembles that of Harmony from the 50s. That makes sense.
Greetings from the Emerald Isle , love it.
Erin Go Bragh :)
I was holding my breath when he removed that scratch plate... whoa
I was amazed and appalled to see the way they mounted that pick guard. I think the guitar looks better with it off anyway.
That's really good advice on judging the customers on upside down jobs.
Great sound on that guitar and expertly repaired!
This is a really cool guitar. Surprisingly little sag in the top arch considering its age. I play a modern Hofner (Verythin Single Cut) and so I have a soft spot for them. Brilliantly conscientious resuscitation work and words of wisdom as always, sir. I almost dig the Freddie Green action in its original condition!
Just a tip re gluing binding in this situation I suggest using un thinned lacquer for the re adhesion
if any mishaps it can be wet sanded leveled and buffed..
Outstanding! It actually sounds great with you playing it. Yeah, its looking original still. Important for vintage class anything.
Once again thank you for a video and using metric system. It is exactly what I was looking for!
I have one of these and it had the same problem. I worked on the bridge,as you did ,but still the action was just to high , then one very cold night I heard a : ping ! Some time later I found the neck glue had given way and the neck was loose, I was able to ease the neck out and shim it , now plays beautifully.
It sounds as sweet as a nut, I’m going to look for one right now on the Bay , Great videos by the way, much love from the UK x
I’d call it sentiment vs fetishized. I still have the ‘77 Takamine F-360 (D-28 copy) that I bought new in junior high. It is the first guitar I ever bought and I still love it; it’s in great condition, and plays/sounds great.
When I bought it, the MSRP was $300 and I got it at a going out of business sale for $150. Now, if something were to happen it that would required $500 worth of luthier work, I wouldn’t give it a second thought. Yes, that’s likely twice it’s current value, but my “sentimental” connection to that instrument, is deep. I’ve owned/played it for 43 years.
Ted, nice to see you are one of only a small handful of luthiers that know the proper way to fill a bridge to an arch top, Jerry Rosa is among then. Thanks and cheers. Bob
That pick guard looks like it wants to shatter any second.
I love celluloid for picks, but it does suck for inlays and pickguards. Because it will inevitably start to decompose. It’s a nice disposable plastic though.
Vintage mother of toilet seat.😂😂😂 I'm laughing so hard I stared to cry. That was a good one.
Wow, what a gorgeous guitar. Too cool! Great job, as usual. 👍
I like your videos a lot. I appreciate the content and how you post often
Among my many guitars, I have a Hofner Congress (1965). a Senator (1959) and a President (1965) as well as a Framus (1964/5)...they're lovely to play..I really appreciate your attention to detail..... and I knew somehow you were going to suggest fish glue..!
I got a 55 456, 58 455 same as in this vid, 59 blond president & a 60 450.
I love your videos so much man, you’re an artist
Nice to watch you work, and it sounds great!
I really enjoy watching your handiwork you have many many skills
You must have the patience of a saint!
Just when Todd is done wowing us with his knowledge, train of thought and mechanical skill, working in the smallest scale, gives us a taste of one sweet like.
The camera set up of the dremel cutoff was most oddly satisfying to me
Hi there from Jim Paton in Fife, Scotland. I totally agree with your opinion of Hofners of this era.( I owned several of them). I think this one could be a Senator from the late fifties. The UK price new would have been £18 -18 shillings.
When you started talking which glue to use I immediately thought HHG. Good call I’ve used HHG on several of these kind of jobs.
Well done Ted. A very sympathetic solution.
From guitar "art" object to musical instrument. The world is a better place now.
10:35 I have a 60's Harmony Rocket that had the same problem with the ball ends getting stuck in the tailpiece.
I'm currently at the end of restoring a Club 40 which had a broken neck joint and had been butchered for humbuckers. Had the same issue with the tailpiece as I had to use a sacrificial sets of strings to set it up (neck reset so wanted to dial in the action and make sure it was actually salvageable before I started building pickup surrounds to cover the holes in the body from the bucker conversion). Both sets of strings stuck in the tailpiece, used Ernie Balls and then Thomastiks. I'm wondering if modern electric strings run a different sized ball end?
I'm only 39 so working on old stuff isn't my day to day but there must be a difference between modern and vintage strings ends rather than this just being a typical Hofner design problem?
Take the ball ends off another set of strings & slide one over each string so it drops on top of the attached string ball end. Problem solved.
I build and work on drums and any time I am going for a vintage WMP (white marine pearl) or am trying to match something from the 40s or 50s, Precision Drum Co. Services can print custom wraps and probably match anything your shooting for. Made from delmar. Just a heads up if you ever are in that route.
Two, one of the first things I do with trapeze tailpieces , is to glue a piece of leather underneath the leading edge to prevent the metal ever coming into contact with the top.
I love the intro!!!! Im sure not many people got it, but it really made me laugh, great!!!
Oh boy oh boy, another present under the tree! Good timing, 'cause I have an SS Stewart archtop on the bench I'm scratching my head over.
Again, WHO is that one guy? There's always one "thumbs down" on your videos. Do you do it yourself as sort of a "zen corner"?
I’m certain that there’s a group of people somewhere who do nothing but put thumbs down on every video on You Tube.
I’m catching up on loads of your videos. I have to say thank you for making me laugh at the start of this one … trying to work out if you were John or Paul :)
Great work, and great insight.
wait, what did you do about the missing tuning peg bushing?
allparts has both stamped sheet metal "vintage" bushings and even plain brass sleeves that would likely fit around that post. did you pull a key off to determine if those were even real bushings or just rings stuck on top of the peghead?
Damn, that things sounds great! Thank, Ted!
Excellent episode, beautiful sound on that guitar now👍🏻
I got a broken one exaclty like this one, just darker sunburst. I know its not finacially smart, but im a musician and it was my granddads guitar. So its not about the money, its for the sentimental value youknow. I asked a luthier for what the job would cost and its was all from 1000$ to 1500$
And im fine with that, it originaly belonged to my grandads brother who passed away many decaded ago. He has since taken care of it, well its not been looked after, so repairs will be needed. But from my perspective! Its worth it, just based on the pure family history it has.
Thanks for the headsup in the video!
-Mats Odin.
Awesome work Ted. I really enjoy your channel.
Very instructive. Good job!
Informative and interesting. Much appreciated.